| Age | Commit message (Collapse) | Author | Lines |
|---|
|
r=compiler-errors
Point at private fields in struct literal
closes #95872
|
|
|
|
make cenum_impl_drop_cast deny-by-default
Also make it show up as future breakage diagnostic.
In https://github.com/rust-lang/rust/pull/96862 we are proposing to change behavior of those drops *again*, so this looks like a good opportunity to increase our pressure on getting them out of the ecosystem. Looking at the [tracking issue](https://github.com/rust-lang/rust/issues/73333), so far nobody spoke up in favor of this (accidental) feature.
Cc https://github.com/rust-lang/rust/issues/73333 `@oli-obk`
|
|
|
|
|
|
|
|
diagnostic
|
|
|
|
|
|
This makes the transition easier as e.g. allow directives
won't fire the unknown lint warning once it is turned to
warn by default in the future. This is especially
important compared to other lints in the unused group
because the _ prefix trick doesn't exist for macro rules,
so allowing is the only option (either of unused_macro_rules,
or of the entire unused group, but that is not as informative
to readers). Allowing the lint also makes it possible to work
on possible heuristics for disabling the macro in specific
cases.
|
|
Implement a lint to warn about unused macro rules
This implements a new lint to warn about unused macro rules (arms/matchers), similar to the `unused_macros` lint added by #41907 that warns about entire macros.
```rust
macro_rules! unused_empty {
(hello) => { println!("Hello, world!") };
() => { println!("empty") }; //~ ERROR: 1st rule of macro `unused_empty` is never used
}
fn main() {
unused_empty!(hello);
}
```
Builds upon #96149 and #96156.
Fixes #73576
|
|
Remove `#[rustc_deprecated]`
This removes `#[rustc_deprecated]` and introduces diagnostics to help users to the right direction (that being `#[deprecated]`). All uses of `#[rustc_deprecated]` have been converted. CI is expected to fail initially; this requires #95958, which includes converting `stdarch`.
I plan on following up in a short while (maybe a bootstrap cycle?) removing the diagnostics, as they're only intended to be short-term.
|
|
Begin fixing all the broken doctests in `compiler/`
Begins to fix #95994.
All of them pass now but 24 of them I've marked with `ignore HELP (<explanation>)` (asking for help) as I'm unsure how to get them to work / if we should leave them as they are.
There are also a few that I marked `ignore` that could maybe be made to work but seem less important.
Each `ignore` has a rough "reason" for ignoring after it parentheses, with
- `(pseudo-rust)` meaning "mostly rust-like but contains foreign syntax"
- `(illustrative)` a somewhat catchall for either a fragment of rust that doesn't stand on its own (like a lone type), or abbreviated rust with ellipses and undeclared types that would get too cluttered if made compile-worthy.
- `(not-rust)` stuff that isn't rust but benefits from the syntax highlighting, like MIR.
- `(internal)` uses `rustc_*` code which would be difficult to make work with the testing setup.
Those reason notes are a bit inconsistently applied and messy though. If that's important I can go through them again and try a more principled approach. When I run `rg '```ignore \(' .` on the repo, there look to be lots of different conventions other people have used for this sort of thing. I could try unifying them all if that would be helpful.
I'm not sure if there was a better existing way to do this but I wrote my own script to help me run all the doctests and wade through the output. If that would be useful to anyone else, I put it here: https://github.com/Elliot-Roberts/rust_doctest_fixing_tool
|
|
jackh726:remove-mutable_borrow_reservation_conflict-lint, r=nikomatsakis
Remove mutable_borrow_reservation_conflict lint and allow the code pattern
This was the only breaking issue with the NLL stabilization PR. Lang team decided to go ahead and allow this.
r? `@nikomatsakis`
Closes #59159
Closes #56254
|
|
Not fired yet.
|
|
|
|
|
|
|
|
r=compiler-errors
incr. comp.: Don't export impl_stable_hash_via_hash!() and warn about using it.
Fixes https://github.com/rust-lang/rust/issues/96013.
|
|
Remove `--extern-location` and all associated code
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
|
|
|
|
|
|
`--extern-location` was an experiment to investigate the best way to
generate useful diagnostics for unused dependency warnings by enabling a
build system to identify the corresponding build config.
