| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
Allow to feed a value in another query's cache and remove `WithOptConstParam`
I used it to remove `WithOptConstParam` queries, as an example.
The idea is that a query (here `typeck(function)`) can write into another query's cache (here `type_of(anon const)`). The dependency node for `type_of` would depend on all the current dependencies of `typeck`.
There is still an issue with cycles: if `type_of(anon const)` is accessed before `typeck(function)`, we will still have the usual cycle. The way around this issue is to `ensure` that `typeck(function)` is called before accessing `type_of(anon const)`.
When replayed, we may the following cases:
- `typeck` is green, in that case `type_of` is green too, and all is right;
- `type_of` is green, `typeck` may still be marked as red (it depends on strictly more things than `type_of`) -> we verify that the saved value and the re-computed value of `type_of` have the same hash;
- `type_of` is red, then `typeck` is red -> it's the caller responsibility to ensure `typeck` is recomputed *before* `type_of`.
As `anon consts` have their own `DefPathData`, it's not possible to have the def-id of the anon-const point to something outside the original function, but the general case may have to be resolved before using this device more broadly.
There is an open question about loading from the on-disk cache. If `typeck` is loaded from the on-disk cache, the side-effect does not happen. The regular `type_of` implementation can go and fetch the correct value from the decoded `typeck` results, and the dep-graph will check that the hashes match, but I'm not sure we want to rely on this behaviour.
I specifically allowed to feed the value to `type_of` from inside a call to `type_of`. In that case, the dep-graph will check that the fingerprints of both values match.
This implementation is still very sensitive to cycles, and requires that we call `typeck(function)` before `typeck(anon const)`. The reason is that `typeck(anon const)` calls `type_of(anon const)`, which calls `typeck(function)`, which feeds `type_of(anon const)`, and needs to build the MIR so needs `typeck(anon const)`. The latter call would not cycle, since `type_of(anon const)` has been set, but I'd rather not remove the cycle check.
|
|
Enable flatten-format-args by default.
Part of https://github.com/rust-lang/rust/issues/99012.
This enables the `flatten-format-args` feature that was added by https://github.com/rust-lang/rust/pull/106824:
> This change inlines string literals, integer literals and nested format_args!() into format_args!() during ast lowering, making all of the following pairs result in equivalent hir:
>
> ```rust
> println!("Hello, {}!", "World");
> println!("Hello, World!");
> ```
>
> ```rust
> println!("[info] {}", format_args!("error"));
> println!("[info] error");
> ```
>
> ```rust
> println!("[{}] {}", status, format_args!("error: {}", msg));
> println!("[{}] error: {}", status, msg);
> ```
>
> ```rust
> println!("{} + {} = {}", 1, 2, 1 + 2);
> println!("1 + 2 = {}", 1 + 2);
> ```
>
> And so on.
>
> This is useful for macros. E.g. a `log::info!()` macro could just pass the tokens from the user directly into a `format_args!()` that gets efficiently flattened/inlined into a `format_args!("info: {}")`.
>
> It also means that `dbg!(x)` will have its file, line, and expression name inlined:
>
> ```rust
> eprintln!("[{}:{}] {} = {:#?}", file!(), line!(), stringify!(x), x); // before
> eprintln!("[example.rs:1] x = {:#?}", x); // after
> ```
>
> Which can be nice in some cases, but also means a lot more unique static strings than before if dbg!() is used a lot.
This is mostly an optimization, except that it will be visible through [`fmt::Arguments::as_str()`](https://doc.rust-lang.org/nightly/std/fmt/struct.Arguments.html#method.as_str).
In https://github.com/rust-lang/rust/pull/106823, there was already a libs-api FCP about the documentation of `fmt::Arguments::as_str()` to allow it to give `Some` rather than `None` depending on optimizations like this. That was just a documentation update though. This PR is the one that actually makes the user visible change:
```rust
assert_eq!(format_args!("abc").as_str(), Some("abc")); // Unchanged.
assert_eq!(format_args!("ab{}", "c").as_str(), Some("abc")); // Was `None` before!
```
|
|
|
|
Fluent, with all the icu4x it brings in, takes quite some time to
compile. `fluent_messages!` is only needed in further downstream rustc
crates, but is blocking more upstream crates like `rustc_index`. By
splitting it out, we allow `rustc_macros` to be compiled earlier, which
speeds up `x check compiler` by about 5 seconds (and even more after the
needless dependency on `serde_json` is removed from
`rustc_data_structures`).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Check pattern refutability on THIR
The current `check_match` query is based on HIR, but partially re-lowers HIR into THIR.
This PR proposed to use the results of the `thir_body` query to check matches, instead of re-building THIR.
Most of the diagnostic changes are spans getting shorter, or commas/semicolons not getting removed.
