| Age | Commit message (Collapse) | Author | Lines |
|---|
|
For a rigid projection, recursively look at the self type's item bounds to fix the `associated_type_bounds` feature
Given a deeply nested rigid projection like `<<<T as Trait1>::Assoc1 as Trait2>::Assoc2 as Trait3>::Assoc3`, this PR adjusts both trait solvers to look at the item bounds for all of `Assoc3`, `Assoc2`, and `Assoc1` in order to satisfy a goal. We do this because the item bounds for projections may contain relevant bounds for *other* nested projections when the `associated_type_bounds` (ATB) feature is enabled. For example:
```rust
#![feature(associated_type_bounds)]
trait Trait1 {
type Assoc1: Trait2<Assoc2: Foo>;
// Item bounds for `Assoc1` are:
// `<Self as Trait1>::Assoc1: Trait2`
// `<<Self as Trait1>::Assoc1 as Trait2>::Assoc2: Foo`
}
trait Trait2 {
type Assoc2;
}
trait Foo {}
fn hello<T: Trait1>(x: <<T as Trait1>::Assoc1 as Trait2>::Assoc2) {
fn is_foo(_: impl Foo) {}
is_foo(x);
// Currently fails with:
// ERROR the trait bound `<<Self as Trait1>::Assoc1 as Trait2>::Assoc2: Foo` is not satisfied
}
```
This has been a long-standing place of brokenness for ATBs, and is also part of the reason why ATBs currently desugar so differently in various positions (i.e. sometimes desugaring to param-env bounds, sometimes desugaring to RPITs, etc). For example, in RPIT and TAIT position, `impl Foo<Bar: Baz>` currently desugars to `impl Foo<Bar = impl Baz>` because we do not currently take advantage of these nested item bounds if we desugared them into a single set of item bounds on the opaque. This is obviously both strange and unnecessary if we just take advantage of these bounds as we should.
## Approach
This PR repeatedly peels off each projection of a given goal's self type and tries to match its item bounds against a goal, repeating with the self type of the projection. This is pretty straightforward to implement in the new solver, only requiring us to loop on the self type of a rigid projection to discover inner rigid projections, and we also need to introduce an extra probe so we can normalize them.
In the old solver, we can do essentially the same thing, however we rely on the fact that projections *should* be normalized already. This is obviously not always the case -- however, in the case that they are not fully normalized, such as a projection which has both infer vars and, we bail out with ambiguity if we hit an infer var for the self type.
## Caveats
⚠️ In the old solver, this has the side-effect of actually stalling some higher-ranked trait goals of the form `for<'a> <?0 as Tr<'a>>: Tr2`. Because we stall them, they no longer are eagerly treated as error -- this cause some existing `known-bug` tests to go from fail -> pass.
I'm pretty unconvinced that this is a problem since we make code that we expect to pass in the *new* solver also pass in the *old* solver, though this obviously doesn't solve the *full* problem.
## And then also...
We also adjust the desugaring of ATB to always desugar to a regular associated bound, rather than sometimes to an impl Trait **except** for when the ATB is present in a `dyn Trait`. We need to lower `dyn Trait<Assoc: Bar>` to `dyn Trait<Assoc = impl Bar>` because object types need all of their associated types specified.
I would also be in favor of splitting out the ATB feature and/or removing support for object types in order to stabilize just the set of positions for which the ATB feature is consistent (i.e. always elaborates to a bound).
|
|
|
|
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
|
|
|
|
No need to take `ImplTraitContext` by ref
We used to mutate `ImplTraitContext`, so it used to be `&mut` mutable ref. Then I think it used to have non-`Copy` data in it, so we took it by `&` ref. Now, none of that remains, so just copy it around.
|
|
Add `SubdiagnosticMessageOp` as a trait alias.
It avoids a lot of repetition.
r? matthewjasper
|
|
It avoids a lot of repetition.
|
|
|
|
|
|
|
|
hir: Stop keeping prefixes for most of `use` list stems
And make sure all other imports have non-empty resolution lists.
Addresses one of FIXMEs in https://github.com/rust-lang/rust/pull/120206.
|
|
Rework support for async closures; allow them to return futures that borrow from the closure's captures
This PR implements a new lowering for async closures via `TyKind::CoroutineClosure` which handles the curious relationship between the closure and the coroutine that it returns.
I wrote up a bunch in [this hackmd](https://hackmd.io/`@compiler-errors/S1HvqQxca)` which will be copied to the dev guide after this PR lands, and hopefully left sufficient comments in the source code explaining why this change is as large as it is.
