| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Allows disabling `fmt::Debug` derive and debug formatting.
|
|
error messages
|
|
Add `#[warn(unreachable_pub)]` to a bunch of compiler crates
By default `unreachable_pub` identifies things that need not be `pub` and tells you to make them `pub(crate)`. But sometimes those things don't need any kind of visibility. So they way I did these was to remove the visibility entirely for each thing the lint identifies, and then add `pub(crate)` back in everywhere the compiler said it was necessary. (Or occasionally `pub(super)` when context suggested that was appropriate.) Tedious, but results in more `pub` removal.
There are plenty more crates to do but this seems like enough for a first PR.
r? `@compiler-errors`
|
|
Stabilize `unsafe_attributes`
# Stabilization report
## Summary
This is a tracking issue for the RFC 3325: unsafe attributes
We are stabilizing `#![feature(unsafe_attributes)]`, which makes certain attributes considered 'unsafe', meaning that they must be surrounded by an `unsafe(...)`, as in `#[unsafe(no_mangle)]`.
RFC: rust-lang/rfcs#3325
Tracking issue: #123757
## What is stabilized
### Summary of stabilization
Certain attributes will now be designated as unsafe attributes, namely, `no_mangle`, `export_name`, and `link_section` (stable only), and these attributes will need to be called by surrounding them in `unsafe(...)` syntax. On editions prior to 2024, this is simply an edition lint, but it will become a hard error in 2024. This also works in `cfg_attr`, but `unsafe` is not allowed for any other attributes, including proc-macros ones.
```rust
#[unsafe(no_mangle)]
fn a() {}
#[cfg_attr(any(), unsafe(export_name = "c"))]
fn b() {}
```
For a table showing the attributes that were considered to be included in the list to require unsafe, and subsequent reasoning about why each such attribute was or was not included, see [this comment here](https://github.com/rust-lang/rust/pull/124214#issuecomment-2124753464)
## Tests
The relevant tests are in `tests/ui/rust-2024/unsafe-attributes` and `tests/ui/attributes/unsafe`.
|
|
|
|
This lets us compare a `Token` with a `TokenKind`. It's used a lot, but
can be used even more, avoiding the need for some `.kind` uses.
|
|
Use more slice patterns inside the compiler
Nothing super noteworthy. Just replacing the common 'fragile' pattern of "length check followed by indexing or unwrap" with slice patterns for legibility and 'robustness'.
r? ghost
|
|
|
|
|
|
|
|
r=nnethercote
built-in derive: remove BYTE_SLICE_IN_PACKED_STRUCT_WITH_DERIVE hack and lint
Fixes https://github.com/rust-lang/rust/issues/107457 by turning the lint into a hard error. The lint has been shown in future breakage reports since Rust 1.69 (released in April 2023).
Let's see (via crater) if enough time has passed since https://github.com/rust-lang/rust/pull/104429, and https://github.com/unicode-org/icu4x/pull/2834 has propagated far enough to let us make this a hard error.
Cc ``@nnethercote`` ``@Manishearth``
|
|
improve error message when `global_asm!` uses `asm!` operands
follow-up to https://github.com/rust-lang/rust/pull/128207
what was
```
error: expected expression, found keyword `in`
--> src/lib.rs:1:31
|
1 | core::arch::global_asm!("{}", in(reg));
| ^^ expected expression
```
becomes
```
error: the `in` operand cannot be used with `global_asm!`
--> $DIR/parse-error.rs:150:19
|
LL | global_asm!("{}", in(reg));
| ^^ the `in` operand is not meaningful for global-scoped inline assembly, remove it
```
the span of the error is just the keyword, which means that we can't create a machine-applicable suggestion here. The alternative would be to attempt to parse the full operand, but then if there are syntax errors in the operand those would be presented to the user, even though the parser already knows that the output won't be valid. Also that would require more complexity in the parser.