This PR degrades the diagnostic for confusing constants in patterns (`let A = foo()` where `A` resolves to a `const A` somewhere): it does not point ot the definition of `const A` any more.
|
|
Avoid a few locks
We can use atomics or datastructures tuned for specific access patterns instead of locks. This may be an improvement for parallel rustc, but it's mostly a cleanup making various datastructures only usable in the way they are used right now (append data, never mutate), instead of having a general purpose lock.
|
|
Extend -Cdebuginfo with new options and named aliases
This is a rebase of https://github.com/rust-lang/rust/pull/83947, along with my best guess at what the new options mean. I tried to follow the LLVM source code to get a better idea but ran into quite a lot of trouble (https://rust-lang.zulipchat.com/#narrow/stream/187780-t-compiler.2Fwg-llvm/topic/go-to-definition.20in.20src.2Fllvm-project.3F). The description for the original PR follows below.
Note that the changes in this PR have already been through FCP: https://github.com/rust-lang/rust/pull/83947#issuecomment-878384979
Closes https://github.com/rust-lang/rust/pull/109311. Helps with https://github.com/rust-lang/rust/pull/104968.
r? `@michaelwoerister` cc `@cuviper`
---
The -Cdebuginfo=1 option was never line tables only and can't be due to backwards compatibility issues. This was clarified and an option for emitting line tables only was added. Additionally an option for emitting line info directives only was added, which is needed for some targets, i.e. nvptx. The debug info options should now behave similarly to clang's debug info options.
Fix https://github.com/rust-lang/rust/issues/60020
Fix https://github.com/rust-lang/rust/issues/64405
|
|
|
|
|
|
`-Cdebuginfo=1` was never line tables only and
can't be due to backwards compatibility issues.
This was clarified and an option for line tables only
was added. Additionally an option for line info
directives only was added, which is well needed for
some targets. The debug info options should now
behave the same as clang's debug info options.
|
|
Rename `with_source_map` as `set_source_map`. Because `with` functions
(e.g. `with_session_globals`, `scoped_tls::ScopedKey::with`) are for
*getting* a value for the duration of a closure, and `set` functions
(e.g. `set_session_globals_then` `scoped_tls::ScopedKey::with`) are for
*setting* a value for the duration of a closure.
Also fix up the comment, which is wrong:
- The bit about `TyCtxt` is wrong.
- `span_debug1` doesn't exist any more.
- There's only one level of fallback, not two.
(This is effectively a follow-up to the changes in #93936.)
Also add a comment explaining that `SessionGlobals::source_map` should
only be used when absolutely necessary.
|
|
Move items not part of this stabilization to 'lazy_cell' or 'once_cell_try'
|
|
Use Rayon's TLV directly
This accesses Rayon's `TLV` thread local directly avoiding wrapper functions. This makes rustc work with https://github.com/rust-lang/rustc-rayon/pull/10.
r? `@cuviper`
|
|
Make doc comment a little bit more accurate
It queries not LLVM in particular but the codegen backend *in general*. While cranelift does not provide target features, other codegen backends do.
Found while looking for [this answer](https://github.com/rust-lang/rust/issues/108680#issuecomment-1484324690).
|
|
It queries not LLVM in particular but the codegen backend *in general*.
While cranelift does not provide target features, other codegen backends do.
|
|
|
|
Add `try_canonicalize` to `rustc_fs_util` and use it over `fs::canonicalize`
This adds `try_canonicalize` which tries to call `fs::canonicalize`, but falls back to `std::path::absolute` if it fails. Existing `canonicalize` calls are replaced with it. `fs::canonicalize` is not guaranteed to work on Windows.
|
|
Add `-Z time-passes-format` to allow specifying a JSON output for `-Z time-passes`
This adds back the `-Z time` option as that is useful for [my rustc benchmark tool](https://github.com/Zoxc/rcb), reverting https://github.com/rust-lang/rust/pull/102725. It now uses nanoseconds and bytes as the units so it is renamed to `time-precise`.
|
|
It partially expands crate attributes before the main expansion pass (without modifying the crate), and the produced preliminary crate attribute list is used for querying a few attributes that are required very early.
Crate-level cfg attributes are then expanded normally during the main expansion pass, like attributes on any other nodes.
|
|
Also some more attributes are passed by reference.
|
|
|
|
time-passes`
|
|
|
|
|
|
|
|
Avoid unnecessary hashing
I noticed some stable hashing being done in a non-incremental build. It turns out that some of this is necessary to compute the crate hash, but some of it is not. Removing the unnecessary hashing is a perf win.
r? `@cjgillot`
|
|
This makes it easier to open the messages file while developing on features.
