| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
|
|
|
|
Manually cleanup token stream when macro expansion aborts.
In case of syntax error in macro expansion, the expansion code can decide to stop processing anything. In that case, the token stream is malformed. This makes downstream users, like derive macros, ICE.
In this case, this PR manually cleans up the token stream by closing all currently open delimiters.
Fixes https://github.com/rust-lang/rust/issues/96818.
Fixes https://github.com/rust-lang/rust/issues/80447.
Fixes https://github.com/rust-lang/rust/issues/81920.
Fixes https://github.com/rust-lang/rust/issues/91023.
|
|
|
|
On later stages, the feature is already stable.
Result of running:
rg -l "feature.let_else" compiler/ src/librustdoc/ library/ | xargs sed -s -i "s#\\[feature.let_else#\\[cfg_attr\\(bootstrap, feature\\(let_else\\)#"
|
|
|
|
|
|
These two type names are long and have long matching prefixes. I find
them hard to read, especially in combinations like
`AttrAnnotatedTokenStream::new(vec![AttrAnnotatedTokenTree::Token(..)])`.
This commit renames them as `AttrToken{Stream,Tree}`.
|
|
`Default` bounds
|
|
|
|
by module
|
|
Recently, another Miri user was trying to run `cargo miri test` on the
crate `iced-x86` with `--features=code_asm,mvex`. This configuration has
a startup time of ~18 minutes. That's ~18 minutes before any tests even
start to run. The fact that this crate has over 26,000 tests and Miri is
slow makes a lot of code which is otherwise a bit sloppy but fine into a
huge runtime issue.
Sorting the tests when the test harness is created instead of at startup
time knocks just under 4 minutes out of those ~18 minutes. I have ways
to remove most of the rest of the startup time, but this change requires
coordinating changes of both the compiler and libtest, so I'm sending it
separately.
|
|
Replace `rustc_data_structures::thin_vec::ThinVec` with `thin_vec::ThinVec`
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
r? `@spastorino`
|
|
Revert let_chains stabilization
This is the revert against master, the beta revert was already done in #100538.
Bumps the stage0 compiler which already has it reverted.
|
|
This reverts commit 326646074940222d602f3683d0559088690830f4.
This is the revert against master, the beta revert was already done in #100538.
|
|
Separate CountIsStar from CountIsParam in rustc_parse_format.
`rustc_parse_format`'s parser would result in the exact same output for `{:.*}` and `{:.0$}`, making it hard for diagnostics to handle these cases properly.
This splits those cases by adding a new `CountIsStar` enum variant.
This fixes #100995
Prerequisite for https://github.com/rust-lang/rust/pull/100996
|
|
`rustc_data_structures::thin_vec::ThinVec` looks like this:
```
pub struct ThinVec<T>(Option<Box<Vec<T>>>);
```
It's just a zero word if the vector is empty, but requires two
allocations if it is non-empty. So it's only usable in cases where the
vector is empty most of the time.
This commit removes it in favour of `thin_vec::ThinVec`, which is also
word-sized, but stores the length and capacity in the same allocation as
the elements. It's good in a wider variety of situation, e.g. in enum
variants where the vector is usually/always non-empty.
The commit also:
- Sorts some `Cargo.toml` dependency lists, to make additions easier.
- Sorts some `use` item lists, to make additions easier.
- Changes `clean_trait_ref_with_bindings` to take a
`ThinVec<TypeBinding>` rather than a `&[TypeBinding]`, because this
avoid some unnecessary allocations.
|
|
Avoid cloning a collection only to iterate over it
`@rustbot` label: +C-cleanup
|
|
|
|
r=petrochenkov
Minor `ast::LitKind` improvements
r? `@petrochenkov`
|
|
Fix rustc_parse_format precision & width spans
When a `precision`/`width` was `CountIsName - {:name$}` or `CountIs - {:10}` the `precision_span`/`width_span` was set to `None`
For `width` the name span in `CountIsName(_, name_span)` had its `.start` off by one
r? ``@fee1-dead`` / cc ``@PrestonFrom`` since this is similar to #99987
|
|
Because it's never used meaningfully.
|
|
Migrate rustc_ast_passes diagnostics to `SessionDiagnostic` and translatable messages (first part)
Doing a full migration of the `rustc_ast_passes` crate.
