| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
I didn't figure out how to reach this condition with `expr` containing
`ExprKind::MacCall`. All the approaches I tried ended up with the macro
call ending up in the `StmtKind::MacCall` case below instead.
In any case, from visual inspection this is a bugfix. If we do end up
with a `StmtKind::Expr` containing `ExprKind::MacCall` with brace
delimiter, it would not need ";" printed after it.
|
|
|
|
This commit by itself is supposed to have no effect on behavior. All of
the call sites are updated to preserve their previous behavior.
The behavior changes are in the commits that follow.
|
|
For each of these, we need to decide whether they need to be using
`expr_requires_semi_to_be_stmt`, or `expr_requires_comma_to_be_match_arm`,
which are supposed to be 2 different behaviors. Previously they were
conflated into one, causing either too much or too little
parenthesization.
|
|
Remove braces when fixing a nested use tree into a single item
[Back in 2019](https://github.com/rust-lang/rust/pull/56645) I added rustfix support for the `unused_imports` lint, to automatically remove them when running `cargo fix`. For the most part this worked great, but when removing all but one childs of a nested use tree it turned `use foo::{Unused, Used}` into `use foo::{Used}`. This is slightly annoying, because it then requires you to run `rustfmt` to get `use foo::Used`.
This PR automatically removes braces and the surrouding whitespace when all but one child of a nested use tree are unused. To get it done I had to add the span of the nested use tree to the AST, and refactor a bit the code I wrote back then.
A thing I noticed is, there doesn't seem to be any `//@ run-rustfix` test for fixing the `unused_imports` lint. I created a test in `tests/suggestions` (is that the right directory?) that for now tests just what I added in the PR. I can followup in a separate PR to add more tests for fixing `unused_lints`.
This PR is best reviewed commit-by-commit.
|
|
|
|
Add StaticForeignItem and use it on ForeignItemKind
This is in preparation for unsafe extern blocks that adds a safe variant for functions inside extern blocks.
r? `@oli-obk`
cc `@compiler-errors`
|
|
|
|
Signed-off-by: Sasha Pourcelot <sasha.pourcelot@protonmail.com>
|
|
|
|
Required for being able to make the fields private and force the use of
accessor methods, which will be added in the next commit.
|
|
|
|
Qualifier tweaking
Adding and removing qualifiers in some cases that make things nicer. Details in individual commits.
r? `@compiler-errors`
|
|
Implement syntax for `impl Trait` to specify its captures explicitly (`feature(precise_capturing)`)
Implements `impl use<'a, 'b, T, U> Sized` syntax that allows users to explicitly list the captured parameters for an opaque, rather than inferring it from the opaque's bounds (or capturing *all* lifetimes under 2024-edition capture rules). This allows us to exclude some implicit captures, so this syntax may be used as a migration strategy for changes due to #117587.
We represent this list of captured params as `PreciseCapturingArg` in AST and HIR, resolving them between `rustc_resolve` and `resolve_bound_vars`. Later on, we validate that the opaques only capture the parameters in this list.
We artificially limit the feature to *require* mentioning all type and const parameters, since we don't currently have support for non-lifetime bivariant generics. This can be relaxed in the future.
We also may need to limit this to require naming *all* lifetime parameters for RPITIT, since GATs have no variance. I have to investigate this. This can also be relaxed in the future.
r? `@oli-obk`
Tracking issue:
- https://github.com/rust-lang/rust/issues/123432
|
|
In some cases `DUMMY_SP` is already imported. In other cases this commit
adds the necessary import, in files where `DUMMY_SP` is used more than
once.
|
|
Cleanup: Rename `ModSep` to `PathSep`
`::` is usually referred to as the *path separator* (citation needed).
The existing name `ModSep` for *module separator* is a bit misleading since it in fact separates the segments of arbitrary path segments, not only ones resolving to modules. Let me just give a shout-out to associated items (`T::Assoc`, `<Ty as Trait>::function`) and enum variants (`Option::None`).
Motivation: Reduce friction for new contributors, prevent potential confusion.
cc `@petrochenkov`
r? nnethercote or compiler
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Match ergonomics 2024: implement mutable by-reference bindings
Implements the mutable by-reference bindings portion of match ergonomics 2024 (#123076), with the `mut ref`/`mut ref mut` syntax, under feature gate `mut_ref`.
r? `@Nadrieril`
`@rustbot` label A-patterns A-edition-2024
|
|
Signed-off-by: xiaoxiangxianzi <zhaoyizheng@outlook.com>
|
|
|
|
Experimental feature postfix match
This has a basic experimental implementation for the RFC postfix match (rust-lang/rfcs#3295, #121618). [Liaison is](https://rust-lang.zulipchat.com/#narrow/stream/213817-t-lang/topic/Postfix.20Match.20Liaison/near/423301844) ```@scottmcm``` with the lang team's [experimental feature gate process](https://github.com/rust-lang/lang-team/blob/master/src/how_to/experiment.md).
This feature has had an RFC for a while, and there has been discussion on it for a while. It would probably be valuable to see it out in the field rather than continue discussing it. This feature also allows to see how popular postfix expressions like this are for the postfix macros RFC, as those will take more time to implement.
It is entirely implemented in the parser, so it should be relatively easy to remove if needed.
This PR is split in to 5 commits to ease review.
