diff options
Diffstat (limited to 'src/bootstrap/configure.py')
| -rwxr-xr-x | src/bootstrap/configure.py | 417 |
1 files changed, 219 insertions, 198 deletions
diff --git a/src/bootstrap/configure.py b/src/bootstrap/configure.py index b326ae402aa..dc2271bdf27 100755 --- a/src/bootstrap/configure.py +++ b/src/bootstrap/configure.py @@ -205,77 +205,78 @@ if '--help' in sys.argv or '-h' in sys.argv: # Parse all command line arguments into one of these three lists, handling # boolean and value-based options separately -unknown_args = [] -need_value_args = [] -known_args = {} - -p("processing command line") -i = 1 -while i < len(sys.argv): - arg = sys.argv[i] - i += 1 - if not arg.startswith('--'): - unknown_args.append(arg) - continue - - found = False - for option in options: - value = None - if option.value: - keyval = arg[2:].split('=', 1) - key = keyval[0] - if option.name != key: - continue +def parse_args(args): + unknown_args = [] + need_value_args = [] + known_args = {} + + i = 0 + while i < len(args): + arg = args[i] + i += 1 + if not arg.startswith('--'): + unknown_args.append(arg) + continue - if len(keyval) > 1: - value = keyval[1] - elif i < len(sys.argv): - value = sys.argv[i] - i += 1 - else: - need_value_args.append(arg) - continue - else: - if arg[2:] == 'enable-' + option.name: - value = True - elif arg[2:] == 'disable-' + option.name: - value = False + found = False + for option in options: + value = None + if option.value: + keyval = arg[2:].split('=', 1) + key = keyval[0] + if option.name != key: + continue + + if len(keyval) > 1: + value = keyval[1] + elif i < len(args): + value = args[i] + i += 1 + else: + need_value_args.append(arg) + continue else: - continue + if arg[2:] == 'enable-' + option.name: + value = True + elif arg[2:] == 'disable-' + option.name: + value = False + else: + continue - found = True - if option.name not in known_args: - known_args[option.name] = [] - known_args[option.name].append((option, value)) - break - - if not found: - unknown_args.append(arg) -p("") - -# Note: here and a few other places, we use [-1] to apply the *last* value -# passed. But if option-checking is enabled, then the known_args loop will -# also assert that options are only passed once. -option_checking = ('option-checking' not in known_args - or known_args['option-checking'][-1][1]) -if option_checking: - if len(unknown_args) > 0: - err("Option '" + unknown_args[0] + "' is not recognized") - if len(need_value_args) > 0: - err("Option '{0}' needs a value ({0}=val)".format(need_value_args[0])) - -# Parse all known arguments into a configuration structure that reflects the -# TOML we're going to write out -config = {} - - -def build(): + found = True + if option.name not in known_args: + known_args[option.name] = [] + known_args[option.name].append((option, value)) + break + + if not found: + unknown_args.append(arg) + + # Note: here and a few other places, we use [-1] to apply the *last* value + # passed. But if option-checking is enabled, then the known_args loop will + # also assert that options are only passed once. + option_checking = ('option-checking' not in known_args + or known_args['option-checking'][-1][1]) + if option_checking: + if len(unknown_args) > 0: + err("Option '" + unknown_args[0] + "' is not recognized") + if len(need_value_args) > 0: + err("Option '{0}' needs a value ({0}=val)".format(need_value_args[0])) + + config = {} + + set('build.configure-args', sys.argv[1:], config) + apply_args(known_args, option_checking, config) + return parse_example_config(known_args, config) + + +def build(known_args): if 'build' in known_args: return known_args['build'][-1][1] return bootstrap.default_build_triple(verbose=False) -def set(key, value): +def set(key, value, config): if isinstance(value, list): # Remove empty values, which value.split(',') tends to generate. value = [v for v in value if v] @@ -297,75 +298,76 @@ def set(key, value): arr = arr[part] -for key in known_args: - # The `set` option is special and can be passed a bunch of times - if key == 'set': - for option, value in known_args[key]: - keyval = value.split('=', 1) - if len(keyval) == 1 or keyval[1] == "true": - value = True - elif keyval[1] == "false": - value = False - else: - value = keyval[1] - set(keyval[0], value) - continue - - # Ensure each option is only passed once - arr = known_args[key] - if option_checking and len(arr) > 1: - err("Option '{}' provided more than once".format(key)) - option, value = arr[-1] - - # If we have a clear avenue to set our value in rustbuild, do so - if option.rustbuild is not None: - set(option.rustbuild, value) - continue - - # Otherwise we're a "special" option and need some extra handling, so do - # that here. - if option.name == 'sccache': - set('llvm.ccache', 'sccache') - elif option.name == 'local-rust': - for path in os.environ['PATH'].split(os.pathsep): - if os.path.exists(path + '/rustc'): - set('build.rustc', path + '/rustc') - break - for path in os.environ['PATH'].split(os.pathsep): - if os.path.exists(path + '/cargo'): - set('build.cargo', path + '/cargo') - break - elif option.name == 'local-rust-root': - set('build.rustc', value + '/bin/rustc') - set('build.cargo', value + '/bin/cargo') - elif option.name == 'llvm-root': - set('target.