| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
Remove `feed_local_def_id`
best reviewed commit by commit
Basically I returned `TyCtxtFeed` from `create_def` and then preserved that in the local caches
based on https://github.com/rust-lang/rust/pull/121084
r? ````@petrochenkov````
|
|
Add proper cfgs for struct HirIdValidator used only with debug-assert
See https://github.com/rust-lang/rust/pull/122065#issuecomment-1980118572.
I think it's due to #121752.
|
|
|
|
|
|
|
|
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
|
|
Replace `abort_if_errors` calls that are certain to abort -- because
we emit an error immediately beforehand -- with `FatalErro.raise()`.
|
|
Currently `emit_stashed_diagnostic` is called from four(!) different
places: `print_error_count`, `DiagCtxtInner::drop`, `abort_if_errors`,
and `compile_status`.
And `flush_delayed` is called from two different places:
`DiagCtxtInner::drop` and `Queries`.
This is pretty gross! Each one should really be called from a single
place, but there's a bunch of entanglements. This commit cleans up this
mess.
Specifically, it:
- Removes all the existing calls to `emit_stashed_diagnostic`, and adds
a single new call in `finish_diagnostics`.
- Removes the early `flush_delayed` call in `codegen_and_build_linker`,
replacing it with a simple early return if delayed bugs are present.
- Changes `DiagCtxtInner::drop` and `DiagCtxtInner::flush_delayed` so
they both assert that the stashed diagnostics are empty (i.e.
processed beforehand).
- Changes `interface::run_compiler` so that any errors emitted during
`finish_diagnostics` (i.e. late-emitted stashed diagnostics) are
counted and cannot be overlooked. This requires adding
`ErrorGuaranteed` return values to several functions.
- Removes the `stashed_err_count` call in `analysis`. This is possible
now that we don't have to worry about calling `flush_delayed` early
from `codegen_and_build_linker` when stashed diagnostics are pending.
- Changes the `span_bug` case in `handle_tuple_field_pattern_match` to a
`delayed_span_bug`, because it now can be reached due to the removal
of the `stashed_err_count` call in `analysis`.
- Slightly changes the expected output of three tests. If no errors are
emitted but there are delayed bugs, the error count is no longer
printed. This is because delayed bugs are now always printed after the
error count is printed (or not printed, if the error count is zero).
There is a lot going on in this commit. It's hard to break into smaller
pieces because the existing code is very tangled. It took me a long time
and a lot of effort to understand how the different pieces interact, and
I think the new code is a lot simpler and easier to understand.
|
|
Currently `has_errors` excludes lint errors. This commit changes it to
include lint errors.
The motivation for this is that for most places it doesn't matter
whether lint errors are included or not. But there are multiple places
where they must be includes, and only one place where they must not be
included. So it makes sense for `has_errors` to do the thing that fits
the most situations, and the new `has_errors_excluding_lint_errors`
method in the one exceptional place.
The same change is made for `err_count`. Annoyingly, this requires the
introduction of `err_count_excluding_lint_errs` for one place, to
preserve existing error printing behaviour. But I still think the change
is worthwhile overall.
|
|
|
|
When you stash an error, the error count is incremented. You can then
use the non-zero error count to get an `ErrorGuaranteed`. You can then
steal the error, which decrements the error count. You can then cancel
the error.
Example code:
```
fn unsound(dcx: &DiagCtxt) -> ErrorGuaranteed {
let sp = rustc_span::DUMMY_SP;
let k = rustc_errors::StashKey::Cycle;
dcx.struct_err("bogus").stash(sp, k); // increment error count on stash
let guar = dcx.has_errors().unwrap(); // ErrorGuaranteed from error count > 0
let err = dcx.steal_diagnostic(sp, k).unwrap(); // decrement error count on steal
err.cancel(); // cancel error
guar // ErrorGuaranteed with no error emitted!
}
```
This commit fixes the problem in the simplest way: by not counting
stashed errors in `DiagCtxt::{err_count,has_errors}`.
However, just doing this without any other changes leads to over 40 ui
test failures. Mostly because of uninteresting extra errors (many saying
"type annotations needed" when type inference fails), and in a few
cases, due to delayed bugs causing ICEs when no normal errors are
printed.
