diff options
23 files changed, 836 insertions, 459 deletions
diff --git a/library/coretests/tests/floats/mod.rs b/library/coretests/tests/floats/mod.rs index 7e27028a2a2..f9b6c85f871 100644 --- a/library/coretests/tests/floats/mod.rs +++ b/library/coretests/tests/floats/mod.rs @@ -52,6 +52,119 @@ macro_rules! assert_biteq { }; } +mod const_asserts { + // Shadow some assert implementations that would otherwise not compile in a const-context. + // Every macro added here also needs to be added in the `float_test!` macro below. + macro_rules! assert_eq { + ($left:expr, $right:expr $(,)?) => { + std::assert!($left == $right) + }; + ($left:expr, $right:expr, $($arg:tt)+) => { + std::assert!($left == $right, $($arg)+) + }; + } + + pub(crate) use assert_eq; +} + +/// Generate float tests for all our float types, for compile-time and run-time behavior. +/// +/// By default all tests run for all float types. Configuration can be applied via `attrs`. +/// +/// ```ignore (this is only a sketch) +/// float_test! { +/// name: fn_name, /* function under test */ +/// attrs: { +/// // Apply a configuration to the test for a single type +/// f16: #[cfg(target_has_reliable_f16_math)], +/// // Types can be excluded with `cfg(false)` +/// f64: #[cfg(false)], +/// }, +/// test<Float> { +/// /* write tests here, using `Float` as the type */ +/// } +/// } +macro_rules! float_test { + ( + name: $name:ident, + attrs: { + $(const: #[ $($const_meta:meta),+ ] ,)? + $(f16: #[ $($f16_meta:meta),+ ] ,)? + $(const f16: #[ $($f16_const_meta:meta),+ ] ,)? + $(f32: #[ $($f32_meta:meta),+ ] ,)? + $(const f32: #[ $($f32_const_meta:meta),+ ] ,)? + $(f64: #[ $($f64_meta:meta),+ ] ,)? + $(const f64: #[ $($f64_const_meta:meta),+ ] ,)? + $(f128: #[ $($f128_meta:meta),+ ] ,)? + $(const f128: #[ $($f128_const_meta:meta),+ ] ,)? + }, + test<$fty:ident> $test:block + ) => { + mod $name { + #[test] + $( $( #[$f16_meta] )+ )? + fn test_f16() { + type $fty = f16; + $test + } + + #[test] + $( $( #[$f32_meta] )+ )? + fn test_f32() { + type $fty = f32; + $test + } + + #[test] + $( $( #[$f64_meta] )+ )? + fn test_f64() { + type $fty = f64; + $test + } + + #[test] + $( $( #[$f128_meta] )+ )? + fn test_f128() { + type $fty = f128; + $test + } + + $( $( #[$const_meta] )+ )? + mod const_ { + use $crate::floats::const_asserts::assert_eq; + + #[test] + $( $( #[$f16_const_meta] )+ )? + fn test_f16() { + type $fty = f16; + const { $test } + } + + #[test] + $( $( #[$f32_const_meta] )+ )? + fn test_f32() { + type $fty = f32; + const { $test } + } + + #[test] + $( $( #[$f64_const_meta] )+ )? + fn test_f64() { + type $fty = f64; + const { $test } + } + + #[test] + $( $( #[$f128_const_meta] )+ )? + fn test_f128() { + type $fty = f128; + const { $test } + } + } + } + }; +} + /// Helper function for testing numeric operations pub fn test_num<T>(ten: T, two: T) where @@ -75,3 +188,438 @@ mod f128; mod f16; mod f32; mod f64; + +float_test! { + name: min, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).min(0.0), 0.0); + assert!((0.0 as Float).min(0.0).is_sign_positive()); + assert_eq!((-0.0 as Float).min(-0.0), -0.0); + assert!((-0.0 as Float).min(-0.0).is_sign_negative()); + assert_eq!((9.0 as Float).min(9.0), 9.0); + assert_eq!((-9.0 as Float).min(0.0), -9.0); + assert_eq!((0.0 as Float).min(9.0), 0.0); + assert!((0.0 as Float).min(9.0).is_sign_positive()); + assert_eq!((-0.0 as Float).min(9.0), -0.0); + assert!((-0.0 as Float).min(9.0).is_sign_negative()); + assert_eq!((-0.0 as Float).min(-9.0), -9.0); + assert_eq!(Float::INFINITY.min(9.0), 9.0); + assert_eq!((9.0 as Float).min(Float::INFINITY), 9.0); + assert_eq!(Float::INFINITY.min(-9.0), -9.0); + assert_eq!((-9.0 as Float).min(Float::INFINITY), -9.0); + assert_eq!(Float::NEG_INFINITY.min(9.0), Float::NEG_INFINITY); + assert_eq!((9.0 as Float).min(Float::NEG_INFINITY), Float::NEG_INFINITY); + assert_eq!(Float::NEG_INFINITY.min(-9.0), Float::NEG_INFINITY); + assert_eq!((-9.0 as Float).min(Float::NEG_INFINITY), Float::NEG_INFINITY); + assert_eq!(Float::NAN.min(9.0), 9.0); + assert_eq!(Float::NAN.min(-9.0), -9.0); + assert_eq!((9.0 as Float).min(Float::NAN), 9.0); + assert_eq!((-9.0 as Float).min(Float::NAN), -9.0); + assert!(Float::NAN.min(Float::NAN).is_nan()); + } +} + +float_test! { + name: max, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).max(0.0), 0.0); + assert!((0.0 as Float).max(0.0).is_sign_positive()); + assert_eq!((-0.0 as Float).max(-0.0), -0.0); + assert!((-0.0 as Float).max(-0.0).is_sign_negative()); + assert_eq!((9.0 as Float).max(9.0), 9.0); + assert_eq!((-9.0 as Float).max(0.0), 0.0); + assert!((-9.0 as Float).max(0.0).is_sign_positive()); + assert_eq!((-9.0 as Float).max(-0.0), -0.0); + assert!((-9.0 as Float).max(-0.0).is_sign_negative()); + assert_eq!((0.0 as Float).max(9.0), 9.0); + assert_eq!((0.0 as Float).max(-9.0), 0.0); + assert!((0.0 as Float).max(-9.0).is_sign_positive()); + assert_eq!((-0.0 as Float).max(-9.0), -0.0); + assert!((-0.0 as Float).max(-9.0).is_sign_negative()); + assert_eq!(Float::INFINITY.max(9.0), Float::INFINITY); + assert_eq!((9.0 as Float).max(Float::INFINITY), Float::INFINITY); + assert_eq!(Float::INFINITY.max(-9.0), Float::INFINITY); + assert_eq!((-9.0 as Float).max(Float::INFINITY), Float::INFINITY); + assert_eq!(Float::NEG_INFINITY.max(9.0), 9.0); + assert_eq!((9.0 as Float).max(Float::NEG_INFINITY), 9.0); + assert_eq!(Float::NEG_INFINITY.max(-9.0), -9.0); + assert_eq!((-9.0 as Float).max(Float::NEG_INFINITY), -9.0); + assert_eq!(Float::NAN.max(9.0), 9.0); + assert_eq!(Float::NAN.max(-9.0), -9.0); + assert_eq!((9.0 as Float).max(Float::NAN), 9.0); + assert_eq!((-9.0 as Float).max(Float::NAN), -9.0); + assert!(Float::NAN.max(Float::NAN).is_nan()); + } +} + +float_test! { + name: minimum, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).minimum(0.0), 0.0); + assert!((0.0 as Float).minimum(0.0).is_sign_positive()); + assert_eq!((-0.0 as Float).minimum(0.0), -0.0); + assert!((-0.0 as Float).minimum(0.0).is_sign_negative()); + assert_eq!((-0.0 as Float).minimum(-0.0), -0.0); + assert!((-0.0 as Float).minimum(-0.0).is_sign_negative()); + assert_eq!((9.0 as Float).minimum(9.0), 9.0); + assert_eq!((-9.0 as Float).minimum(0.0), -9.0); + assert_eq!((0.0 as Float).minimum(9.0), 0.0); + assert!((0.0 as Float).minimum(9.0).is_sign_positive()); + assert_eq!((-0.0 as Float).minimum(9.0), -0.0); + assert!((-0.0 as Float).minimum(9.0).is_sign_negative()); + assert_eq!((-0.0 as Float).minimum(-9.0), -9.0); + assert_eq!(Float::INFINITY.minimum(9.0), 9.0); + assert_eq!((9.0 as Float).minimum(Float::INFINITY), 9.0); + assert_eq!(Float::INFINITY.minimum(-9.0), -9.0); + assert_eq!((-9.0 as Float).minimum(Float::INFINITY), -9.0); + assert_eq!(Float::NEG_INFINITY.minimum(9.0), Float::NEG_INFINITY); + assert_eq!((9.0 as Float).minimum(Float::NEG_INFINITY), Float::NEG_INFINITY); + assert_eq!(Float::NEG_INFINITY.minimum(-9.0), Float::NEG_INFINITY); + assert_eq!((-9.0 as Float).minimum(Float::NEG_INFINITY), Float::NEG_INFINITY); + assert!(Float::NAN.minimum(9.0).is_nan()); + assert!(Float::NAN.minimum(-9.0).is_nan()); + assert!((9.0 as Float).minimum(Float::NAN).is_nan()); + assert!((-9.0 as Float).minimum(Float::NAN).is_nan()); + assert!(Float::NAN.minimum(Float::NAN).is_nan()); + } +} + +float_test! { + name: maximum, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).maximum(0.0), 0.0); + assert!((0.0 as Float).maximum(0.0).is_sign_positive()); + assert_eq!((-0.0 as Float).maximum(0.0), 0.0); + assert!((-0.0 as Float).maximum(0.0).is_sign_positive()); + assert_eq!((-0.0 as Float).maximum(-0.0), -0.0); + assert!((-0.0 as Float).maximum(-0.0).is_sign_negative()); + assert_eq!((9.0 as Float).maximum(9.0), 9.0); + assert_eq!((-9.0 as Float).maximum(0.0), 0.0); + assert!((-9.0 as Float).maximum(0.0).is_sign_positive()); + assert_eq!((-9.0 as Float).maximum(-0.0), -0.0); + assert!((-9.0 as Float).maximum(-0.0).is_sign_negative()); + assert_eq!((0.0 as Float).maximum(9.0), 9.0); + assert_eq!((0.0 as Float).maximum(-9.0), 0.0); + assert!((0.0 as Float).maximum(-9.0).is_sign_positive()); + assert_eq!((-0.0 as Float).maximum(-9.0), -0.0); + assert!((-0.0 as Float).maximum(-9.0).is_sign_negative()); + assert_eq!(Float::INFINITY.maximum(9.0), Float::INFINITY); + assert_eq!((9.0 as Float).maximum(Float::INFINITY), Float::INFINITY); + assert_eq!(Float::INFINITY.maximum(-9.0), Float::INFINITY); + assert_eq!((-9.0 as Float).maximum(Float::INFINITY), Float::INFINITY); + assert_eq!(Float::NEG_INFINITY.maximum(9.0), 9.0); + assert_eq!((9.0 as Float).maximum(Float::NEG_INFINITY), 9.0); + assert_eq!(Float::NEG_INFINITY.maximum(-9.0), -9.0); + assert_eq!((-9.0 as Float).maximum(Float::NEG_INFINITY), -9.0); + assert!(Float::NAN.maximum(9.0).is_nan()); + assert!(Float::NAN.maximum(-9.0).is_nan()); + assert!((9.0 as Float).maximum(Float::NAN).is_nan()); + assert!((-9.0 as Float).maximum(Float::NAN).is_nan()); + assert!(Float::NAN.maximum(Float::NAN).is_nan()); + } +} + +float_test! { + name: midpoint, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.5 as Float).midpoint(0.5), 0.5); + assert_eq!((0.5 as Float).midpoint(2.5), 1.5); + assert_eq!((3.0 as Float).midpoint(4.0), 3.5); + assert_eq!((-3.0 as Float).midpoint(4.0), 0.5); + assert_eq!((3.0 as Float).midpoint(-4.0), -0.5); + assert_eq!((-3.0 as Float).midpoint(-4.0), -3.5); + assert_eq!((0.0 as Float).midpoint(0.0), 0.0); + assert_eq!((-0.0 as Float).midpoint(-0.0), -0.0); + assert_eq!((-5.0 as Float).midpoint(5.0), 0.0); + assert_eq!(Float::MAX.midpoint(Float::MIN), 0.0); + assert_eq!(Float::MIN.midpoint(Float::MAX), -0.0); + assert_eq!(Float::MAX.midpoint(Float::MIN_POSITIVE), Float::MAX / 2.); + assert_eq!((-Float::MAX).midpoint(Float::MIN_POSITIVE), -Float::MAX / 2.); + assert_eq!(Float::MAX.midpoint(-Float::MIN_POSITIVE), Float::MAX / 2.); + assert_eq!((-Float::MAX).midpoint(-Float::MIN_POSITIVE), -Float::MAX / 2.); + assert_eq!((Float::MIN_POSITIVE).midpoint(Float::MAX), Float::MAX / 2.); + assert_eq!((Float::MIN_POSITIVE).midpoint(-Float::MAX), -Float::MAX / 2.); + assert_eq!((-Float::MIN_POSITIVE).midpoint(Float::MAX), Float::MAX / 2.); + assert_eq!((-Float::MIN_POSITIVE).midpoint(-Float::MAX), -Float::MAX / 2.); + assert_eq!(Float::MAX.midpoint(Float::MAX), Float::MAX); + assert_eq!( + (Float::MIN_POSITIVE).midpoint(Float::MIN_POSITIVE), + Float::MIN_POSITIVE + ); + assert_eq!( + (-Float::MIN_POSITIVE).midpoint(-Float::MIN_POSITIVE), + -Float::MIN_POSITIVE + ); + assert_eq!(Float::MAX.midpoint(5.0), Float::MAX / 2.0 + 2.5); + assert_eq!(Float::MAX.midpoint(-5.0), Float::MAX / 2.0 - 2.5); + assert_eq!(Float::INFINITY.midpoint(Float::INFINITY), Float::INFINITY); + assert_eq!( + Float::NEG_INFINITY.midpoint(Float::NEG_INFINITY), + Float::NEG_INFINITY + ); + assert!(Float::NAN.midpoint(1.0).is_nan()); + assert!((1.0 as Float).midpoint(Float::NAN).is_nan()); + assert!(Float::NAN.midpoint(Float::NAN).is_nan()); + } +} + +// Separate test since the `for` loops cannot be run in `const`. +float_test! { + name: midpoint_large_magnitude, + attrs: { + const: #[cfg(false)], + // FIXME(f16_f128): `powi` does not work in Miri for these types + f16: #[cfg(all(not(miri), target_has_reliable_f16_math))], + f128: #[cfg(all(not(miri), target_has_reliable_f128_math))], + }, + test<Float> { + // test if large differences in magnitude are still correctly computed. + // NOTE: that because of how small x and y are, x + y can never overflow + // so (x + y) / 2.0 is always correct + // in particular, `2.pow(i)` will never be at the max exponent, so it could + // be safely doubled, while j is significantly smaller. + for i in Float::MAX_EXP.saturating_sub(64)..Float::MAX_EXP { + for j in 0..64u8 { + let large = (2.0 as Float).powi(i); + // a much smaller number, such that there is no chance of overflow to test + // potential double rounding in midpoint's implementation. + let small = (2.0 as Float).powi(Float::MAX_EXP - 1) + * Float::EPSILON + * Float::from(j); + + let naive = (large + small) / 2.0; + let midpoint = large.midpoint(small); + + assert_eq!(naive, midpoint); + } + } + } +} + +float_test! { + name: abs, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((-1.0 as Float).abs(), 1.0); + assert_eq!((1.0 as Float).abs(), 1.0); + assert_eq!(Float::NEG_INFINITY.abs(), Float::INFINITY); + assert_eq!(Float::INFINITY.abs(), Float::INFINITY); + } +} + +float_test! { + name: copysign, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((1.0 as Float).copysign(-2.0), -1.0); + assert_eq!((-1.0 as Float).copysign(2.0), 1.0); + assert_eq!(Float::INFINITY.copysign(-0.0), Float::NEG_INFINITY); + assert_eq!(Float::NEG_INFINITY.copysign(0.0), Float::INFINITY); + } +} + +float_test! { + name: rem_euclid, + attrs: { + const: #[cfg(false)], + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert!(Float::INFINITY.rem_euclid(42.0 as Float).is_nan()); + assert_eq!((42.0 as Float).rem_euclid(Float::INFINITY), (42.0 as Float)); + assert!((42.0 as Float).rem_euclid(Float::NAN).is_nan()); + assert!(Float::INFINITY.rem_euclid(Float::INFINITY).is_nan()); + assert!(Float::INFINITY.rem_euclid(Float::NAN).is_nan()); + assert!(Float::NAN.rem_euclid(Float::INFINITY).is_nan()); + } +} + +float_test! { + name: div_euclid, + attrs: { + const: #[cfg(false)], + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((42.0 as Float).div_euclid(Float::INFINITY), 0.0); + assert!((42.0 as Float).div_euclid(Float::NAN).is_nan()); + assert!(Float::INFINITY.div_euclid(Float::INFINITY).is_nan()); + assert!(Float::INFINITY.div_euclid(Float::NAN).is_nan()); + assert!(Float::NAN.div_euclid(Float::INFINITY).is_nan()); + } +} + +float_test! { + name: floor, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).floor(), 0.0); + assert!((0.0 as Float).floor().is_sign_positive()); + assert_eq!((-0.0 as Float).floor(), -0.0); + assert!((-0.0 as Float).floor().is_sign_negative()); + assert_eq!((0.5 as Float).floor(), 0.0); + assert_eq!((-0.5 as Float).floor(), -1.0); + assert_eq!((1.5 as Float).floor(), 1.0); + assert_eq!(Float::MAX.floor(), Float::MAX); + assert_eq!(Float::MIN.floor(), Float::MIN); + assert_eq!(Float::MIN_POSITIVE.floor(), 0.0); + assert_eq!((-Float::MIN_POSITIVE).floor(), -1.0); + assert!(Float::NAN.floor().is_nan()); + assert_eq!(Float::INFINITY.floor(), Float::INFINITY); + assert_eq!(Float::NEG_INFINITY.floor(), Float::NEG_INFINITY); + } +} + +float_test! { + name: ceil, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).ceil(), 0.0); + assert!((0.0 as Float).ceil().is_sign_positive()); + assert_eq!((-0.0 as Float).ceil(), 0.0); + assert!((-0.0 as Float).ceil().is_sign_negative()); + assert_eq!((0.5 as Float).ceil(), 1.0); + assert_eq!((-0.5 as Float).ceil(), 0.0); + assert_eq!(Float::MAX.ceil(), Float::MAX); + assert_eq!(Float::MIN.ceil(), Float::MIN); + assert_eq!(Float::MIN_POSITIVE.ceil(), 1.0); + assert_eq!((-Float::MIN_POSITIVE).ceil(), 0.0); + assert!(Float::NAN.ceil().is_nan()); + assert_eq!(Float::INFINITY.ceil(), Float::INFINITY); + assert_eq!(Float::NEG_INFINITY.ceil(), Float::NEG_INFINITY); + } +} + +float_test! { + name: round, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).round(), 0.0); + assert!((0.0 as Float).round().is_sign_positive()); + assert_eq!((-0.0 as Float).round(), -0.0); + assert!((-0.0 as Float).round().is_sign_negative()); + assert_eq!((0.5 as Float).round(), 1.0); + assert_eq!((-0.5 as Float).round(), -1.0); + assert_eq!(Float::MAX.round(), Float::MAX); + assert_eq!(Float::MIN.round(), Float::MIN); + assert_eq!(Float::MIN_POSITIVE.round(), 0.0); + assert_eq!((-Float::MIN_POSITIVE).round(), 0.0); + assert!(Float::NAN.round().is_nan()); + assert_eq!(Float::INFINITY.round(), Float::INFINITY); + assert_eq!(Float::NEG_INFINITY.round(), Float::NEG_INFINITY); + } +} + +float_test! { + name: round_ties_even, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).round_ties_even(), 0.0); + assert!((0.0 as Float).round_ties_even().is_sign_positive()); + assert_eq!((-0.0 as Float).round_ties_even(), -0.0); + assert!((-0.0 as Float).round_ties_even().is_sign_negative()); + assert_eq!((0.5 as Float).round_ties_even(), 0.0); + assert!((0.5 as Float).round_ties_even().is_sign_positive()); + assert_eq!((-0.5 as Float).round_ties_even(), -0.0); + assert!((-0.5 as Float).round_ties_even().is_sign_negative()); + assert_eq!(Float::MAX.round_ties_even(), Float::MAX); + assert_eq!(Float::MIN.round_ties_even(), Float::MIN); + assert_eq!(Float::MIN_POSITIVE.round_ties_even(), 0.0); + assert_eq!((-Float::MIN_POSITIVE).round_ties_even(), 0.0); + assert!(Float::NAN.round_ties_even().is_nan()); + assert_eq!(Float::INFINITY.round_ties_even(), Float::INFINITY); + assert_eq!(Float::NEG_INFINITY.round_ties_even(), Float::NEG_INFINITY); + } +} + +float_test! { + name: trunc, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).trunc(), 0.0); + assert!((0.0 as Float).trunc().is_sign_positive()); + assert_eq!((-0.0 as Float).trunc(), -0.0); + assert!((-0.0 as Float).trunc().is_sign_negative()); + assert_eq!((0.5 as Float).trunc(), 0.0); + assert!((0.5 as Float).trunc().is_sign_positive()); + assert_eq!((-0.5 as Float).trunc(), -0.0); + assert!((-0.5 as Float).trunc().is_sign_negative()); + assert_eq!(Float::MAX.trunc(), Float::MAX); + assert_eq!(Float::MIN.trunc(), Float::MIN); + assert_eq!(Float::MIN_POSITIVE.trunc(), 0.0); + assert_eq!((-Float::MIN_POSITIVE).trunc(), 0.0); + assert!(Float::NAN.trunc().is_nan()); + assert_eq!(Float::INFINITY.trunc(), Float::INFINITY); + assert_eq!(Float::NEG_INFINITY.trunc(), Float::NEG_INFINITY); + } +} + +float_test! { + name: fract, + attrs: { + f16: #[cfg(any(miri, target_has_reliable_f16_math))], + f128: #[cfg(any(miri, target_has_reliable_f128_math))], + }, + test<Float> { + assert_eq!((0.0 as Float).fract(), 0.0); + assert!((0.0 as Float).fract().is_sign_positive()); + assert_eq!((-0.0 as Float).fract(), 0.0); + assert!((-0.0 as Float).fract().is_sign_positive()); + assert_eq!((0.5 as Float).fract(), 0.5); + assert!((0.5 as Float).fract().is_sign_positive()); + assert_eq!((-0.5 as Float).fract(), -0.5); + assert!((-0.5 as Float).fract().is_sign_negative()); + assert_eq!(Float::MAX.fract(), 0.0); + assert_eq!(Float::MIN.fract(), 0.0); + assert_eq!(Float::MIN_POSITIVE.fract(), Float::MIN_POSITIVE); + assert!(Float::MIN_POSITIVE.fract().is_sign_positive()); + assert_eq!((-Float::MIN_POSITIVE).fract(), -Float::MIN_POSITIVE); + assert!((-Float::MIN_POSITIVE).fract().is_sign_negative()); + assert!(Float::NAN.fract().is_nan()); + assert!(Float::INFINITY.fract().is_nan()); + assert!(Float::NEG_INFINITY.fract().is_nan()); + } +} diff --git a/library/coretests/tests/num/mod.rs b/library/coretests/tests/num/mod.rs index c68b569f86b..6611aa57866 100644 --- a/library/coretests/tests/num/mod.rs +++ b/library/coretests/tests/num/mod.rs @@ -730,356 +730,3 @@ assume_usize_width! { } } } - -// FIXME(141726): there is a lot of duplication between the following tests and -// the tests in `coretests/tests/floats/f*.rs` -// See issue https://github.com/rust-lang/rust/issues/141726 for more details. -macro_rules! test_float { - ($modname: ident, $fassert: ident, $fty: ty) => { - mod $modname { - #[test] - fn min() { - $fassert!((0.0 as $fty).min(0.0), 0.0); - $fassert!((0.0 as $fty).min(0.0).is_sign_positive()); - $fassert!((-0.0 as $fty).min(-0.0), -0.0); - $fassert!((-0.0 as $fty).min(-0.0).is_sign_negative()); - $fassert!((9.0 as $fty).min(9.0), 9.0); - $fassert!((-9.0 as $fty).min(0.0), -9.0); - $fassert!((0.0 as $fty).min(9.0), 0.0); - $fassert!((0.0 as $fty).min(9.0).is_sign_positive()); - $fassert!((-0.0 as $fty).min(9.0), -0.0); - $fassert!((-0.0 as $fty).min(9.0).is_sign_negative()); - $fassert!((-0.0 as $fty).min(-9.0), -9.0); - $fassert!(<$fty>::INFINITY.min(9.0), 9.0); - $fassert!((9.0 as $fty).min(<$fty>::INFINITY), 9.0); - $fassert!(<$fty>::INFINITY.min(-9.0), -9.0); - $fassert!((-9.0 as $fty).min(<$fty>::INFINITY), -9.0); - $fassert!(<$fty>::NEG_INFINITY.min(9.0), <$fty>::NEG_INFINITY); - $fassert!((9.0 as $fty).min(<$fty>::NEG_INFINITY), <$fty>::NEG_INFINITY); - $fassert!(<$fty>::NEG_INFINITY.min(-9.0), <$fty>::NEG_INFINITY); - $fassert!((-9.0 as $fty).min(<$fty>::NEG_INFINITY), <$fty>::NEG_INFINITY); - $fassert!(<$fty>::NAN.min(9.0), 9.0); - $fassert!(<$fty>::NAN.min(-9.0), -9.0); - $fassert!((9.0 as $fty).min(<$fty>::NAN), 9.0); - $fassert!((-9.0 as $fty).min(<$fty>::NAN), -9.0); - $fassert!(<$fty>::NAN.min(<$fty>::NAN).is_nan()); - } - #[test] - fn max() { - $fassert!((0.0 as $fty).max(0.0), 0.0); - $fassert!((0.0 as $fty).max(0.0).is_sign_positive()); - $fassert!((-0.0 as $fty).max(-0.0), -0.0); - $fassert!((-0.0 as $fty).max(-0.0).is_sign_negative()); - $fassert!((9.0 as $fty).max(9.0), 9.0); - $fassert!((-9.0 as $fty).max(0.0), 0.0); - $fassert!((-9.0 as $fty).max(0.0).is_sign_positive()); - $fassert!((-9.0 as $fty).max(-0.0), -0.0); - $fassert!((-9.0 as $fty).max(-0.0).is_sign_negative()); - $fassert!((0.0 as $fty).max(9.0), 9.0); - $fassert!((0.0 as $fty).max(-9.0), 0.0); - $fassert!((0.0 as $fty).max(-9.0).is_sign_positive()); - $fassert!((-0.0 as $fty).max(-9.0), -0.0); - $fassert!((-0.0 as $fty).max(-9.0).is_sign_negative()); - $fassert!(<$fty>::INFINITY.max(9.0), <$fty>::INFINITY); - $fassert!((9.0 as $fty).max(<$fty>::INFINITY), <$fty>::INFINITY); - $fassert!(<$fty>::INFINITY.max(-9.0), <$fty>::INFINITY); - $fassert!((-9.0 as $fty).max(<$fty>::INFINITY), <$fty>::INFINITY); - $fassert!(<$fty>::NEG_INFINITY.max(9.0), 9.0); - $fassert!((9.0 as $fty).max(<$fty>::NEG_INFINITY), 9.0); - $fassert!(<$fty>::NEG_INFINITY.max(-9.0), -9.0); - $fassert!((-9.0 as $fty).max(<$fty>::NEG_INFINITY), -9.0); - $fassert!(<$fty>::NAN.max(9.0), 9.0); - $fassert!(<$fty>::NAN.max(-9.0), -9.0); - $fassert!((9.0 as $fty).max(<$fty>::NAN), 9.0); - $fassert!((-9.0 as $fty).max(<$fty>::NAN), -9.0); - $fassert!(<$fty>::NAN.max(<$fty>::NAN).is_nan()); - } - #[test] - fn minimum() { - $fassert!((0.0 as $fty).minimum(0.0), 0.0); - $fassert!((0.0 as $fty).minimum(0.0).is_sign_positive()); - $fassert!((-0.0 as $fty).minimum(0.0), -0.0); - $fassert!((-0.0 as $fty).minimum(0.0).is_sign_negative()); - $fassert!((-0.0 as $fty).minimum(-0.0), -0.0); - $fassert!((-0.0 as $fty).minimum(-0.0).is_sign_negative()); - $fassert!((9.0 as $fty).minimum(9.0), 9.0); - $fassert!((-9.0 as $fty).minimum(0.0), -9.0); - $fassert!((0.0 as $fty).minimum(9.0), 0.0); - $fassert!((0.0 as $fty).minimum(9.0).is_sign_positive()); - $fassert!((-0.0 as $fty).minimum(9.0), -0.0); - $fassert!((-0.0 as $fty).minimum(9.0).is_sign_negative()); - $fassert!((-0.0 as $fty).minimum(-9.0), -9.0); - $fassert!(<$fty>::INFINITY.minimum(9.0), 9.0); - $fassert!((9.0 as $fty).minimum(<$fty>::INFINITY), 9.0); - $fassert!(<$fty>::INFINITY.minimum(-9.0), -9.0); - $fassert!((-9.0 as $fty).minimum(<$fty>::INFINITY), -9.0); - $fassert!(<$fty>::NEG_INFINITY.minimum(9.0), <$fty>::NEG_INFINITY); - $fassert!((9.0 as $fty).minimum(<$fty>::NEG_INFINITY), <$fty>::NEG_INFINITY); - $fassert!(<$fty>::NEG_INFINITY.minimum(-9.0), <$fty>::NEG_INFINITY); - $fassert!((-9.0 as $fty).minimum(<$fty>::NEG_INFINITY), <$fty>::NEG_INFINITY); - $fassert!(<$fty>::NAN.minimum(9.0).is_nan()); - $fassert!(<$fty>::NAN.minimum(-9.0).is_nan()); - $fassert!((9.0 as $fty).minimum(<$fty>::NAN).is_nan()); - $fassert!((-9.0 as $fty).minimum(<$fty>::NAN).is_nan()); - $fassert!(<$fty>::NAN.minimum(<$fty>::NAN).is_nan()); - } - #[test] - fn maximum() { - $fassert!((0.0 as $fty).maximum(0.0), 0.0); - $fassert!((0.0 as $fty).maximum(0.0).is_sign_positive()); - $fassert!((-0.0 as $fty).maximum(0.0), 0.0); - $fassert!((-0.0 as $fty).maximum(0.0).is_sign_positive()); - $fassert!((-0.0 as $fty).maximum(-0.0), -0.0); - $fassert!((-0.0 as $fty).maximum(-0.0).is_sign_negative()); - $fassert!((9.0 as $fty).maximum(9.0), 9.0); - $fassert!((-9.0 as $fty).maximum(0.0), 0.0); - $fassert!((-9.0 as $fty).maximum(0.0).is_sign_positive()); - $fassert!((-9.0 as $fty).maximum(-0.0), -0.0); - $fassert!((-9.0 as $fty).maximum(-0.0).is_sign_negative()); - $fassert!((0.0 as $fty).maximum(9.0), 9.0); - $fassert!((0.0 as $fty).maximum(-9.0), 0.0); - $fassert!((0.0 as $fty).maximum(-9.0).is_sign_positive()); - $fassert!((-0.0 as $fty).maximum(-9.0), -0.0); - $fassert!((-0.0 as $fty).maximum(-9.0).is_sign_negative()); - $fassert!(<$fty>::INFINITY.maximum(9.0), <$fty>::INFINITY); - $fassert!((9.0 as $fty).maximum(<$fty>::INFINITY), <$fty>::INFINITY); - $fassert!(<$fty>::INFINITY.maximum(-9.0), <$fty>::INFINITY); - $fassert!((-9.0 as $fty).maximum(<$fty>::INFINITY), <$fty>::INFINITY); - $fassert!(<$fty>::NEG_INFINITY.maximum(9.0), 9.0); - $fassert!((9.0 as $fty).maximum(<$fty>::NEG_INFINITY), 9.0); - $fassert!(<$fty>::NEG_INFINITY.maximum(-9.0), -9.0); - $fassert!((-9.0 as $fty).maximum(<$fty>::NEG_INFINITY), -9.0); - $fassert!(<$fty>::NAN.maximum(9.0).is_nan()); - $fassert!(<$fty>::NAN.maximum(-9.0).is_nan()); - $fassert!((9.0 as $fty).maximum(<$fty>::NAN).is_nan()); - $fassert!((-9.0 as $fty).maximum(<$fty>::NAN).is_nan()); - $fassert!(<$fty>::NAN.maximum(<$fty>::NAN).is_nan()); - } - #[test] - fn midpoint() { - $fassert!((0.5 as $fty).midpoint(0.5), 0.5); - $fassert!((0.5 as $fty).midpoint(2.5), 1.5); - $fassert!((3.0 as $fty).midpoint(4.0), 3.5); - $fassert!((-3.0 as $fty).midpoint(4.0), 0.5); - $fassert!((3.0 as $fty).midpoint(-4.0), -0.5); - $fassert!((-3.0 as $fty).midpoint(-4.0), -3.5); - $fassert!((0.0 as $fty).midpoint(0.0), 0.0); - $fassert!