| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
This also remove safety information from MIR.
|
|
Add a `CurrentGcx` type to let the deadlock handler access `TyCtxt`
This brings back `GCX_PTR` (previously removed in https://github.com/rust-lang/rust/pull/74969) allowing the deadlock handler access to `GlobalCtxt`. This fixes https://github.com/rust-lang/rust/issues/111522.
r? `@cjgillot`
|
|
|
|
|
|
|
|
r=davidtwco
conditionally ignore fatal diagnostic in the SilentEmitter
This change is primarily meant to allow rustfmt to ignore all diagnostics when using the `SilentEmitter`. Back in #121301 the `SilentEmitter` was shared between rustc and rustfmt. This changed rustfmt's behavior from ignoring all diagnostic to emitting fatal diagnostics, which lead to https://github.com/rust-lang/rustfmt/issues/6109.
These changes allow rustfmt to maintain its previous behaviour when using the `SilentEmitter`, while allowing rustc code to still emit fatal diagnostics.
|
|
workingjubilee:suggest-rust-min-stack-workaround-on-overflow, r=TaKO8Ki
Suggest `RUST_MIN_STACK` workaround on overflow
For some Rust crates, like p384, we can't do a whole lot about it even if the stack overflow is reported like in rust-lang/rust#122357 because the problem may be inside LLVM or another codegen backend. We can, however, suggest people set a new `RUST_MIN_STACK` value while handling the SIGSEGV, as that stack-setting will carry forward into the dylib.
As a bonus, this also leads to cleaning up the stack-setting code a bit.
|
|
|
|
|
|
Because the underlying type is called `Target`. (There is also a
separate type called `TargetCfg`.)
|
|
Backend and target selection is a mess: the target can override the
backend (via `Target::default_codegen_backend`), *and* the backend can
override the target (via `CodegenBackend::target_override`).
The code that handles this is ugly. It calls `build_target_config`
twice, once before getting the backend and once again afterward. It also
must check that both overrides aren't triggering at the same time.
This commit removes the latter override. It's used in rust-gpu but
@eddyb said via Zulip that removing it would be ok. This simplifies the
code greatly, and will allow some nice follow-up refactorings.
|
|
This change is primarily meant to allow rustfmt to ignore all
diagnostics when using the `SilentEmitter`. Back in PR 121301 the
`SilentEmitter` was shared between rustc and rustfmt. This changed
rustfmt's behavior from ignoring all diagnostic to emitting fatal
diagnostics.
These changes allow rustfmt to maintain it's previous behaviour when
using the SilentEmitter, while allowing rustc code to still emit fatal
diagnostics.
|
|
Make incremental sessions identity no longer depend on the crate names provided by source code
This makes incremental sessions identity no longer depend on the crate names provided by source code, implementing
https://github.com/rust-lang/compiler-team/issues/726.
r? ````@oli-obk````
|
|
r=oli-obk
Document `TRACK_DIAGNOSTIC` calls.
r? ```````@cjgillot```````
|
|
Revert "Auto merge of #122140 - oli-obk:track_errors13, r=davidtwco"
This reverts commit 65cd843ae06ad00123c131a431ed5304e4cd577a, reversing changes made to d255c6a57c393db6221b1ff700daea478436f1cd.
reverts https://github.com/rust-lang/rust/pull/122140
It was a large regression in wall time due to trashing CPU caches
|
|
provided by source code
|
|
coverage: Remove or migrate all unstable values of `-Cinstrument-coverage`
(This PR was substantially overhauled from its original version, which migrated all of the existing unstable values intact.)
This PR takes the three nightly-only values that are currently accepted by `-Cinstrument-coverage`, completely removes two of them (`except-unused-functions` and `except-unused-generics`), and migrates the third (`branch`) over to a newly-introduced unstable flag `-Zcoverage-options`.
I have a few motivations for wanting to do this:
- It's unclear whether anyone actually uses the `except-unused-*` values, so this serves as an opportunity to either remove them, or prompt existing users to object to their removal.
- After #117199, the stable values of `-Cinstrument-coverage` treat it as a boolean-valued flag, so having nightly-only extra values feels out-of-place.
- Nightly-only values also require extra ad-hoc code to make sure they aren't accidentally exposed to stable users.
- The new system allows multiple different settings to be toggled independently, which isn't possible in the current single-value system.
