| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Use `&IndexSlice` instead of `&IndexVec` where possible
All the same reasons as for `[T]`: more general, less pointer chasing, and `&mut IndexSlice` emphasizes that it doesn't change *length*.
r? `@ghost`
|
|
|
|
All the same reasons as for `[T]`: more general, less pointer chasing, and `&mut IndexSlice` emphasizes that it doesn't change *length*.
|
|
Use `FieldIdx` in various things related to aggregates
Shrank `AggregateKind` by 8 bytes on x64, since the active field of a union is tracked as an `Option<FieldIdx>` instead of `Option<usize>`.
Part 3/? of https://github.com/rust-lang/compiler-team/issues/606
[`IndexSlice`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_index/vec/struct.IndexVec.html#deref-methods-IndexSlice%3CI,+T%3E) was added in https://github.com/rust-lang/rust/pull/109787
|
|
Shrank `AggregateKind` by 8 bytes on x64, since the active field of a union is tracked as an `Option<FieldIdx>` instead of `Option<usize>`.
|
|
|
|
|
|
Insert alignment checks for pointer dereferences when debug assertions are enabled
Closes https://github.com/rust-lang/rust/issues/54915
- [x] Jake tells me this sounds like a place to use `MirPatch`, but I can't figure out how to insert a new basic block with a new terminator in the middle of an existing basic block, using `MirPatch`. (if nobody else backs up this point I'm checking this as "not actually a good idea" because the code looks pretty clean to me after rearranging it a bit)
- [x] Using `CastKind::PointerExposeAddress` is definitely wrong, we don't want to expose. Calling a function to get the pointer address seems quite excessive. ~I'll see if I can add a new `CastKind`.~ `CastKind::Transmute` to the rescue!
- [x] Implement a more helpful panic message like slice bounds checking.
r? `@oli-obk`
|
|
Update `ty::VariantDef` to use `IndexVec<FieldIdx, FieldDef>`
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
|
|
r=lcnr
numeric vars can only be unified with numerical types in deep reject
Don't consider numeric vars (int and float vars) to unify with non-numeric types during deep reject. This helps us reject incompatible impls sooner.
|
|
Rollup of 6 pull requests
Successful merges:
- #109347 (Skip no_mangle if the item has no name.)
- #109522 (Implement current_dll_path for AIX)
- #109679 (Freshen normalizes-to hack goal RHS in the evaluate loop)
- #109704 (resolve: Minor improvements to effective visibilities)
- #109739 (Closures always implement `FnOnce` in new solver)
- #109758 (Parallel compiler cleanups)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
resolve: Minor improvements to effective visibilities
See individual commits.
|
|
compiler-errors:new-solver-deep-reject-placeholder-consts, r=lcnr
Don't ICE on placeholder consts in deep reject
Since we canonicalize const params into placeholder consts, we need to be able to handle them during deep reject.
r? `@lcnr` (though maybe `@oli-obk` can look at this one too, if he wants 😸)
Fixes compiler-errors/next-solver-hir-issues#10
|
|
And while doing the updates for that, also uses `FieldIdx` in `ProjectionKind::Field` and `TypeckResults::field_indices`.
There's more places that could use it (like `rustc_const_eval` and `LayoutS`), but I tried to keep this PR from exploding to *even more* places.
Part 2/? of https://github.com/rust-lang/compiler-team/issues/606
|
|
Partial stabilization of `once_cell`
This PR aims to stabilize a portion of the `once_cell` feature:
- `core::cell::OnceCell`
- `std::cell::OnceCell` (re-export of the above)
- `std::sync::OnceLock`
This will leave `LazyCell` and `LazyLock` unstabilized, which have been moved to the `lazy_cell` feature flag.
