| Age | Commit message (Collapse) | Author | Lines |
|
Trivial improve doc for transpose
When I saw old doc, I felt a little confused.
Seems it would be clearer this way.
|
|
Remove the `#[no_sanitize]` attribute in favor of `#[sanitize(xyz = "on|off")]`
This came up during the sanitizer stabilization (rust-lang/rust#123617). Instead of a `#[no_sanitize(xyz)]` attribute, we would like to have a `#[sanitize(xyz = "on|off")]` attribute, which is more powerful and allows to be extended in the future (instead
of just focusing on turning sanitizers off). The implementation is done according to what was [discussed on Zulip](https://rust-lang.zulipchat.com/#narrow/channel/343119-project-exploit-mitigations/topic/Stabilize.20the.20.60no_sanitize.60.20attribute/with/495377292)).
The new attribute also works on modules, traits and impl items and thus enables usage as the following:
```rust
#[sanitize(address = "off")]
mod foo {
fn unsanitized(..) {}
#[sanitize(address = "on")]
fn sanitized(..) {}
}
trait MyTrait {
#[sanitize(address = "off")]
fn unsanitized_default(..) {}
}
#[sanitize(thread = "off")]
impl MyTrait for () {
...
}
```
r? ```@rcvalle```
|
|
Stabilize `ip_from`
Tracking issue: rust-lang/rust#131360
Stabilizes and const-stabilizes the following APIs:
```rust
// core::net
impl Ipv4Addr {
pub const fn from_octets(octets: [u8; 4]) -> Ipv4Addr;
}
impl Ipv6Addr {
pub const fn from_octets(octets: [u8; 16]) -> Ipv6Addr;
pub const fn from_segments(segments: [u16; 8]) -> Ipv6Addr;
}
```
Closes rust-lang/rust#131360
```@rustbot``` label +needs-fcp
|
|
`impl PartialEq<{str,String}> for {Path,PathBuf}`
This is a revival of #105877
Comparison of paths and strings is expected to be possible and needed e.g. in tests. This change adds the impls os `PartialEq` between strings and paths, both owned and unsized, in both directions.
ACP: https://github.com/rust-lang/libs-team/issues/151
|
|
ci: add timeout to windows disk cleanup wait
|
|
library: Migrate from `cfg_if` to `cfg_select`
Migrate the standard library from using the external `cfg_if` crate to using the now-built-in `cfg_select` macro.
This does not yet eliminate the dependency from `library/std/Cargo.toml`, because while the standard library itself no longer uses `cfg_if`, it also incorporates the `backtrace` crate, which does.
Migration assisted by the following vim command (after selecting the full `cfg_if!` invocation):
```
'<,'>s/\(cfg_if::\)\?cfg_if/cfg_select/ | '<,'>s/^\( *\)} else {/\1}\r\1_ => {/c | '<,'>s/^\( *\)} else if #\[cfg(\(.*\))\] /\1}\r\1\2 => /e | '<,'>s/if #\[cfg(\(.*\))\] {/\1 => {/e
```
This is imperfect, but substantially accelerated the process. This prompts for confirmation on the `} else {` since that can also appear inside one of the arms. This also requires manual intervention to handle any multi-line conditions.
