about summary refs log tree commit diff
path: root/compiler/rustc_interface
AgeCommit message (Collapse)AuthorLines
2023-02-21Auto merge of #105462 - oli-obk:feeding_full, r=cjgillot,petrochenkovbors-60/+69
give the resolver access to TyCtxt The resolver is now created after TyCtxt is created. Then macro expansion and name resolution are run and the results fed into queries just like before this PR. Since the resolver had (before this PR) mutable access to the `CStore` and the source span table, these two datastructures are now behind a `RwLock`. To ensure that these are not mutated anymore after the resolver is done, a read lock to them is leaked right after the resolver finishes. ### PRs split out of this one and leading up to it: * https://github.com/rust-lang/rust/pull/105423 * https://github.com/rust-lang/rust/pull/105357 * https://github.com/rust-lang/rust/pull/105603 * https://github.com/rust-lang/rust/pull/106776 * https://github.com/rust-lang/rust/pull/106810 * https://github.com/rust-lang/rust/pull/106812 * https://github.com/rust-lang/rust/pull/108032
2023-02-20remove flagBoxy-1/+0
2023-02-20Remove some unnecessary tcx-passingOli Scherer-7/+4
2023-02-20Stop passing in values that one can also get from the tcx lazilyOli Scherer-7/+1
2023-02-20Move the resolver into a queryOli Scherer-28/+35
2023-02-20Make `configure_and_expand` "infalllible" by just aborting the compilation ↵Oli Scherer-15/+13
if it fails instead of bubbling out an error
2023-02-20Use tcx queries instead of passing the values to `configure_and_expand`.Oli Scherer-13/+8
2023-02-20Stuff a TyCtxt into the ResolverOli Scherer-2/+1
2023-02-20Run the resolver after TyCtxt constructionOli Scherer-38/+54
2023-02-20Make untracked.cstore lockable so that resolution can still write to it when ↵Oli Scherer-1/+4
using TyCtxt
2023-02-19Make public API, docs algorithm-agnosticJacob Pratt-1/+1
2023-02-16Remove save-analysis.Nicholas Nethercote-1/+0
Most tests involving save-analysis were removed, but I kept a few where the `-Zsave-analysis` was an add-on to the main thing being tested, rather than the main thing being tested. For `x.py install`, the `rust-analysis` target has been removed. For `x.py dist`, the `rust-analysis` target has been kept in a degenerate form: it just produces a single file `reduced.json` indicating that save-analysis has been removed. This is necessary for rustup to keep working. Closes #43606.
2023-02-14Simplify expansion logicOli Scherer-3/+3
2023-02-14Inline the expansion queryOli Scherer-28/+23
2023-02-14Remove BoxedResolverOli Scherer-102/+18
2023-02-14Separate the lifetime of the session and the arena in the resolverOli Scherer-4/+10
2023-02-13rustc_resolve: Remove `Resolver::clone_output`Vadim Petrochenkov-23/+10
And remove `Clone` impls and `Lrc`s that are no longer necessary
2023-02-10Rollup merge of #107831 - nnethercote:query-refactoring, r=oli-obkMatthias Krüger-35/+20
Query refactoring Just some cleanups I found when learning about the query system. Best reviewed one commit at a time. r? `@oli-obk`
2023-02-10Auto merge of #102963 - ilammy:xray-basic, r=estebankbors-0/+2
Add `-Z instrument-xray` flag Implement MCP https://github.com/rust-lang/compiler-team/issues/561, adding `-Z instrument-xray` flag which enables XRay instrumentation in LLVM.
2023-02-09Remove `QueryContext`.Nicholas Nethercote-34/+19
There is a type `QueryCtxt`, which impls the trait `QueryContext`. Confusingly, there is another type `QueryContext`. The latter is (like `TyCtxt`) just a pointer to a `GlobalContext`. It's not used much, e.g. its `impl` block has a single method. This commit removes `QueryContext`, replacing its use with direct `GlobalCtxt` use.
2023-02-09Simplify `tls::enter_context`.Nicholas Nethercote-2/+2
2023-02-09Parse "-Z instrument-xray" codegen optionOleksii Lozovskyi-0/+2
Recognize all bells and whistles that LLVM's XRay pass is capable of. The always/never settings are a bit dumb without attributes but they're still there. The default instruction count is chosen by the compiler, not LLVM pass. We'll do it later.