- The new system makes it easier to introduce new behaviour behind an unstable toggle, and then gather nightly-user feedback before possibly making it the default behaviour for all users.
- The new system also gives us a convenient place to put relatively-narrow options that won't ever be the default, but that nightly users might still want access to.
- It's likely that we will eventually want to give stable users more fine-grained control over coverage instrumentation. The new flag serves as a prototype of what that stable UI might eventually look like.
The `branch` option is a placeholder that currently does nothing. It will be used by #122322 to opt into branch coverage instrumentation.
---
I see `-Zcoverage-options` as something that will exist more-or-less indefinitely, though individual sub-options might come and go as appropriate. I think there will always be some demand for nightly-only toggles, so I don't see `-Zcoverage-options` itself ever being stable, though we might eventually stabilize something similar to it.
|
|
Verify that query keys result in unique dep nodes
This implements checking that query keys result into unique dep nodes as mentioned in https://github.com/rust-lang/rust/pull/112469.
We could do a perf check to see how expensive this is.
r? `@michaelwoerister`
|
|
This new nightly-only flag can be used to toggle fine-grained flags that
control the details of coverage instrumentation.
Currently the only supported flag value is `branch` (or `no-branch`), which is
a placeholder for upcoming support for branch coverage. Other flag values can
be added in the future, to prototype proposed new behaviour, or to enable
special non-default behaviour.
|
|
|
|
This reverts commit 65cd843ae06ad00123c131a431ed5304e4cd577a, reversing
changes made to d255c6a57c393db6221b1ff700daea478436f1cd.
|
|
Rollup of 15 pull requests
Successful merges:
- #116791 (Allow codegen backends to opt-out of parallel codegen)
- #116793 (Allow targets to override default codegen backend)
- #117458 (LLVM Bitcode Linker: A self contained linker for nvptx and other targets)
- #119385 (Fix type resolution of associated const equality bounds (take 2))
- #121438 (std support for wasm32 panic=unwind)
- #121893 (Add tests (and a bit of cleanup) for interior mut handling in promotion and const-checking)
- #122080 (Clarity improvements to `DropTree`)
- #122152 (Improve diagnostics for parenthesized type arguments)
- #122166 (Remove the unused `field_remapping` field from `TypeLowering`)
- #122249 (interpret: do not call machine read hooks during validation)
- #122299 (Store backtrace for `must_produce_diag`)
- #122318 (Revision-related tweaks for next-solver tests)
- #122320 (Use ptradd for vtable indexing)
- #122328 (unix_sigpipe: Replace `inherit` with `sig_dfl` in syntax tests)
- #122330 (bootstrap readme: fix, improve, update)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Allow targets to override default codegen backend
Implements https://github.com/rust-lang/compiler-team/issues/670.
|
|
Allow codegen backends to opt-out of parallel codegen
This makes it a bit easier to write cursed codegen backends.
|
|
This improves parallel rustc parallelism by avoiding the bottleneck after each individual `par_body_owners` (because it needs to wait for queries to finish, so if there is one long running one, a lot of cores will be idle while waiting for the single query).
|
|
|
|
|
|
Remove `feed_local_def_id`
best reviewed commit by commit
Basically I returned `TyCtxtFeed` from `create_def` and then preserved that in the local caches
based on https://github.com/rust-lang/rust/pull/121084
r? ````@petrochenkov````
|
|
Add proper cfgs for struct HirIdValidator used only with debug-assert
See https://github.com/rust-lang/rust/pull/122065#issuecomment-1980118572.
I think it's due to #121752.
|
|
r=davidtwco
Rework `untranslatable_diagnostic` lint
Currently it only checks calls to functions marked with `#[rustc_lint_diagnostics]`. This PR changes it to check calls to any function with an `impl Into<{D,Subd}iagnosticMessage>` parameter. This greatly improves its coverage and doesn't rely on people remembering to add `#[rustc_lint_diagnostics]`. It also lets us add `#[rustc_lint_diagnostics]` to a number of functions that don't have an `impl Into<{D,Subd}iagnosticMessage>`, such as `Diag::span`.
r? ``@davidtwco``
|
|
|
|
|
|
Currently it only checks calls to functions marked with
`#[rustc_lint_diagnostics]`. This commit changes it to check calls to
any function with an `impl Into<{D,Subd}iagMessage>` parameter. This
greatly improves its coverage and doesn't rely on people remembering to
add `#[rustc_lint_diagnostics]`.