|
|
Update cargo
28 commits in 840b83a10fb0e039a83f4d70ad032892c287570a..71eb84f21aef43c07580c6aed6f806a6299f5042
2025-07-30 13:59:19 +0000 to 2025-08-17 17:18:56 +0000
- update tests to match lint message changes from rust-lang/rust#140794 (rust-lang/cargo#15849)
- chore: downgrade to libc@0.2.174 (rust-lang/cargo#15851)
- Reorder `lto` options in profiles.md (rust-lang/cargo#15841)
- feat(unstable): add -Zbuild-analysis unstable feature (rust-lang/cargo#15845)
- refactor(unstable): group stabilized features (rust-lang/cargo#15846)
- Fixes error while running the cargo clippy --all-targets -- -D warning (rust-lang/cargo#15843)
- Clarify that `cargo doc --no-deps` is cumulative and won’t delete prev (rust-lang/cargo#15800)
- docs: Formatting and cross-linking to build-dir/target-dir docs (rust-lang/cargo#15840)
- Stabilize `build.build-dir` (rust-lang/cargo#15833)
- make resolve features public for cargo-as-a-library (rust-lang/cargo#15835)
- chore(deps): bump slab from 0.4.10 to 0.4.11 (rust-lang/cargo#15832)
- chore: remove x86_64-apple-darwin from CI and tests (rust-lang/cargo#15831)
- chore(deps): update msrv (3 versions) to v1.87 (rust-lang/cargo#15819)
- perf(package): Always reuse the workspace's target-dir (rust-lang/cargo#15783)
- More helpful error for invalid cargo-features = [] (rust-lang/cargo#15781)
- Add initial integration for `--json=timings` behing `-Zsection-timings` (rust-lang/cargo#15780)
- add is_inherited methods to InheritableDependency and InheritableField (rust-lang/cargo#15828)
- chore(deps): update compatible (rust-lang/cargo#15804)
- docs(unstable): Link out to the Plumbing commands effort (rust-lang/cargo#15821)
- chore(deps): update cargo-semver-checks to v0.43.0 (rust-lang/cargo#15825)
- test(build-std): relax the thread name assertion (rust-lang/cargo#15822)
- chore(deps): update msrv (1 version) to v1.89 (rust-lang/cargo#15815)
- Update semver tests for 1.89 (rust-lang/cargo#15816)
- Accessing each build script's `OUT_DIR` and in the correct order (rust-lang/cargo#15776)
- chore: bump to 0.92.0; update changelog (rust-lang/cargo#15807)
- docs: `-Zpackage-workspace` has been stabilized (rust-lang/cargo#15808)
- chore(deps): update rust crate cargo_metadata to 0.21.0 (rust-lang/cargo#15795)
- docs(build-rs): Fix broken intra-doc links (rust-lang/cargo#15810)
|
|
Rollup of 10 pull requests
Successful merges:
- rust-lang/rust#144838 (Fix outdated doc comment)
- rust-lang/rust#145206 (Port `#[custom_mir(..)]` to the new attribute system)
- rust-lang/rust#145208 (Implement declarative (`macro_rules!`) derive macros (RFC 3698))
- rust-lang/rust#145309 (Fix `-Zregparm` for LLVM builtins)
- rust-lang/rust#145355 (Add codegen test for issue 122734)
- rust-lang/rust#145420 (cg_llvm: Use LLVM-C bindings for `LLVMSetTailCallKind`, `LLVMGetTypeKind`)
- rust-lang/rust#145451 (Add static glibc to the nix dev shell)
- rust-lang/rust#145460 (Speedup `copy_src_dirs` in bootstrap)
- rust-lang/rust#145476 (Fix typo in doc for library/std/src/fs.rs#set_permissions)
- rust-lang/rust#145485 (Fix deprecation attributes on foreign statics)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
|
|
This removes the #[no_sanitize] attribute, which was behind an unstable
feature named no_sanitize. Instead, we introduce the sanitize attribute
which is more powerful and allows to be extended in the future (instead
of just focusing on turning sanitizers off).
This also makes sanitize(kernel_address = ..) attribute work with
-Zsanitize=address
To do it the same as how clang disables address sanitizer, we now
disable ASAN on sanitize(kernel_address = "off") and KASAN on
sanitize(address = "off").
The same was added to clang in https://reviews.llvm.org/D44981.
|
|
This change implements the #[sanitize(..)] attribute, which opts to
replace the currently unstable #[no_sanitize]. Essentially the new
attribute works similar as #[no_sanitize], just with more flexible
options regarding where it is applied. E.g. it is possible to turn
a certain sanitizer either on or off:
`#[sanitize(address = "on|off")]`
This attribute now also applies to more places, e.g. it is possible
to turn off a sanitizer for an entire module or impl block:
```rust
\#[sanitize(address = "off")]
mod foo {
fn unsanitized(..) {}
#[sanitize(address = "on")]
fn sanitized(..) {}
}
\#[sanitize(thread = "off")]
impl MyTrait for () {
...