((-0.0 as $fty).midpoint(-0.0), -0.0); - $fassert!((-5.0 as $fty).midpoint(5.0), 0.0); - $fassert!(<$fty>::MAX.midpoint(<$fty>::MIN), 0.0); - $fassert!(<$fty>::MIN.midpoint(<$fty>::MAX), -0.0); - $fassert!(<$fty>::MAX.midpoint(<$fty>::MIN_POSITIVE), <$fty>::MAX / 2.); - $fassert!((-<$fty>::MAX).midpoint(<$fty>::MIN_POSITIVE), -<$fty>::MAX / 2.); - $fassert!(<$fty>::MAX.midpoint(-<$fty>::MIN_POSITIVE), <$fty>::MAX / 2.); - $fassert!((-<$fty>::MAX).midpoint(-<$fty>::MIN_POSITIVE), -<$fty>::MAX / 2.); - $fassert!((<$fty>::MIN_POSITIVE).midpoint(<$fty>::MAX), <$fty>::MAX / 2.); - $fassert!((<$fty>::MIN_POSITIVE).midpoint(-<$fty>::MAX), -<$fty>::MAX / 2.); - $fassert!((-<$fty>::MIN_POSITIVE).midpoint(<$fty>::MAX), <$fty>::MAX / 2.); - $fassert!((-<$fty>::MIN_POSITIVE).midpoint(-<$fty>::MAX), -<$fty>::MAX / 2.); - $fassert!(<$fty>::MAX.midpoint(<$fty>::MAX), <$fty>::MAX); - $fassert!( - (<$fty>::MIN_POSITIVE).midpoint(<$fty>::MIN_POSITIVE), - <$fty>::MIN_POSITIVE - ); - $fassert!( - (-<$fty>::MIN_POSITIVE).midpoint(-<$fty>::MIN_POSITIVE), - -<$fty>::MIN_POSITIVE - ); - $fassert!(<$fty>::MAX.midpoint(5.0), <$fty>::MAX / 2.0 + 2.5); - $fassert!(<$fty>::MAX.midpoint(-5.0), <$fty>::MAX / 2.0 - 2.5); - $fassert!(<$fty>::INFINITY.midpoint(<$fty>::INFINITY), <$fty>::INFINITY); - $fassert!( - <$fty>::NEG_INFINITY.midpoint(<$fty>::NEG_INFINITY), - <$fty>::NEG_INFINITY - ); - $fassert!(<$fty>::NAN.midpoint(1.0).is_nan()); - $fassert!((1.0 as $fty).midpoint(<$fty>::NAN).is_nan()); - $fassert!(<$fty>::NAN.midpoint(<$fty>::NAN).is_nan()); - - // test if large differences in magnitude are still correctly computed. - // NOTE: that because of how small x and y are, x + y can never overflow - // so (x + y) / 2.0 is always correct - // in particular, `2.pow(i)` will never be at the max exponent, so it could - // be safely doubled, while j is significantly smaller. - for i in <$fty>::MAX_EXP.saturating_sub(64)..<$fty>::MAX_EXP { - for j in 0..64u8 { - let large = (2.0 as $fty).powi(i); - // a much smaller number, such that there is no chance of overflow to test - // potential double rounding in midpoint's implementation. - let small = (2.0 as $fty).powi(<$fty>::MAX_EXP - 1) - * <$fty>::EPSILON - * <$fty>::from(j); - - let naive = (large + small) / 2.0; - let midpoint = large.midpoint(small); - - assert_eq!(naive, midpoint); - } - } - } - #[test] - fn abs() { - $fassert!((-1.0 as $fty).abs(), 1.0); - $fassert!((1.0 as $fty).abs(), 1.0); - $fassert!(<$fty>::NEG_INFINITY.abs(), <$fty>::INFINITY); - $fassert!(<$fty>::INFINITY.abs(), <$fty>::INFINITY); - } - #[test] - fn copysign() { - $fassert!((1.0 as $fty).copysign(-2.0), -1.0); - $fassert!((-1.0 as $fty).copysign(2.0), 1.0); - $fassert!(<$fty>::INFINITY.copysign(-0.0), <$fty>::NEG_INFINITY); - $fassert!(<$fty>::NEG_INFINITY.copysign(0.0), <$fty>::INFINITY); - } - #[test] - fn rem_euclid() { - // FIXME: Use $fassert when rem_euclid becomes const - assert!(<$fty>::INFINITY.rem_euclid((42.0 as $fty)).is_nan()); - assert_eq!((42.0 as $fty).rem_euclid(<$fty>::INFINITY), (42.0 as $fty)); - assert!((42.0 as $fty).rem_euclid(<$fty>::NAN).is_nan()); - assert!(<$fty>::INFINITY.rem_euclid(<$fty>::INFINITY).is_nan()); - assert!(<$fty>::INFINITY.rem_euclid(<$fty>::NAN).is_nan()); - assert!(<$fty>::NAN.rem_euclid(<$fty>::INFINITY).is_nan()); - } - #[test] - fn div_euclid() { - // FIXME: Use $fassert when div_euclid becomes const - assert_eq!((42.0 as $fty).div_euclid(<$fty>::INFINITY), 0.0); - assert!((42.0 as $fty).div_euclid(<$fty>::NAN).is_nan()); - assert!(<$fty>::INFINITY.div_euclid(<$fty>::INFINITY).is_nan()); - assert!(<$fty>::INFINITY.div_euclid(<$fty>::NAN).is_nan()); - assert!(<$fty>::NAN.div_euclid(<$fty>::INFINITY).is_nan()); - } - #[test] - fn floor() { - $fassert!((0.0 as $fty).floor(), 0.0); - $fassert!((0.0 as $fty).floor().is_sign_positive()); - $fassert!((-0.0 as $fty).floor(), -0.0); - $fassert!((-0.0 as $fty).floor().is_sign_negative()); - $fassert!((0.5 as $fty).floor(), 0.0); - $fassert!((-0.5 as $fty).floor(), -1.0); - $fassert!((1.5 as $fty).floor(), 1.0); - $fassert!(<$fty>::MAX.floor(), <$fty>::MAX); - $fassert!(<$fty>::MIN.floor(), <$fty>::MIN); - $fassert!(<$fty>::MIN_POSITIVE.floor(), 0.0); - $fassert!((-<$fty>::MIN_POSITIVE).floor(), -1.0); - $fassert!(<$fty>::NAN.floor().is_nan()); - $fassert!(<$fty>::INFINITY.floor(), <$fty>::INFINITY); - $fassert!(<$fty>::NEG_INFINITY.floor(), <$fty>::NEG_INFINITY); - } - #[test] - fn ceil() { - $fassert!((0.0 as $fty).ceil(), 0.0); - $fassert!((0.0 as $fty).ceil().is_sign_positive()); - $fassert!((-0.0 as $fty).ceil(), 0.0); - $fassert!((-0.0 as $fty).ceil().is_sign_negative()); - $fassert!((0.5 as $fty).ceil(), 1.0); - $fassert!((-0.5 as $fty).ceil(), 0.0); - $fassert!(<$fty>::MAX.ceil(), <$fty>::MAX); - $fassert!(<$fty>::MIN.ceil(), <$fty>::MIN); - $fassert!(<$fty>::MIN_POSITIVE.ceil(), 1.0); - $fassert!((-<$fty>::MIN_POSITIVE).ceil(), 0.0); - $fassert!(<$fty>::NAN.ceil().is_nan()); - $fassert!(<$fty>::INFINITY.ceil(), <$fty>::INFINITY); - $fassert!(<$fty>::NEG_INFINITY.ceil(), <$fty>::NEG_INFINITY); - } - #[test] - fn round() { - $fassert!((0.0 as $fty).round(), 0.0); - $fassert!((0.0 as $fty).round().is_sign_positive()); - $fassert!((-0.0 as $fty).round(), -0.0); - $fassert!((-0.0 as $fty).round().is_sign_negative()); - $fassert!((0.5 as $fty).round(), 1.0); - $fassert!((-0.5 as $fty).round(), -1.0); - $fassert!(<$fty>::MAX.round(), <$fty>::MAX); - $fassert!(<$fty>::MIN.round(), <$fty>::MIN); - $fassert!(<$fty>::MIN_POSITIVE.round(), 0.0); - $fassert!((-<$fty>::MIN_POSITIVE).round(), 0.0); - $fassert!(<$fty>::NAN.round().is_nan()); - $fassert!(<$fty>::INFINITY.round(), <$fty>::INFINITY); - $fassert!(<$fty>::NEG_INFINITY.round(), <$fty>::NEG_INFINITY); - } - #[test] - fn round_ties_even() { - $fassert!((0.0 as $fty).round_ties_even(), 0.0); - $fassert!((0.0 as $fty).round_ties_even().is_sign_positive()); - $fassert!((-0.0 as $fty).round_ties_even(), -0.0); - $fassert!((-0.0 as $fty).round_ties_even().is_sign_negative()); - $fassert!((0.5 as $fty).round_ties_even(), 0.0); - $fassert!((0.5 as $fty).round_ties_even().is_sign_positive()); - $fassert!((-0.5 as $fty).round_ties_even(), -0.0); - $fassert!((-0.5 as $fty).round_ties_even().is_sign_negative()); - $fassert!(<$fty>::MAX.round_ties_even(), <$fty>::MAX); - $fassert!(<$fty>::MIN.round_ties_even(), <$fty>::MIN); - $fassert!(<$fty>::MIN_POSITIVE.round_ties_even(), 0.0); - $fassert!((-<$fty>::MIN_POSITIVE).round_ties_even(), 0.0); - $fassert!(<$fty>::NAN.round_ties_even().is_nan()); - $fassert!(<$fty>::INFINITY.round_ties_even(), <$fty>::INFINITY); - $fassert!(<$fty>::NEG_INFINITY.round_ties_even(), <$fty>::NEG_INFINITY); - } - #[test] - fn trunc() { - $fassert!((0.0 as $fty).trunc(), 0.0); - $fassert!((0.0 as $fty).trunc().is_sign_positive()); - $fassert!((-0.0 as $fty).trunc(), -0.0); - $fassert!((-0.0 as $fty).trunc().is_sign_negative()); - $fassert!((0.5 as $fty).trunc(), 0.0); - $fassert!((0.5 as $fty).trunc().is_sign_positive()); - $fassert!((-0.5 as $fty).trunc(), -0.0); - $fassert!((-0.5 as $fty).trunc().is_sign_negative()); - $fassert!(<$fty>::MAX.trunc(), <$fty>::MAX); - $fassert!(<$fty>::MIN.trunc(), <$fty>::MIN); - $fassert!(<$fty>::MIN_POSITIVE.trunc(), 0.0); - $fassert!((-<$fty>::MIN_POSITIVE).trunc(), 0.0); - $fassert!(<$fty>::NAN.trunc().is_nan()); - $fassert!(<$fty>::INFINITY.trunc(), <$fty>::INFINITY); - $fassert!(<$fty>::NEG_INFINITY.trunc(), <$fty>::NEG_INFINITY); - } - #[test] - fn fract() { - $fassert!((0.0 as $fty).fract(), 0.0); - $fassert!((0.0 as $fty).fract().is_sign_positive()); - $fassert!((-0.0 as $fty).fract(), 0.0); - $fassert!((-0.0 as $fty).fract().is_sign_positive()); - $fassert!((0.5 as $fty).fract(), 0.5); - $fassert!((0.5 as $fty).fract().is_sign_positive()); - $fassert!((-0.5 as $fty).fract(), -0.5); - $fassert!((-0.5 as $fty).fract().is_sign_negative()); - $fassert!(<$fty>::MAX.fract(), 0.0); - $fassert!(<$fty>::MIN.fract(), 0.0); - $fassert!(<$fty>::MIN_POSITIVE.fract(), <$fty>::MIN_POSITIVE); - $fassert!(<$fty>::MIN_POSITIVE.fract().is_sign_positive()); - $fassert!((-<$fty>::MIN_POSITIVE).fract(), -<$fty>::MIN_POSITIVE); - $fassert!((-<$fty>::MIN_POSITIVE).fract().is_sign_negative()); - $fassert!(<$fty>::NAN.fract().is_nan()); - $fassert!(<$fty>::INFINITY.fract().is_nan()); - $fassert!(<$fty>::NEG_INFINITY.fract().is_nan()); - } - } - }; -} - -// Custom assert macro that distribute between assert! and assert_eq! in a non-const context -macro_rules! float_assert { - ($b:expr) => { - assert!($b); - }; - ($left:expr, $right:expr) => { - assert_eq!($left, $right); - }; -} - -// Custom assert macro that only uses assert! in a const context -macro_rules! float_const_assert { - ($b:expr) => { - assert!(const { $b }); - }; - ($left:expr, $right:expr) => { - assert!(const { $left == $right }); - }; -} - -test_float!(f32, float_assert, f32); -test_float!(f32_const, float_const_assert, f32); -test_float!(f64, float_assert, f64); -test_float!(f64_const, float_const_assert, f64); diff --git a/src/bootstrap/src/core/build_steps/check.rs b/src/bootstrap/src/core/build_steps/check.rs index a3bac5bfe7a..911a51b0e16 100644 --- a/src/bootstrap/src/core/build_steps/check.rs +++ b/src/bootstrap/src/core/build_steps/check.rs @@ -77,6 +77,13 @@ impl Step for Std { } fn run(self, builder: &Builder<'_>) { + if !builder.download_rustc() && builder.config.skip_std_check_if_no_download_rustc { + eprintln!( + "WARNING: `--skip-std-check-if-no-download-rustc` flag was passed and `rust.download-rustc` is not available. Skipping." + ); + return; + } + builder.require_submodule("library/stdarch", None); let stage = self.custom_stage.unwrap_or(builder.top_stage); diff --git a/src/bootstrap/src/core/config/config.rs b/src/bootstrap/src/core/config/config.rs index 03044d4fc80..00e46875908 100644 --- a/src/bootstrap/src/core/config/config.rs +++ b/src/bootstrap/src/core/config/config.rs @@ -423,6 +423,11 @@ pub struct Config { /// Cache for determining path modifications pub path_modification_cache: Arc<Mutex<HashMap<Vec<&'static str>, PathFreshness>>>, + + /// Skip checking the standard library if `rust.download-rustc` isn't available. + /// This is mostly for RA as building the stage1 compiler to check the library tree + /// on each code change might be too much for some computers. + pub skip_std_check_if_no_download_rustc: bool, } #[derive(Debug, Default, Clone, Copy, PartialEq, Eq)] @@ -1507,6 +1512,7 @@ impl Config { config.enable_bolt_settings = flags.enable_bolt_settings; config.bypass_bootstrap_lock = flags.bypass_bootstrap_lock; config.is_running_on_ci = flags.ci.unwrap_or(CiEnv::is_ci()); + config.skip_std_check_if_no_download_rustc = flags.skip_std_check_if_no_download_rustc; // Infer the rest of the configuration. diff --git a/src/bootstrap/src/core/config/flags.rs b/src/bootstrap/src/core/config/flags.rs index 08bd87e03a1..45a0836ee67 100644 --- a/src/bootstrap/src/core/config/flags.rs +++ b/src/bootstrap/src/core/config/flags.rs @@ -182,6 +182,11 @@ pub struct Flags { /// Make bootstrap to behave as it's running on the CI environment or not. #[arg(global = true, long, value_name = "bool")] pub ci: Option<bool>, + /// Skip checking the standard library if `rust.download-rustc` isn't available. + /// This is mostly for RA as building the stage1 compiler to check the library tree + /// on each code change might be too much for some computers. + #[arg(global = true, long)] + pub skip_std_check_if_no_download_rustc: bool, } impl Flags { diff --git a/src/bootstrap/src/utils/change_tracker.rs b/src/bootstrap/src/utils/change_tracker.rs index 459a34d14cc..e939a8362ad 100644 --- a/src/bootstrap/src/utils/change_tracker.rs +++ b/src/bootstrap/src/utils/change_tracker.rs @@ -416,4 +416,9 @@ pub const CONFIG_CHANGE_HISTORY: &[ChangeInfo] = &[ severity: ChangeSeverity::Warning, summary: "Stage0 library no longer matches the in-tree library, which means stage1 compiler now uses the beta library.", }, + ChangeInfo { + change_id: 141970, + severity: ChangeSeverity::Info, + summary: "Added new bootstrap flag `--skip-std-check-if-no-download-rustc` that skips std checks when download-rustc is unavailable. Mainly intended for developers to reduce RA overhead.", + }, ]; diff --git a/src/doc/rustc-dev-guide/src/building/suggested.md b/src/doc/rustc-dev-guide/src/building/suggested.md index 76c39608449..bfb2f4d1084 100644 --- a/src/doc/rustc-dev-guide/src/building/suggested.md +++ b/src/doc/rustc-dev-guide/src/building/suggested.md @@ -59,6 +59,14 @@ always overrides the inner ones. ## Configuring `rust-analyzer` for `rustc` +### Checking the "library" tree + +Checking the "library" tree requires a stage1 compiler, which can be a heavy