Tracking issue: https://github.com/rust-lang/rust/issues/74465 (does not fully close, but it may make sense to move to a new issue)
Future steps for separate PRs:
- ~~Add `#[inline]` to many methods~~ #105651
- Update cranelift usage of the `once_cell` crate
- Update rust-analyzer usage of the `once_cell` crate
- Update error messages discussing once_cell
## To be stabilized API summary
```rust
// core::cell (in core/cell/once.rs)
pub struct OnceCell<T> { .. }
impl<T> OnceCell<T> {
pub const fn new() -> OnceCell<T>;
pub fn get(&self) -> Option<&T>;
pub fn get_mut(&mut self) -> Option<&mut T>;
pub fn set(&self, value: T) -> Result<(), T>;
pub fn get_or_init<F>(&self, f: F) -> &T where F: FnOnce() -> T;
pub fn into_inner(self) -> Option<T>;
pub fn take(&mut self) -> Option<T>;
}
impl<T: Clone> Clone for OnceCell<T>;
impl<T: Debug> Debug for OnceCell<T>
impl<T> Default for OnceCell<T>;
impl<T> From<T> for OnceCell<T>;
impl<T: PartialEq> PartialEq for OnceCell<T>;
impl<T: Eq> Eq for OnceCell<T>;
```
```rust
// std::sync (in std/sync/once_lock.rs)
impl<T> OnceLock<T> {
pub const fn new() -> OnceLock<T>;
pub fn get(&self) -> Option<&T>;
pub fn get_mut(&mut self) -> Option<&mut T>;
pub fn set(&self, value: T) -> Result<(), T>;
pub fn get_or_init<F>(&self, f: F) -> &T where F: FnOnce() -> T;
pub fn into_inner(self) -> Option<T>;
pub fn take(&mut self) -> Option<T>;
}
impl<T: Clone> Clone for OnceLock<T>;
impl<T: Debug> Debug for OnceLock<T>;
impl<T> Default for OnceLock<T>;
impl<#[may_dangle] T> Drop for OnceLock<T>;
impl<T> From<T> for OnceLock<T>;
impl<T: PartialEq> PartialEq for OnceLock<T>
impl<T: Eq> Eq for OnceLock<T>;
impl<T: RefUnwindSafe + UnwindSafe> RefUnwindSafe for OnceLock<T>;
unsafe impl<T: Send> Send for OnceLock<T>;
unsafe impl<T: Sync + Send> Sync for OnceLock<T>;
impl<T: UnwindSafe> UnwindSafe for OnceLock<T>;
```
No longer planned as part of this PR, and moved to the `rust_cell_try` feature gate:
```rust
impl<T> OnceCell<T> {
pub fn get_or_try_init<F, E>(&self, f: F) -> Result<&T, E> where F: FnOnce() -> Result<T, E>;
}
impl<T> OnceLock<T> {
pub fn get_or_try_init<F, E>(&self, f: F) -> Result<&T, E> where F: FnOnce() -> Result<T, E>;
}
```
I am new to this process so would appreciate mentorship wherever needed.
|
|
|
|
|
|
Move items not part of this stabilization to 'lazy_cell' or 'once_cell_try'
|
|
Move `mir::Field` → `abi::FieldIdx`
The first PR for https://github.com/rust-lang/compiler-team/issues/606
This is just the move-and-rename, because it's plenty big already. Future PRs will start using `FieldIdx` more broadly, and concomitantly removing `FieldIdx::new`s.
|
|
Support TLS access into dylibs on Windows
This allows access to `#[thread_local]` in upstream dylibs on Windows by introducing a MIR shim to return the address of the thread local. Accesses that go into an upstream dylib will call the MIR shim to get the address of it.
`convert_tls_rvalues` is introduced in `rustc_codegen_ssa` which rewrites MIR TLS accesses to dummy calls which are replaced with calls to the MIR shims when the dummy calls are lowered to backend calls.
A new `dll_tls_export` target option enables this behavior with a `false` value which is set for Windows platforms.
This fixes https://github.com/rust-lang/rust/issues/84933.
|
|
Make init mask lazy for fully initialized/uninitialized const allocations
There are a few optimization opportunities in the `InitMask` and related const `Allocation`s (e.g. by taking advantage of the fact that it's a bitset that represents initialization, which is often entirely initialized or uninitialized in a single call, or gradually built up, etc).
There's a few overwrites to the same state, multiple writes in a row to the same indices, the RLE scheme for `memcpy` doesn't always compress, etc.
Here, we start with:
- avoiding materializing the bitset's blocks if the allocation is fully initialized/uninitialized
- dealloc blocks when fully overwriting, including when participating in `memcpy`s
- take care of the fixme about allocating blocks of 0s before overwriting them to the expected value
- expanding unit test coverage of the init mask
This should be most visible on benchmarks and crates where const allocations dominate the runtime (like `ctfe-stress-5` of course), but I was especially looking at the worst cases from #93215.
This first change allows the majority of `set_range` calls to stay with a lazy init mask when bootstrapping rustc (not that the init mask is a big part of the process in cpu time or memory usage).
r? `@oli-obk`
I have another in-progress branch where I'll switch the singular initialized/uninitialized value to a watermark, recording the point after which everything is uninitialized. That will take care of cases where full initialization is monotonic and done in multiple steps (e.g. an array of a type without padding), which should then allow the vast majority of const allocations' init masks to stay lazy during bootstrapping (though interestingly I've seen such gradual initialization in both left-to-right and right-to-left directions, and I don't think a single watermark can handle both).
|
|
|
|
The first PR for https://github.com/rust-lang/compiler-team/issues/606
This is just the move-and-rename, because it's plenty big-and-bitrotty already. Future PRs will start using `FieldIdx` more broadly, and concomitantly removing `FieldIdx::new`s.
|
|
It has a single callsite.
|
|
It factors out a repeated code pattern.
|
|
It helped to reuse `update_def` for the crate root, but it created confusion and caused some mistakes when I implemented #109500
|
|
Rollup of 8 pull requests
Successful merges:
- #91793 (socket ancillary data implementation for FreeBSD (from 13 and above).)