}
```
This attribute is enabled behind the unstable `sanitize` feature.
|
|
r=jdonszelmann
Fix deprecation attributes on foreign statics
r? ````````@jdonszelmann````````
Fixes https://github.com/rust-lang/rust/issues/145437
|
|
Fix typo in doc for library/std/src/fs.rs#set_permissions
"privalage" -> "privilege".
Was reading the docs and have noticed this.
|
|
Speedup `copy_src_dirs` in bootstrap
I was kinda offended by how slow it was. Just the `copy_src_dirs` part took ~3s locally in the `x dist rustc-src` step. In release mode it was just 1s, but that's kind of cheating (I wonder if we should build bootstrap in release mode on CI though...).
Did some basic optimizations to bring it down to ~1s also in debug mode.
Maybe it's overkill, due to https://github.com/rust-lang/rust/pull/145455. Up to you whether we should merge it or close it :)
r? `````````@jieyouxu`````````
|
|
Add static glibc to the nix dev shell
This fixes `tests/ui/process/nofile-limit.rs` which fails to link on nixos for me without this change.
|
|
cg_llvm: Use LLVM-C bindings for `LLVMSetTailCallKind`, `LLVMGetTypeKind`
This PR replaces two existing `LLVMRust` bindings with equivalent calls to the LLVM-C API.
For `LLVMGetTypeKind`, we avoid the UB hazard by declaring the foreign function to return `RawEnum<TypeKind>` (which is a wrapper around `u32`), and then perform checked conversion from `u32` to `TypeKind`.
|
|
Add codegen test for issue 122734
Closes rust-lang/rust#122734
|
|
Fix `-Zregparm` for LLVM builtins
This fixes the issue where `-Zregparm=N` was not working correctly when calling LLVM intrinsics
By default on `x86-32`, arguments are passed on the stack. The `-Zregparm=N` flag allows the first `N` arguments to be passed in registers instead.
When calling intrinsics like `memset`, LLVM still passes parameters on the stack, which prevents optimizations like tail calls.
As proposed by ````@tgross35,```` I fixed this by setting the `NumRegisterParameters` LLVM module flag to `N` when the `-Zregparm=N` is set.
```rust
// compiler/rust_codegen_llvm/src/context.rs#375-382
if let Some(regparm_count) = sess.opts.unstable_opts.regparm {
llvm::add_module_flag_u32(
llmod,
llvm::ModuleFlagMergeBehavior::Error,
"NumRegisterParameters",
regparm_count,
);
}
```
[Here](https://rust.godbolt.org/z/YMezreo48) is a before/after compiler explorer.
Here is the final result for the code snippet in the original issue:
```asm
entrypoint:
push esi
mov esi, eax
mov eax, ecx
mov ecx, esi
pop esi
jmp memset ; Tail call parameters in registers
```
Fixes: https://github.com/rust-lang/rust/issues/145271
|
|
Implement declarative (`macro_rules!`) derive macros (RFC 3698)
This is a draft for review, and should not be merged yet.
This is layered atop https://github.com/rust-lang/rust/pull/145153 , and has
only two additional commits atop that. The first handles parsing and provides a
test for various parse errors. The second implements expansion and handles
application.
This implements RFC 3698, "Declarative (`macro_rules!`) derive macros".
Tracking issue: https://github.com/rust-lang/rust/issues/143549
This has one remaining issue, which I could use some help debugging: in
`tests/ui/macros/macro-rules-derive-error.rs`, the diagnostics for
`derive(fn_only)` (for a `fn_only` with no `derive` rules) and
`derive(ForwardReferencedDerive)` both get emitted twice, as a duplicate
diagnostic.
From what I can tell via adding some debugging code,
`unresolved_macro_suggestions` is getting called twice from
`finalize_macro_resolutions` for each of them, because
`self.single_segment_macro_resolutions` has two entries for the macro, with two
different `parent_scope` values. I'm not clear on why that happened; it doesn't
happen with the equivalent code using attrs.