This also necessitates that they begin implementing the `AsyncFn`-family of traits, rather than the `Fn`-family of traits -- if you need `Fn` implementations, you should probably use the non-sugar `|| async {}` syntax instead.
Notably this PR does not yet implement `async Fn()` syntax sugar for bounds, but I expect to add those soon (**edit:** #120392). For now, users must use `AsyncFn()` traits directly, which necessitates adding the `async_fn_traits` feature gate as well. I will add this as a follow-up very soon.
r? oli-obk
This is based on top of #120322, but that PR is minimal.
|
|
|
|
|
|
|
|
parameters by move, and nothing else
|
|
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
|
|
Introduce support for `async` bound modifier on `Fn*` traits
Adds `async` to the list of `TraitBoundModifiers`, which instructs AST lowering to map the trait to an async flavor of the trait. For now, this is only supported for `Fn*` to `AsyncFn*`, and I expect that this manual mapping via lang items will be replaced with a better system in the future.
The motivation for adding these bounds is to separate the users of async closures from the exact trait desugaring of their callable bounds. Instead of users needing to be concerned with the `AsyncFn` trait, they should be able to write `async Fn()` and it will desugar to whatever underlying trait we decide is best for the lowering of async closures.
Note: rustfmt support can be done in the rustfmt repo after a subtree sync.
|
|
It's only ever used with a reference to `OwnerInfo` as an argument.
|
|
And make sure all other imports have non-empty resolution lists.
|
|
|
|
|
|
hir: Two preparatory changes for #120206
cc https://github.com/rust-lang/rust/pull/120206
r? ```@compiler-errors```
|
|
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
|
|
|
|
It has 1-to-1 correspondence to its expression id.
Also remove mostly useless `visit_let_expr`.
|
|
|
|
|
|
Get rid of the hir_owner query.
This query was meant as a firewall between `hir_owner_nodes` which is supposed to change often, and the queries that only depend on the item signature. That firewall was inefficient, leaking the contents of the HIR body through `HirId`s.
`hir_owner` incurs a significant cost, as we need to hash HIR twice in multiple modes. This PR proposes to remove it, and simplify the hashing scheme.
For the future, `def_kind`, `def_span`... are much more efficient for incremental decoupling, and should be preferred.
|
|
Move async closure parameters into the resultant closure's future eagerly
Move async closure parameters into the closure's resultant future eagerly.
Before, we used to desugar `async |p1, p2, ..| { body }` as `|p1, p2, ..| { || async { body } }`. Now, we desugar the above like `|p1, p2, ..| { async move { let p1 = p1; let p2 = p2; ... body } }`. This mirrors the same desugaring that `async fn` does with its parameter types, and the compiler literally uses the same code via a shared helper function.
This removes the necessity for E0708, since now expressions like `async |x: i32| { x }` will not give you confusing borrow errors.
This does *not* fix the case where async closures have self-borrows. This will come with a general implementation of async closures, which is still in the works.
r? oli-obk
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
r=compiler-errors
Support `~const` in associated functions in trait impls
Fixes #119700.
|
|
|
|
|
|
|
|
|
|
Use Expr instead. Use `ExprKind::Let` to represent if let guards.
|
|
r=compiler-errors
Don't synthesize host effect args inside trait object types
While we were indeed emitting an error for `~const` & `const` trait bounds in trait object types, we were still synthesizing host effect args for them.
Since we don't record the original trait bound modifiers for dyn-Trait in `hir::TyKind::TraitObject` (unlike we do for let's say impl-Trait, `hir::TyKind::OpaqueTy`), AstConv just assumes `ty::BoundConstness::NotConst` in `conv_object_ty_poly_trait_ref` which given `<host> dyn ~const NonConstTrait` resulted in us not realizing that `~const` was used on a non-const trait which lead to a failed assertion in the end.
Instead of updating `hir::TyKind::TraitObject` to track this kind of information, just strip the user-provided constness (similar to #119505).
Fixes #119524.
|
|
Don't synthesize host effect params for trait associated functions marked const
Fixes #113378.
r? fee1-dead or compiler
|
|
Deny defaults for higher-ranked generic parameters
Fixes #119489 (incl. https://github.com/rust-lang/rust/issues/119489#issuecomment-1873399208).
Partially reverts #119042.
cc ```@bvanjoi```
r? ```@compiler-errors``` or compiler
|
|
|
|
|
|
|
|
Don't drop a hir node after lowering
Fixes https://github.com/rust-lang/rust/issues/119271.
It seems that all hir nodes that get allocated an id must be placed within the hir on pain of ICEs. In https://github.com/rust-lang/rust/pull/118527 I dropped guards on never patterns since they're not useful, which caused the ICE.
|