process on some computers. +For this reason, bootstrap has a flag called `--skip-std-check-if-no-download-rustc` that skips checking the +"library" tree if `rust.download-rustc` isn't available. If you want to avoid putting a heavy load on your computer +with `rust-analyzer`, you can add the `--skip-std-check-if-no-download-rustc` flag to your `./x check` command in +the `rust-analyzer` configuration. + ### Project-local rust-analyzer setup `rust-analyzer` can help you check and format your code whenever you save a diff --git a/src/etc/completions/x.fish b/src/etc/completions/x.fish index 4f22bc511de..10a4e684e33 100644 --- a/src/etc/completions/x.fish +++ b/src/etc/completions/x.fish @@ -1,6 +1,6 @@ # Print an optspec for argparse to handle cmd's options that are independent of any subcommand. function __fish_x_global_optspecs - string join \n v/verbose i/incremental config= build-dir= build= host= target= exclude= skip= include-default-paths rustc-error-format= on-fail= dry-run dump-bootstrap-shims stage= keep-stage= keep-stage-std= src= j/jobs= warnings= error-format= json-output color= bypass-bootstrap-lock rust-profile-generate= rust-profile-use= llvm-profile-use= llvm-profile-generate enable-bolt-settings skip-stage0-validation reproducible-artifact= set= ci= h/help + string join \n v/verbose i/incremental config= build-dir= build= host= target= exclude= skip= include-default-paths rustc-error-format= on-fail= dry-run dump-bootstrap-shims stage= keep-stage= keep-stage-std= src= j/jobs= warnings= error-format= json-output color= bypass-bootstrap-lock rust-profile-generate= rust-profile-use= llvm-profile-use= llvm-profile-generate enable-bolt-settings skip-stage0-validation reproducible-artifact= set= ci= skip-std-check-if-no-download-rustc h/help end function __fish_x_needs_command @@ -57,6 +57,7 @@ complete -c x -n "__fish_x_needs_command" -l bypass-bootstrap-lock -d 'Bootstrap complete -c x -n "__fish_x_needs_command" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_needs_command" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_needs_command" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_needs_command" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_needs_command" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_needs_command" -a "build" -d 'Compile either the compiler or libraries' complete -c x -n "__fish_x_needs_command" -a "check" -d 'Compile either the compiler or libraries, using cargo check' @@ -108,6 +109,7 @@ complete -c x -n "__fish_x_using_subcommand build" -l bypass-bootstrap-lock -d ' complete -c x -n "__fish_x_using_subcommand build" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand build" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand build" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand build" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand build" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand check" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand check" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -143,6 +145,7 @@ complete -c x -n "__fish_x_using_subcommand check" -l bypass-bootstrap-lock -d ' complete -c x -n "__fish_x_using_subcommand check" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand check" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand check" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand check" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand check" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand clippy" -s A -d 'clippy lints to allow' -r complete -c x -n "__fish_x_using_subcommand clippy" -s D -d 'clippy lints to deny' -r @@ -184,6 +187,7 @@ complete -c x -n "__fish_x_using_subcommand clippy" -l bypass-bootstrap-lock -d complete -c x -n "__fish_x_using_subcommand clippy" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand clippy" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand clippy" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand clippy" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand clippy" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand fix" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand fix" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -218,6 +222,7 @@ complete -c x -n "__fish_x_using_subcommand fix" -l bypass-bootstrap-lock -d 'Bo complete -c x -n "__fish_x_using_subcommand fix" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand fix" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand fix" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand fix" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand fix" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand fmt" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand fmt" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -254,6 +259,7 @@ complete -c x -n "__fish_x_using_subcommand fmt" -l bypass-bootstrap-lock -d 'Bo complete -c x -n "__fish_x_using_subcommand fmt" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand fmt" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand fmt" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand fmt" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand fmt" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand doc" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand doc" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -290,6 +296,7 @@ complete -c x -n "__fish_x_using_subcommand doc" -l bypass-bootstrap-lock -d 'Bo complete -c x -n "__fish_x_using_subcommand doc" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand doc" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand doc" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand doc" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand doc" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand test" -l test-args -d 'extra arguments to be passed for the test tool being used (e.g. libtest, compiletest or rustdoc)' -r complete -c x -n "__fish_x_using_subcommand test" -l compiletest-rustc-args -d 'extra options to pass the compiler when running compiletest tests' -r @@ -338,6 +345,7 @@ complete -c x -n "__fish_x_using_subcommand test" -l bypass-bootstrap-lock -d 'B complete -c x -n "__fish_x_using_subcommand test" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand test" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand test" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand test" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand test" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand miri" -l test-args -d 'extra arguments to be passed for the test tool being used (e.g. libtest, compiletest or rustdoc)' -r complete -c x -n "__fish_x_using_subcommand miri" -l config -d 'TOML configuration file for build' -r -F @@ -376,6 +384,7 @@ complete -c x -n "__fish_x_using_subcommand miri" -l bypass-bootstrap-lock -d 'B complete -c x -n "__fish_x_using_subcommand miri" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand miri" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand miri" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand miri" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand miri" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand bench" -l test-args -r complete -c x -n "__fish_x_using_subcommand bench" -l config -d 'TOML configuration file for build' -r -F @@ -411,6 +420,7 @@ complete -c x -n "__fish_x_using_subcommand bench" -l bypass-bootstrap-lock -d ' complete -c x -n "__fish_x_using_subcommand bench" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand bench" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand bench" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand bench" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand bench" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand clean" -l stage -d 'Clean a specific stage without touching other artifacts. By default, every stage is cleaned if this option is not used' -r complete -c x -n "__fish_x_using_subcommand clean" -l config -d 'TOML configuration file for build' -r -F @@ -446,6 +456,7 @@ complete -c x -n "__fish_x_using_subcommand clean" -l bypass-bootstrap-lock -d ' complete -c x -n "__fish_x_using_subcommand clean" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand clean" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand clean" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand clean" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand clean" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand dist" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand dist" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -480,6 +491,7 @@ complete -c x -n "__fish_x_using_subcommand dist" -l bypass-bootstrap-lock -d 'B complete -c x -n "__fish_x_using_subcommand dist" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand dist" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand dist" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand dist" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand dist" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand install" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand install" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -514,6 +526,7 @@ complete -c x -n "__fish_x_using_subcommand install" -l bypass-bootstrap-lock -d complete -c x -n "__fish_x_using_subcommand install" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand install" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand install" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand install" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand install" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand run" -l args -d 'arguments for the tool' -r complete -c x -n "__fish_x_using_subcommand run" -l config -d 'TOML configuration file for build' -r -F @@ -549,6 +562,7 @@ complete -c x -n "__fish_x_using_subcommand run" -l bypass-bootstrap-lock -d 'Bo complete -c x -n "__fish_x_using_subcommand run" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand run" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand run" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand run" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand run" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand setup" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand setup" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -583,6 +597,7 @@ complete -c x -n "__fish_x_using_subcommand setup" -l bypass-bootstrap-lock -d ' complete -c x -n "__fish_x_using_subcommand setup" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand setup" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand setup" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand setup" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand setup" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand suggest" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand suggest" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -618,6 +633,7 @@ complete -c x -n "__fish_x_using_subcommand suggest" -l bypass-bootstrap-lock -d complete -c x -n "__fish_x_using_subcommand suggest" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand suggest" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand suggest" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand suggest" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand suggest" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand vendor" -l sync -d 'Additional `Cargo.toml` to sync and vendor' -r -F complete -c x -n "__fish_x_using_subcommand vendor" -l config -d 'TOML configuration file for build' -r -F @@ -654,6 +670,7 @@ complete -c x -n "__fish_x_using_subcommand vendor" -l bypass-bootstrap-lock -d complete -c x -n "__fish_x_using_subcommand vendor" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand vendor" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand vendor" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand vendor" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand vendor" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -688,6 +705,7 @@ complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -a "eprintln" -d 'Run `profile_local eprintln`. This executes the compiler on the given benchmarks and stores its stderr output' complete -c x -n "__fish_x_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -a "samply" -d 'Run `profile_local samply` This executes the compiler on the given benchmarks and profiles it with `samply`. You need to install `samply`, e.g. using `cargo install samply`' @@ -730,6 +748,7 @@ complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_fro complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from