I'd welcome any suggestions for fixing this.
|
|
Port `#[custom_mir(..)]` to the new attribute system
r? ``````````@jdonszelmann``````````
|
|
Fix outdated doc comment
This updates the documentation comment for `Type::is_doc_subtype_of` to more accurately describe its purpose as a subtyping check, rather than equality
fixes rust-lang/rust#138572
r? ````````````@tgross35````````````
|
|
|
|
|
|
Print regions in `type_name`.
Currently they are skipped, which is a bit weird, and it sometimes causes malformed output like `Foo<>` and `dyn Bar<, A = u32>`.
Most regions are erased by the time `type_name` does its work. So all regions are now printed as `'_` in non-optional places. Not perfect, but better than the status quo.
`c_name` is updated to trim lifetimes from MIR pass names, so that the `PASS_NAMES` sanity check still works. It is also renamed as `simplify_pass_type_name` and made non-const, because it doesn't need to be const and the non-const implementation is much shorter.
The commit also renames `should_print_region` as `should_print_optional_region`, which makes it clearer that it only applies to some regions.
Fixes rust-lang/rust#145168.
r? `@lcnr`
|
|
const-eval: full support for pointer fragments
This fixes https://github.com/rust-lang/const-eval/issues/72 and makes `swap_nonoverlapping` fully work in const-eval by enhancing per-byte provenance tracking with tracking of *which* of the bytes of the pointer this one is. Later, if we see all the same bytes in the exact same order, we can treat it like a whole pointer again without ever risking a leak of the data bytes (that encode the offset into the allocation). This lifts the limitation that was discussed quite a bit in https://github.com/rust-lang/rust/pull/137280.
For a concrete piece of code that used to fail and now works properly consider this example doing a byte-for-byte memcpy in const without using intrinsics:
```rust
use std::{mem::{self, MaybeUninit}, ptr};
type Byte = MaybeUninit<u8>;
const unsafe fn memcpy(dst: *mut Byte, src: *const Byte, n: usize) {
let mut i = 0;
while i < n {
*dst.add(i) = *src.add(i);
i += 1;
}
}
const _MEMCPY: () = unsafe {
let ptr = &42;
let mut ptr2 = ptr::null::<i32>();
// Copy from ptr to ptr2.
memcpy(&mut ptr2 as *mut _ as *mut _, &ptr as *const _ as *const _, mem::size_of::<&i32>());
assert!(*ptr2 == 42);
};
```
What makes this code tricky is that pointers are "opaque blobs" in const-eval, we cannot just let people look at the individual bytes since *we don't know what those bytes look like* -- that depends on the absolute address the pointed-to object will be placed at. The code above "breaks apart" a pointer into individual bytes, and then puts them back together in the same order elsewhere. This PR implements the logic to properly track how those individual bytes relate to the original pointer, and to recognize when they are in the right order again.
We still reject constants where the final value contains a not-fully-put-together pointer: I have no idea how one could construct an LLVM global where one byte is defined as "the 3rd byte of a pointer to that other global over there" -- and even if LLVM supports this somehow, we can leave implementing that to a future PR. It seems unlikely to me anyone would even want this, but who knows.^^
This also changes the behavior of Miri, by tracking the order of bytes with provenance and only considering a pointer to have valid provenance if all bytes are in the original order again. This is related to https://github.com/rust-lang/unsafe-code-guidelines/issues/558. It means one cannot implement XOR linked lists with strict provenance any more, which is however only of theoretical interest. Practically I am curious if anyone will show up with any code that Miri now complains about - that would be interesting data. Cc `@rust-lang/opsem`
|
|
The previous code inside `cfg_if!` wasn't indented, so the conversion to
`cfg_select!` left it not indented. Indent it.
|
|
Migrate the standard library from using the external `cfg_if` crate to
using the now-built-in `cfg_select` macro.
This does not yet eliminate the dependency from
`library/std/Cargo.toml`, because while the standard library itself no
longer uses `cfg_if`, it also incorporates the `backtrace` crate, which
does.
