| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
`ErrorConstraintInfo`
`fr_is_local` was fully unused, and `outlived_fr_is_local` was used once
|
|
compiler-errors:resolve-regions-for-type-test-failure, r=BoxyUwU
Resolve named regions when reporting type test failures in NLL
Just a improvement tweak to an error message that I broke out of a bigger PR that I had to close lol
|
|
|
|
Rename rustc_middle::Ty::is_unsafe_ptr to is_raw_ptr
The wording unsafe pointer is less common and not mentioned in a lot of places, instead this is usually called a "raw pointer". For the sake of uniformity, we rename this method.
This came up during the review of
https://github.com/rust-lang/rust/pull/134424.
r? `@Noratrieb`
|
|
|
|
The wording unsafe pointer is less common and not mentioned in a lot of
places, instead this is usually called a "raw pointer". For the sake of
uniformity, we rename this method.
This came up during the review of
https://github.com/rust-lang/rust/pull/134424.
|
|
|
|
|
|
Ignore NLL boring locals in polonius diagnostics
Another easy one ``@jackh726`` (the diff is inflated by blessed test expectations don't worry :)
NLLs don't compute liveness for boring locals, and therefore cannot find them in causes explaining borrows. In polonius, we don't have this liveness optimization (we may be able to do something partially similar in the future, e.g. for function parameters and the like), so we do encounter these in diagnostics even though we don't want to. This PR:
- restructures the polonius context into per-phase data, in spirit as you requested in an earlier review
- stores the locals NLLs would consider boring into the errors/diagnostics data
- ignores these if a boring local is found when trying to explain borrows
This PR fixes around 80 cases of diagnostics differences between `-Zpolonius=next` and NLLs. I've also added explicit revisions to a few polonius tests (both for the in-tree implementation as well as the datalog implementation -- even if we'll eventually remove them). I didn't do this for all the "dead" expectations that were removed from #136112 for that same reason, it's fine. I'll soon/eventually add explicit revisions where they're needed: there's only a handful of tests left to fix.
r? ``@jackh726``
|
|
r=compiler-errors
diagnostics: fix borrowck suggestions for if/while let conditionals
This code detects the case where one of the borrows is inside the let init expr while the other end is not. If that happens, we don't want to suggest adding a semicolon, because it won't work.
Fixes #133941
|
|
Make comma separated lists of anything easier to make for errors
Provide a new function `listify`, meant to be used in cases similar to `pluralize!`. When you have a slice of arbitrary elements that need to be presented to the user, `listify` allows you to turn that into a list of comma separated strings.
This reduces a lot of redundant logic that happens often in diagnostics.
|
|
Rework "long type names" printing logic
Make it so more type-system types can be printed in a shortened version (like `Predicate`s).
Centralize printing the information about the "full type name path".
Make the "long type path" for the file where long types are written part of `Diag`, so that it becomes easier to keep track of it, and ensure it will always will be printed out last in the diagnostic by making its addition to the output implicit.
Tweak the shortening of types in "expected/found" labels.
Remove dead file `note.rs`.
|
|
This code detects the case where one of the borrows is inside the
let init expr while the other end is not. If that happens, we don't
want to suggest adding a semicolon, because it won't work.
|
|
Implement MIR lowering for unsafe binders
This is the final bit of the unsafe binders puzzle. It implements MIR, CTFE, and codegen for unsafe binders, and enforces that (for now) they are `Copy`. Later on, I'll introduce a new trait that relaxes this requirement to being "is `Copy` or `ManuallyDrop<T>`" which more closely models how we treat union fields.
Namely, wrapping unsafe binders is now `Rvalue::WrapUnsafeBinder`, which acts much like an `Rvalue::Aggregate`. Unwrapping unsafe binders are implemented as a MIR projection `ProjectionElem::UnwrapUnsafeBinder`, which acts much like `ProjectionElem::Field`.
Tracking:
- https://github.com/rust-lang/rust/issues/130516
|
|
Make it so more type-system types can be printed in a shortened version (like `Predicate`s).
Centralize printing the information about the "full type name path".
Make the "long type path" for the file where long types are written part of `Diag`, so that it becomes easier to keep track of it, and ensure it will always will be printed out last in the diagnostic by making its addition to the output implicit.
Tweak the shortening of types in "expected/found" labels.
Remove dead file `note.rs`.
|
|
Provide a new function `listify`, meant to be used in cases similar to `pluralize!`. When you have a slice of arbitrary elements that need to be presented to the user, `listify` allows you to turn that into a list of comma separated strings.
