| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
|
|
It's only has a single remaining purpose: to ensure that a diagnostic is
printed when `trimmed_def_paths` is used. It's an annoying mechanism:
weak, with odd semantics, badly named, and gets in the way of other
changes.
This commit replaces it with a simpler `must_produce_diag` mechanism,
getting rid of a diagnostic `Level` along the way.
|
|
Invert diagnostic lints.
That is, change `diagnostic_outside_of_impl` and `untranslatable_diagnostic` from `allow` to `deny`, because more than half of the compiler has been converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow` attributes, which proves that this change is warranted.
r? ````@davidtwco````
|
|
That is, change `diagnostic_outside_of_impl` and
`untranslatable_diagnostic` from `allow` to `deny`, because more than
half of the compiler has be converted to use translated diagnostics.
This commit removes more `deny` attributes than it adds `allow`
attributes, which proves that this change is warranted.
|
|
The two kinds of delayed bug have quite different semantics so a
stronger conceptual separation is nice. (`is_error` is a good example,
because the two kinds have different behaviour.)
The commit also moves the `DelayedBug` variant after `Error` in `Level`,
to reflect the fact that it's weaker than `Error` -- it might trigger an
error but also might not. (The pre-existing `downgrade_to_delayed_bug`
function also reflects the notion that delayed bugs are lower/after
normal errors.)
Plus it condenses some of the comments on `Level` into a table, for
easier reading, and introduces `can_be_top_or_sub` to indicate which
levels can be used in top-level diagnostics vs. subdiagnostics.
Finally, it renames `DiagCtxtInner::span_delayed_bugs` as
`DiagCtxtInner::delayed_bugs`. The `span_` prefix is unnecessary because
some delayed bugs don't have a span.
|
|
|
|
It's empty, and it doesn't even make sense, because
`rustc_error_messages` is a lower-level crate than `rustc_errors`.
|
|
|
|
c6e6ecb1afea9695a42d0f148ce153536b279eb5 added it to some of the
compiler's crates, but avoided adding it to all of them to reduce
bit-rot. This commit adds to more.
|
|
|
|
It lints against features that are inteded to be internal to the
compiler and standard library. Implements MCP #596.
We allow `internal_features` in the standard library and compiler as those
use many features and this _is_ the standard library from the "internal to the compiler and
standard library" after all.
Marking some features as internal wasn't exactly the most scientific approach, I just marked some
mostly obvious features. While there is a categorization in the macro,
it's not very well upheld (should probably be fixed in another PR).
We always pass `-Ainternal_features` in the testsuite
About 400 UI tests and several other tests use internal features.
Instead of throwing the attribute on each one, just always allow them.
There's nothing wrong with testing internal features^^
|
|
|
|
During borrowck, the `MultiSpan` from a buffered diagnostic is cloned and
used to emit a delayed bug indicating a diagnostic was buffered - when
the buffered diagnostic is translated, then the cloned `MultiSpan` may
contain labels which can only render with the diagnostic's arguments, but
the delayed bug being emitted won't have those arguments. Adds a function
which clones `MultiSpan` without also cloning the contained labels, and
use this function when creating the buffered diagnostic delayed bug.
Signed-off-by: David Wood <david@davidtw.co>
|
|
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic
handler will also write the contents of the backtrace to disk. If any
`delay_span_bug`s are encountered, their backtrace is also added to the
file. The platform and rustc version will also be collected.
|
|
hidden types for them
|
|
|
|
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most
compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl
From<&'static str>`, which involves a bunch of knock-on changes that
require/result in call sites being a little more precise about exactly
what kind of string they use to create errors, and not just `&str`. This
will result in fewer unnecessary allocations, though this will not have
any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to
preserve the existing string imprecision. I could have used `impl
Into<{D,Subd}iagnosticMessage>` in various places as is done in the
compiler, but that would have required changes to *many* call sites
(mostly changing `&format("...")` to `format!("...")`) which didn't seem
worthwhile.
|
|
|
|
|
|
Currently a `{D,Subd}iagnosticMessage` can be created from any type that
impls `Into<String>`. That includes `&str`, `String`, and `Cow<'static,
str>`, which are reasonable. It also includes `&String`, which is pretty
weird, and results in many places making unnecessary allocations for
patterns like this:
```
self.fatal(&format!(...))
```
This creates a string with `format!`, takes a reference, passes the
reference to `fatal`, which does an `into()`, which clones the
reference, doing a second allocation. Two allocations for a single
string, bleh.
This commit changes the `From` impls so that you can only create a
`{D,Subd}iagnosticMessage` from `&str`, `String`, or `Cow<'static,
str>`. This requires changing all the places that currently create one
from a `&String`. Most of these are of the `&format!(...)` form
described above; each one removes an unnecessary static `&`, plus an
allocation when executed. There are also a few places where the existing
use of `&String` was more reasonable; these now just use `clone()` at
the call site.