So I think this is a nice improvement at very low cost.
|
|
chore: use shorthand initializer
Tiny readability improvement - don't use redundant initializer vars
|
|
Still more `cfg` cleanups
Found while looking closely at `cfg`/`cfg_attr` processing code.
r? `````````@petrochenkov`````````
|
|
|
|
r=estebank,traviscross
More unsafe attr verification
This code denies unsafe on attributes such as `#[test]` and `#[ignore]`, while also changing the `MetaItem` parsing so `unsafe` in args like `#[allow(unsafe(dead_code))]` is not accidentally allowed.
Tracking:
- https://github.com/rust-lang/rust/issues/123757
|
|
When collecting tokens there are two kinds of range:
- a range relative to the parser's full token stream (which we get when
we are parsing);
- a range relative to a single AST node's token stream (which we use
within `LazyAttrTokenStreamImpl` when replacing tokens).
These are currently both represented with `Range<u32>` and it's easy to
mix them up -- until now I hadn't properly understood the difference.
This commit introduces `ParserRange` and `NodeRange` to distinguish
them. This also requires splitting `ReplaceRange` in two, giving the new
types `ParserReplacement` and `NodeReplacement`. (These latter two names
reduce the overloading of the word "range".)
The commit also rewrites some comments to be clearer.
The end result is a little more verbose, but much clearer.
|
|
|
|
derive(SmartPointer): rewrite bounds in where and generic bounds
Fix #127647
Due to the `Unsize` bounds, we need to commute the bounds on the pointee type to the new self type.
cc ```@Darksonn```
|
|
This makes it possible for the `unsafe(...)` syntax to only be
valid at the top level, and the `NestedMetaItem`s will automatically
reject `unsafe(...)`.
|
|
Mark `Parser::eat`/`check` methods as `#[must_use]`
These methods return a `bool`, but we probably should either use these values or explicitly throw them away (e.g. when we just want to unconditionally eat a token if it exists).
I changed a few places from `eat` to `expect`, but otherwise I tried to leave a comment explaining why the `eat` was okay.
This also adds a test for the `pattern_type!` macro, which used to silently accept a missing `is` token.
|
|
|
|
Bump bootstrap compiler to new beta
https://forge.rust-lang.org/release/process.html#master-bootstrap-update-t-2-day-tuesday
|
|
|
|
|
|
The previous commit updated `rustfmt.toml` appropriately. This commit is
the outcome of running `x fmt --all` with the new formatting options.
|
|
|
|
|
|
`#[naked]`: report incompatible attributes
tracking issue: https://github.com/rust-lang/rust/issues/90957
this is a re-implementation of https://github.com/rust-lang/rust/pull/93809 by ``@bstrie`` which was closed 2 years ago due to inactivity.
This PR takes some of the final comments into account, specifically providing a little more context in error messages, and using an allow list to determine which attributes are compatible with `#[naked]`.
Notable attributes that are incompatible with `#[naked]` are:
* `#[inline]`
* `#[track_caller]`
* ~~`#[target_feature]`~~ (this is now allowed, see PR discussion)
* `#[test]`, `#[ignore]`, `#[should_panic]`
These attributes just directly conflict with what `#[naked]` should do.
Naked functions are still important for systems programming, embedded, and operating systems, so I'd like to move them forward.
|
|
improve error message when `global_asm!` uses `asm!` options
specifically, what was
error: expected one of `)`, `att_syntax`, or `raw`, found `preserves_flags`
--> $DIR/bad-options.rs:45:25
|
LL | global_asm!("", options(preserves_flags));
| ^^^^^^^^^^^^^^^ expected one of `)`, `att_syntax`, or `raw`
is now
error: the `preserves_flags` option cannot be used with `global_asm!`
--> $DIR/bad-options.rs:45:25
|
LL | global_asm!("", options(preserves_flags));
| ^^^^^^^^^^^^^^^ the `preserves_flags` option is not meaningful for global-scoped inline assembly
mirroring the phrasing of the [reference](https://doc.rust-lang.org/reference/inline-assembly.html#options).