This reduces a lot of redundant logic that happens often in diagnostics.
|
|
|
|
this is used in diagnostics to focus on relevant live locals to match
NLL diagnostics
|
|
It's a function that does stuff with MIR and yet it weirdly has its own
module in `rustc_middle::util`. This commit moves it into
`rustc_middle::mir`, a more sensible home.
|
|
Tweak `&mut self` suggestion span
```
error[E0596]: cannot borrow `*self.s` as mutable, as it is behind a `&` reference
--> $DIR/issue-38147-1.rs:17:9
|
LL | self.s.push('x');
| ^^^^^^ `self` is a `&` reference, so the data it refers to cannot be borrowed as mutable
|
help: consider changing this to be a mutable reference
|
LL | fn f(&mut self) {
| +++
```
Note the suggestion to add `mut` instead of replacing the entire `&self` with `&mut self`.
|
|
```
error[E0596]: cannot borrow `*self.s` as mutable, as it is behind a `&` reference
--> $DIR/issue-38147-1.rs:17:9
|
LL | self.s.push('x');
| ^^^^^^ `self` is a `&` reference, so the data it refers to cannot be borrowed as mutable
|
help: consider changing this to be a mutable reference
|
LL | fn f(&mut self) {
| +++
```
Note the suggestion to add `mut` instead of replacing the entire `&self` with `&mut self`.
|
|
|
|
Use short ty string for move errors
```
error[E0382]: use of moved value: `x`
--> bay.rs:14:14
|
12 | fn foo(x: D) {
| - move occurs because `x` has type `(((..., ..., ..., ...), ..., ..., ...), ..., ..., ...)`, which does not implement the `Copy` trait
13 | let _a = x;
| - value moved here
14 | let _b = x; //~ ERROR use of moved value
| ^ value used here after move
|
= note: the full type name has been written to 'bay.long-type-14349227078439097973.txt'
= note: consider using `--verbose` to print the full type name to the console
help: consider cloning the value if the performance cost is acceptable
|
13 | let _a = x.clone();
| ++++++++
```
Address 4th case in #135919.
|
|
```
error[E0382]: use of moved value: `x`
--> bay.rs:14:14
|
12 | fn foo(x: D) {
| - move occurs because `x` has type `(((..., ..., ..., ...), ..., ..., ...), ..., ..., ...)`, which does not implement the `Copy` trait
13 | let _a = x;
| - value moved here
14 | let _b = x; //~ ERROR use of moved value
| ^ value used here after move
|
= note: the full type name has been written to 'bay.long-type-14349227078439097973.txt'
= note: consider using `--verbose` to print the full type name to the console
help: consider cloning the value if the performance cost is acceptable
|
13 | let _a = x.clone();
| ++++++++
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
`best_blame_constraint`: Blame better constraints when the region graph has cycles from invariance or `'static`
This fixes #132749 by changing which constraint is blamed for region errors in several cases. `best_blame_constraint` had a heuristic that tried to pinpoint the constraint causing an error by filtering out any constraints where the outliving region is unified with the ultimate target region being outlived. However, it used the SCCs of the region graph to do this, which is unreliable; in particular, if the target region is `'static`, or if there are cycles from the presence of invariant types, it was skipping over the constraints it should be blaming. As is the case in that issue, this could lead to confusing diagnostics. The simplest fix seems to work decently, judging by test stderr: this makes `best_blame_constraint` no longer filter constraints by their outliving region's SCC.
There are admittedly some quirks in the test output. In many cases, subdiagnostics that depend on the particular constraint being blamed have either started or stopped being emitted. After starting at this for quite a while, I think anything too fickle about whether it outputs based on the particular constraint being blamed should instead be looking at the constraint path as a whole, similar to what's done for [the placeholder-from-predicate note](https://github.com/rust-lang/rust/compare/master...dianne:rust:better-blame-constraints-for-static#diff-3c0de6462469af483c9ecdf2c4b00cb26192218ef2d5c62a0fde75107a74caaeR506).
Very many tests involving invariant types gained a note pointing out the types' invariance, but in a few cases it was lost. A particularly illustrative example is [tests/ui/lifetimes/copy_modulo_regions.stderr](https://github.com/rust-lang/rust/compare/master...dianne:rust:better-blame-constraints-for-static?expand=1#diff-96e1f8b29789b3c4ce2f77a5e0fba248829b97ef9d1ce39e7d2b4aa57b2cf4f0); I'd argue the new constraint is a better one to blame, but it lacks the variance diagnostic information that's elsewhere in the constraint path. If desired, I can try making that note check the whole path rather than just the blamed constraint.
The subdiagnostic [`BorrowExplanation::add_object_lifetime_default_note`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_borrowck/diagnostics/explain_borrow/enum.BorrowExplanation.html#method.add_object_lifetime_default_note) depends on a `Cast` being blamed, so [a special case](https://github.com/rust-lang/rust/pull/133858/commits/364ca7f99c12fb5220e6b568ac391979317ce878) was necessary to keep it from disappearing from tests specifically testing for it. However, see the FIXME comment in that commit; I think the special case should be removed once that subdiagnostic works properly, but it's nontrivial enough to warrant a separate PR. Incidentally, this removes the note from a test where it was being added erroneously: in [tests/ui/borrowck/two-phase-surprise-no-conflict.stderr](https://github.com/rust-lang/rust/compare/master...dianne:rust:better-blame-constraints-for-static?expand=1#diff-8cf085af8203677de6575a45458c9e6b03412a927df879412adec7e4f7ff5e14), the object lifetime is explicitly provided and it's not `'static`.
|
|
Convert typeck constraints in location-sensitive polonius
In this PR, we do a big chunk of the work of localizing regular outlives constraints.
