| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Queries cleanups
r? `@bjorn3`
|
|
`rustc_ast_pretty` cleanups
Some improvements I found while looking at this code.
r? `@fee1-dead`
|
|
There is no real need for them to be separate.
|
|
And remove the relevant getters on `Compiler` and `Queries`.
|
|
|
|
|
|
`x clippy compiler -Aclippy::all -Wclippy::needless_borrow --fix`.
Then I had to remove a few unnecessary parens and muts that were exposed
now.
|
|
Like `Compiler::codegen_backend`.
|
|
|
|
It matches the type, and a noun makes more sense than a verb.
The `output_filenames` function still uses a profiling label named
`prepare_outputs`, but I think that makes sense as a verb and can be
left unchanged.
|
|
It can easily be passed in. And that removes the single clone of
`Compiler::codegen_backend`, which means it no longer needs to be `Lrc`.
|
|
It can easily be passed in. And that removes the single clone of
`Compiler::session`, which means it no longer needs to be `Lrc`.
|
|
|
|
Lint registration now happens early enough that we can run it from
`Config`, before `Compiler` is created.
|
|
This was made possible by the removal of plugin support, which
simplified lint store creation.
This simplifies the places in rustc and rustdoc that call
`describe_lints`, which are early on. The lint store is now built before
those places, so they don't have to create their own lint store for
temporary use, they can just use the main one.
|
|
|
|
|
|
Add -Z llvm_module_flag
Allow adding values to the `!llvm.module.flags` metadata for a generated module. The syntax is
`-Z llvm_module_flag=<name>:<type>:<value>:<behavior>`
Currently only u32 values are supported but the type is required to be specified for forward compatibility. The `behavior` element must match one of the named LLVM metadata behaviors.viors.
This flag is expected to be perma-unstable.
|
|
Remove `-Zperf-stats`.
The included measurements have varied over the years. At one point there were quite a few more, but #49558 deleted a lot that were no longer used. Today there's just four, and it's a motley collection that doesn't seem particularly valuable.
I think it has been well and truly subsumed by self-profiling, which collects way more data.
r? `@wesleywiser`
|
|
The included measurements have varied over the years. At one point there
were quite a few more, but #49558 deleted a lot that were no longer
used. Today there's just four, and it's a motley collection that doesn't
seem particularly valuable.
I think it has been well and truly subsumed by self-profiling, which
collects way more data.
|
|
Allow adding values to the `!llvm.module.flags` metadata for a generated
module. The syntax is
`-Z llvm_module_flag=<name>:<type>:<value>:<behavior>`
Currently only u32 values are supported but the type is required to be
specified for forward compatibility. The `behavior` element must match
one of the named LLVM metadata behaviors.viors.
This flag is expected to be perma-unstable.
|
|
It was added way back in #28585 under the name `-Zkeep-mtwt-tables`. The
justification was:
> This is so that the resolution results can be used after analysis,
> potentially for tool support.
There are no uses of significance in the code base, and various Google
searches for both option names (and variants) found nothing of interest.
@petrochenkov says removing this part (and it's only part) of the
hygiene data is dubious. It doesn't seem that big, so let's just keep it
around.
|
|
|
|
They've been deprecated for four years.
This commit includes the following changes.
- It eliminates the `rustc_plugin_impl` crate.
- It changes the language used for lints in
`compiler/rustc_driver_impl/src/lib.rs` and
`compiler/rustc_lint/src/context.rs`. External lints are now called
"loaded" lints, rather than "plugins" to avoid confusion with the old
plugins. This only has a tiny effect on the output of `-W help`.
- E0457 and E0498 are no longer used.
- E0463 is narrowed, now only relating to unfound crates, not plugins.
- The `plugin` feature was moved from "active" to "removed".
- It removes the entire plugins chapter from the unstable book.
- It removes quite a few tests, mostly all of those in
`tests/ui-fulldeps/plugin/`.
Closes #29597.
|
|
`rustc_span` cleanups
Just some things I found while looking over this crate.
r? `@oli-obk`
|
|
Most notably, this commit changes the `pub use crate::*;` in that file
to `use crate::*;`. This requires a lot of `use` items in other crates
to be adjusted, because everything defined within `rustc_span::*` was
also available via `rustc_span::source_map::*`, which is bizarre.
The commit also removes `SourceMap::span_to_relative_line_string`, which
is unused.
|
|
|
|
Currently the parts of session initialization that happen within
`rustc_interface` are split between `run_compiler` and `create_session`.
This split isn't necessary and obscures what's happening.
This commit merges the two functions. I think a single longer function
is much clearer than splitting this code across two functions in
different modules, especially when `create_session` has 13 parameters,
and is misnamed (it also creates the codegen backend). The net result is
43 fewer lines of code.
|
|
|
|
|
|
- The early return can be right at the top.