2023-02-07Replace a command line flag with an env var to allow tools to initialize the ↵Oli Scherer-1/+0
tracing loggers at their own discretion
2023-02-06remove unused importsklensy-1/+0
2023-02-05rustc_interface: remove huge error importsest31-18/+16
2023-01-30session: diagnostic migration lint on more fnsDavid Wood-18/+33
Apply the diagnostic migration lint to more functions on `Session`. Signed-off-by: David Wood <david.wood@huawei.com>
2023-01-29Auto merge of #106227 - bryangarza:ctfe-limit, r=oli-obkbors-0/+1
Use stable metric for const eval limit instead of current terminator-based logic This patch adds a `MirPass` that inserts a new MIR instruction `ConstEvalCounter` to any loops and function calls in the CFG. This instruction is used during Const Eval to count against the `const_eval_limit`, and emit the `StepLimitReached` error, replacing the current logic which uses Terminators only. The new method of counting loops and function calls should be more stable across compiler versions (i.e., not cause crates that compiled successfully before, to no longer compile when changes to the MIR generation/optimization are made). Also see: #103877
2023-01-27Compute generator saved locals on MIR.Camille GILLOT-0/+9
2023-01-23Replace terminator-based const eval limitBryan Garza-0/+1
- Remove logic that limits const eval based on terminators, and use the stable metric instead (back edges + fn calls) - Add unstable flag `tiny-const-eval-limit` to add UI tests that do not have to go up to the regular 2M step limit
2023-01-23Store the gctxt instead of fetching it twice.Oli Scherer-1/+1
2023-01-23Make `output_filenames` a real queryOli Scherer-27/+13
2023-01-23Remove another unneeded use of the resolverOli Scherer-19/+23
2023-01-20Auto merge of #106090 - WaffleLapkin:dereffffffffff, r=Nilstriebbors-4/+3
Remove some `ref` patterns from the compiler Previous PR: https://github.com/rust-lang/rust/pull/105368 r? `@Nilstrieb`
2023-01-17Don't call closures immediately, use `try{}` blocksMaybe Waffle-4/+3
2023-01-16Avoid one more call site to `Compiler::expansion`Oli Scherer-1/+1
2023-01-16Move compiler input and ouput paths into sessionOli Scherer-58/+42
2023-01-16Group some commonly passed together values into a structOli Scherer-52/+34
2023-01-16Remove redundant `input_path` field from `Config`Oli Scherer-5/+2
2023-01-16remove some arguments that can also be fed at the caller sideOli Scherer-34/+26
2023-01-16Remove `prepare_outputs`Oli Scherer-19/+9
2023-01-13Rollup merge of #106678 - Veykril:proc-macro-panic-abort, r=eholkMatthias Krüger-1/+12
Warn when using panic-strategy abort for proc-macro crates See https://github.com/rust-lang/rust/issues/82320, this simply warns for now as that seems like the best step that can be immediately taken (opposed to straight up rejecting or ignoring)
2023-01-13Rollup merge of #104645 - yukiomoto:log-backtrace-option, r=oli-obkMatthias Krüger-0/+1
Add log-backtrace option to show backtraces along with logging according to #90698, I added a compiler option, `-Zlog-backtrace=filter`, where `filter` is a module name, to show backtraces for logging without rebuilding. resolve #90698
2023-01-13Warn when using panic-strategy abort for proc-macro cratesLukas Wirth-1/+12
2023-01-12Feed the `features_query` instead of grabbing it from the session lazilyOli Scherer-0/+1
2023-01-12Remove `output_filenames` field from TyCtxt and feed the query insteadOli Scherer-1/+1
2023-01-12Remove `untracked_crate` field and instead pass it along with the resolver.Oli Scherer-2/+3
2023-01-12Feed `crate_name` queryOli Scherer-1/+2
2023-01-12Feed `resolutions` query instead of it being a thin wrapper around an ↵Oli Scherer-3/+3
untracked field
2023-01-12Harden the pre-tyctxt query system against accidental recomputationOli Scherer-48/+60
2023-01-12Add log-backtrace option to show backtraces along with loggingYuki Omoto-0/+1
generated by cgit-pink 1.4.1-3-g733a5 (git 2.37.1) at 2026-02-22 21:51:19 +0000