| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Align `Term` methods with `GenericArg` methods, add `Term::expect_*`
* `Term::ty` -> `Term::as_type`.
* `Term::ct` -> `Term::as_const`.
* Adds `Term::expect_type` and `Term::expect_const`, and uses them in favor of `.ty().unwrap()`, etc.
I could also shorten these to `as_ty` and then do `GenericArg::as_ty` as well, but I do think the `as_` is important to signal that this is a conversion method, and not a getter, like `Const::ty` is.
r? types
|
|
Make `WHERE_CLAUSES_OBJECT_SAFETY` a regular object safety violation
#### The issue
In #50781, we have known about unsound `where` clauses in function arguments:
```rust
trait Impossible {}
trait Foo {
fn impossible(&self)
where
Self: Impossible;
}
impl Foo for &() {
fn impossible(&self)
where
Self: Impossible,
{}
}
// `where` clause satisfied for the object, meaning that the function now *looks* callable.
impl Impossible for dyn Foo {}
fn main() {
let x: &dyn Foo = &&();
x.impossible();
}
```
... which currently segfaults at runtime because we try to call a method in the vtable that doesn't exist. :(
#### What did u change
This PR removes the `WHERE_CLAUSES_OBJECT_SAFETY` lint and instead makes it a regular object safety violation. I choose to make this into a hard error immediately rather than a `deny` because of the time that has passed since this lint was authored, and the single (1) regression (see below).
That means that it's OK to mention `where Self: Trait` where clauses in your trait, but making such a trait into a `dyn Trait` object will report an object safety violation just like `where Self: Sized`, etc.
```rust
trait Impossible {}
trait Foo {
fn impossible(&self)
where
Self: Impossible; // <~ This definition is valid, just not object-safe.
}
impl Foo for &() {
fn impossible(&self)
where
Self: Impossible,
{}
}
fn main() {
let x: &dyn Foo = &&(); // <~ THIS is where we emit an error.
}
```
#### Regressions
From a recent crater run, there's only one crate that relies on this behavior: https://github.com/rust-lang/rust/pull/124305#issuecomment-2122381740. The crate looks unmaintained and there seems to be no dependents.
#### Further
We may later choose to relax this (e.g. when the where clause is implied by the supertraits of the trait or something), but this is not something I propose to do in this FCP.
For example, given:
```
trait Tr {
fn f(&self) where Self: Blanket;
}
impl<T: ?Sized> Blanket for T {}
```
Proving that some placeholder `S` implements `S: Blanket` would be sufficient to prove that the same (blanket) impl applies for both `Concerete: Blanket` and `dyn Trait: Blanket`.
Repeating here that I don't think we need to implement this behavior right now.
----
r? lcnr
|
|
|
|
|
|
|
|
|
|
|
|
Implement `needs_async_drop` in rustc and optimize async drop glue
This PR expands on #121801 and implements `Ty::needs_async_drop` which works almost exactly the same as `Ty::needs_drop`, which is needed for #123948.
Also made compiler's async drop code to look more like compiler's regular drop code, which enabled me to write an optimization where types which do not use `AsyncDrop` can simply forward async drop glue to `drop_in_place`. This made size of the async block from the [async_drop test](https://github.com/zetanumbers/rust/blob/67980dd6fb11917d23d01a19c2cf4cfc3978aac8/tests/ui/async-await/async-drop.rs) to decrease by 12%.
|
|
|
|
Almost all callers want this anyway, and now we can use it to also return fed bodies
|
|
call
|
|
|
|
|
|
|
|
|
|
Uplift `EarlyBinder` into `rustc_type_ir`
We also need to give `EarlyBinder` a `'tcx` param, so that we can carry the `Interner` in the `EarlyBinder` too. This is necessary because otherwise we have an unconstrained `I: Interner` parameter in many of the `EarlyBinder`'s inherent impls.
I also generally think that this is desirable to have, in case we later want to track some state in the `EarlyBinder`.
r? lcnr
|
|
[perf] Delay the construction of early lint diag structs
Attacks some of the perf regressions from https://github.com/rust-lang/rust/pull/124417#issuecomment-2123700666.