The commit also adds `#[allow(rustc::untranslatable_diagnostic)`]
attributes to places that need it that are caught by the improved lint.
These places that might be easy to convert to translatable diagnostics.
Finally, it also:
- Expands and corrects some comments.
- Does some minor formatting improvements.
- Adds missing `DecorateLint` cases to
`tests/ui-fulldeps/internal-lints/diagnostics.rs`.
|
|
Signed-off-by: David Wood <david@davidtw.co>
|
|
|
|
|
|
|
|
|
|
Not the dropping of the trailing `s` -- this type describes a single
diagnostic and its name should be singular.
|
|
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
|
|
Adds initial support for DataFlowSanitizer to the Rust compiler. It
currently supports `-Zsanitizer-dataflow-abilist`. Additional options
for it can be passed to LLVM command line argument processor via LLVM
arguments using `llvm-args` codegen option (e.g.,
`-Cllvm-args=-dfsan-combine-pointer-labels-on-load=false`).
|
|
This means `DiagCtxtInner::emit_diagnostic` can return its result
directly, rather than having to modify a local variable.
|
|
I started by changing it to `DiagData`, but that didn't feel right.
`DiagInner` felt much better.
|
|
Unify dylib loading between proc macros and codegen backends
As bonus this makes the errors when failing to load a proc macro more informative to match the backend loading errors. In addition it makes it slightly easier to patch rustc to work on platforms that don't support dynamic linking like wasm.
|
|
Replace `abort_if_errors` calls that are certain to abort -- because
we emit an error immediately beforehand -- with `FatalErro.raise()`.
|
|
Because it's now simple enough that it doesn't provide much benefit.
|
|
Currently `emit_stashed_diagnostic` is called from four(!) different
places: `print_error_count`, `DiagCtxtInner::drop`, `abort_if_errors`,
and `compile_status`.
And `flush_delayed` is called from two different places:
`DiagCtxtInner::drop` and `Queries`.
This is pretty gross! Each one should really be called from a single
place, but there's a bunch of entanglements. This commit cleans up this
mess.
Specifically, it:
- Removes all the existing calls to `emit_stashed_diagnostic`, and adds
a single new call in `finish_diagnostics`.
- Removes the early `flush_delayed` call in `codegen_and_build_linker`,
replacing it with a simple early return if delayed bugs are present.
- Changes `DiagCtxtInner::drop` and `DiagCtxtInner::flush_delayed` so
they both assert that the stashed diagnostics are empty (i.e.
processed beforehand).
- Changes `interface::run_compiler` so that any errors emitted during
`finish_diagnostics` (i.e. late-emitted stashed diagnostics) are
counted and cannot be overlooked. This requires adding
`ErrorGuaranteed` return values to several functions.
- Removes the `stashed_err_count` call in `analysis`. This is possible
now that we don't have to worry about calling `flush_delayed` early
from `codegen_and_build_linker` when stashed diagnostics are pending.
- Changes the `span_bug` case in `handle_tuple_field_pattern_match` to a
`delayed_span_bug`, because it now can be reached due to the removal
of the `stashed_err_count` call in `analysis`.
- Slightly changes the expected output of three tests. If no errors are
emitted but there are delayed bugs, the error count is no longer
printed. This is because delayed bugs are now always printed after the
error count is printed (or not printed, if the error count is zero).
There is a lot going on in this commit. It's hard to break into smaller
pieces because the existing code is very tangled. It took me a long time
and a lot of effort to understand how the different pieces interact, and
I think the new code is a lot simpler and easier to understand.
|
|
Currently `has_errors` excludes lint errors. This commit changes it to
include lint errors.
The motivation for this is that for most places it doesn't matter
whether lint errors are included or not. But there are multiple places
where they must be includes, and only one place where they must not be
included. So it makes sense for `has_errors` to do the thing that fits
the most situations, and the new `has_errors_excluding_lint_errors`
method in the one exceptional place.
The same change is made for `err_count`. Annoyingly, this requires the
introduction of `err_count_excluding_lint_errs` for one place, to
preserve existing error printing behaviour. But I still think the change
is worthwhile overall.
|
