| Age | Commit message (Collapse) | Author | Lines |
|---|
|
compared to be equal in different crates
|
|
|
|
|
|
Rollup of 9 pull requests
Successful merges:
- #132156 (When encountering unexpected closure return type, point at return type/expression)
- #133429 (Autodiff Upstreaming - rustc_codegen_ssa, rustc_middle)
- #136281 (`rustc_hir_analysis` cleanups)
- #136297 (Fix a typo in profile-guided-optimization.md)
- #136300 (atomic: extend compare_and_swap migration docs)
- #136310 (normalize `*.long-type.txt` paths for compare-mode tests)
- #136312 (Disable `overflow_delimited_expr` in edition 2024)
- #136313 (Filter out RPITITs when suggesting unconstrained assoc type on too many generics)
- #136323 (Fix a typo in conventions.md)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Autodiff Upstreaming - rustc_codegen_ssa, rustc_middle
This PR should not be merged until the rustc_codegen_llvm part is merged.
I will also alter it a little based on what get's shaved off from the cg_llvm PR,
and address some of the feedback I received in the other PR (including cleanups).
I am putting it already up to
1) Discuss with `@jieyouxu` if there is more work needed to add tests to this and
2) Pray that there is someone reviewing who can tell me why some of my autodiff invocations get lost.
Re 1: My test require fat-lto. I also modify the compilation pipeline. So if there are any other llvm-ir tests in the same compilation unit then I will likely break them. Luckily there are two groups who currently have the same fat-lto requirement for their GPU code which I have for my autodiff code and both groups have some plans to enable support for thin-lto. Once either that work pans out, I'll copy it over for this feature. I will also work on not changing the optimization pipeline for functions not differentiated, but that will require some thoughts and engineering, so I think it would be good to be able to run the autodiff tests isolated from the rest for now. Can you guide me here please?
For context, here are some of my tests in the samples folder: https://github.com/EnzymeAD/rustbook
Re 2: This is a pretty serious issue, since it effectively prevents publishing libraries making use of autodiff: https://github.com/EnzymeAD/rust/issues/173. For some reason my dummy code persists till the end, so the code which calls autodiff, deletes the dummy, and inserts the code to compute the derivative never gets executed. To me it looks like the rustc_autodiff attribute just get's dropped, but I don't know WHY? Any help would be super appreciated, as rustc queries look a bit voodoo to me.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
r? `@jieyouxu`
|
|
|
|
|
|
r=workingjubilee
ABI-required target features: warn when they are missing in base CPU
Part of https://github.com/rust-lang/rust/pull/135408:
instead of adding ABI-required features to the target we build for LLVM, check that they are already there. Crucially we check this after applying `-Ctarget-cpu` and `-Ctarget-feature`, by reading `sess.unstable_target_features`. This means we can tweak the ABI target feature check without changing the behavior for any existing user; they will get warnings but the target features behave as before.
The test changes here show that we are un-doing the "add all required target features" part. Without the full #135408, there is no way to take a way an ABI-required target feature with `-Ctarget-cpu`, so we cannot yet test that part.
Cc ``@workingjubilee``
|
|
Remove -Zinline-in-all-cgus and clean up tests/codegen-units/
Implementation of https://github.com/rust-lang/compiler-team/issues/814
I've taken some liberties with cleaning up the CGU partitioning tests, because that's the only place this flag was used and also mattered. I've often fought a lot with the contents of `tests/codegen-units` and it has never been clear to me when a test failure indicates a problem with my changes as opposed to a test just needing to be manually blessed. Hopefully the combination of the new README, new comments, and using `-Zprint-mono-items=lazy` in the partitioning tests improves that.
I've also deleted some of the `tests/run-make/sepcomp` tests. I think all the "sepcomp" tests have been obviated for years by better-designed (less flaky, clearer failures) test suites, but here I'm just deleting the ones I'm confident in.
|
|
|
|
than silently enabling them)
|
|
Get rid of RunCompiler
The various `set_*` methods that have been removed can be replaced by setting the respective fields in the `Callbacks::config` implementation. `set_using_internal_features` was often forgotten and it's equivalent is now done automatically.
|
|
|
|
They can both be set inside the config callback too.
|
|
|
|
Properly note when query stack is being cut off
cc #70953
also, i'm not certain whether we should even limit this at all. i don't see the problem with printing the full query stack, apparently it was limited b/c we used to ICE? but we're already printing the full stack to disk since #108714.
r? oli-obk
|
|
Respect --sysroot for rustc -vV and -Cpasses=list
This is necessary when the specified codegen backend is in a custom sysroot.
Fixes https://github.com/rust-lang/rust/issues/135165
|
|
|
|
|
|
|
|
add `-Zmin-function-alignment`
tracking issue: https://github.com/rust-lang/rust/issues/82232
This PR adds the `-Zmin-function-alignment=<align>` flag, that specifies a minimum alignment for all* functions.
### Motivation
This feature is requested by RfL [here](https://github.com/rust-lang/rust/issues/128830):
> i.e. the equivalents of `-fmin-function-alignment` ([GCC](https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-fmin-function-alignment_003dn), Clang does not support it) / `-falign-functions` ([GCC](https://gcc.gnu.org/onlinedocs/gcc/Optimize-Options.html#index-falign-functions), [Clang](https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang1-falign-functions)).
>
> For the Linux kernel, the behavior wanted is that of GCC's `-fmin-function-alignment` and Clang's `-falign-functions`, i.e. align all functions, including cold functions.
>
> There is [`feature(fn_align)`](https://github.com/rust-lang/rust/issues/82232), but we need to do it globally.