See individual commits for details. The first three commits are not strictly necessary.
However, the 2nd one (06bc4fc67145e3a7be9b5a2cf2b5968cef36e587, *Remove `LintDiagnostic::msg`*) makes the main change way nicer to implement.
It's also pretty sweet on its own if I may say so myself.
|
|
Remove `DefId` from `EarlyParamRegion`
Currently we represent usages of `Region` parameters via the `ReEarlyParam` or `ReLateParam` variants. The `ReEarlyParam` is effectively equivalent to `TyKind::Param` and `ConstKind::Param` (i.e. it stores a `Symbol` and a `u32` index) however it also stores a `DefId` for the definition of the lifetime parameter.
This was used in roughly two places:
- Borrowck diagnostics instead of threading the appropriate `body_id` down to relevant locations. Interestingly there were already some places that had to pass down a `DefId` manually.
- Some opaque type checking logic was using the `DefId` field to track captured lifetimes
I've split this PR up into a commit for generate rote changes to diagnostics code to pass around a `DefId` manually everywhere, and another commit for the opaque type related changes which likely require more careful review as they might change the semantics of lints/errors.
Instead of manually passing the `DefId` around everywhere I previously tried to bundle it in with `TypeErrCtxt` but ran into issues with some call sites of `infcx.err_ctxt` being unable to provide a `DefId`, particularly places involved with trait solving and normalization. It might be worth investigating adding some new wrapper type to pass this around everywhere but I think this might be acceptable for now.
This pr also has the effect of reducing the size of `EarlyParamRegion` from 16 bytes -> 8 bytes. I wouldn't expect this to have any direct performance improvement however, other variants of `RegionKind` over `8` bytes are all because they contain a `BoundRegionKind` which is, as far as I know, mostly there for diagnostics. If we're ever able to remove this it would shrink the `RegionKind` type from `24` bytes to `12` (and with clever bit packing we might be able to get it to `8` bytes). I am curious what the performance impact would be of removing interning of `Region`'s if we ever manage to shrink `RegionKind` that much.
Sidenote: by removing the `DefId` the `Debug` output for `Region` has gotten significantly nicer. As an example see this opaque type debug print before vs after this PR:
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), [DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0, T, DefId(0:9 ~ impl_trait_captures[aeb9]::foo::'a)_'a/#0])`
`Opaque(DefId(0:13 ~ impl_trait_captures[aeb9]::foo::{opaque#0}), ['a/#0, T, 'a/#0])`
r? `@compiler-errors` (I would like someone who understands the opaque type setup to atleast review the type system commit, but the rest is likely reviewable by anyone)
|
|
We are gonna need it to uplift EarlyBinder
|
|
Warn (or error) when `Self` ctor from outer item is referenced in inner nested item
This implements a warning `SELF_CONSTRUCTOR_FROM_OUTER_ITEM` when a self constructor from an outer impl is referenced in an inner nested item. This is a proper fix mentioned https://github.com/rust-lang/rust/pull/117246#discussion_r1374648388.
This warning is additionally bumped to a hard error when the self type references generic parameters, since it's almost always going to ICE, and is basically *never* correct to do.
This also reverts part of https://github.com/rust-lang/rust/pull/117246, since I believe this is the proper fix and we shouldn't need the helper functions (`opt_param_at`/`opt_type_param`) any longer, since they shouldn't really ever be used in cases where we don't have this problem.
|
|
|
|
|
|
r=Nilstrieb
Expand `for_loops_over_fallibles` lint to lint on fallibles behind references.