The slightly annoying thing is handling effectful statements: usually the subset graph propagates loans at a single point between regions, and liveness propagates loans between points within a single region, but some statements have effects applied on exit.
This was also a problem before, in datalog polonius terms and Niko's solution at the time, this is about: the mid-point. The idea was to duplicate all MIR locations into two physical points, and orchestrate the effects with that. Somewhat easier to do, but double the CFG.
We've always believed we didn't _need_ midpoints in principle, as we can represent changes on exit as on happening entry to the successor, but there's some difficulty in tracking the position information at sufficient granularity through outlives relation (especially since we also have bidirectional edges and time-traveling now).
Now, that is surely what we should be doing in the future. In the mean time, I infer this from the kind of statement/terminator where an outlives constraint arose. It's not particularly complicated but some explanation will help clarify the code.
Assignments (in their various forms) are the quintessential example of these crossover cases: loans that would flow into the LHS would not be visible on entry to the point but on exit -- so we'll localize these edges to the successor. Let's look at a real-world example, involving invariance for bidirectional edges:
```rust
let mut _1: HashMap<i32, &'7 i32>;
let mut _3: &'9 mut HashMap<i32, &'10 i32>;
...
/* at bb1[3]: */ _3 = &'3 mut _1;
```
Here, typeck expectedly produces 3 outlives constraints today:
1. `'3 -> '9`
2. `'7 -> '10`
3. `'10 -> '7`
And we localize them like so,
1. `'3 -> '9` flows into the LHS and becomes: `3_bb1_3 -> 9_bb1_4`
2. `'7 -> '10` flows into the LHS and becomes: `7_bb1_3 -> 10_bb1_4`
3. `'10 -> '7` flows from the LHS and becomes: `10_bb1_4 -> 7_bb1_3` (time traveling 👌)
---
r? ``@jackh726``
To keep you entertained during the holidays I also threw in a couple of small changes removing cruft in the borrow checker.
We're actually getting there. The next PR will be the last one needed to get end-to-end tests working.
|
|
|
|
|
|
|
|
|
|
|
|
`ExtraConstraintInfo` was used only for a single subdiagnostic, so this moves the logic for that
to its own function and eliminates the indirection. In order to do so cleanly, this also changes
the arguments to `BorrowExplanation::add_explanation_to_diagnostic`, which happens to simplify its
call sites.
|
|
It's not really necessary
|
|
|
|
|
|
this is to remove the entire `util` module
|
|
Some small nits to the borrowck suggestions for mutating a map through index
1. Suggesting users to either use `.insert` or `.get_mut` (which do totally different things) can be a bit of a footgun, so let's make that a bit more nuanced.
2. I find the suggestion of `.get_mut(|val| { *val = whatever; })` to be a bit awkward. I changed this to be an if-let instead.
3. Fix a bug which was suppressing the structured suggestion for some mutations via the index operator on `HashMap`/`BTreeMap`.
r? estebank or reassign
|
|
borrowck diagnostics: make `add_move_error_suggestions` use the HIR rather than `SourceMap`
This PR aims to fix #132806 by rewriting `add_move_error_suggestions`[^1]. Previously, it manually scanned the source text to find a leading `&`, which isn't always going to produce a correct result (see: that issue). Admittedly, the HIR visitor in this PR introduces a lot of boilerplate, but hopefully the logic at its core isn't too complicated (I go over it in the comments). I also tried a simpler version that didn't use a HIR visitor and suggested adding `ref` always, but the `&ref x` suggestions really didn't look good. As a bonus for the added complexity though, it's now able to produce nice `&`-removing suggestions in more cases.
I tried to do this such that it avoids edition-dependent checks and its suggestions can be applied together with those from the match ergonomics 2024 migration lint. I haven't added tests for that since the details of match ergonomics 2024 are still being sorted out, but I can try if desired once that's finalized.
[^1]: In brief, it fires on patterns where users try to bind by-value in such a way that moves out of a reference to a non-Copy type (including slice references with non-copy elements). The suggestions are to change the binding's mode to be by-reference, either by removing[^2] an enclosing `&`/`&mut` or adding `ref` to the binding.
[^2]: Incidentally, I find the terminology of "consider removing the borrow" a bit confusing for a suggestion to remove a `&` pattern in order to make bindings borrow rather than move. I'm not sure what a good, concise way to explain that would be though, and that should go in a separate PR anyway.
|
|
|
|
|
