indent the probestack inline assembly

1 files changed, 110 insertions, 110 deletions

diff --git a/library/compiler-builtins/compiler-builtins/src/probestack.rs b/library/compiler-builtins/compiler-builtins/src/probestack.rs
index 2375107e3d5..1441fd73b8d 100644
--- a/library/compiler-builtins/compiler-builtins/src/probestack.rs
+++ b/library/compiler-builtins/compiler-builtins/src/probestack.rs
@@ -84,56 +84,56 @@ pub unsafe extern "C" fn __rust_probestack() {
 
     core::arch::naked_asm!(
         "
-    .cfi_startproc
-    pushq  %rbp
-    .cfi_adjust_cfa_offset 8
-    .cfi_offset %rbp, -16
-    movq   %rsp, %rbp
-    .cfi_def_cfa_register %rbp
-
-    mov    %rax,%r11        // duplicate %rax as we're clobbering %r11
-
-    // Main loop, taken in one page increments. We're decrementing rsp by
-    // a page each time until there's less than a page remaining. We're
-    // guaranteed that this function isn't called unless there's more than a
-    // page needed.
-    //
-    // Note that we're also testing against `8(%rsp)` to account for the 8
-    // bytes pushed on the stack orginally with our return address. Using
-    // `8(%rsp)` simulates us testing the stack pointer in the caller's
-    // context.
-
-    // It's usually called when %rax >= 0x1000, but that's not always true.
-    // Dynamic stack allocation, which is needed to implement unsized
-    // rvalues, triggers stackprobe even if %rax < 0x1000.
-    // Thus we have to check %r11 first to avoid segfault.
-    cmp    $0x1000,%r11
-    jna    3f
-2:
-    sub    $0x1000,%rsp
-    test   %rsp,8(%rsp)
-    sub    $0x1000,%r11
-    cmp    $0x1000,%r11
-    ja     2b
-
-3:
-    // Finish up the last remaining stack space requested, getting the last
-    // bits out of r11
-    sub    %r11,%rsp
-    test   %rsp,8(%rsp)
-
-    // Restore the stack pointer to what it previously was when entering
-    // this function. The caller will readjust the stack pointer after we
-    // return.
-    add    %rax,%rsp
-
-    leave
-    .cfi_def_cfa_register %rsp
-    .cfi_adjust_cfa_offset -8
+            .cfi_startproc
+            pushq  %rbp
+            .cfi_adjust_cfa_offset 8
+            .cfi_offset %rbp, -16
+            movq   %rsp, %rbp
+            .cfi_def_cfa_register %rbp
+
+            mov    %rax,%r11        // duplicate %rax as we're clobbering %r11
+
+            // Main loop, taken in one page increments. We're decrementing rsp by
+            // a page each time until there's less than a page remaining. We're
+            // guaranteed that this function isn't called unless there's more than a
+            // page needed.
+            //
+            // Note that we're also testing against `8(%rsp)` to account for the 8
+            // bytes pushed on the stack orginally with our return address. Using
+            // `8(%rsp)` simulates us testing the stack pointer in the caller's
+            // context.
+
+            // It's usually called when %rax >= 0x1000, but that's not always true.
+            // Dynamic stack allocation, which is needed to implement unsized
+            // rvalues, triggers stackprobe even if %rax < 0x1000.
+            // Thus we have to check %r11 first to avoid segfault.
+            cmp    $0x1000,%r11
+            jna    3f
+        2:
+            sub    $0x1000,%rsp
+            test   %rsp,8(%rsp)
+            sub    $0x1000,%r11
+            cmp    $0x1000,%r11
+            ja     2b
+
+        3:
+            // Finish up the last remaining stack space requested, getting the last
+            // bits out of r11
+            sub    %r11,%rsp
+            test   %rsp,8(%rsp)
+