Extends the scope of the (warn-by-default) lint `for_loops_over_fallibles` from just `for _ in x` where `x: Option<_>/Result<_, _>` to also cover `x: &(mut) Option<_>/Result<_>`
```rs
fn main() {
// Current lints
for _ in Some(42) {}
for _ in Ok::<_, i32>(42) {}
// New lints
for _ in &Some(42) {}
for _ in &mut Some(42) {}
for _ in &Ok::<_, i32>(42) {}
for _ in &mut Ok::<_, i32>(42) {}
// Should not lint
for _ in Some(42).into_iter() {}
for _ in Some(42).iter() {}
for _ in Some(42).iter_mut() {}
for _ in Ok::<_, i32>(42).into_iter() {}
for _ in Ok::<_, i32>(42).iter() {}
for _ in Ok::<_, i32>(42).iter_mut() {}
}
```
<details><summary><code>cargo build</code> diff</summary>
```diff
diff --git a/old.out b/new.out
index 84215aa..ca195a7 100644
--- a/old.out
+++ b/new.out
`@@` -1,33 +1,93 `@@`
warning: for loop over an `Option`. This is more readably written as an `if let` statement
--> src/main.rs:3:14
|
3 | for _ in Some(42) {}
| ^^^^^^^^
|
= note: `#[warn(for_loops_over_fallibles)]` on by default
help: to check pattern in a loop use `while let`
|
3 | while let Some(_) = Some(42) {}
| ~~~~~~~~~~~~~~~ ~~~
help: consider using `if let` to clear intent
|
3 | if let Some(_) = Some(42) {}
| ~~~~~~~~~~~~ ~~~
warning: for loop over a `Result`. This is more readably written as an `if let` statement
--> src/main.rs:4:14
|
4 | for _ in Ok::<_, i32>(42) {}
| ^^^^^^^^^^^^^^^^
|
help: to check pattern in a loop use `while let`
|
4 | while let Ok(_) = Ok::<_, i32>(42) {}
| ~~~~~~~~~~~~~ ~~~
help: consider using `if let` to clear intent
|
4 | if let Ok(_) = Ok::<_, i32>(42) {}
| ~~~~~~~~~~ ~~~
-warning: `for-loops-over-fallibles` (bin "for-loops-over-fallibles") generated 2 warnings
- Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.04s
+warning: for loop over a `&Option`. This is more readably written as an `if let` statement
+ --> src/main.rs:7:14
+ |
+7 | for _ in &Some(42) {}
+ | ^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+7 | while let Some(_) = &Some(42) {}
+ | ~~~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+7 | if let Some(_) = &Some(42) {}
+ | ~~~~~~~~~~~~ ~~~
+
+warning: for loop over a `&mut Option`. This is more readably written as an `if let` statement
+ --> src/main.rs:8:14
+ |
+8 | for _ in &mut Some(42) {}
+ | ^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+8 | while let Some(_) = &mut Some(42) {}
+ | ~~~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+8 | if let Some(_) = &mut Some(42) {}
+ | ~~~~~~~~~~~~ ~~~
+
+warning: for loop over a `&Result`. This is more readably written as an `if let` statement
+ --> src/main.rs:9:14
+ |
+9 | for _ in &Ok::<_, i32>(42) {}
+ | ^^^^^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+9 | while let Ok(_) = &Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+9 | if let Ok(_) = &Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~ ~~~
+
+warning: for loop over a `&mut Result`. This is more readably written as an `if let` statement
+ --> src/main.rs:10:14
+ |
+10 | for _ in &mut Ok::<_, i32>(42) {}
+ | ^^^^^^^^^^^^^^^^^^^^^
+ |
+help: to check pattern in a loop use `while let`
+ |
+10 | while let Ok(_) = &mut Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~~~~ ~~~
+help: consider using `if let` to clear intent
+ |
+10 | if let Ok(_) = &mut Ok::<_, i32>(42) {}
+ | ~~~~~~~~~~ ~~~
+
+warning: `for-loops-over-fallibles` (bin "for-loops-over-fallibles") generated 6 warnings
+ Finished `dev` profile [unoptimized + debuginfo] target(s) in 0.02s
```
</details>
-----
Question:
* ~~Currently, the article `an` is used for `&Option`, and `&mut Option` in the lint diagnostic, since that's what `Option` uses. Is this okay or should it be changed? (likewise, `a` is used for `&Result` and `&mut Result`)~~ The article `a` is used for `&Option`, `&mut Option`, `&Result`, `&mut Result` and (as before) `Result`. Only `Option` uses `an` (as before).