- The control flow is simplified with `if let`.
- The `collect` isn't necessary.
- The "Unconditionally" comment is erroneously duplicated from
`check_attr_crate_type`, and can be removed.
|
|
Using `find` and `any` from `std` makes the code shorter and clearer.
|
|
|
|
It was added in 51938c61f6f1b26e463f9071716f543543486e72, a commit with
a 7,720 line diff and a one line commit message. Even then the comment
was incorrect; there was a removed a `build_output_filenames` call with
a `&[]` argument in rustdoc, but the commit removed that call. In such a
large commit, it's easy for small errors to occur.
|
|
|
|
They now only ever contains symbols.
|
|
|
|
|
|
By storing the unparsed values in `Config` and then parsing them within
`run_compiler`, the parsing functions can use the main symbol interner,
and not create their own short-lived interners.
This change also eliminates the need for one `EarlyErrorHandler` in
rustdoc, because parsing errors can be reported by another, slightly
later `EarlyErrorHandler`.
|
|
`rustc_interface` cleanups
Particularly in and around `--cfg` and `--check-cfg` handling.
r? `@oli-obk`
|
|
Cleanup and improve `--check-cfg` implementation
This PR removes some indentation in the code, as well as preventing some bugs/misusages and fix a nit in the doc.
r? ```@petrochenkov``` (maybe)
|
|
Remove -Zdep-tasks.
This option is not useful any more, we can use `tracing` and `RUSTC_LOG` to debug the dep-graph.
|
|
`parse_cfgspecs` and `parse_check_cfg` run very early, before the main
interner is running. They each use a short-lived interner and convert
all interned symbols to strings in their output data structures. Once
the main interner starts up, these data structures get converted into
new data structures that are identical except with the strings converted
to symbols.
All is not obvious from the current code, which is a mess, particularly
with inconsistent naming that obscures the parallel string/symbol data
structures. This commit clean things up a lot.
- The existing `CheckCfg` type is generic, allowing both
`CheckCfg<String>` and `CheckCfg<Symbol>` forms. This is really
useful, but it defaults to `String`. The commit removes the default so
we have to use `CheckCfg<String>` and `CheckCfg<Symbol>` explicitly,
which makes things clearer.
- Introduces `Cfg`, which is generic over `String` and `Symbol`, similar
to `CheckCfg`.
- Renames some things.
- `parse_cfgspecs` -> `parse_cfg`
- `CfgSpecs` -> `Cfg<String>`, plus it's used in more places, rather
than the underlying `FxHashSet` type.
- `CrateConfig` -> `Cfg<Symbol>`.
- `CrateCheckConfig` -> `CheckCfg<Symbol>`
- Adds some comments explaining the string-to-symbol conversions.
- `to_crate_check_config`, which converts `CheckCfg<String>` to
`CheckCfg<Symbol>`, is inlined and removed and combined with the
overly-general `CheckCfg::map_data` to produce
`CheckCfg::<String>::intern`.
- `build_configuration` now does the `Cfg<String>`-to-`Cfg<Symbol>`
conversion, so callers don't need to, which removes the need for
`to_crate_config`.
The diff for two of the fields in `Config` is a good example of the
improved clarity:
```
- pub crate_cfg: FxHashSet<(String, Option<String>)>,
- pub crate_check_cfg: CheckCfg,
+ pub crate_cfg: Cfg<String>,
+ pub crate_check_cfg: CheckCfg<String>,
```
Compare that with the diff for the corresponding fields in `ParseSess`,
and the relationship to `Config` is much clearer than before:
```
- pub config: CrateConfig,
- pub check_config: CrateCheckConfig,
+ pub config: Cfg<Symbol>,
+ pub check_config: CheckCfg<Symbol>,
```
|
|
In `parse_cfg`, we now construct a `FxHashSet<String>` directly instead of
constructing a `FxHashSet<Symbol>` and then immediately converting it to a
`FxHashSet<String>`(!)
(The type names made this behaviour non-obvious. The next commit will
make the type names clearer.)
|
|
In `test_edition_parsing`, change the
`build_session_options_and_crate_config` call to
`build_session_options`, because the config isn't used.
That leaves a single call site for
`build_session_options_and_crate_config`, so just inline and remove it.
|
|
|
|
|
|
|
|
The value of `-Cinstrument-coverage=` doesn't need to be `Option`
(Extracted from #117199, since this is a purely internal cleanup that can land independently.)
Not using this flag is identical to passing `-Cinstrument-coverage=off`, so there's no need to distinguish between `None` and `Some(Off)`.
|
|
Not using this flag is identical to passing `-Cinstrument-coverage=off`, so
there's no need to distinguish between `None` and `Some(Off)`.
|