Making a draft here since there's not yet a tracking issue for the migrations going on.
`@rustbot` label +A-translation
|
|
In some places we use `Vec<Attribute>` and some places we use
`ThinVec<Attribute>` (a.k.a. `AttrVec`). This results in various points
where we have to convert between `Vec` and `ThinVec`.
This commit changes the places that use `Vec<Attribute>` to use
`AttrVec`. A lot of this is mechanical and boring, but there are
some interesting parts:
- It adds a few new methods to `ThinVec`.
- It implements `MapInPlace` for `ThinVec`, and introduces a macro to
avoid the repetition of this trait for `Vec`, `SmallVec`, and
`ThinVec`.
Overall, it makes the code a little nicer, and has little effect on
performance. But it is a precursor to removing
`rustc_data_structures::thin_vec::ThinVec` and replacing it with
`thin_vec::ThinVec`, which is implemented more efficiently.
|
|
|
|
|
|
|
|
|
|
Box the `MacCall` in various types.
r? `@spastorino`
|
|
Don't derive `PartialEq::ne`.
Currently we skip deriving `PartialEq::ne` for C-like (fieldless) enums
and empty structs, thus reyling on the default `ne`. This behaviour is
unnecessarily conservative, because the `PartialEq` docs say this:
> Implementations must ensure that eq and ne are consistent with each other:
>
> `a != b` if and only if `!(a == b)` (ensured by the default
> implementation).
This means that the default implementation (`!(a == b)`) is always good
enough. So this commit changes things such that `ne` is never derived.
The motivation for this change is that not deriving `ne` reduces compile
times and binary sizes.
Observable behaviour may change if a user has defined a type `A` with an
inconsistent `PartialEq` and then defines a type `B` that contains an
`A` and also derives `PartialEq`. Such code is already buggy and
preserving bug-for-bug compatibility isn't necessary.
Two side-effects of the change:
- There is only one error message produced for types where `PartialEq`
cannot be derived, instead of two.
- For coverage reports, some warnings about generated `ne` methods not
being executed have disappeared.
Both side-effects seem fine, and possibly preferable.
|
|
Attribute cleanups
r? `@ghost`
|
|
Clean up `LitKind`
r? ``@petrochenkov``
|
|
Because it's always empty.
|
|
Because it's always empty.
|
|
|
|
- Rename `ast::Lit::token` as `ast::Lit::token_lit`, because its type is
`token::Lit`, which is not a token. (This has been confusing me for a
long time.)
reasonable because we have an `ast::token::Lit` inside an `ast::Lit`.
- Rename `LitKind::{from,to}_lit_token` as
`LitKind::{from,to}_token_lit`, to match the above change and
`token::Lit`.
|
|
These fields are unused.
|
|
By using `expr_str` more and adding `expr_{char,byte_str}`.
|
|
Simplify format_args builtin macro implementation.
Instead of a FxHashMap<Symbol, (usize, Span)> for the named arguments, this now includes the name and span in the elements of the Vec<FormatArg> directly. The FxHashMap still exists to look up the index, but no longer contains the span. Looking up the name or span of an argument is now trivial and does not need the map anymore.
|
|
|
|
|
|
Simplify visitors
By removing some unused arguments.
r? `@cjgillot`
|
|
It is passed an argument that is never used.
|
|
|
|
|
|
Instead of a FxHashMap<Symbol, (usize, Span)> for the named arguments,
this now includes the name and span in the elements of the
Vec<FormatArg> directly. The FxHashMap still exists to look up the
index, but no longer contains the span. Looking up the name or span of
an argument is now trivial and does not need the map anymore.
|
|
TaKO8Ki:suggest-positional-formatting-argument-instead-of-format-args-capture, r=estebank
Suggest a positional formatting argument instead of a captured argument
This patch fixes a part of #96999.
fixes #98241
fixes #97311
r? `@estebank`
|
|
|