{}.llvm-config'.format(build()), value + '/bin/llvm-config') - elif option.name == 'llvm-config': - set('target.{}.llvm-config'.format(build()), value) - elif option.name == 'llvm-filecheck': - set('target.{}.llvm-filecheck'.format(build()), value) - elif option.name == 'tools': - set('build.tools', value.split(',')) - elif option.name == 'codegen-backends': - set('rust.codegen-backends', value.split(',')) - elif option.name == 'host': - set('build.host', value.split(',')) - elif option.name == 'target': - set('build.target', value.split(',')) - elif option.name == 'full-tools': - set('rust.codegen-backends', ['llvm']) - set('rust.lld', True) - set('rust.llvm-tools', True) - set('build.extended', True) - elif option.name == 'option-checking': - # this was handled above - pass - elif option.name == 'dist-compression-formats': - set('dist.compression-formats', value.split(',')) - else: - raise RuntimeError("unhandled option {}".format(option.name)) +def apply_args(known_args, option_checking, config): + for key in known_args: + # The `set` option is special and can be passed a bunch of times + if key == 'set': + for option, value in known_args[key]: + keyval = value.split('=', 1) + if len(keyval) == 1 or keyval[1] == "true": + value = True + elif keyval[1] == "false": + value = False + else: + value = keyval[1] + set(keyval[0], value, config) + continue -set('build.configure-args', sys.argv[1:]) + # Ensure each option is only passed once + arr = known_args[key] + if option_checking and len(arr) > 1: + err("Option '{}' provided more than once".format(key)) + option, value = arr[-1] + + # If we have a clear avenue to set our value in rustbuild, do so + if option.rustbuild is not None: + set(option.rustbuild, value, config) + continue + + # Otherwise we're a "special" option and need some extra handling, so do + # that here. + build_triple = build(known_args) + + if option.name == 'sccache': + set('llvm.ccache', 'sccache', config) + elif option.name == 'local-rust': + for path in os.environ['PATH'].split(os.pathsep): + if os.path.exists(path + '/rustc'): + set('build.rustc', path + '/rustc', config) + break + for path in os.environ['PATH'].split(os.pathsep): + if os.path.exists(path + '/cargo'): + set('build.cargo', path + '/cargo', config) + break + elif option.name == 'local-rust-root': + set('build.rustc', value + '/bin/rustc', config) + set('build.cargo', value + '/bin/cargo', config) + elif option.name == 'llvm-root': + set('target.{}.llvm-config'.format(build_triple), value + '/bin/llvm-config', config) + elif option.name == 'llvm-config': + set('target.{}.llvm-config'.format(build_triple), value, config) + elif option.name == 'llvm-filecheck': + set('target.{}.llvm-filecheck'.format(build_triple), value, config) + elif option.name == 'tools': + set('build.tools', value.split(','), config) + elif option.name == 'codegen-backends': + set('rust.codegen-backends', value.split(','), config) + elif option.name == 'host': + set('build.host', value.split(','), config) + elif option.name == 'target': + set('build.target', value.split(','), config) + elif option.name == 'full-tools': + set('rust.codegen-backends', ['llvm'], config) + set('rust.lld', True, config) + set('rust.llvm-tools', True, config) + set('build.extended', True, config) + elif option.name == 'option-checking': + # this was handled above + pass + elif option.name == 'dist-compression-formats': + set('dist.compression-formats', value.split(','), config) + else: + raise RuntimeError("unhandled option {}".format(option.name)) # "Parse" the `config.example.toml` file into the various sections, and we'll # use this as a template of a `config.toml` to write out which preserves @@ -373,46 +375,50 @@ set('build.configure-args', sys.argv[1:]) # # Note that the `target` section is handled separately as we'll duplicate it # per configured target, so there's a bit of special handling for that here. -sections = {} -cur_section = None -sections[None] = [] -section_order = [None] -targets = {} -top_level_keys = [] - -for line in open(rust_dir + '/config.example.toml').read().split("\n"): - if cur_section == None: - if line.count('=') == 1: - top_level_key = line.split('=')[0] - top_level_key = top_level_key.strip(' #') - top_level_keys.append(top_level_key) - if line.startswith('['): - cur_section = line[1:-1] - if cur_section.startswith('target'): - cur_section = 'target' - elif '.' in cur_section: - raise RuntimeError("don't know how to deal with section: {}".format(cur_section)) - sections[cur_section] = [line] - section_order.append(cur_section) - else: - sections[cur_section].append(line) - -# Fill out the `targets` array by giving all configured targets a copy of the -# `target` section we just loaded from the example config -configured_targets = [build()] -if 'build' in config: - if 'host' in config['build']: - configured_targets += config['build']['host'] - if 'target' in config['build']: - configured_targets += config['build']['target'] -if 'target' in config: - for target in config['target']: - configured_targets.append(target) -for target in configured_targets: - targets[target] = sections['target'][:] - # For `.