To fix these, this commit adds `DiagCtxt::stashed_err_count`, and uses
it in three places alongside `DiagCtxt::{has_errors,err_count}`. It's
dodgy to rely on it, because unlike `DiagCtxt::err_count` it can go up
and down. But it's needed to preserve existing behaviour, and at least
the three places that need it are now obvious.
|
|
For consistency with `warn`/`struct_warn`, and also `{create,emit}_err`,
all of which use an abbreviated form.
|
|
|
|
|
|
Also add some `dcx` methods to types that wrap `TyCtxt`, for easier
access.
|
|
|
|
detects redundant imports that can be eliminated.
for #117772 :
In order to facilitate review and modification, split the checking code and
removing redundant imports code into two PR.
|
|
Instead of allowing `rustc::potential_query_instability` on the whole
crate we go over each lint and allow it individually if it is safe to
do. Turns out all instances were safe to allow in this crate.
|
|
|
|
Eagerly compute output_filenames
It can be computed before creating TyCtxt. Previously the query would also write the dep info file, which meant that the output filenames couldn't be accessed before macro expansion is done. The dep info file writing is now done as a separate non-query function. The old query was always executed again anyways due to depending on the HIR.
Also encode the output_filenames in rlink files to ensure `#![crate_name]` affects the linking stage when doing separate compiling and linking using `-Zno-link`/`-Zlink-only`.
|
|
It has side-effects and as such can't be cached.
|
|
|
|
Since the introduction of the crate attribute pre-expansion pass we
don't need access to the TyCtxt to compute it.
|
|
|
|
|
|
Queries cleanups
r? `@bjorn3`
|
|
`rustc_ast_pretty` cleanups
Some improvements I found while looking at this code.
r? `@fee1-dead`
|
|
And remove the relevant getters on `Compiler` and `Queries`.
|
|
|
|
`x clippy compiler -Aclippy::all -Wclippy::needless_borrow --fix`.
Then I had to remove a few unnecessary parens and muts that were exposed
now.
|
|
This was made possible by the removal of plugin support, which
simplified lint store creation.
This simplifies the places in rustc and rustdoc that call
`describe_lints`, which are early on. The lint store is now built before
those places, so they don't have to create their own lint store for
temporary use, they can just use the main one.
|
|
|
|
They've been deprecated for four years.
This commit includes the following changes.
- It eliminates the `rustc_plugin_impl` crate.
- It changes the language used for lints in
`compiler/rustc_driver_impl/src/lib.rs` and
`compiler/rustc_lint/src/context.rs`. External lints are now called
"loaded" lints, rather than "plugins" to avoid confusion with the old
plugins. This only has a tiny effect on the output of `-W help`.
- E0457 and E0498 are no longer used.
- E0463 is narrowed, now only relating to unfound crates, not plugins.
- The `plugin` feature was moved from "active" to "removed".
- It removes the entire plugins chapter from the unstable book.
- It removes quite a few tests, mostly all of those in
`tests/ui-fulldeps/plugin/`.
Closes #29597.
|
|
Using `find` and `any` from `std` makes the code shorter and clearer.
|
|
|
|
It was added in 51938c61f6f1b26e463f9071716f543543486e72, a commit with
a 7,720 line diff and a one line commit message. Even then the comment
was incorrect; there was a removed a `build_output_filenames` call with
a `&[]` argument in rustdoc, but the commit removed that call. In such a
large commit, it's easy for small errors to occur.
|
|
|
|
Fix inline const pattern unsafety checking in THIR
Fix THIR unsafety checking of inline constants.
- Steal THIR in THIR unsafety checking (if enabled) instead of MIR lowering.
- Represent inline constants in THIR patterns.
|
|
|
|
|
|
THIR unsafety checking was getting a cycle of
function unsafety checking
-> building THIR for the function
-> evaluating pattern inline constants in the function
-> building MIR for the inline constant
-> checking unsafety of functions (so that THIR can be stolen)
This is fixed by not stealing THIR when generating MIR but instead when
unsafety checking.
This leaves an issue with pattern inline constants not being unsafety
checked because they are evaluated away when generating THIR.
To fix that we now represent inline constants in THIR patterns and
visit them in THIR unsafety checking.
|
|
This removes a bit of global mutable state
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Do not compute unneeded query results.
r? `@ghost`
|
