| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Removes a piece of mutable state.
Follow up to #114578.
|
|
|
|
|
|
|
|
|
|
|
|
This reverts commit 557359f92512ca88b62a602ebda291f17a953002, reversing
changes made to 1e6c09a803fd543a98bfbe1624d697a55300a786.
|
|
|
|
|
|
Use u64 for incr comp allocation offsets
Fixes https://github.com/rust-lang/rust/issues/76037
Fixes https://github.com/rust-lang/rust/issues/95780
Fixes https://github.com/rust-lang/rust/issues/111613
These issues are all reporting ICEs caused by using `u32` to store offsets to allocations in the incremental compilation cache. This PR aims to lift that limitation by changing the offset type in question to `u64`.
There are two perf runs in this PR. The first reports a regression, and the second does not. The changes are the same in both. I rebased the PR then did the second perf run because I noticed that the primary regression in it was very commonly seen in spurious regression reports.
I do not know what the perf run will report when this is merged. I would not be surprised to see regression or neutral, but the cachegrind diffs for the regression point at `try_mark_previous_green` which is a common source of inexplicable regressions and I don't think should be perturbed by this PR.
I'm not opposed to adding a regression test such as
```rust
fn main() {
println!("{}", [37; 1 << 30].len());
}
```
But that program takes 1 minute to compile and consumes 4.6 GB of memory then writes that much to disk. Is that a concerning amount of resource use for a test?
r? `@nnethercote`
|
|
|
|
Make it clearer that we're just checking for an RPITIT
Tiny nit to use `is_impl_trait_in_trait` more, to make it clearer that we're just checking whether a def-id is an RPITIT, rather than doing something meaningful with the `opt_rpitit_info`.
r? `@spastorino`
|
|
|
|
|
|
|
|
|
|
Make RPITITs assume/require their parent method's predicates
Removes a FIXME from the `param_env` query where we were manually adding the parent function's predicates to the RPITIT's assumptions.
r? `@spastorino`
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Closures do not have a `fn_sig`, so no reason to encode one.
|
|
|
|
|
|
open coded
|
|
|
|
Remember names of `cfg`-ed out items to mention them in diagnostics
# Examples
## `serde::Deserialize` without the `derive` feature (a classic beginner mistake)
I had to slightly modify serde so that it uses explicit re-exports instead of a glob re-export. (Update: a serde PR was merged that adds the manual re-exports)
```
error[E0433]: failed to resolve: could not find `Serialize` in `serde`
--> src/main.rs:1:17
|
1 | #[derive(serde::Serialize)]
| ^^^^^^^^^ could not find `Serialize` in `serde`
|
note: crate `serde` has an item named `Serialize` but it is inactive because its cfg predicate evaluated to false
--> /home/gh-Nilstrieb/.cargo/registry/src/index.crates.io-6f17d22bba15001f/serde-1.0.160/src/lib.rs:343:1
|
343 | #[cfg(feature = "serde_derive")]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
344 | pub use serde_derive::{Deserialize, Serialize};
| ^^^^^^^^^
= note: the item is gated behind the `serde_derive` feature
= note: see https://doc.rust-lang.org/cargo/reference/features.html for how to activate a crate's feature
```
(the suggestion is not ideal but that's serde's fault)
I already tested the metadata size impact locally by compiling the `windows` crate without any features. `800k` -> `809k`
r? `@ghost`
|
|
|
|
`#[cfg]`s are frequently used to gate crate content behind cargo
features. This can lead to very confusing errors when features are
missing. For example, `serde` doesn't have the `derive` feature by
default. Therefore, `serde::Serialize` fails to resolve with a generic
error, even though the macro is present in the docs.
This commit adds a list of all stripped item names to metadata. This is
filled during macro expansion and then, through a fed query, persisted
in metadata. The downstream resolver can then access the metadata to
look at possible candidates for mentioning in the errors.