samply" -l include -d 'Select the benchmarks that you want to run (separated by commas). If unspecified, all benchmarks will be executed' -r complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from samply" -l exclude -d 'Select the benchmarks matching a prefix in this comma-separated list that you don\'t want to run' -r @@ -767,6 +786,7 @@ complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_fro complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from samply" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from samply" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from samply" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from samply" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from samply" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l include -d 'Select the benchmarks that you want to run (separated by commas). If unspecified, all benchmarks will be executed' -r complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l exclude -d 'Select the benchmarks matching a prefix in this comma-separated list that you don\'t want to run' -r @@ -804,6 +824,7 @@ complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_fro complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l include -d 'Select the benchmarks that you want to run (separated by commas). If unspecified, all benchmarks will be executed' -r complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l exclude -d 'Select the benchmarks matching a prefix in this comma-separated list that you don\'t want to run' -r @@ -841,6 +862,7 @@ complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_fro complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from compare" -l config -d 'TOML configuration file for build' -r -F complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from compare" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -875,4 +897,5 @@ complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_fro complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from compare" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from compare" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from compare" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from compare" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x -n "__fish_x_using_subcommand perf; and __fish_seen_subcommand_from compare" -s h -l help -d 'Print help (see more with \'--help\')' diff --git a/src/etc/completions/x.ps1 b/src/etc/completions/x.ps1 index 638b87edfb2..23d8fe0cdd3 100644 --- a/src/etc/completions/x.ps1 +++ b/src/etc/completions/x.ps1 @@ -57,6 +57,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('build', 'build', [CompletionResultType]::ParameterValue, 'Compile either the compiler or libraries') @@ -115,6 +116,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -157,6 +159,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -205,6 +208,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -246,6 +250,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -289,6 +294,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -332,6 +338,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -387,6 +394,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -432,6 +440,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -474,6 +483,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -516,6 +526,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -557,6 +568,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -598,6 +610,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -640,6 +653,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -681,6 +695,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -723,6 +738,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -766,6 +782,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -807,6 +824,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('eprintln', 'eprintln', [CompletionResultType]::ParameterValue, 'Run `profile_local eprintln`. This executes the compiler on the given benchmarks and stores its stderr output') @@ -856,6 +874,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -900,6 +919,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -944,6 +964,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -988,6 +1009,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -1029,6 +1051,7 @@ Register-ArgumentCompleter -Native -CommandName 'x' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break diff --git a/src/etc/completions/x.py.fish b/src/etc/completions/x.py.fish index 75771ec9a81..1fc5bb12cfb 100644 --- a/src/etc/completions/x.py.fish +++ b/src/etc/completions/x.py.fish @@ -1,6 +1,6 @@ # Print an optspec for argparse to handle cmd's options that are independent of any subcommand. function __fish_x.py_global_optspecs - string join \n v/verbose i/incremental config= build-dir= build= host= target= exclude= skip= include-default-paths rustc-error-format= on-fail= dry-run dump-bootstrap-shims stage= keep-stage= keep-stage-std= src= j/jobs= warnings= error-format= json-output color= bypass-bootstrap-lock rust-profile-generate= rust-profile-use= llvm-profile-use= llvm-profile-generate enable-bolt-settings skip-stage0-validation reproducible-artifact= set= ci= h/help + string join \n v/verbose i/incremental config= build-dir= build= host= target= exclude= skip= include-default-paths rustc-error-format= on-fail= dry-run dump-bootstrap-shims stage= keep-stage= keep-stage-std= src= j/jobs= warnings= error-format= json-output color= bypass-bootstrap-lock rust-profile-generate= rust-profile-use= llvm-profile-use= llvm-profile-generate enable-bolt-settings skip-stage0-validation reproducible-artifact= set= ci= skip-std-check-if-no-download-rustc h/help end function __fish_x.py_needs_command @@ -57,6 +57,7 @@ complete -c x.py -n "__fish_x.py_needs_command" -l bypass-bootstrap-lock -d 'Boo complete -c x.py -n "__fish_x.py_needs_command" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_needs_command" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_needs_command" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_needs_command" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_needs_command" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_needs_command" -a "build" -d 'Compile either the compiler or libraries' complete -c x.py -n "__fish_x.py_needs_command" -a "check" -d 'Compile either the compiler or libraries, using cargo check' @@ -108,6 +109,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand build" -l bypass-bootstrap-loc complete -c x.py -n "__fish_x.py_using_subcommand build" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand build" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand build" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand build" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand build" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand check" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand check" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -143,6 +145,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand check" -l bypass-bootstrap-loc complete -c x.py -n "__fish_x.py_using_subcommand check" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand check" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand check" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand check" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand check" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand clippy" -s A -d 'clippy lints to allow' -r complete -c x.py -n "__fish_x.py_using_subcommand clippy" -s D -d 'clippy lints to deny' -r @@ -184,6 +187,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand clippy" -l bypass-bootstrap-lo complete -c x.py -n "__fish_x.py_using_subcommand clippy" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand clippy" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand clippy" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand clippy" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand clippy" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand fix" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand fix" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -218,6 +222,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand fix" -l bypass-bootstrap-lock complete -c x.py -n "__fish_x.py_using_subcommand fix" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand fix" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand fix" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand fix" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand fix" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand fmt" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand fmt" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -254,6 +259,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand fmt" -l bypass-bootstrap-lock complete -c x.py -n "__fish_x.py_using_subcommand fmt" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand fmt" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand fmt" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand fmt" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand fmt" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand doc" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand doc" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -290,6 +296,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand doc" -l bypass-bootstrap-lock complete -c x.py -n "__fish_x.py_using_subcommand doc" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand doc" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand doc" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand doc" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand doc" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand test" -l test-args -d 'extra arguments to be passed for the test tool being used (e.g. libtest, compiletest or rustdoc)' -r complete -c x.py -n "__fish_x.py_using_subcommand test" -l compiletest-rustc-args -d 'extra options to pass the compiler when running compiletest tests' -r @@ -338,6 +345,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand test" -l bypass-bootstrap-lock complete -c x.py -n "__fish_x.py_using_subcommand test" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand test" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand test" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand test" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand test" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand miri" -l test-args -d 'extra arguments to be passed for the test tool being used (e.g. libtest, compiletest or rustdoc)' -r complete -c x.py -n "__fish_x.py_using_subcommand miri" -l config -d 'TOML configuration file for build' -r -F @@ -376,6 +384,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand miri" -l bypass-bootstrap-lock complete -c x.py -n "__fish_x.py_using_subcommand miri" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand miri" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand miri" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand miri" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand miri" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand bench" -l test-args -r complete -c x.py -n "__fish_x.py_using_subcommand bench" -l config -d 'TOML configuration file for build' -r -F @@ -411,6 +420,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand bench" -l bypass-bootstrap-loc complete -c x.py -n "__fish_x.py_using_subcommand bench" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand bench" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand bench" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand bench" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand bench" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand clean" -l stage -d 'Clean a specific stage without touching other artifacts. By default, every stage is cleaned if this option is not used' -r complete -c x.py -n "__fish_x.py_using_subcommand clean" -l config -d 'TOML configuration file for build' -r -F @@ -446,6 +456,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand clean" -l bypass-bootstrap-loc complete -c x.py -n "__fish_x.py_using_subcommand clean" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand clean" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand clean" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand clean" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand clean" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand dist" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand dist" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -480,6 +491,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand dist" -l bypass-bootstrap-lock complete -c x.py -n "__fish_x.py_using_subcommand dist" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand dist" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand dist" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand dist" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand dist" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand install" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand install" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -514,6 +526,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand install" -l bypass-bootstrap-l complete -c x.py -n "__fish_x.py_using_subcommand install" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand install" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand install" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand install" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand install" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand run" -l args -d 'arguments for the tool' -r complete -c x.py -n "__fish_x.py_using_subcommand run" -l config -d 'TOML configuration file for build' -r -F @@ -549,6 +562,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand run" -l bypass-bootstrap-lock complete -c x.py -n "__fish_x.py_using_subcommand run" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand run" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand run" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand run" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand run" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand setup" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand setup" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -583,6 +597,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand setup" -l bypass-bootstrap-loc complete -c x.py -n "__fish_x.py_using_subcommand setup" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand setup" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand setup" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand setup" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand setup" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand suggest" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand suggest" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -618,6 +633,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand suggest" -l bypass-bootstrap-l complete -c x.py -n "__fish_x.py_using_subcommand suggest" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand suggest" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand suggest" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand suggest" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand suggest" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand vendor" -l sync -d 'Additional `Cargo.toml` to sync and vendor' -r -F complete -c x.py -n "__fish_x.py_using_subcommand vendor" -l config -d 'TOML configuration file for build' -r -F @@ -654,6 +670,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand vendor" -l bypass-bootstrap-lo complete -c x.py -n "__fish_x.py_using_subcommand vendor" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand vendor" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand vendor" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand vendor" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand vendor" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -688,6 +705,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subc complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -a "eprintln" -d 'Run `profile_local eprintln`. This executes the compiler on the given benchmarks and stores its stderr output' complete -c x.py -n "__fish_x.py_using_subcommand perf; and not __fish_seen_subcommand_from eprintln samply cachegrind benchmark compare" -a "samply" -d 'Run `profile_local samply` This executes the compiler on the given benchmarks and profiles it with `samply`. You need to install `samply`, e.g. using `cargo install samply`' @@ -730,6 +748,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcomma complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from eprintln" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from samply" -l include -d 'Select the benchmarks that you want to run (separated by commas). If unspecified, all benchmarks will be executed' -r complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from samply" -l exclude -d 'Select the benchmarks matching a prefix in this comma-separated list that you don\'t want to run' -r @@ -767,6 +786,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcomma complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from samply" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from samply" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from samply" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from samply" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from samply" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l include -d 'Select the benchmarks that you want to run (separated by commas). If unspecified, all benchmarks will be executed' -r complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l exclude -d 'Select the benchmarks matching a prefix in this comma-separated list that you don\'t want to run' -r @@ -804,6 +824,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcomma complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from cachegrind" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l include -d 'Select the benchmarks that you want to run (separated by commas). If unspecified, all benchmarks will be executed' -r complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l exclude -d 'Select the benchmarks matching a prefix in this comma-separated list that you don\'t want to run' -r @@ -841,6 +862,7 @@ complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcomma complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from benchmark" -s h -l help -d 'Print help (see more with \'--help\')' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from compare" -l config -d 'TOML configuration file for build' -r -F complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from compare" -l build-dir -d 'Build directory, overrides `build.build-dir` in `bootstrap.toml`' -r -f -a "(__fish_complete_directories)" @@ -875,4 +897,5 @@ complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcomma complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from compare" -l llvm-profile-generate -d 'generate PGO profile with llvm built for rustc' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from compare" -l enable-bolt-settings -d 'Enable BOLT link flags' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from compare" -l skip-stage0-validation -d 'Skip stage0 compiler validation' +complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from compare" -l skip-std-check-if-no-download-rustc -d 'Skip checking the standard library if `rust.download-rustc` isn\'t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers' complete -c x.py -n "__fish_x.py_using_subcommand perf; and __fish_seen_subcommand_from compare" -s h -l help -d 'Print help (see more with \'--help\')' diff --git a/src/etc/completions/x.py.ps1 b/src/etc/completions/x.py.ps1 index 0a716619106..5d224ac6df4 100644 --- a/src/etc/completions/x.py.ps1 +++ b/src/etc/completions/x.py.ps1 @@ -57,6 +57,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('build', 'build', [CompletionResultType]::ParameterValue, 'Compile either the compiler or libraries') @@ -115,6 +116,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -157,6 +159,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -205,6 +208,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -246,6 +250,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -289,6 +294,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -332,6 +338,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -387,6 +394,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -432,6 +440,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -474,6 +483,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -516,6 +526,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -557,6 +568,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -598,6 +610,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -640,6 +653,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -681,6 +695,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -723,6 +738,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -766,6 +782,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -807,6 +824,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('eprintln', 'eprintln', [CompletionResultType]::ParameterValue, 'Run `profile_local eprintln`. This executes the compiler on the given benchmarks and stores its stderr output') @@ -856,6 +874,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -900,6 +919,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -944,6 +964,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -988,6 +1009,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break @@ -1029,6 +1051,7 @@ Register-ArgumentCompleter -Native -CommandName 'x.py' -ScriptBlock { [CompletionResult]::new('--llvm-profile-generate', '--llvm-profile-generate', [CompletionResultType]::ParameterName, 'generate PGO profile with llvm built for rustc') [CompletionResult]::new('--enable-bolt-settings', '--enable-bolt-settings', [CompletionResultType]::ParameterName, 'Enable BOLT link flags') [CompletionResult]::new('--skip-stage0-validation', '--skip-stage0-validation', [CompletionResultType]::ParameterName, 'Skip stage0 compiler validation') + [CompletionResult]::new('--skip-std-check-if-no-download-rustc', '--skip-std-check-if-no-download-rustc', [CompletionResultType]::ParameterName, 'Skip checking the standard library if `rust.download-rustc` isn''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers') [CompletionResult]::new('-h', '-h', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') [CompletionResult]::new('--help', '--help', [CompletionResultType]::ParameterName, 'Print help (see more with ''--help'')') break diff --git a/src/etc/completions/x.py.sh b/src/etc/completions/x.py.sh index 79b239c672d..568bf2fcc6d 100644 --- a/src/etc/completions/x.py.sh +++ b/src/etc/completions/x.py.sh @@ -85,7 +85,7 @@ _x.py() { case "${cmd}" in x.py) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]... build check clippy fix fmt doc test miri bench clean dist install run setup suggest vendor perf" + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]... build check clippy fix fmt doc test miri bench clean dist install run setup suggest vendor perf" if [[ ${cur} == -* || ${COMP_CWORD} -eq 1 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -278,7 +278,7 @@ _x.py() { return 0 ;; x.py__bench) - opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -475,7 +475,7 @@ _x.py() { return 0 ;; x.py__build) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -668,7 +668,7 @@ _x.py() { return 0 ;; x.py__check) - opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -861,7 +861,7 @@ _x.py() { return 0 ;; x.py__clean) - opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1051,7 +1051,7 @@ _x.py() { return 0 ;; x.py__clippy) - opts="-A -D -W -F -v -i -j -h --fix --allow-dirty --allow-staged --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-A -D -W -F -v -i -j -h --fix --allow-dirty --allow-staged --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1260,7 +1260,7 @@ _x.py() { return 0 ;; x.py__dist) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1453,7 +1453,7 @@ _x.py() { return 0 ;; x.py__doc) - opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1646,7 +1646,7 @@ _x.py() { return 0 ;; x.py__fix) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1839,7 +1839,7 @@ _x.py() { return 0 ;; x.py__fmt) - opts="-v -i -j -h --check --all --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --check --all --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2032,7 +2032,7 @@ _x.py() { return 0 ;; x.py__install) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2225,7 +2225,7 @@ _x.py() { return 0 ;; x.py__miri) - opts="-v -i -j -h --no-fail-fast --test-args --no-doc --doc --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --no-fail-fast --test-args --no-doc --doc --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2422,7 +2422,7 @@ _x.py() { return 0 ;; x.py__perf) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]... eprintln samply cachegrind benchmark