Migration assisted by the following vim command (after selecting the
full `cfg_if!` invocation):
```
'<,'>s/\(cfg_if::\)\?cfg_if/cfg_select/ | '<,'>s/^\( *\)} else {/\1}\r\1_ => {/c | '<,'>s/^\( *\)} else if #\[cfg(\(.*\))\] /\1}\r\1\2 => /e | '<,'>s/if #\[cfg(\(.*\))\] {/\1 => {/e
```
This is imperfect, but substantially accelerated the process. This
prompts for confirmation on the `} else {` since that can also appear
inside one of the arms. This also requires manual intervention to handle
any multi-line conditions.
|
|
Revert "Partially outline code inside the panic! macro".
This reverts https://github.com/rust-lang/rust/pull/115670
Without any tests/benchmarks that show some improvement, it's hard to know whether the change had any positive effect. (And if it did, whether that effect is still achieved today.)
|
|
|
|
|
|
|
|
The target is removed by `copy_link` too, so no need to duplicate the syscall.
|
|
Rollup of 11 pull requests
Successful merges:
- rust-lang/rust#143717 (Add `Default` impls for `Pin`ned `Box`, `Rc`, `Arc`)
- rust-lang/rust#144054 (Stabilize as_array_of_cells)
- rust-lang/rust#144907 (fix: Reject async assoc fns of const traits/impls in ast_passes)
- rust-lang/rust#144922 (Implement `#[derive(From)]`)
- rust-lang/rust#144963 (Stabilize `core::iter::chain`)
- rust-lang/rust#145436 (fix(tests/rmake/wasm-unexpected-features): change features from `WASM1` to `MVP`)
- rust-lang/rust#145453 (Remove duplicated tracing span in bootstrap)
- rust-lang/rust#145454 (Fix tracing debug representation of steps without arguments in bootstrap)
- rust-lang/rust#145455 (Do not copy files in `copy_src_dirs` in dry run)
- rust-lang/rust#145462 (Stabilize `const_exposed_provenance` feature)
- rust-lang/rust#145466 (Enable new `[range-diff]` feature in triagebot)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
"privalage" -> "privilege"
|
|
Enable new `[range-diff]` feature in triagebot
This new feature adds a comment to triagebot range-diff feature when a PR is rebased onto a different base/master commit.
Related to [#t-compiler > Experimental range-diff for force-push @ 💬](https://rust-lang.zulipchat.com/#narrow/channel/131828-t-compiler/topic/Experimental.20range-diff.20for.20force-push/near/534649322)
r? Kobzol
|
|
Stabilize `const_exposed_provenance` feature
This closes [tracking issue](https://github.com/rust-lang/rust/issues/144538) and stabilises `fn with_exposed_provenance` and `fn with_exposed_provenance_mut` in const
|
|
Do not copy files in `copy_src_dirs` in dry run
This reduces the time to run the current 9 dist snapshot tests from ~24s to ~2s on my PC.
r? `@jieyouxu`
|
|
Fix tracing debug representation of steps without arguments in bootstrap
I was wondering why I see `lainSourceTarbal` in tracing logs...
r? `@jieyouxu`
|
|
Remove duplicated tracing span in bootstrap
`trace_cmd` is now called also in the `stream` method, so including it also here was duplicating command spans.
r? `@jieyouxu`
|
|
fix(tests/rmake/wasm-unexpected-features): change features from `WASM1` to `MVP`
missed this in rust-lang/rust#145275
since test calls `rustc` with `-C target-cpu mvp`
try-job: `test-various`
|
|
r=jhpratt
Stabilize `core::iter::chain`
Closes rust-lang/rust#125964
|
|
Implement `#[derive(From)]`
Implements the `#[derive(From)]` feature ([tracking issue](https://github.com/rust-lang/rust/issues/144889), [RFC](https://github.com/rust-lang/rfcs/pull/3809)).
It allows deriving the `From` impl on structs and tuple structs with exactly one field. Some implementation notes:
- I wasn't exactly sure which spans to use in the derive generating code, so I just used `span` everywhere. I don't know if it's the Right Thing To Do. In particular the errors when `#[derive(From)]` is used on a struct with an unsized field are weirdly duplicated.