This slightly increases metadata (800k->809k for the feature-heavy
windows crate), but not enough to really matter.
|
|
|
|
notriddle:notriddle/silence-private-dep-trait-impl-suggestions, r=cjgillot
diagnostics: exclude indirect private deps from trait impl suggest
Fixes #88696
|
|
`EarlyBinder::new` -> `EarlyBinder::bind`
for consistency with `Binder::bind`. it may make sense to also add `EarlyBinder::dummy` in places where we know that no parameters exist, but I left that out of this PR.
r? `@jackh726` `@kylematsuda`
|
|
|
|
Load only the crate header for `locator::crate_matches`
Previously, we used the following info to determine whether to load the crate:
1. The METADATA_HEADER, which includes a METADATA_VERSION constant
2. The embedded rustc version
3. Various metadata in the `CrateRoot`, including the SVH
This worked ok most of the time. Unfortunately, when building locally the rustc version is always
the same because `omit-git-hash` is on by default. That meant that we depended only on 1 and 3, and
we are not very good about bumping METADATA_VERSION (it's currently at 7) so in practice we were
only depending on 3. `CrateRoot` is a very large struct and changes somewhat regularly, so this led
to a steady stream of crashes from trying to load it.
Change the logic to add an intermediate step between 2 and 3: introduce a new `CrateHeader` struct
that contains only the minimum info needed to decide whether the crate should be loaded or not. That
avoids having to load all of `CrateRoot`, which in practice means we should crash much less often.
Note that this works because the SVH should be different between any two dependencies, even if the
compiler has changed, because we use `-Zbinary-dep-depinfo` in bootstrap. See
https://github.com/rust-lang/rust/pull/111329#issuecomment-1538303474 for more details about how the
original crash happened.
|
|
|
|
Previously, we used the following info to determine whether to load the crate:
1. The METADATA_HEADER, which includes a METADATA_VERSION constant
2. The embedded rustc version
3. Various metadata in the `CrateRoot`, including the SVH
This worked ok most of the time. Unfortunately, when building locally the rustc version is always
the same because `omit-git-hash` is on by default. That meant that we depended only on 1 and 3, and
we are not very good about bumping METADATA_VERSION (it's currently at 7) so in practice we were
only depending on 3. `CrateRoot` is a very large struct and changes somewhat regularly, so this led
to a steady stream of crashes from trying to load it.
Change the logic to add an intermediate step between 2 and 3: introduce a new `CrateHeader` struct
that contains only the minimum info needed to decide whether the crate should be loaded or not. That
avoids having to load all of `CrateRoot`, which in practice means we should crash much less often.
Note that this works because the SVH should be different between any two dependencies, even if the
compiler has changed, because we use `-Zbinary-dep-depinfo` in bootstrap. See
https://github.com/rust-lang/rust/pull/111329#issuecomment-1538303474 for more details about how the
original crash happened.
|
|
|
|
r=compiler-errors
Rename `traits_in_crate` query to `traits`
> NOTE: Not named just `traits` due to a naming conflict.
This can, in fact, be easily avoided.
|
|
|
|
Fix dependency tracking for debugger visualizers
This PR fixes dependency tracking for debugger visualizer files by changing the `debugger_visualizers` query to an `eval_always` query that scans the AST while it is still available. This way the set of visualizer files is already available when dep-info is emitted. Since the query is turned into an `eval_always` query, dependency tracking will now reliably detect changes to the visualizer script files themselves.
TODO:
- [x] perf.rlo
- [x] Needs a bit more documentation in some places
- [x] Needs regression test for the incr. comp. case
Fixes https://github.com/rust-lang/rust/issues/111226
Fixes https://github.com/rust-lang/rust/issues/111227
Fixes https://github.com/rust-lang/rust/issues/111295
r? `@wesleywiser`
cc `@gibbyfree`
|
|
Only depend on CFG_VERSION in rustc_interface
This avoids having to rebuild the whole compiler on each commit when `omit-git-hash = false`.
cc https://github.com/rust-lang/rust/issues/76720 - this won't fix it, and I'm not suggesting we turn this on by default, but it will make it less painful for people who do have `omit-git-hash` on as a workaround.
|
|
this avoids having to rebuild the whole compiler on each commit when
`omit-git-hash = false`.
|
|
|
|
Handle error body in generator layout
Fixes #111468
I feel like making this query return `Option<GeneratorLayout>` might be better but had some issues with that approach
|
|
|
|
|