` to be valid TOML, it needs to be quoted. But `bootstrap.py` doesn't use a proper TOML parser and fails to parse the target. - # Avoid using quotes unless it's necessary. - targets[target][0] = targets[target][0].replace("x86_64-unknown-linux-gnu", "'{}'".format(target) if "." in target else target) +def parse_example_config(known_args, config): + sections = {} + cur_section = None + sections[None] = [] + section_order = [None] + targets = {} + top_level_keys = [] + + for line in open(rust_dir + '/config.example.toml').read().split("\n"): + if cur_section == None: + if line.count('=') == 1: + top_level_key = line.split('=')[0] + top_level_key = top_level_key.strip(' #') + top_level_keys.append(top_level_key) + if line.startswith('['): + cur_section = line[1:-1] + if cur_section.startswith('target'): + cur_section = 'target' + elif '.' in cur_section: + raise RuntimeError("don't know how to deal with section: {}".format(cur_section)) + sections[cur_section] = [line] + section_order.append(cur_section) + else: + sections[cur_section].append(line) + + # Fill out the `targets` array by giving all configured targets a copy of the + # `target` section we just loaded from the example config + configured_targets = [build(known_args)] + if 'build' in config: + if 'host' in config['build']: + configured_targets += config['build']['host'] + if 'target' in config['build']: + configured_targets += config['build']['target'] + if 'target' in config: + for target in config['target']: + configured_targets.append(target) + for target in configured_targets: + targets[target] = sections['target'][:] + # For `.` to be valid TOML, it needs to be quoted. But `bootstrap.py` doesn't use a proper TOML parser and fails to parse the target. + # Avoid using quotes unless it's necessary. + targets[target][0] = targets[target][0].replace("x86_64-unknown-linux-gnu", "'{}'".format(target) if "." in target else target) + + configure_file(sections, top_level_keys, targets, config) + return section_order, sections, targets def is_number(value): @@ -475,17 +481,20 @@ def configure_top_level_key(lines, top_level_key, value): raise RuntimeError("failed to find config line for {}".format(top_level_key)) -for section_key, section_config in config.items(): - if section_key not in sections and section_key not in top_level_keys: - raise RuntimeError("config key {} not in sections or top_level_keys".format(section_key)) - if section_key in top_level_keys: - configure_top_level_key(sections[None], section_key, section_config) +# Modify `sections` to reflect the parsed arguments and example configs. +def configure_file(sections, top_level_keys, targets, config): + for section_key, section_config in config.items(): + if section_key not in sections and section_key not in top_level_keys: + raise RuntimeError("config key {} not in sections or top_level_keys".format(section_key)) + if section_key in top_level_keys: + configure_top_level_key(sections[None], section_key, section_config) + + elif section_key == 'target': + for target in section_config: + configure_section(targets[target], section_config[target]) + else: + configure_section(sections[section_key], section_config) - elif section_key == 'target': - for target in section_config: - configure_section(targets[target], section_config[target]) - else: - configure_section(sections[section_key], section_config) def write_uncommented(target, f): block = [] @@ -503,24 +512,36 @@ def write_uncommented(target, f): is_comment = is_comment and line.startswith('#') return f -# Now that we've built up our `config.toml`, write it all out in the same -# order that we read it in. -p("") -p("writing `config.toml` in current directory") -with bootstrap.output('config.toml') as f: + +def write_config_toml(writer, section_order, targets, sections): for section in section_order: if section == 'target': for target in targets: - f = write_uncommented(targets[target], f) + writer = write_uncommented(targets[target], writer) else: - f = write_uncommented(sections[section], f) - -with bootstrap.output('Makefile') as f: - contents = os.path.join(rust_dir, 'src', 'bootstrap', 'mk', 'Makefile.in') - contents = open(contents).read() - contents = contents.replace("$(CFG_SRC_DIR)", rust_dir + '/') - contents = contents.replace("$(CFG_PYTHON)", sys.executable) - f.write(contents) - -p("") -p("run `python {}/x.py --help`".format(rust_dir)) + writer = write_uncommented(sections[section], writer) + + +if __name__ == "__main__": + p("processing command line") + # Parse all known arguments into a configuration structure that reflects the + # TOML we're going to write out + p("") + section_order, sections, targets = parse_args(sys.argv[1:]) + + # Now that we've built up our `config.toml`, write it all out in the same + # order that we read it in. + p("") + p("writing `config.toml` in current directory") + with bootstrap.output('config.toml') as f: + write_config_toml(f, section_order, targets, sections) + + with bootstrap.output('Makefile') as f: + contents = os.path.join(rust_dir, 'src', 'bootstrap', 'mk', 'Makefile.in') + contents = open(contents).read() + contents = contents.replace("$(CFG_SRC_DIR)", rust_dir + '/') + contents = contents.replace("$(CFG_PYTHON)", sys.executable) + f.write(contents) + + p("") + p("run `python {}/x.py --help`".format(rust_dir)) |