| Age | Commit message (Collapse) | Author | Lines |
|---|
|
expand: Leave traces when expanding `cfg` attributes
This is the same as https://github.com/rust-lang/rust/pull/138515, but for `cfg(true)` instead of `cfg_attr`.
The difference is that `cfg(true)`s already left "traces" after themselves - the `cfg` attributes themselves, with `expanded_inert_attrs` set to true, with full tokens, available to proc macros.
This is not a reasonably expected behavior, but it could not be removed without a replacement, because a [major rustdoc feature](https://github.com/rust-lang/rfcs/pull/3631) and a number of clippy lints rely on it. This PR implements a replacement.
This needs a crater run, because it changes observable behavior (in an intended way) - proc macros can no longer see expanded `cfg(true)` attributes.
(Some minor unnecessary special casing for `sym::cfg_attr` is also removed in this PR.)
r? `@nnethercote`
|
|
|
|
r=compiler-errors
Mostly parser: Eliminate code that's been dead / semi-dead since the removal of type ascription syntax
**Disclaimer**: This PR is intended to mostly clean up code as opposed to bringing about behavioral changes. Therefore it doesn't aim to address any of the 'FIXME: remove after a month [dated: 2023-05-02]: "type ascription syntax has been removed, see issue [#]101728"'.
---
By commit:
1. Removes truly dead code:
* Since 1.71 (#109128) `let _ = { f: x };` is a syntax error as opposed to a semantic error which allows the parse-time diagnostic (suggestion) "*struct literal body without path // you might have forgotten […]*" to kick in.
* The analysis-time diagnostic (suggestion) from <=1.70 "*cannot find value \`f\` in this scope // you might have forgotten […]*" is therefore no longer reachable.
2. Updates `is_certainly_not_a_block` to be in line with the current grammar:
* The seq. `{ ident:` is definitely not the start of a block. Before the removal of ty ascr, `{ ident: ty_start` would begin a block expr.
* This shouldn't make more code compile IINM, it should *ultimately* only affect diagnostics.
* For example, `if T { f: () } {}` will now be interpreted as an `if` with struct lit `T { f: () }` as its *condition* (which is banned in the parser anyway) as opposed to just `T` (with the *consequent* being `f : ()` which is also invalid (since 1.71)). The diagnostics are almost the same because we have two separate parse recovery procedures + diagnostics: `StructLiteralNeedingParens` (*invalid struct lit*) before and `StructLiteralNotAllowedHere` (*struct lits aren't allowed here*) now, as you can see from the diff.
* (As an aside, even before this PR, fn `maybe_suggest_struct_literal` should've just used the much older & clearer `StructLiteralNotAllowedHere`)
* NB: This does sadly regress the compiler output for `tests/ui/parser/type-ascription-in-pattern.rs` but that can be fixed in follow-up PRs. It's not super important IMO and a natural consequence.
3. Removes code that's become dead due to the prior commit.
* Basically reverts #106620 + #112475 (without regressing rustc's output!).
* Now the older & more robust parse recovery procedure (cc `StructLiteralNotAllowedHere`) takes care of the cases the removed code used to handle.
* This automatically fixes the suggestions for \[[playground](https://play.rust-lang.org/?version=stable&mode=debug&edition=2024&gist=7e2030163b11ee96d17adc3325b01780)\]:
* `if Ty::<i32> { f: K }.m() {}`: `if Ty::<i32> { SomeStruct { f: K } }.m() {}` (broken) → ` if (Ty::<i32> { f: K }).m() {}`
* `if <T as Trait>::Out { f: K::<> }.m() {}`: `if <T as Trait>(::Out { f: K::<> }).m() {}` (broken) → `if (<T as Trait>::Out { f: K::<> }).m() {}`
4. Merge and simplify UI tests pertaining to this issue, so it's easier to add more regression tests like for the two cases mentioned above.
5. Merge UI tests and add the two regression tests.
Best reviewed commit by commit (on request I'll partially squash after approval).
|
|
Allow defining opaques in statics and consts
r? oli-obk
Fixes https://github.com/rust-lang/rust/issues/138902
|
|
|
|
|
|
Since `{ ident: ident }` is a parse error, these fields are dead.
|
|
|
|
expand: Leave traces when expanding `cfg_attr` attributes
Currently `cfg_trace` just disappears during expansion, but after this PR `#[cfg_attr(some tokens)]` will leave a `#[cfg_attr_trace(some tokens)]` attribute instead of itself in AST after expansion (the new attribute is built-in and inert, its inner tokens are the same as in the original attribute).
This trace attribute can then be used by lints or other diagnostics, #133823 has some examples.
Tokens in these trace attributes are set to an empty token stream, so the traces are non-existent for proc macros and cannot affect any user-observable behavior.
This is also a weakness, because if a proc macro processes some code with the trace attributes, they will be lost, so the traces are best effort rather than precise.
The next step is to do the same thing with `cfg` attributes (`#[cfg(TRUE)]` currently remains in both AST and tokens after expanding, it should be replaced with a trace instead).