### Behavior
The `fn_align` feature does not have an RFC. It was decided at the time that it would not be necessary, but maybe we feel differently about that now? In any case, here are the semantics of this flag:
- `-Zmin-function-alignment=<align>` specifies the minimum alignment of all* functions
- the `#[repr(align(<align>))]` attribute can be used to override the function alignment on a per-function basis: when `-Zmin-function-alignment` is specified, the attribute's value is only used when it is higher than the value passed to `-Zmin-function-alignment`.
- the target may decide to use a higher value (e.g. on x86_64 the minimum that LLVM generates is 16)
- The highest supported alignment in rust is `2^29`: I checked a bunch of targets, and they all emit the `.p2align 29` directive for targets that align functions at all (some GPU stuff does not have function alignment).
*: Only with `build-std` would the minimum alignment also be applied to `std` functions.
---
cc `@ojeda`
r? `@workingjubilee` you were active on the tracking issue
|
|
|
|
mark deprecated option as deprecated in rustc_session to remove copypasta and small refactor
This marks deprecated options as deprecated via flag in options table in rustc_session, which removes copypasted deprecation text from rustc_driver_impl.
This also adds warning for deprecated `-C ar` option, which didn't emitted any warnings before.
Makes `inline_threshold` `[UNTRACKED]`, as it do nothing.
Adds few tests.
See individual commits.
|
|
inline_threshold mark deprecated
no-stack-check
print deprecation message for -Car too
inline_threshold deprecated and do nothing: make in untracked
make OptionDesc struct from tuple
|
|
Gated behind an unstable `-Z emscripten-wasm-eh` flag
|
|
Improve dependency_format a bit
* Make `DependencyList` an `IndexVec` rather than emulating one using a `Vec` (which was off-by-one as LOCAL_CRATE was intentionally skipped)
* Update some comments for the fact that we now use `#[global_allocator]` rather than `extern crate alloc_system;`/`extern crate alloc_jemalloc;` for specifying which allocator to use. We still use a similar mechanism for the panic runtime, so refer to the panic runtime in those comments instead.
* An unrelated refactor to `create_and_enter_global_ctxt` I forgot to include in https://github.com/rust-lang/rust/pull/134302. This refactor is too small to be worth it's own PR.
|
|
|
|
|
|
`rustc_span::symbol` defines some things that are re-exported from
`rustc_span`, such as `Symbol` and `sym`. But it doesn't re-export some
closely related things such as `Ident` and `kw`. So you can do `use
rustc_span::{Symbol, sym}` but you have to do `use
rustc_span::symbol::{Ident, kw}`, which is inconsistent for no good
reason.
This commit re-exports `Ident`, `kw`, and `MacroRulesNormalizedIdent`,
and changes many `rustc_span::symbol::` qualifiers in `compiler/` to
`rustc_span::`. This is a 200+ net line of code reduction, mostly
because many files with two `use rustc_span` items can be reduced to
one.
|
|
Split up attribute parsing code and move data types to `rustc_attr_data_structures`
This change renames `rustc_attr` to `rustc_attr_parsing`, and splits up the parsing code. At the same time, all the data types used move to `rustc_attr_data_structures`. This is in preparation of also having a third crate: `rustc_attr_validation`
I initially envisioned this as two separate PRs, but I think doing it in one go reduces the number of ways others would have to rebase their changes on this. However, I can still split them.
r? `@oli-obk` (we already discussed how this is a first step in a larger plan)
For a more detailed plan on how attributes are going to change, see https://github.com/rust-lang/rust/issues/131229
Edit: this looks like a giant PR, but the changes are actually rather trivial. Each commit is reviewable on its own, and mostly moves code around. No new logic is added.
|
|
Remove queries from the driver interface
All uses of driver queries in the public api of rustc_driver have been removed in https://github.com/rust-lang/rust/pull/134130 already. This removes driver queries from rustc_interface and does a couple of cleanups around TyCtxt construction and entering enabled by this removal.
Finishes the removal of driver queries started with https://github.com/rust-lang/rust/pull/126834.
|
|
|
|
|
|
|
|
This allows us to call GlobalCtxt::finish exactly once.
|
|
|
|
|
|
A bunch of cleanups (part 2)
Just like https://github.com/rust-lang/rust/pull/133567 these were all found while looking at the respective code, but are not blocking any other changes I want to make in the short term.
|
|
Rollup of 7 pull requests
Successful merges:
- #133900 (Advent of `tests/ui` (misc cleanups and improvements) [1/N])
- #133937 (Keep track of parse errors in `mod`s and don't emit resolve errors for paths involving them)
- #133938 (`rustc_mir_dataflow` cleanups, including some renamings)
- #134058 (interpret: reduce usage of TypingEnv::fully_monomorphized)
- #134130 (Stop using driver queries in the public API)
- #134140 (Add AST support for unsafe binders)
- #134229 (Fix typos in docs on provenance)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
|
|
It only exists to pass some information from one part of the driver to
another part. We can directly pass this information to the function that
needs it to reduce the amount of mutation of the Session.
|
|
|
|
be invalid to toggle
Also rename some things for extra clarity
|
|
A bunch of cleanups
These are all extracted from a branch I have to get rid of driver queries. Most of the commits are not directly necessary for this, but were found in the process of implementing the removal of driver queries.
Previous PR: https://github.com/rust-lang/rust/pull/132410
|
|
|
|
|
|
delayed bugs
|
|
It was inconsistently done (sometimes even within a single function) and
most of the rest of the compiler uses fatal errors instead, which need
to be caught using catch_with_exit_code anyway. Using fatal errors
instead of ErrorGuaranteed everywhere in the driver simplifies things a
bit.
|
|
And pass this to the individual emitters when necessary.
|
|
|