While I did successfully use this, I've since been convinced the
alternative `--json unused-externs` mechanism is the way to go, and
there's no point in having two mechanisms with basically the same
functionality.
This effectively reverts https://github.com/rust-lang/rust/pull/72603
|
|
|
|
|
|
|
|
|
|
* split `fuzzy_provenance_casts` into a ptr2int and a int2ptr lint
* feature gate both lints
* update documentation to be more realistic short term
* add tests for these lints
|
|
ALL
OF
THEM
|
|
`MultiSpan` contains labels, which are more complicated with the
introduction of diagnostic translation and will use types from
`rustc_errors` - however, `rustc_errors` depends on `rustc_span` so
`rustc_span` cannot use types like `DiagnosticMessage` without
dependency cycles. Introduce a new `rustc_error_messages` crate that can
contain `DiagnosticMessage` and `MultiSpan`.
Signed-off-by: David Wood <david.wood@huawei.com>
|
|
This PR cleans up the rest of the spelling mistakes in the compiler comments. This PR does not change any literal or code spelling issues.
|
|
Signed-off-by: codehorseman <cricis@yeah.net>
|
|
Support other types of pluralization in pluralize macro
|
|
|
|
r=flip1995,wesleywiser
Improve `expect` impl and handle `#[expect(unfulfilled_lint_expectations)]` (RFC 2383)
This PR updates unstable `ExpectationIds` in stashed diagnostics and adds some asserts to ensure that the stored expectations are really empty in the end. Additionally, it handles the `#[expect(unfulfilled_lint_expectations)]` case.
According to the [Errors and lints docs](https://rustc-dev-guide.rust-lang.org/diagnostics.html#diagnostic-levels) the `error` level should only be used _"when the compiler detects a problem that makes it unable to compile the program"_. As this isn't the case with `#[expect(unfulfilled_lint_expectations)]` I decided to only create a warning. To avoid adding a new lint only for this case, I simply emit a `unfulfilled_lint_expectations` diagnostic with an additional note.
---
r? `@wesleywiser` I'm requesting a review from you since you reviewed the previous PR https://github.com/rust-lang/rust/pull/87835. You are welcome to reassign it if you're busy :upside_down_face:
rfc: [RFC-2383](https://rust-lang.github.io/rfcs/2383-lint-reasons.html)
tracking issue: https://github.com/rust-lang/rust/issues/85549
cc: `@flip1995` In case you're also interested in this :)
|
|
Treat unstable lints as unknown
This change causes unstable lints to be ignored if the `unknown_lints`
lint is allowed. To achieve this, it also changes lints to apply as soon
as they are processed. Previously, lints in the same set were processed
as a batch and then all simultaneously applied.
Implementation of https://github.com/rust-lang/compiler-team/issues/469
|
|
This updates the standard library's documentation to use the new syntax. The
documentation is worthwhile to update as it should be more idiomatic
(particularly for features like this, which are nice for users to get acquainted
with). The general codebase is likely more hassle than benefit to update: it'll
hurt git blame, and generally updates can be done by folks updating the code if
(and when) that makes things more readable with the new format.
A few places in the compiler and library code are updated (mostly just due to
already having been done when this commit was first authored).
|
|
|
|
|
|
This also affects the `non_exhaustive_omitted_patterns` and
`must_not_suspend` lints as they are not stable. This also changes the
diagnostic level to pull from `unknown_lints` instead of always being
allow or deny.
|
|
This change causes unstable lints to be ignored if the `unknown_lints`
lint is allowed. To achieve this, it also changes lints to apply as soon
as they are processed. Previously, lints in the same set were processed
as a batch and then all simultaneously applied.
Implementation of https://github.com/rust-lang/compiler-team/issues/469
|
|
|
|
|
|
|
|
|
|
|
|
* Add test to expect and the forbid a lint (RFC 2383)
|
|
|
|
|
|
* Collect lint expectations and set expectation ID in level (RFC-2383)
* Collect IDs of fulfilled lint expectations from diagnostics (RFC 2383)
|