The idea belongs to `@estebank.`
|
|
This removes E0773 "A builtin-macro was defined more than once."
|
|
|
|
|
|
For macros that are implemented on the compiler, we do *not* mention the `-Zmacro-backtrace` flag. This includes `derive`s and standard macros.
|
|
Rollup of 7 pull requests
Successful merges:
- #137314 (change definitely unproductive cycles to error)
- #137701 (Convert `ShardedHashMap` to use `hashbrown::HashTable`)
- #138269 (uefi: fs: Implement FileType, FilePermissions and FileAttr)
- #138331 (Use `RUSTC_LINT_FLAGS` more)
- #138345 (Some autodiff cleanups)
- #138387 (intrinsics: remove unnecessary leading underscore from argument names)
- #138390 (fix incorrect tracing log)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
r=onur-ozkan,jieyouxu
Use `RUSTC_LINT_FLAGS` more
An alternative to the failed #138084.
Fixes #138106.
r? ````@jieyouxu````
|
|
Remove `NtItem` and `NtStmt`
Another piece of #124141.
r? `@petrochenkov`
|
|
The idea is to identify cases of symbols/identifiers that are not
expected to be used. There isn't a perfectly sharp line between "dummy"
and "not dummy", but I think it's useful nonetheless.
|
|
Add `#[define_opaques]` attribute and require it for all type-alias-impl-trait sites that register a hidden type
Instead of relying on the signature of items to decide whether they are constraining an opaque type, the opaque types that the item constrains must be explicitly listed.
A previous version of this PR used an actual attribute, but had to keep the resolved `DefId`s in a side table.
Now we just lower to fields in the AST that have no surface syntax, instead a builtin attribute macro fills in those fields where applicable.
Note that for convenience referencing opaque types in associated types from associated methods on the same impl will not require an attribute. If that causes problems `#[defines()]` can be used to overwrite the default of searching for opaques in the signature.
One wart of this design is that closures and static items do not have generics. So since I stored the opaques in the generics of functions, consts and methods, I would need to add a custom field to closures and statics to track this information. During a T-types discussion we decided to just not do this for now.
fixes #131298
|
|
|
|
It's no longer necessary now that `-Wunreachable_pub` is being passed.
|
|
Revert <https://github.com/rust-lang/rust/pull/138084> to buy time to
consider options that avoids breaking downstream usages of cargo on
distributed `rustc-src` artifacts, where such cargo invocations fail due
to inability to inherit `lints` from workspace root manifest's
`workspace.lints` (this is only valid for the source rust-lang/rust
workspace, but not really the distributed `rustc-src` artifacts).
This breakage was reported in
<https://github.com/rust-lang/rust/issues/138304>.
This reverts commit 48caf81484b50dca5a5cebb614899a3df81ca898, reversing
changes made to c6662879b27f5161e95f39395e3c9513a7b97028.
|
|
(Except for `rustc_codegen_cranelift`.)
It's no longer necessary now that `unreachable_pub` is in the workspace
lints.
|
|
This time when converting them to proc-macro `Group` form.
|
|
This involves replacing `nt_pretty_printing_compatibility_hack` with
`stream_pretty_printing_compatibility_hack`.
The handling of statements in `transcribe` is slightly different to
other nonterminal kinds, due to the lack of `from_ast` implementation
for empty statements.
Notable test changes:
- `tests/ui/proc-macro/expand-to-derive.rs`: the diff looks large but
the only difference is the insertion of a single invisible-delimited
group around a metavar.
|
|
Rollup of 12 pull requests
Successful merges:
- #135767 (Future incompatibility warning `unsupported_fn_ptr_calling_conventions`: Also warn in dependencies)
- #137852 (Remove layouting dead code for non-array SIMD types.)
- #137863 (Fix pretty printing of unsafe binders)
- #137882 (do not build additional stage on compiler paths)
- #137894 (Revert "store ScalarPair via memset when one side is undef and the other side can be memset")
- #137902 (Make `ast::TokenKind` more like `lexer::TokenKind`)
- #137921 (Subtree update of `rust-analyzer`)
- #137922 (A few cleanups after the removal of `cfg(not(parallel))`)
- #137939 (fix order on shl impl)
- #137946 (Fix docker run-local docs)
- #137955 (Always allow rustdoc-json tests to contain long lines)
- #137958 (triagebot.toml: Don't label `test/rustdoc-json` as A-rustdoc-search)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
For consistency with `rustc_lexer::TokenKind::Bang`, and because other
`ast::TokenKind` variants generally have syntactic names instead of
semantic names (e.g. `Star` and `DotDot` instead of `Mul` and `Range`).
|
|
`BinOpToken` is badly named, because it only covers the assignable
binary ops and excludes comparisons and `&&`/`||`. Its use in
`ast::TokenKind` does allow a small amount of code sharing, but it's a
clumsy factoring.
This commit removes `ast::TokenKind::BinOp{,Eq}`, replacing each one
with 10 individual variants. This makes `ast::TokenKind` more similar to
`rustc_lexer::TokenKind`, which has individual variants for all
operators.