`@rustbot` label +A-lint
|
|
* instead simply set the primary message inside the lint decorator functions
* it used to be this way before [#]101986 which introduced `msg` to prevent
good path delayed bugs (which no longer exist) from firing under certain
circumstances when lints were suppressed / silenced
* this is no longer necessary for various reasons I presume
* it shaves off complexity and makes further changes easier to implement
|
|
compiler: add simd_ctpop intrinsic
Fairly straightforward addition.
cc `@rust-lang/opsem` new (extremely boring) intrinsic
|
|
generics' attributes
|
|
|
|
Rename Unsafe to Safety
Alternative to #124455, which is to just have one Safety enum to use everywhere, this opens the posibility of adding `ast::Safety::Safe` that's useful for unsafe extern blocks.
This leaves us today with:
```rust
enum ast::Safety {
Unsafe(Span),
Default,
// Safe (going to be added for unsafe extern blocks)
}
enum hir::Safety {
Unsafe,
Safe,
}
```
We would convert from `ast::Safety::Default` into the right Safety level according the context.
|
|
This mostly reverts commit 7449478c2f6fd2d72c12a51d8562f1e6108facab.
It also removes an `opt_param_at` that really is unnecessary given our
ICE policy for malformed intrinsics.
|
|
|
|
|
|
|
|
|
|
|
|
Split out `ty::AliasTerm` from `ty::AliasTy`
Splitting out `AliasTerm` (for use in project and normalizes goals) and `AliasTy` (for use in `ty::Alias`)
r? lcnr
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rollup of 7 pull requests
Successful merges:
- #124551 (Add benchmarks for `impl Debug for str`)
- #124915 (`rustc_target` cleanups)
- #124918 (Eliminate some `FIXME(lcnr)` comments)
- #124927 (opt-dist: use xz2 instead of xz crate)
- #124936 (analyse visitor: build proof tree in probe)
- #124943 (always use `GenericArgsRef`)
- #124955 (Use fewer origins when creating type variables.)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
|
|
`InferCtxt::next_{ty,const}_var*` all take an origin, but the
`param_def_id` is almost always `None`. This commit changes them to just
take a `Span` and build the origin within the method, and adds new
methods for the rare cases where `param_def_id` might not be `None`.
This avoids a lot of tedious origin building.
Specifically:
- next_ty_var{,_id_in_universe,_in_universe}: now take `Span` instead of
`TypeVariableOrigin`
- next_ty_var_with_origin: added
- next_const_var{,_in_universe}: takes Span instead of ConstVariableOrigin
- next_const_var_with_origin: added
- next_region_var, next_region_var_in_universe: these are unchanged,
still take RegionVariableOrigin
The API inconsistency (ty/const vs region) seems worth it for the
large conciseness improvements.
|
|
|
|
or inline such functions if useless.
|
|
Rollup of 3 pull requests
Successful merges:
- #124003 (Dellvmize some intrinsics (use `u32` instead of `Self` in some integer intrinsics))
- #124169 (Don't fatal when calling `expect_one_of` when recovering arg in `parse_seq`)
- #124286 (Subtree sync for rustc_codegen_cranelift)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Dellvmize some intrinsics (use `u32` instead of `Self` in some integer intrinsics)
This implements https://github.com/rust-lang/compiler-team/issues/693 minus what was implemented in #123226.
Note: I decided to _not_ change `shl`/... builder methods, as it just doesn't seem worth it.
r? ``@scottmcm``
|
|
Do `check_coroutine_obligations` once per typeck root
We only need to do `check_coroutine_obligations` once per typeck root, especially since the new solver can't really (easily) associate which obligations correspond to which coroutines.
This requires us to move the checks for sized coroutine fields into `mir_coroutine_witnesses`, but that's fine imo.
r? lcnr
|