compare" + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]... eprintln samply cachegrind benchmark compare" if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2615,7 +2615,7 @@ _x.py() { return 0 ;; x.py__perf__benchmark) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help <benchmark-id> [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help <benchmark-id> [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2820,7 +2820,7 @@ _x.py() { return 0 ;; x.py__perf__cachegrind) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3025,7 +3025,7 @@ _x.py() { return 0 ;; x.py__perf__compare) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help <BASE> <MODIFIED> [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help <BASE> <MODIFIED> [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3218,7 +3218,7 @@ _x.py() { return 0 ;; x.py__perf__eprintln) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3423,7 +3423,7 @@ _x.py() { return 0 ;; x.py__perf__samply) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3628,7 +3628,7 @@ _x.py() { return 0 ;; x.py__run) - opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3825,7 +3825,7 @@ _x.py() { return 0 ;; x.py__setup) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [<PROFILE>|hook|editor|link] [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [<PROFILE>|hook|editor|link] [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -4018,7 +4018,7 @@ _x.py() { return 0 ;; x.py__suggest) - opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -4211,7 +4211,7 @@ _x.py() { return 0 ;; x.py__test) - opts="-v -i -j -h --no-fail-fast --test-args --compiletest-rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --no-capture --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --no-fail-fast --test-args --compiletest-rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --no-capture --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -4428,7 +4428,7 @@ _x.py() { return 0 ;; x.py__vendor) - opts="-v -i -j -h --sync --versioned-dirs --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --sync --versioned-dirs --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 diff --git a/src/etc/completions/x.py.zsh b/src/etc/completions/x.py.zsh index fccea8484d7..bc55280d038 100644 --- a/src/etc/completions/x.py.zsh +++ b/src/etc/completions/x.py.zsh @@ -51,6 +51,7 @@ _x.py() { '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '::paths -- paths for the subcommand:_files' \ @@ -102,6 +103,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -146,6 +148,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -196,6 +199,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -239,6 +243,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -284,6 +289,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -329,6 +335,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -386,6 +393,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -433,6 +441,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -477,6 +486,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -521,6 +531,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -564,6 +575,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -607,6 +619,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -651,6 +664,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -694,6 +708,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '::profile -- Either the profile for `bootstrap.toml` or another setup action. May be omitted to set up interactively:_files' \ @@ -739,6 +754,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -784,6 +800,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -827,6 +844,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '::paths -- paths for the subcommand:_files' \ @@ -882,6 +900,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -928,6 +947,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -974,6 +994,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -1020,6 +1041,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ ':benchmark-id -- Identifier to associate benchmark results with:_default' \ @@ -1064,6 +1086,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ ':base -- The name of the base artifact to be compared:_default' \ diff --git a/src/etc/completions/x.sh b/src/etc/completions/x.sh index 2dd322bcfc1..d48c29e6298 100644 --- a/src/etc/completions/x.sh +++ b/src/etc/completions/x.sh @@ -85,7 +85,7 @@ _x() { case "${cmd}" in x) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]... build check clippy fix fmt doc test miri bench clean dist install run setup suggest vendor perf" + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]... build check clippy fix fmt doc test miri bench clean dist install run setup suggest vendor perf" if [[ ${cur} == -* || ${COMP_CWORD} -eq 1 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -278,7 +278,7 @@ _x() { return 0 ;; x__bench) - opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --test-args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -475,7 +475,7 @@ _x() { return 0 ;; x__build) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -668,7 +668,7 @@ _x() { return 0 ;; x__check) - opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --all-targets --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -861,7 +861,7 @@ _x() { return 0 ;; x__clean) - opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --all --stage --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1051,7 +1051,7 @@ _x() { return 0 ;; x__clippy) - opts="-A -D -W -F -v -i -j -h --fix --allow-dirty --allow-staged --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-A -D -W -F -v -i -j -h --fix --allow-dirty --allow-staged --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1260,7 +1260,7 @@ _x() { return 0 ;; x__dist) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1453,7 +1453,7 @@ _x() { return 0 ;; x__doc) - opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --open --json --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1646,7 +1646,7 @@ _x() { return 0 ;; x__fix) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -1839,7 +1839,7 @@ _x() { return 0 ;; x__fmt) - opts="-v -i -j -h --check --all --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --check --all --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2032,7 +2032,7 @@ _x() { return 0 ;; x__install) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2225,7 +2225,7 @@ _x() { return 0 ;; x__miri) - opts="-v -i -j -h --no-fail-fast --test-args --no-doc --doc --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --no-fail-fast --test-args --no-doc --doc --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2422,7 +2422,7 @@ _x() { return 0 ;; x__perf) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]... eprintln samply cachegrind benchmark compare" + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]... eprintln samply cachegrind benchmark compare" if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2615,7 +2615,7 @@ _x() { return 0 ;; x__perf__benchmark) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help <benchmark-id> [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help <benchmark-id> [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -2820,7 +2820,7 @@ _x() { return 0 ;; x__perf__cachegrind) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3025,7 +3025,7 @@ _x() { return 0 ;; x__perf__compare) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help <BASE> <MODIFIED> [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help <BASE> <MODIFIED> [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3218,7 +3218,7 @@ _x() { return 0 ;; x__perf__eprintln) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3423,7 +3423,7 @@ _x() { return 0 ;; x__perf__samply) - opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --include --exclude --scenarios --profiles --verbose --incremental --config --build-dir --build --host --target --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 3 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3628,7 +3628,7 @@ _x() { return 0 ;; x__run) - opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --args --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -3825,7 +3825,7 @@ _x() { return 0 ;; x__setup) - opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [<PROFILE>|hook|editor|link] [PATHS]... [ARGS]..." + opts="-v -i -j -h --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [<PROFILE>|hook|editor|link] [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -4018,7 +4018,7 @@ _x() { return 0 ;; x__suggest) - opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --run --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -4211,7 +4211,7 @@ _x() { return 0 ;; x__test) - opts="-v -i -j -h --no-fail-fast --test-args --compiletest-rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --no-capture --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --no-fail-fast --test-args --compiletest-rustc-args --no-doc --doc --bless --extra-checks --force-rerun --only-modified --compare-mode --pass --run --rustfix-coverage --no-capture --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 @@ -4428,7 +4428,7 @@ _x() { return 0 ;; x__vendor) - opts="-v -i -j -h --sync --versioned-dirs --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --help [PATHS]... [ARGS]..." + opts="-v -i -j -h --sync --versioned-dirs --verbose --incremental --config --build-dir --build --host --target --exclude --skip --include-default-paths --rustc-error-format --on-fail --dry-run --dump-bootstrap-shims --stage --keep-stage --keep-stage-std --src --jobs --warnings --error-format --json-output --color --bypass-bootstrap-lock --rust-profile-generate --rust-profile-use --llvm-profile-use --llvm-profile-generate --enable-bolt-settings --skip-stage0-validation --reproducible-artifact --set --ci --skip-std-check-if-no-download-rustc --help [PATHS]... [ARGS]..." if [[ ${cur} == -* || ${COMP_CWORD} -eq 2 ]] ; then COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") ) return 0 diff --git a/src/etc/completions/x.zsh b/src/etc/completions/x.zsh index 32b297b6cd5..2e3094fc379 100644 --- a/src/etc/completions/x.zsh +++ b/src/etc/completions/x.zsh @@ -51,6 +51,7 @@ _x() { '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '::paths -- paths for the subcommand:_files' \ @@ -102,6 +103,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -146,6 +148,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -196,6 +199,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -239,6 +243,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -284,6 +289,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -329,6 +335,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -386,6 +393,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -433,6 +441,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -477,6 +486,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -521,6 +531,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -564,6 +575,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -607,6 +619,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -651,6 +664,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -694,6 +708,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '::profile -- Either the profile for `bootstrap.toml` or another setup action. May be omitted to set up interactively:_files' \ @@ -739,6 +754,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -784,6 +800,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -827,6 +844,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '::paths -- paths for the subcommand:_files' \ @@ -882,6 +900,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -928,6 +947,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -974,6 +994,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ '*::paths -- paths for the subcommand:_files' \ @@ -1020,6 +1041,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ ':benchmark-id -- Identifier to associate benchmark results with:_default' \ @@ -1064,6 +1086,7 @@ _arguments "${_arguments_options[@]}" : \ '--llvm-profile-generate[generate PGO profile with llvm built for rustc]' \ '--enable-bolt-settings[Enable BOLT link flags]' \ '--skip-stage0-validation[Skip stage0 compiler validation]' \ +'--skip-std-check-if-no-download-rustc[Skip checking the standard library if \`rust.download-rustc\` isn'\''t available. This is mostly for RA as building the stage1 compiler to check the library tree on each code change might be too much for some computers]' \ '-h[Print help (see more with '\''--help'\'')]' \ '--help[Print help (see more with '\''--help'\'')]' \ ':base -- The name of the base artifact to be compared:_default' \ diff --git a/src/tools/miri/README.md b/src/tools/miri/README.md index de521393cd0..126a8dc4736 100644 --- a/src/tools/miri/README.md +++ b/src/tools/miri/README.md @@ -398,9 +398,11 @@ to Miri failing to detect cases of undefined behavior in a program. **unsound** since the fallback body might not be checking for all UB. * `-Zmiri-native-lib=<path to a shared object file>` is an experimental flag for providing support for calling native functions from inside the interpreter via FFI. The flag is supported only on - Unix systems. Functions not provided by that file are still executed via the usual Miri shims. + Unix systems. Functions not provided by that file are still executed via the usual Miri shims. If + a path to a directory is specified, all files in that directory are included nonrecursively. This + flag can be passed multiple times to specify multiple files and/or directories. **WARNING**: If an invalid/incorrect `.so` file is specified, this can cause Undefined Behavior in - Miri itself! And of course, Miri cannot do any checks on the actions taken by the native code. + Miri itself! And of course, Miri often cannot do any checks on the actions taken by the native code. Note that Miri has its own handling of file descriptors, so if you want to replace *some* functions working on file descriptors, you will have to replace *all* of them, or the two kinds of file descriptors will be mixed up. This is **work in progress**; currently, only integer and diff --git a/src/tools/miri/rust-version b/src/tools/miri/rust-version index 553d410b2bc..437d4218cfa 100644 --- a/src/tools/miri/rust-version +++ b/src/tools/miri/rust-version @@ -1 +1 @@ -337c11e5932275e7d450c1f2e26f289f0ddfa717 +81a964c23ea4fe9ab52b4449bb166bf280035797 diff --git a/src/tools/miri/src/alloc_addresses/mod.rs b/src/tools/miri/src/alloc_addresses/mod.rs index 12a320b9676..4a038fe6487 100644 --- a/src/tools/miri/src/alloc_addresses/mod.rs +++ b/src/tools/miri/src/alloc_addresses/mod.rs @@ -132,7 +132,7 @@ trait EvalContextExtPriv<'tcx>: crate::MiriInterpCxExt<'tcx> { assert!(!matches!(info.kind, AllocKind::Dead)); // This allocation does not have a base address yet, pick or reuse one. - if this.machine.native_lib.is_some() { + if !this.machine.native_lib.is_empty() { // In native lib mode, we use the "real" address of the bytes for this allocation. // This ensures the interpreted program and native code have the same view of memory. let params = this.machine.get_default_alloc_params(); @@ -413,7 +413,7 @@ pub trait EvalContextExt<'tcx>: crate::MiriInterpCxExt<'tcx> { ) -> InterpResult<'tcx, MiriAllocBytes> { let this = self.eval_context_ref(); assert!(this.tcx.try_get_global_alloc(id).is_some()); - if this.machine.native_lib.is_some() { + if !this.machine.native_lib.is_empty() { // In native lib mode, MiriAllocBytes for global allocations are handled via `prepared_alloc_bytes`. // This additional call ensures that some `MiriAllocBytes` are always prepared, just in case // this function gets called before the first time `addr_from_alloc_id` gets called. diff --git a/src/tools/miri/src/bin/miri.rs b/src/tools/miri/src/bin/miri.rs index 0121472d330..f8168853d3a 100644 --- a/src/tools/miri/src/bin/miri.rs +++ b/src/tools/miri/src/bin/miri.rs @@ -692,11 +692,18 @@ fn main() { }; } else if let Some(param) = arg.strip_prefix("-Zmiri-native-lib=") { let filename = param.to_string(); - if std::path::Path::new(&filename).exists() { - if let Some(other_filename) = miri_config.native_lib { - show_error!("-Zmiri-native-lib is already set to {}", other_filename.display()); + let file_path = std::path::Path::new(&filename); + if file_path.exists() { + // For directories, nonrecursively add all normal files inside + if let Ok(dir) = file_path.read_dir() { + for lib in dir.filter_map(|res| res.ok()) { + if lib.file_type().unwrap().is_file() { + miri_config.native_lib.push(lib.path().to_owned()); + } + } + } else { + miri_config.native_lib.push(filename.into()); } - miri_config.native_lib = Some(filename.into()); } else { show_error!("-Zmiri-native-lib `{}` does not exist", filename); } @@ -731,12 +738,12 @@ fn main() { "Tree Borrows does not support integer-to-pointer casts, and hence requires strict provenance" ); } - if miri_config.native_lib.is_some() { + if !miri_config.native_lib.is_empty() { show_error!("Tree Borrows is not compatible with calling native functions"); } } // Native calls and strict provenance are not compatible. - if miri_config.native_lib.is_some() && miri_config.provenance_mode == ProvenanceMode::Strict { + if !miri_config.native_lib.is_empty() && miri_config.provenance_mode == ProvenanceMode::Strict { show_error!("strict provenance is not compatible with calling native functions"); } // You can set either one seed or many. diff --git a/src/tools/miri/src/eval.rs b/src/tools/miri/src/eval.rs index 8fe034d2582..1477f103ca5 100644 --- a/src/tools/miri/src/eval.rs +++ b/src/tools/miri/src/eval.rs @@ -148,9 +148,8 @@ pub struct MiriConfig { pub report_progress: Option<u32>, /// Whether Stacked Borrows and Tree Borrows retagging should recurse into fields of datatypes. pub retag_fields: RetagFields, - /// The location of a shared object file to load when calling external functions - /// FIXME! consider allowing users to specify paths to multiple files, or to a directory - pub native_lib: Option<PathBuf>, + /// The location of the shared object files to load when calling external functions + pub native_lib: Vec<PathBuf>, /// Run a garbage collector for BorTags every N basic blocks. pub gc_interval: u32, /// The number of CPUs to be reported by miri. @@ -197,7 +196,7 @@ impl Default for MiriConfig { preemption_rate: 0.01, // 1% report_progress: None, retag_fields: RetagFields::Yes, - native_lib: None, + native_lib: vec![], gc_interval: 10_000, num_cpus: 1, page_size: None, diff --git a/src/tools/miri/src/machine.rs b/src/tools/miri/src/machine.rs index 15b3653d7ae..b221dd85092 100644 --- a/src/tools/miri/src/machine.rs +++ b/src/tools/miri/src/machine.rs @@ -558,9 +558,9 @@ pub struct MiriMachine<'tcx> { /// Handle of the optional shared object file for native functions. #[cfg(unix)] - pub native_lib: Option<(libloading::Library, std::path::PathBuf)>, + pub native_lib: Vec<(libloading::Library, std::path::PathBuf)>, #[cfg(not(unix))] - pub native_lib: Option<!>, + pub native_lib: Vec<!>, /// Run a garbage collector for BorTags every N basic blocks. pub(crate) gc_interval: u32, @@ -720,7 +720,7 @@ impl<'tcx> MiriMachine<'tcx> { extern_statics: FxHashMap::default(), rng: RefCell::new(rng), #[cfg(target_os = "linux")] - allocator: if config.native_lib.is_some() { + allocator: if !config.native_lib.is_empty() { Some(Rc::new(RefCell::new(crate::alloc::isolated_alloc::IsolatedAlloc::new()))) } else { None }, tracked_alloc_ids: config.tracked_alloc_ids.clone(), @@ -732,7 +732,7 @@ impl<'tcx> MiriMachine<'tcx> { basic_block_count: 0, monotonic_clock: MonotonicClock::new(config.isolated_op == IsolatedOp::Allow), #[cfg(unix)] - native_lib: config.native_lib.as_ref().map(|lib_file_path| { + native_lib: config.native_lib.iter().map(|lib_file_path| { let host_triple = rustc_session::config::host_tuple(); let target_triple = tcx.sess.opts.target_triple.tuple(); // Check if host target == the session target. @@ -752,11 +752,11 @@ impl<'tcx> MiriMachine<'tcx> { }, lib_file_path.clone(), ) - }), + }).collect(), #[cfg(not(unix))] - native_lib: config.native_lib.as_ref().map(|_| { + native_lib: config.native_lib.iter().map(|_| { panic!("calling functions from native libraries via FFI is only supported on Unix") - }), + }).collect(), gc_interval: config.gc_interval, since_gc: 0, num_cpus: config.num_cpus, diff --git a/src/tools/miri/src/shims/foreign_items.rs b/src/tools/miri/src/shims/foreign_items.rs index ae04ca018ab..39b930fdeb9 100644 --- a/src/tools/miri/src/shims/foreign_items.rs +++ b/src/tools/miri/src/shims/foreign_items.rs @@ -238,7 +238,7 @@ trait EvalContextExtPriv<'tcx>: crate::MiriInterpCxExt<'tcx> { // First deal with any external C functions in linked .so file. #[cfg(unix)] - if this.machine.native_lib.as_ref().is_some() { + if !this.machine.native_lib.is_empty() { use crate::shims::native_lib::EvalContextExt as _; // An Ok(false) here means that the function being called was not exported // by the specified `.so` file; we should continue and check if it corresponds to diff --git a/src/tools/miri/src/shims/native_lib.rs b/src/tools/miri/src/shims/native_lib.rs index 1e6c93333c1..40440bf6da4 100644 --- a/src/tools/miri/src/shims/native_lib.rs +++ b/src/tools/miri/src/shims/native_lib.rs @@ -87,47 +87,52 @@ trait EvalContextExtPriv<'tcx>: crate::MiriInterpCxExt<'tcx> { } /// Get the pointer to the function of the specified name in the shared object file, - /// if it exists. The function must be in the shared object file specified: we do *not* - /// return pointers to functions in dependencies of the library. + /// if it exists. The function must be in one of the shared object files specified: + /// we do *not* return pointers to functions in dependencies of libraries. fn get_func_ptr_explicitly_from_lib(&mut self, link_name: Symbol) -> Option<CodePtr> { let this = self.eval_context_mut(); - // Try getting the function from the shared library. - let (lib, lib_path) = this.machine.native_lib.as_ref().unwrap(); - let func: libloading::Symbol<'_, unsafe extern "C" fn()> = - unsafe { lib.get(link_name.as_str().as_bytes()).ok()? }; - #[expect(clippy::as_conversions)] // fn-ptr to raw-ptr cast needs `as`. - let fn_ptr = *func.deref() as *mut std::ffi::c_void; + // Try getting the function from one of the shared libraries. + for (lib, lib_path) in &this.machine.native_lib { + let Ok(func): Result<libloading::Symbol<'_, unsafe extern "C" fn()>, _> = + (unsafe { lib.get(link_name.as_str().as_bytes()) }) + else { + continue; + }; + #[expect(clippy::as_conversions)] // fn-ptr to raw-ptr cast needs `as`. + let fn_ptr = *func.deref() as *mut std::ffi::c_void; - // FIXME: this is a hack! - // The `libloading` crate will automatically load system libraries like `libc`. - // On linux `libloading` is based on `dlsym`: https://docs.rs/libloading/0.7.3/src/libloading/os/unix/mod.rs.html#202 - // and `dlsym`(https://linux.die.net/man/3/dlsym) looks through the dependency tree of the - // library if it can't find the symbol in the library itself. - // So, in order to check if the function was actually found in the specified - // `machine.external_so_lib` we need to check its `dli_fname` and compare it to - // the specified SO file path. - // This code is a reimplementation of the mechanism for getting `dli_fname` in `libloading`, - // from: https://docs.rs/libloading/0.7.3/src/libloading/os/unix/mod.rs.html#411 - // using the `libc` crate where this interface is public. - let mut info = std::mem::MaybeUninit::<libc::Dl_info>::zeroed(); - unsafe { - if libc::dladdr(fn_ptr, info.as_mut_ptr()) != 0 { - let info = info.assume_init(); - #[cfg(target_os = "cygwin")] - let fname_ptr = info.dli_fname.as_ptr(); - #[cfg(not(target_os = "cygwin"))] - let fname_ptr = info.dli_fname; - assert!(!fname_ptr.is_null()); - if std::ffi::CStr::from_ptr(fname_ptr).to_str().unwrap() - != lib_path.to_str().unwrap() - { - return None; + // FIXME: this is a hack! + // The `libloading` crate will automatically load system libraries like `libc`. + // On linux `libloading` is based on `dlsym`: https://docs.rs/libloading/0.7.3/src/libloading/os/unix/mod.rs.html#202 + // and `dlsym`(https://linux.die.net/man/3/dlsym) looks through the dependency tree of the + // library if it can't find the symbol in the library itself. + // So, in order to check if the function was actually found in the specified + // `machine.external_so_lib` we need to check its `dli_fname` and compare it to + // the specified SO file path. + // This code is a reimplementation of the mechanism for getting `dli_fname` in `libloading`, + // from: https://docs.rs/libloading/0.7.3/src/libloading/os/unix/mod.rs.html#411 + // using the `libc` crate where this interface is public. + let mut info = std::mem::MaybeUninit::<libc::Dl_info>::zeroed(); + unsafe { + if libc::dladdr(fn_ptr, info.as_mut_ptr()) != 0 { + let info = info.assume_init(); + #[cfg(target_os = "cygwin")] + let fname_ptr = info.dli_fname.as_ptr(); + #[cfg(not(target_os = "cygwin"))] + let fname_ptr = info.dli_fname; + assert!(!fname_ptr.is_null()); + if std::ffi::CStr::from_ptr(fname_ptr).to_str().unwrap() + != lib_path.to_str().unwrap() + { + return None; + } } } - } - // Return a pointer to the function. - Some(CodePtr(fn_ptr)) + // Return a pointer to the function. + return Some(CodePtr(fn_ptr)); + } + None } } |