Although the number of lines of code increases, the number of chars
decreases due to the frequent use of shorter names like `token::Plus`
instead of `token::BinOp(BinOpToken::Plus)`.
|
|
|
|
|
|
Note: there was an existing code path involving `Interpolated` in
`MetaItem::from_tokens` that was dead. This commit transfers that to the
new form, but puts an `unreachable!` call inside it.
|
|
The one notable test change is `tests/ui/macros/trace_faulty_macros.rs`.
This commit removes the complicated `Interpolated` handling in
`expected_expression_found` that results in a longer error message. But
I think the new, shorter message is actually an improvement.
The original complaint was in #71039, when the error message started
with "error: expected expression, found `1 + 1`". That was confusing
because `1 + 1` is an expression. Other than that, the reporter said
"the whole error message is not too bad if you ignore the first line".
Subsequently, extra complexity and wording was added to the error
message. But I don't think the extra wording actually helps all that
much. In particular, it still says of the `1+1` that "this is expected
to be expression". This repeats the problem from the original complaint!
This commit removes the extra complexity, reverting to a simpler error
message. This is primarily because the traversal is a pain without
`Interpolated` tokens. Nonetheless, I think the error message is
*improved*. It now starts with "expected expression, found `pat`
metavariable", which is much clearer and the real problem. It also
doesn't say anything specific about `1+1`, which is good, because the
`1+1` isn't really relevant to the error -- it's the `$e:pat` that's
important.
|
|
note: compiler compiles but librustdoc and clippy don't
|
|
|
|
Use `edition = "2024"` in the compiler (redux)
Most of this is binding mode changes, which I fixed by running `x.py fix`.
Also adds some miscellaneous `unsafe` blocks for new unsafe standard library functions (the setenv ones), and a missing `unsafe extern` block in some enzyme codegen code, and fixes some precise capturing lifetime changes (but only when they led to errors).
cc ``@ehuss`` ``@traviscross``
|
|
|
|
|
|
|
|
Notes about tests:
- tests/ui/parser/macro/trait-object-macro-matcher.rs: the syntax error
is duplicated, because it occurs now when parsing the decl macro
input, and also when parsing the expanded decl macro. But this won't
show up for normal users due to error de-duplication.
- tests/ui/associated-consts/issue-93835.rs: similar, plus there are
some additional errors about this very broken code.
- The changes to metavariable descriptions in #132629 are now visible in
error message for several tests.
|
|
We now use invisible delimiters for expanded `vis` fragments, instead of
`Token::Interpolated`.
|
|
|
|
r=compiler-errors
Introduce CoercePointeeWellformed for coherence checks at typeck stage
Fix #135206
This is the first PR to introduce the "wellformedness" check for `derive(CoercePointee)`.
This patch introduces a new error code to cover all the prerequisites of the said macro. The checks that is enforced with this patch is whether the data is indeed `struct` and whether the layout is set to `repr(transparent)`.
A following series of patch will arrive later to address the following concern.
1. #135217 so that we would only admit one single coercion on one type parameter, and leave the rest for future consideration in tandem of development of other coercion rules.
1. Enforcement of data field requirements.
**An open question** is whether there is a good schema to encode the `#[pointee]` as well, so that we could also check if the `#[pointee]` type parameter is indeed `?Sized`.
``@rustbot`` label F-derive_coerce_pointee
|
|
|
|
|
|
|
|
Properly record metavar spans for other expansions other than TT
This properly records metavar spans for nonterminals other than tokentree. This means that we operations like `span.to(other_span)` work correctly for macros. As you can see, other diagnostics involving metavars have improved as a result.
Fixes #132908
Alternative to #133270
cc `@ehuss`
cc `@petrochenkov`
|
|
|
|
Add a list of symbols for stable standard library crates
There are a few locations where the crate name is checked against an enumerated list of `std`, `core`, `alloc`, and `proc_macro`, or some subset thereof. In most cases when we are looking for any "standard library" crate, all four crates should be treated the same. Change this so the crates are listed in one place, and that list is used wherever a list of `std` crates is needed.
`test` could be considered relevant in some of these cases, but generally treating it separate from the others seems preferable while it is unstable.
There are also a few places that Clippy will be able to use this.
|
|
There are a few locations where the crate name is checked against an
enumerated list of `std`, `core`, `alloc`, and `proc_macro`, or some
subset thereof. In most of these cases, all four crates should likely be
treated the same. Change this so the crates are listed in one place, and
that list is used wherever a list of `std` crates is needed.
`test` could be considered relevant in some of these cases, but
generally treating it separate from the others seems preferable while it
is unstable.
There are also a few places that Clippy will be able to use this.
|
|
|
|
[macro_metavar_expr_concat] Fix #128346
Fix #128346
Fix #131393
The syntax is invalid in both issues so I guess that theoretically the compiler should have aborted early.
This PR tries to fix a local problem but let me know if there are better options.
cc `@petrochenkov` if you are interested
|
