| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Minor AST cleanups
r? ``@estebank``
|
|
It's a highly misleading name, because it's completely different to
`MetaItem::name_value_literal`. Specifically, it doesn't match
`MetaItemKind::NameValue` (e.g. `#[foo = 3]`), it matches
`MetaItemKind::List` (e.g. `#[foo(3)]`).
|
|
|
|
|
|
To match `derive(Diagnostic)`.
Also rename `into_diagnostic` as `into_diag`.
|
|
Currently it only checks calls to functions marked with
`#[rustc_lint_diagnostics]`. This commit changes it to check calls to
any function with an `impl Into<{D,Subd}iagMessage>` parameter. This
greatly improves its coverage and doesn't rely on people remembering to
add `#[rustc_lint_diagnostics]`.
The commit also adds `#[allow(rustc::untranslatable_diagnostic)`]
attributes to places that need it that are caught by the improved lint.
These places that might be easy to convert to translatable diagnostics.
Finally, it also:
- Expands and corrects some comments.
- Does some minor formatting improvements.
- Adds missing `DecorateLint` cases to
`tests/ui-fulldeps/internal-lints/diagnostics.rs`.
|
|
Not the dropping of the trailing `s` -- this type describes a single
diagnostic and its name should be singular.
|
|
`ParseSess` cleanups
The main change here is to rename all `ParseSess` values as `psess`. Plus a few other small cleanups.
r? `@wesleywiser`
|
|
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
|
|
|
|
|
|
Much better!
Note that this involves renaming (and updating the value of)
`DIAGNOSTIC_BUILDER` in clippy.
|
|
|
|
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
|
|
Error codes are integers, but `String` is used everywhere to represent
them. Gross!
This commit introduces `ErrCode`, an integral newtype for error codes,
replacing `String`. It also introduces a constant for every error code,
e.g. `E0123`, and removes the `error_code!` macro. The constants are
imported wherever used with `use rustc_errors::codes::*`.
With the old code, we have three different ways to specify an error code
at a use point:
```
error_code!(E0123) // macro call
struct_span_code_err!(dcx, span, E0123, "msg"); // bare ident arg to macro call
\#[diag(name, code = "E0123")] // string
struct Diag;
```
With the new code, they all use the `E0123` constant.
```
E0123 // constant
struct_span_code_err!(dcx, span, E0123, "msg"); // constant
\#[diag(name, code = E0123)] // constant
struct Diag;
```
The commit also changes the structure of the error code definitions:
- `rustc_error_codes` now just defines a higher-order macro listing the
used error codes and nothing else.
- Because that's now the only thing in the `rustc_error_codes` crate, I
moved it into the `lib.rs` file and removed the `error_codes.rs` file.
- `rustc_errors` uses that macro to define everything, e.g. the error
code constants and the `DIAGNOSTIC_TABLES`. This is in its new
`codes.rs` file.
|
|
|
|
|
|
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
|
|
For consistency with `warn`/`struct_warn`, and also `{create,emit}_err`,
all of which use an abbreviated form.
|
|
To avoid the use of a mutable local variable, and because it reads more
nicely.
|
|
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
|
|
Also add some `dcx` methods to types that wrap `TyCtxt`, for easier
access.
|
|
Also add missing `#[track_caller]` attributes to `DiagCtxt` methods as
necessary to keep tests working.
|
|
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
|
|
|
|
|
|
|
|
|
|
Because the corresponding `Level` is `DelayedBug` and `span_delayed_bug`
follows the pattern used everywhere else: `span_err`, `span_warning`,
etc.
|
|
|
|
Currently we always do this:
```
use rustc_fluent_macro::fluent_messages;
...
fluent_messages! { "./example.ftl" }
```
But there is no need, we can just do this everywhere:
```
rustc_fluent_macro::fluent_messages! { "./example.ftl" }
```
which is shorter.
|
|
The `fluent_messages!` macro produces uses of
`crate::{D,Subd}iagnosticMessage`, which means that every crate using
the macro must have this import:
```
use rustc_errors::{DiagnosticMessage, SubdiagnosticMessage};
```
This commit changes the macro to instead use
`rustc_errors::{D,Subd}iagnosticMessage`, which avoids the need for the
imports.
|
|
`x clippy compiler -Aclippy::all -Wclippy::needless_borrow --fix`.
Then I had to remove a few unnecessary parens and muts that were exposed
now.
|
|
|
|
Store #[deprecated] attribute's `since` value in parsed form
This PR implements the first followup bullet listed in https://github.com/rust-lang/rust/pull/117148#issue-1960240108.
We centralize error handling to the attribute parsing code in `compiler/rustc_attr/src/builtin.rs`, and thereby remove some awkward error codepaths from later phases of compilation that had to make sense of these #\[deprecated\] attributes, namely `compiler/rustc_passes/src/stability.rs` and `compiler/rustc_middle/src/middle/stability.rs`.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Sort dependencies and features sections.
- Add `tidy` markers to the sorted sections so they stay sorted.
- Remove empty `[lib`] sections.
- Remove "See more keys..." comments.
Excluded files:
- rustc_codegen_{cranelift,gcc}, because they're external.
- rustc_lexer, because it has external use.
- stable_mir, because it has external use.
|
|
|
|
|
|
|
|
The same file already contains another env!("CFG_RELEASE") on line 632,
so it's impossible for this crate to compile without CFG_RELEASE set.
|
|
|
|
|