1. The implementation of the feature & gating.
2. Add a MatchKind field, fix uses, fix pretty.
3. Basic rustfmt impl, as rustfmt crashes upon seeing this syntax without a fix.
4. Add new MatchSource to HIR for Clippy & other HIR consumers
|
|
Stop using `box PAT` syntax for deref patterns, as it's misleading and
also causes their semantics being tangled up.
|
|
|
|
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
|
|
|
|
Move `gather_comments`.
To the module where it is used, so it doesn't have to be `pub`.
r? ```@est31```
|
|
To the module where it is used, so it doesn't have to be `pub`.
|
|
|
|
|
|
|
|
|
|
|
|
Add an ErrorGuaranteed to ast::TyKind::Err (attempt 2)
This makes it more like `hir::TyKind::Err`, and avoids a `has_errors` assertion in `LoweringContext::lower_ty_direct`.
r? ```@oli-obk```
|
|
This mostly works well, and eliminates a couple of delayed bugs.
One annoying thing is that we should really also add an
`ErrorGuaranteed` to `proc_macro::bridge::LitKind::Err`. But that's
difficult because `proc_macro` doesn't have access to `ErrorGuaranteed`,
so we have to fake it.
|
|
This makes it more like `hir::TyKind::Err`, and avoids a
`span_delayed_bug` call in `LoweringContext::lower_ty_direct`.
It also requires adding `ast::TyKind::Dummy`, now that
`ast::TyKind::Err` can't be used for that purpose in the absence of an
error emission.
There are a couple of cases that aren't as neat as I would have liked,
marked with `FIXME` comments.
|
|
|
|
|
|
There are a number of cases where we erroneously omit the space between
two tokens, all involving an exception to a more general case. The
affected tokens are `$`, `!`, `.`, `,`, and `let` followed by a
parenthesis.
This fixes a lot of FIXME comments.
|
|
This gives better output for code produced by proc macros.
|
|
|
|
|
|
Fix parenthesization of subexprs containing statement boundary
This PR fixes a multitude of false negatives and false positives in the AST pretty printer's parenthesis insertion related to statement boundaries — statements which terminate unexpectedly early if there aren't parentheses.
Without this fix, the AST pretty printer (including both `stringify!` and `rustc -Zunpretty=expanded`) is prone to producing output which is not syntactically valid Rust. Invalid output is problematic because it means Rustfmt is unable to parse the output of `cargo expand`, for example, causing friction by forcing someone trying to debug a macro into reading poorly formatted code.
I believe the set of bugs fixed in this PR account for the most prevalent reason that `cargo expand` produces invalid output in real-world usage.
Fixes #98790.
## False negatives
The following is a correct program — `cargo check` succeeds.
```rust
macro_rules! m {
($e:expr) => {
match () { _ => $e }
};
}
fn main() {
m!({ 1 } - 1);
}
```
But `rustc -Zunpretty=expanded main.rs` produces output that is invalid Rust syntax, because parenthesization is needed and not being done by the pretty printer.
```rust
fn main() { match () { _ => { 1 } - 1, }; }
```
Piping this expanded code to rustfmt, it fails to parse.
```console
error: unexpected `,` in pattern
--> <stdin>:1:38
|
1 | fn main() { match () { _ => { 1 } - 1, }; }
| ^
|
help: try adding parentheses to match on a tuple...
|
1 | fn main() { match () { _ => { 1 } (- 1,) }; }
| + +
help: ...or a vertical bar to match on multiple alternatives
|
1 | fn main() { match () { _ => { 1 } - 1 | }; }
| ~~~~~
```
Fixed output after this PR:
```rust
fn main() { match () { _ => ({ 1 }) - 1, }; }
```
## False positives
Less problematic, but worth fixing (just like #118726).
```rust
fn main() {
let _ = match () { _ => 1 } - 1;
}
```
Output of `rustc -Zunpretty=expanded lib.rs` before this PR. There is no reason parentheses would need to be inserted there.
```rust
fn main() { let _ = (match () { _ => 1, }) - 1; }
```
After this PR:
```rust
fn main() { let _ = match () { _ => 1, } - 1; }
```
## Alternatives considered
In this PR I opted to parenthesize only the leading subexpression causing the statement boundary, rather than the entire statement. Example:
```rust
macro_rules! m {
($e:expr) => {
$e
};
}
fn main() {
m!(loop { break [1]; }[0] - 1);
}
```
This PR produces the following pretty-printed contents for fn main:
```rust
(loop { break [1]; })[0] - 1;
```
A different equally correct output would be:
```rust
(loop { break [1]; }[0] - 1);
```
I chose the one I did because it is the *only* approach used by handwritten code in the standard library and compiler. There are 4 places where parenthesization is being used to prevent a statement boundary, and in all 4, the developer has chosen to parenthesize the smallest subexpression rather than the whole statement:
https://github.com/rust-lang/rust/blob/b37d43efd9c5a7a3d76ed21c454dd0f40945d77d/compiler/rustc_codegen_cranelift/example/alloc_system.rs#L102
https://github.com/rust-lang/rust/blob/b37d43efd9c5a7a3d76ed21c454dd0f40945d77d/compiler/rustc_parse/src/errors.rs#L1021-L1029
https://github.com/rust-lang/rust/blob/b37d43efd9c5a7a3d76ed21c454dd0f40945d77d/library/core/src/future/poll_fn.rs#L151
https://github.com/rust-lang/rust/blob/b37d43efd9c5a7a3d76ed21c454dd0f40945d77d/library/core/src/ops/range.rs#L824-L828
|
|
|