As well as making the code nicer and more efficient, this is a step
towards possibly using `Cow<'static, str>` in
`{D,Subd}iagnosticMessage::{Str,Eager}`. That would require changing
the `From<&'a str>` impls to `From<&'static str>`, which is doable, but
I'm not yet sure if it's worthwhile.
|
|
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
|
|
Move items not part of this stabilization to 'lazy_cell' or 'once_cell_try'
|
|
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
|
|
|
|
Extend `CodegenBackend` trait with a function returning the translation
resources from the codegen backend, which can be added to the complete
list of resources provided to the emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
Most tests involving save-analysis were removed, but I kept a few where
the `-Zsave-analysis` was an add-on to the main thing being tested,
rather than the main thing being tested.
For `x.py install`, the `rust-analysis` target has been removed.
For `x.py dist`, the `rust-analysis` target has been kept in a
degenerate form: it just produces a single file `reduced.json`
indicating that save-analysis has been removed. This is necessary for
rustup to keep working.
Closes #43606.
|
|
Migrate the `rustc_incremental` crate's diagnostics to translatable
diagnostic structs.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
|
|
rustc: Remove needless lifetimes
|
|
Give a more helpful error for "trimmed_def_paths constructed"
cc https://rust-lang.zulipchat.com/#narrow/stream/122651-general/topic/ice.20debugging/near/315928294, https://github.com/rust-lang/rust/pull/106056
`@mejrs` do you think this would have helped you figure out the problem faster?
|
|
|
|
|
|
|
|
|
|
|
|
Add a detailed note for missing comma typo w/ FRU syntax
Thanks to `@pierwill` for working on this with me!
Fixes #104373, perhaps `@alice-i-cecile` can comment on the new error for the example provided on that issue -- feedback is welcome.
```
error[E0063]: missing field `defaulted` in initializer of `Outer`
--> $DIR/multi-line-fru-suggestion.rs:14:5
|
LL | Outer {
| ^^^^^ missing `defaulted`
|
note: this expression may have been misinterpreted as a `..` range expression
--> $DIR/multi-line-fru-suggestion.rs:16:16
|
LL | inner: Inner {
| ________________^
LL | | a: 1,
LL | | b: 2,
LL | | }
| |_________^ this expression does not end in a comma...
LL | ..Default::default()
| ^^^^^^^^^^^^^^^^^^^^ ... so this is interpreted as a `..` range expression, instead of functional record update syntax
help: to set the remaining fields from `Default::default()`, separate the last named field with a comma
|
LL | },
| +
error: aborting due to previous error
For more information about this error, try `rustc --explain E0063`.
```
|
|
Rollup of 8 pull requests
Successful merges:
- #102977 (remove HRTB from `[T]::is_sorted_by{,_key}`)
- #103378 (Fix mod_inv termination for the last iteration)
- #103456 (`unchecked_{shl|shr}` should use `u32` as the RHS)
- #103701 (Simplify some pointer method implementations)
- #104047 (Diagnostics `icu4x` based list formatting.)
- #104338 (Enforce that `dyn*` coercions are actually pointer-sized)
- #104498 (Edit docs for `rustc_errors::Handler::stash_diagnostic`)
- #104556 (rustdoc: use `code-header` class to format enum variants)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
|
|
|
|
|
|
implement binding_shadows
migrate till self-in-generic-param-default
use braces in fluent message as suggested by @compiler-errors.
to fix lock file issue reported by CI
migrate 'unreachable label' error
run formatter
name the variables correctly in fluent file
SessionDiagnostic -> Diagnostic
test "pattern/pat-tuple-field-count-cross.rs" passed
test "resolve/bad-env-capture2.rs" passed
test "enum/enum-in-scope.rs" and other depended on "resolve_binding_shadows_something_unacceptable" should be passed now.
fix crash errors while running test-suite. there might be more.
then_some(..) suits better here.
all tests passed
convert TraitImpl and InvalidAsm. TraitImpl is buggy yet. will fix after receiving help from Zulip
migrate "Ralative-2018"
migrate "ancestor only"
migrate "expected found"
migrate "Indeterminate"
migrate "module only"
revert to the older implementation for now. since this is failing at the moment.
follow the convension for fluent variable
order the diag attribute as suggested in review comment
fix merge error. migrate trait-impl-duplicate
make the changes compatible with "Flatten diagnostic slug modules #103345"
fix merge
remove commented code
merge issues
fix review comments
fix tests
|
|
Display help message when fluent arg was referenced incorrectly
The fluent argument syntax is a little special and easy to get wrong, so we emit a small help message when someone gets it wrong.