The commit was the result of automatted changes:
for p in compiler/rustc_*; do mv $p/locales/en-US.ftl $p/messages.ftl; rmdir $p/locales; done
for p in compiler/rustc_*; do sed -i "s#\.\./locales/en-US.ftl#../messages.ftl#" $p/src/lib.rs; done
|
|
Rollup of 9 pull requests
Successful merges:
- #104363 (Make `unused_allocation` lint against `Box::new` too)
- #106633 (Stabilize `nonzero_min_max`)
- #106844 (allow negative numeric literals in `concat!`)
- #108071 (Implement goal caching with the new solver)
- #108542 (Force parentheses around `match` expression in binary expression)
- #108690 (Place size limits on query keys and values)
- #108708 (Prevent overflow through Arc::downgrade)
- #108739 (Prevent the `start_bx` basic block in codegen from having two `Builder`s at the same time)
- #108806 (Querify register_tools and post-expansion early lints)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Querify register_tools and post-expansion early lints
The 2 extra queries correspond to code that happen before and after macro expansion, and don't need the resolver to exist.
|
|
This is fixed by simply using the currently registered target in the
current session. We need to use it because of target json that are not
by design included in the rustc list of targets.
|
|
The crate hash is needed:
- if debug assertions are enabled, or
- if incr. comp. is enabled, or
- if metadata is being generated, or
- if `-C instrumentation-coverage` is enabled.
This commit avoids computing the crate hash when these conditions are
all false, such as when doing a release build of a binary crate.
It uses `Option` to store the hashes when needed, rather than
computing them on demand, because some of them are needed in multiple
places and computing them on demand would make compilation slower.
The commit also removes `Owner::hash_without_bodies`. There is no
benefit to pre-computing that one, it can just be done in the normal
fashion.
|
|
|
|
|
|
|
|
Implement -Zlink-directives=yes/no
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a crate, so nothing is emitted into the crate's metadata. The assumption is that the build system already knows about the crate's native dependencies and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed by `-Zlink-native-libraries` (implemented in #70095). The latter is implemented at link time, which has the effect of ignoring `#[link]` in *every* crate. This makes it a very large hammer as it requires all native dependencies to be known to the build system to be at all usable, including those in sysroot libraries. I think this means its effectively unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
cc `@pcwalton` `@cramertj`
|
|
|
|
`-Zlink-directives=no` will ignored `#[link]` directives while compiling a
crate, so nothing is emitted into the crate's metadata. The assumption is
that the build system already knows about the crate's native dependencies
and can provide them at link time without these directives.
This is another way to address issue # #70093, which is currently addressed
by `-Zlink-native-libraries` (implemented in #70095). The latter is
implemented at link time, which has the effect of ignoring `#[link]`
in *every* crate. This makes it a very large hammer as it requires all
native dependencies to be known to the build system to be at all usable,
including those in sysroot libraries. I think this means its effectively
unused, and definitely under-used.
Being able to control this on a crate-by-crate basis should make it much
easier to apply when needed.
I'm not sure if we need both mechanisms, but we can decide that later.
|
|
errors: generate typed identifiers in each crate
Instead of loading the Fluent resources for every crate in `rustc_error_messages`, each crate generates typed identifiers for its own diagnostics and creates a static which are pulled together in the `rustc_driver` crate and provided to the diagnostic emitter.
There are advantages and disadvantages to this change..
#### Advantages
- Changing a diagnostic now only recompiles the crate for that diagnostic and those crates that depend on it, rather than `rustc_error_messages` and all crates thereafter.
- This approach can be used to support first-party crates that want to supply translatable diagnostics (e.g. `rust-lang/thorin` in https://github.com/rust-lang/rust/pull/102612#discussion_r985372582, cc `@JhonnyBillM)`
- We can extend this a little so that tools built using rustc internals (like clippy or rustdoc) can add their own diagnostic resources (much more easily than those resources needing to be available to `rustc_error_messages`)
#### Disadvantages
- Crates can only refer to the diagnostic messages defined in the current crate (or those from dependencies), rather than all diagnostic messages.
- `rustc_driver` (or some other crate we create for this purpose) has to directly depend on *everything* that has error messages.
- It already transitively depended on all these crates.
#### Pending work
- [x] I don't know how to make `rustc_codegen_gcc`'s translated diagnostics work with this approach - because `rustc_driver` can't depend on that crate and so can't get its resources to provide to the diagnostic emission. I don't really know how the alternative codegen backends are actually wired up to the compiler at all.
- [x] Update `triagebot.toml` to track the moved FTL files.
r? `@compiler-errors`
cc #100717
|
|
Extend `CodegenBackend` trait with a function returning the translation
resources from the codegen backend, which can be added to the complete
list of resources provided to the emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
Instead of loading the Fluent resources for every crate in
`rustc_error_messages`, each crate generates typed identifiers for its
own diagnostics and creates a static which are pulled together in the
`rustc_driver` crate and provided to the diagnostic emitter.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
Use a lock-free datastructure for source_span
follow up to the perf regression in https://github.com/rust-lang/rust/pull/105462
The main regression is likely the CStore, but let's evaluate the perf impact of this on its own
|
|
r=oli-obk
remove unstable `pick_stable_methods_before_any_unstable` flag
This flag was only added in #90329 in case there was any issue with the impl so that it would be easy to tell nightly users to use the flag to disable the new logic to fix their code. It's now been enabled for two years and also I can't find any issues corresponding to this new functionality? This flag made it way harder to understand how this code works so it would be nice to remove it and simplify what's going on.
cc `@nbdd0121`
r? `@oli-obk`
|
|
|