+            // Restore the stack pointer to what it previously was when entering
+            // this function. The caller will readjust the stack pointer after we
+            // return.
+            add    %rax,%rsp
+
+            leave
+            .cfi_def_cfa_register %rsp
+            .cfi_adjust_cfa_offset -8
     ",
         ret!(),
         "
-    .cfi_endproc
+            .cfi_endproc
     ",
         options(att_syntax)
     )
@@ -153,35 +153,35 @@ pub unsafe extern "C" fn __rust_probestack() {
 pub unsafe extern "C" fn __rust_probestack() {
     core::arch::naked_asm!(
         "
-    .cfi_startproc
-    push   %ebp
-    .cfi_adjust_cfa_offset 4
-    .cfi_offset %ebp, -8
-    mov    %esp, %ebp
-    .cfi_def_cfa_register %ebp
-    push   %ecx
-    mov    %eax,%ecx
-
-    cmp    $0x1000,%ecx
-    jna    3f
-2:
-    sub    $0x1000,%esp
-    test   %esp,8(%esp)
-    sub    $0x1000,%ecx
-    cmp    $0x1000,%ecx
-    ja     2b
-
-3:
-    sub    %ecx,%esp
-    test   %esp,8(%esp)
-
-    add    %eax,%esp
-    pop    %ecx
-    leave
-    .cfi_def_cfa_register %esp
-    .cfi_adjust_cfa_offset -4
-    ret
-    .cfi_endproc
+            .cfi_startproc
+            push   %ebp
+            .cfi_adjust_cfa_offset 4
+            .cfi_offset %ebp, -8
+            mov    %esp, %ebp
+            .cfi_def_cfa_register %ebp
+            push   %ecx
+            mov    %eax,%ecx
+
+            cmp    $0x1000,%ecx
+            jna    3f
+        2:
+            sub    $0x1000,%esp
+            test   %esp,8(%esp)
+            sub    $0x1000,%ecx
+            cmp    $0x1000,%ecx
+            ja     2b
+
+        3:
+            sub    %ecx,%esp
+            test   %esp,8(%esp)
+
+            add    %eax,%esp
+            pop    %ecx
+            leave
+            .cfi_def_cfa_register %esp
+            .cfi_adjust_cfa_offset -4
+            ret
+            .cfi_endproc
     ",
         options(att_syntax)
     )
@@ -206,40 +206,40 @@ pub unsafe extern "C" fn __rust_probestack() {
 pub unsafe extern "C" fn __rust_probestack() {
     core::arch::naked_asm!(
         "
-    .cfi_startproc
-    push   %ebp
-    .cfi_adjust_cfa_offset 4
-    .cfi_offset %ebp, -8
-    mov    %esp, %ebp
-    .cfi_def_cfa_register %ebp
-    push   %ecx
-    push   %edx
-    mov    %eax,%ecx
-
-    cmp    $0x1000,%ecx
-    jna    3f
-2:
-    sub    $0x1000,%esp
-    test   %esp,8(%esp)
-    sub    $0x1000,%ecx
-    cmp    $0x1000,%ecx
-    ja     2b
-
-3:
-    sub    %ecx,%esp
-    test   %esp,8(%esp)
-    mov    4(%ebp),%edx
-    mov    %edx, 12(%esp)
-    add    %eax,%esp
-    pop    %edx
-    pop    %ecx
-    leave
-
-    sub   %eax, %esp
-    .cfi_def_cfa_register %esp
-    .cfi_adjust_cfa_offset -4
-    ret
-    .cfi_endproc
+            .cfi_startproc
+            push   %ebp
+            .cfi_adjust_cfa_offset 4
+            .cfi_offset %ebp, -8
+            mov    %esp, %ebp
+            .cfi_def_cfa_register %ebp
+            push   %ecx
+            push   %edx
+            mov    %eax,%ecx
+
+            cmp    $0x1000,%ecx
+            jna    3f
+        2:
+            sub    $0x1000,%esp
+            test   %esp,8(%esp)
+            sub    $0x1000,%ecx
+            cmp    $0x1000,%ecx
+            ja     2b
+
+        3:
+            sub    %ecx,%esp
+            test   %esp,8(%esp)
+            mov    4(%ebp),%edx
+            mov    %edx, 12(%esp)
+            add    %eax,%esp
+            pop    %edx
+            pop    %ecx
+            leave
+
+            sub   %eax, %esp
+            .cfi_def_cfa_register %esp
+            .cfi_adjust_cfa_offset -4
+            ret
+            .cfi_endproc
     ",
         options(att_syntax)
     )