Example:
```
parser_mismatched_closing_delimiter = mismatched closing delimiter: `${delimiter}`
```
panics with
```
thread 'rustc' panicked at 'Encountered errors while formatting message for `parser_mismatched_closing_delimiter`
help: Argument `delimiter` exists but was not referenced correctly. Try using `{$delimiter}` instead
attr: `None`
args: `FluentArgs([("delimiter", String("}"))])`
errors: `[ResolverError(Reference(Message { id: "delimiter", attribute: None }))]`', compiler/rustc_errors/src/translation.rs:123:21
```
fixes #103539
|
|
The fluent argument syntax is a little special and easy to get wrong, so
we emit a small help message when someone gets it wrong.
Example:
```
parser_mismatched_closing_delimiter = mismatched closing delimiter: `${delimiter}`
```
panics with
```
thread 'rustc' panicked at 'Encountered errors while formatting message for `parser_mismatched_closing_delimiter`
help: Argument `delimiter` exists but was not referenced correctly. Try using `{$delimiter}` instead
attr: `None`
args: `FluentArgs([("delimiter", String("}"))])`
errors: `[ResolverError(Reference(Message { id: "delimiter", attribute: None }))]`', compiler/rustc_errors/src/translation.rs:123:21
```
|
|
|
|
This way we comply with the Coherence rule given that IntoDiagnostic trait is defined in rustc_errors, and almost all other crates depend on it.
|
|
Enforce alphabetical sorting with tidy
We have many places where things are supposed to be sorted alphabetically. For the smaller and more recent size assertions, this is mostly upheld, but in other more... alive places it's very messy.
This introduces a new tidy directive to check that a section of code is sorted alphabetically and fixes all places where sorting has gone wrong.
|
|
translation: eager translation
Part of #100717. See [Zulip thread](https://rust-lang.zulipchat.com/#narrow/stream/336883-i18n/topic/.23100717.20lists!/near/295010720) for additional context.
- **Store diagnostic arguments in a `HashMap`**: Eager translation will enable subdiagnostics to be translated multiple times with different arguments - this requires the ability to replace the value of one argument with a new value, which is better suited to a `HashMap` than the previous storage, a `Vec`.
- **Add `AddToDiagnostic::add_to_diagnostic_with`**: `AddToDiagnostic::add_to_diagnostic_with` is similar to the previous `AddToDiagnostic::add_to_diagnostic` but takes a function that can be used by the caller to modify diagnostic messages originating from the subdiagnostic (such as performing translation eagerly). `add_to_diagnostic` now just calls `add_to_diagnostic_with` with an empty closure.
- **Add `DiagnosticMessage::Eager`**: Add variant of `DiagnosticMessage` for eagerly translated messages
(messages in the target language which don't need translated by the emitter during emission). Also adds `eager_subdiagnostic` function which is intended to be invoked by the diagnostic derive for subdiagnostic fields which are marked as needing eager translation.
- **Support `#[subdiagnostic(eager)]`**: Add support for `eager` argument to the `subdiagnostic` attribute which generates a call to `eager_subdiagnostic`.
- **Finish migrating `rustc_query_system`**: Using eager translation, migrate the remaining repeated cycle stack diagnostic.
- **Split formatting initialization and use in diagnostic derives**: Diagnostic derives have previously had to take special care when ordering the generated code so that fields were not used after a move.
This is unlikely for most fields because a field is either annotated with a subdiagnostic attribute and is thus likely a `Span` and copiable, or is a argument, in which case it is only used once by `set_arg`
anyway.
However, format strings for code in suggestions can result in fields being used after being moved if not ordered carefully. As a result, the derive currently puts `set_arg` calls last (just before emission), such as:
let diag = { /* create diagnostic */ };
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
format!("{}", __binding_0),
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.emit();
For eager translation, this doesn't work, as the message being translated eagerly can assume that all arguments are available - so arguments _must_ be set first.
Format strings for suggestion code are now separated into two parts - an initialization line that performs the formatting into a variable, and a usage in the subdiagnostic addition.
By separating these parts, the initialization can happen before arguments are set, preserving the desired order so that code compiles, while still enabling arguments to be set before subdiagnostics are added.
let diag = { /* create diagnostic */ };
let __code_0 = format!("{}", __binding_0);
/* + other formatting */
diag.set_arg("foo", __binding_0);
/* + other `set_arg` calls */
diag.span_suggestion_with_style(
span,
fluent::crate::slug,
__code_0,
Applicability::Unknown,
SuggestionStyle::ShowAlways
);
/* + other subdiagnostic additions */
diag.emit();
- **Remove field ordering logic in diagnostic derive:** Following the approach taken in earlier commits to separate formatting initialization from use in the subdiagnostic derive, simplify the diagnostic derive by removing the field-ordering logic that previously solved this problem.
r? ```@compiler-errors```
|