This is also a bit of a refactor for a future `naked_asm!` macro (for use in `#[naked]` functions). Currently this sort of error can come up when switching from inline to global asm, or when a user just isn't that experienced with assembly. With `naked_asm!` added to the mix hitting this error is more likely.
|
|
|
|
- merge error codes
- use attribute name that is incompatible in error message
- add test for conditional incompatible attribute
- add `linkage` to the allowlist
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
function, just like with immutable visitors
|
|
|
|
r=compiler-errors
Forbid borrows and unsized types from being used as the type of a const generic under `adt_const_params`
Fixes #112219
Fixes #112124
Fixes #112125
### Motivation
Currently the `adt_const_params` feature allows writing `Foo<const N: [u8]>` this is entirely useless as it is not possible to write an expression which evaluates to a type that is not `Sized`. In order to actually use unsized types in const generics they are typically written as `const N: &[u8]` which *is* possible to provide a value of.
Unfortunately allowing the types of const parameters to contain references is non trivial (#120961) as it introduces a number of difficult questions about how equality of references in the type system should behave. References in the types of const generics is largely only useful for using unsized types in const generics.
This PR introduces a new feature gate `unsized_const_parameters` and moves support for `const N: [u8]` and `const N: &...` from `adt_const_params` into it. The goal here hopefully is to experiment with allowing `const N: [u8]` to work without references and then eventually completely forbid references in const generics.
Splitting this out into a new feature gate means that stabilization of `adt_const_params` does not have to resolve #120961 which is the only remaining "big" blocker for the feature. Remaining issues after this are a few ICEs and naming bikeshed for `ConstParamTy`.
### Implementation
The implementation is slightly subtle here as we would like to ensure that a stabilization of `adt_const_params` is forwards compatible with any outcome of `unsized_const_parameters`. This is inherently tricky as we do not support unstable trait implementations and we determine whether a type is valid as the type of a const parameter via a trait bound.
There are a few constraints here:
- We would like to *allow for the possibility* of adding a `Sized` supertrait to `ConstParamTy` in the event that we wind up opting to not support unsized types and instead requiring people to write the 'sized version', e.g. `const N: [u8; M]` instead of `const N: [u8]`.
- Crates should be able to enable `unsized_const_parameters` and write trait implementations of `ConstParamTy` for `!Sized` types without downstream crates that only enable `adt_const_params` being able to observe this (required for std to be able to `impl<T> ConstParamTy for [T]`
Ultimately the way this is accomplished is via having two traits (sad), `ConstParamTy` and `UnsizedConstParamTy`. Depending on whether `unsized_const_parameters` is enabled or not we change which trait is used to check whether a type is allowed to be a const parameter.
Long term (when stabilizing `UnsizedConstParamTy`) it should be possible to completely merge these traits (and derive macros), only having a single `trait ConstParamTy` and `macro ConstParamTy`.
Under `adt_const_params` it is now illegal to directly refer to `ConstParamTy` it is only used as an internal impl detail by `derive(ConstParamTy)` and checking const parameters are well formed. This is necessary in order to ensure forwards compatibility with all possible future directions for `feature(unsized_const_parameters)`.
Generally the intuition here should be that `ConstParamTy` is the stable trait that everything uses, and `UnsizedConstParamTy` is that plus unstable implementations (well, I suppose `ConstParamTy` isn't stable yet :P).
|
|
Instead of a `bool`. Because `ForceCollect` is used in this way
everywhere else.
|
|
|
|
|
|
Attribute cleanups
More refactoring done while trying to fix the final remaining test failure for #124141.
r? `@petrochenkov`
|
|
- `AttributesData` -> `AttrsTarget`
- `AttrTokenTree::Attributes` -> `AttrTokenTree::AttrsTarget`
- `FlatToken::AttrTarget` -> `FlatToken::AttrsTarget`
|
|
|
|
Reject SmartPointer constructions not serving the purpose
Tracking issue: #123430
With this PR we will reject a row of malformed `SmartPointer` implementor candidates.
cc `@Darksonn` `@davidtwco` for context.
|