- #92284 (Change advance(_back)_by to return the remainder instead of the number of processed elements)
- #102472 (stop special-casing `'static` in evaluation)
- #108480 (Use Rayon's TLV directly)
- #109321 (Erase impl regions when checking for impossible to eagerly monomorphize items)
- #109470 (Correctly substitute GAT's type used in `normalize_param_env` in `check_type_bounds`)
- #109562 (Update ar_archive_writer to 0.1.3)
- #109629 (remove obsolete `givens` from regionck)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Move tests and limit the init mask's structures/fields visibility.
|
|
Use Rayon's TLV directly
This accesses Rayon's `TLV` thread local directly avoiding wrapper functions. This makes rustc work with https://github.com/rust-lang/rustc-rayon/pull/10.
r? `@cuviper`
|
|
|
|
|
|
Avoid materializing bits in the InitMask bitset when a single value
would be enough: when the mask represents a fully initialized or fully
uninitialized const allocation.
|
|
|
|
|
|
Refactor: `VariantIdx::from_u32(0)` -> `FIRST_VARIANT`
Since structs are always `VariantIdx(0)`, there's a bunch of files where the only reason they had `VariantIdx` or `vec::Idx` imported at all was to get the first variant.
So this uses a constant for that, and adds some doc-comments to `VariantIdx` while I'm there, since [it doesn't have any today](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_target/abi/struct.VariantIdx.html).
|
|
Since structs are always `VariantIdx(0)`, there's a bunch of files where the only reason they had `VariantIdx` or `vec::Idx` imported at all was to get the first variant.
So this uses a constant for that, and adds some doc-comments to `VariantIdx` while I'm there, since it doesn't have any today.
|
|
|
|
|
|
|
|
Rollup of 9 pull requests
Successful merges:
- #108629 (rustdoc: add support for type filters in arguments and generics)
- #108924 (panic_immediate_abort requires abort as a panic strategy)
- #108961 (Refine error spans for const args in hir typeck)
- #108986 (sync LVI tests)
- #109142 (Add block-based mutex unlocking example)
- #109368 (fix typo in the creation of OpenOption for RustyHermit)
- #109493 (Return nested obligations from canonical response var unification)
- #109515 (Add AixLinker to support linking on AIX)
- #109536 (resolve: Rename some cstore methods to match queries and add comments)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Refine error spans for const args in hir typeck
Improve just a couple of error messages having to do with mismatched consts.
r? `@ghost` i'll put this up when the dependent commits are merged
|
|
Don't pass `TreatProjections` separately to `fast_reject`
Don't pass `TreatProjections` separately to `fast_reject`, and instead use the original approach of switching on two variants of `TreatParams` (undoes this: https://github.com/rust-lang/rust/pull/108830#pullrequestreview-1330371417).
Fixes the regression introduced in https://github.com/rust-lang/rust/pull/108830#issuecomment-1468116419
|
|
|
|
|
|
|
|
Add `CastKind::Transmute` to MIR
~~Nothing actually produces it in this commit, so I don't know how to test it, but it also means it shouldn't be possible for it to break anything.~~
Includes lowering `transmute` calls to it, so it's used.
Zulip Conversation: <https://rust-lang.zulipchat.com/#narrow/stream/189540-t-compiler.2Fwg-mir-opt/topic/Good.20first.20isssue/near/321849610>
|
|
rustc_interface: Add a new query `pre_configure`
It partially expands crate attributes before the main expansion pass (without modifying the crate), and the produced preliminary crate attribute list is used for querying a few attributes that are required very early.
Crate-level cfg attributes on the crate itself are then expanded normally during the main expansion pass, like attributes on any other nodes.
This is a continuation of https://github.com/rust-lang/rust/pull/92473 and one more step to very unstable crate-level proc macro attributes maybe actually working.
Previously crate attributes were pre-configured simultaneously with feature extraction, and then written directly into `ast::Crate`.
|
|
Rollup of 7 pull requests
Successful merges:
- #108541 (Suppress `opaque_hidden_inferred_bound` for nested RPITs)
- #109137 (resolve: Querify most cstore access methods (subset 2))
- #109380 (add `known-bug` test for unsoundness issue)
- #109462 (Make alias-eq have a relation direction (and rename it to alias-relate))
- #109475 (Simpler checked shifts in MIR building)
- #109504 (Stabilize `arc_into_inner` and `rc_into_inner`.)
- #109506 (make param bound vars visibly bound vars with -Zverbose)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
It partially expands crate attributes before the main expansion pass (without modifying the crate), and the produced preliminary crate attribute list is used for querying a few attributes that are required very early.
Crate-level cfg attributes are then expanded normally during the main expansion pass, like attributes on any other nodes.
|
|
r=compiler-errors
make param bound vars visibly bound vars with -Zverbose
I was trying to debug some type/const bound var stuff and it was shockingly tricky due to the fact that even with `-Zverbose` enabled the `T` in `for<T> T: Trait` prints as `T` making it seem like its `TyKind::Param` when it is infact `TyKind::Bound`. This PR "fixes" this when `-Zverbose` is set to allow rendering it as `^T` or `^1_T` depending on binder depth.
r? ```@compiler-errors```
|
