| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This commit updates rustc, with an applicable LLVM version, to use
LLVM's new `llvm.fpto{u,s}i.sat.*.*` intrinsics to implement saturating
floating-point-to-int conversions. This results in a little bit tighter
codegen for x86/x86_64, but the main purpose of this is to prepare for
upcoming changes to the WebAssembly backend in LLVM where wasm's
saturating float-to-int instructions will now be implemented with these
intrinsics.
This change allows simplifying a good deal of surrounding code, namely
removing a lot of wasm-specific behavior. WebAssembly no longer has any
special-casing of saturating arithmetic instructions and the need for
`fptoint_may_trap` is gone and all handling code for that is now
removed. This means that the only wasm-specific logic is in the
`fpto{s,u}i` instructions which only get used for "out of bounds is
undefined behavior". This does mean that for the WebAssembly target
specifically the Rust compiler will no longer be 100% compatible with
pre-LLVM 12 versions, but it seems like that's unlikely to be relied on
by too many folks.
Note that this change does immediately regress the codegen of saturating
float-to-int casts on WebAssembly due to the specialization of the LLVM
intrinsic not being present in our LLVM fork just yet. I'll be following
up with an LLVM update to pull in those patches, but affects a few other
SIMD things in flight for WebAssembly so I wanted to separate this change.
Eventually the entire `cast_float_to_int` function can be removed when
LLVM 12 is the minimum version, but that will require sinking the
complexity of it into other backends such as Cranelfit.
|
|
Update the minimum external LLVM to 10
r? `@nikic`
|
|
|
|
Adjusted LLVM codegen for code compiled with `-Zinstrument-coverage` to
address multiple, somewhat related issues.
Fixed a significant flaw in prior coverage solution: Every counter
generated a new counter variable, but there should have only been one
counter variable per function. This appears to have bloated .profraw
files significantly. (For a small program, it increased the size by
about 40%. I have not tested large programs, but there is anecdotal
evidence that profraw files were way too large. This is a good fix,
regardless, but hopefully it also addresses related issues.
Fixes: #82144
Invalid LLVM coverage data produced when compiled with -C opt-level=1
Existing tests now work up to at least `opt-level=3`. This required a
detailed analysis of the LLVM IR, comparisons with Clang C++ LLVM IR
when compiled with coverage, and a lot of trial and error with codegen
adjustments.
The biggest hurdle was figuring out how to continue to support coverage
results for unused functions and generics. Rust's coverage results have
three advantages over Clang's coverage results:
1. Rust's coverage map does not include any overlapping code regions,
making coverage counting unambiguous.
2. Rust generates coverage results (showing zero counts) for all unused
functions, including generics. (Clang does not generate coverage for
uninstantiated template functions.)
3. Rust's unused functions produce minimal stubbed functions in LLVM IR,
sufficient for including in the coverage results; while Clang must
generate the complete LLVM IR for each unused function, even though
it will never be called.
This PR removes the previous hack of attempting to inject coverage into
some other existing function instance, and generates dedicated instances
for each unused function. This change, and a few other adjustments
(similar to what is required for `-C link-dead-code`, but with lower
impact), makes it possible to support LLVM optimizations.
Fixes: #79651
Coverage report: "Unexecuted instantiation:..." for a generic function
from multiple crates
Fixed by removing the aforementioned hack. Some "Unexecuted
instantiation" notices are unavoidable, as explained in the
`used_crate.rs` test, but `-Zinstrument-coverage` has new options to
back off support for either unused generics, or all unused functions,
which avoids the notice, at the cost of less coverage of unused
functions.
Fixes: #82875
Invalid LLVM coverage data produced with crate brotli_decompressor
Fixed by disabling the LLVM function attribute that forces inlining, if
`-Z instrument-coverage` is enabled. This attribute is applied to
Rust functions with `#[inline(always)], and in some cases, the forced
inlining breaks coverage instrumentation and reports.
|
|
This patch avoids undefined behavior by linking different object files.
Also this would it could be propagated properly to LTO.
See https://reviews.llvm.org/D52322 and https://reviews.llvm.org/D52323.
This patch is based on https://github.com/rust-lang/rust/pull/74002
|
|
|
|
|
|
Improve SIMD type element count validation
Resolves rust-lang/stdsimd#53.
These changes are motivated by `stdsimd` moving in the direction of const generic vectors, e.g.:
```rust
#[repr(simd)]
struct SimdF32<const N: usize>([f32; N]);
```
This makes a few changes:
* Establishes a maximum SIMD lane count of 2^16 (65536). This value is arbitrary, but attempts to validate lane count before hitting potential errors in the backend. It's not clear what LLVM's maximum lane count is, but cranelift's appears to be much less than `usize::MAX`, at least.
* Expands some SIMD intrinsics to support arbitrary lane counts. This resolves the ICE in the linked issue.
* Attempts to catch invalid-sized vectors during typeck when possible.
Unresolved questions:
* Generic-length vectors can't be validated in typeck and are only validated after monomorphization while computing layout. This "works", but the errors simply bail out with no context beyond the name of the type. Should these errors instead return `LayoutError` or otherwise provide context in some way? As it stands, users of `stdsimd` could trivially produce monomorphization errors by making zero-length vectors.
cc `@bjorn3`
|
|
|
|
|
|
SIMD vector lengths.
|
|
The function was only used in LLVM 8 compatibility code
and was found and flagged by dead code detection and now removed.
|
|
This commit grepped for LLVM_VERSION_GE, LLVM_VERSION_LT, get_major_version and
min-llvm-version and statically evaluated every expression possible
(and sensible) assuming that the LLVM version is >=9 now
|
|
with an eye on merging `TargetOptions` into `Target`.
`TargetOptions` as a separate structure is mostly an implementation detail of `Target` construction, all its fields logically belong to `Target` and available from `Target` through `Deref` impls.
|
|
|
|
Addresses Issue #78286
Libraries compiled with coverage and linked with out enabling coverage
would fail when attempting to add the library's coverage statements to
the codegen coverage context (None).
Now, if coverage statements are encountered while compiling / linking
with `-Z instrument-coverage` disabled, codegen will *not* attempt to
add code regions to a coverage map, and it will not inject the LLVM
instrprof_increment intrinsic calls.
|
|
Preparation for a subsequent change that replaces
rustc_target::config::Config with its wrapped Target.
On its own, this commit breaks the build. I don't like making
build-breaking commits, but in this instance I believe that it
makes review easier, as the "real" changes of this PR can be
seen much more easily.
Result of running:
find compiler/ -type f -exec sed -i -e 's/target\.target\([)\.,; ]\)/target\1/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target\.target$/target/g' {} \;
find compiler/ -type f -exec sed -i -e 's/target.ptr_width/target.pointer_width/g' {} \;
./x.py fmt
|
|
Pass tune-cpu to LLVM
I think this is how it should work...
See https://internals.rust-lang.org/t/expose-tune-cpu-from-llvm/13088 for the background. Or the documentation diff.
|
|
I think this is how it should work...
|
|
|
|
|