- I had to solve an import stability problem, where if I just added the unstable `macro From` to `core::convert`, previously working code like `use std::convert::From` would suddenly require an unstable feature gate, because rustc would think that you're trying to import the unstable macro. `@petrochenkov` suggested that I add the macro the the core prelude instead. This has worked well, although it only works in edition 2021+. Not sure if I botched the prelude somehow and it should live elsewhere (?).
- I had to add `Ty::AstTy`, because the `from` function receives an argument with the type of the single field, and the existing variants of the `Ty` enum couldn't represent an arbitrary type.
|
|
fix: Reject async assoc fns of const traits/impls in ast_passes
Fixes rust-lang/rust#117629
|
|
Stabilize as_array_of_cells
This PR stabilizes
```rust
impl<T, const N: usize> Cell<[T; N]> {
pub const fn as_array_of_cells(&self) -> &[Cell<T>; N];
}
```
Stabilization report: https://github.com/rust-lang/rust/issues/88248#issuecomment-3082986863
Closes: https://github.com/rust-lang/rust/issues/88248
|
|
Add `Default` impls for `Pin`ned `Box`, `Rc`, `Arc`
Fixes rust-lang/rust#143688.
`@rustbot` label T-libs-api needs-fcp
Also needs a crater run, as the `Box` impls could theoretically be breaking due to `#[fundamental]` (though a [cursory search](https://github.com/search?q=%2Fimpl%28%3C.*%3E%29%3F+Default+for+Pin%3C%2F+path%3A*.rs&type=code) suggests this is unlikely to cause issues).
|
|
`apply_member_constraints`: fix placeholder check
Checking whether the member region is *an existential region from a higher universe* is just wrong and I am pretty sure we've added that check by accident as the naming was just horribly confusing before rust-lang/rust#140466.
I've encountered this issue separately while working on rust-lang/rust#139587, but feel like it's probably easier to separately FCP this change. This allows the following code to compile
```rust
trait Proj<'a> {
type Assoc;
}
impl<'a, 'b, F: FnOnce() -> &'b ()> Proj<'a> for F {
type Assoc = ();
}
fn is_proj<F: for<'a> Proj<'a>>(f: F) {}
fn define<'a>() -> impl Sized + use<'a> {
// This adds a use of `opaque::<'a>` with hidden type `&'unconstrained_b ()`.
// 'unconstrained_b is an inference variable from a higher universe as it gets
// created inside of the binder of `F: for<'a> Proj<'a>`. This previously
// caused us to not apply member constraints. We now do, constraining
// it to `'a`.
is_proj(define::<'a>);
&()
}
fn main() {}
```
This should not be breaking change, even in theory. Applying member constraints is incomplete in rare circumstances which means that applying them in more cases can cause spurious errors, cc rust-lang/rust#140569/rust-lang/rust#142073. However, as we always skipped these member regions in `apply_member_constraints` the skipped region is guaranteed to cause an error in `check_member_constraints` later on.
|
|
|
|
|
|
Rollup of 11 pull requests
Successful merges:
- rust-lang/rust#144210 (std: thread: Return error if setting thread stack size fails)
- rust-lang/rust#145310 (Reduce usage of `compiler_for` in bootstrap)
- rust-lang/rust#145311 (ci: clean windows disk space in background)
- rust-lang/rust#145340 (Split codegen backend check step into two and don't run it with `x check compiler`)
- rust-lang/rust#145408 (Deduplicate -L search paths)
- rust-lang/rust#145412 (Windows: Replace `GetThreadId`+`GetCurrentThread` with `GetCurrentThreadId`)
- rust-lang/rust#145413 (bootstrap: Reduce dependencies)
- rust-lang/rust#145426 (Fix typos in bootstrap.example.toml)
- rust-lang/rust#145430 (Fix wrong spans with external macros in the `dropping_copy_types` lint)
- rust-lang/rust#145431 (Enhance UI test output handling for runtime errors)
- rust-lang/rust#145448 (Autolabel `src/tools/{rustfmt,rust-analyzer}` changes with `T-{rustfmt,rust-analyzer}`)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
|