| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Rollup of 6 pull requests
Successful merges:
- #96868 (Stabilize explicit_generic_args_with_impl_trait)
- #97703 (some additional `need_type_info.rs` cleanup)
- #97812 (Suggest to swap a struct and a trait in trait impls)
- #97958 (ExitStatus docs fixups)
- #97967 (Mention `infer::Trace` methods on `infer::At` methods' docs)
- #97972 (Update #[doc(html_playground_url)] documentation to mention what the request will be)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
some additional `need_type_info.rs` cleanup
also fixes #97698, fixes #97806
cc `@estebank`
|
|
Revert part of #94372 to improve performance
#94732 was supposed to give small but widespread performance improvements, as judged from three per-merge performance runs. But the performance run that occurred after merging included a roughly equal number of improvements and regressions, for unclear reasons.
This PR is for a test run reverting those changes, to see what happens.
r? `@ghost`
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
use precise spans for recursive const evaluation
This fixes https://github.com/rust-lang/rust/issues/73283 by using a `TyCtxtAt` with a more precise span when the interpreter recursively calls itself. Hopefully such calls are sufficiently rare that this does not cost us too much performance.
(In theory, cycles can also arise through layout computation, as layout can depend on consts -- but layout computation happens all the time so we'd have to do something to not make this terrible for performance.)
|
|
|
|
|
|
Make `Encodable` and `Encoder` infallible.
A follow-up to #93066.
r? `@ghost`
|
|
|
|
|
|
it feels arbitrary to have `Ty` and `Const` directly
in that module and to not have `GenericArg` and
`GenericArgKind` there. Writing `ty::GenericArg`
can also feel clearer than importing it. Using
`ty::subst::GenericArg` however is ugly.
|
|
Rollup of 5 pull requests
Successful merges:
- #97595 (Remove unwrap from get_vtable)
- #97597 (Preserve unused pointer to address casts)
- #97819 (Recover `import` instead of `use` in item)
- #97823 (Recover missing comma after match arm)
- #97851 (Use repr(C) when depending on struct layout in ptr tests)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
r=RalfJung,JakobDegen
Preserve unused pointer to address casts
Fixes #97421.
cc `@RalfJung`
|
|
Folding revamp
r? `@ghost`
|
|
This avoids the name clash with `rustc_serialize::Encoder` (a trait),
and allows lots qualifiers to be removed and imports to be simplified
(e.g. fewer `as` imports).
|
|
This commit makes type folding more like the way chalk does it.
Currently, `TypeFoldable` has `fold_with` and `super_fold_with` methods.
- `fold_with` is the standard entry point, and defaults to calling
`super_fold_with`.
- `super_fold_with` does the actual work of traversing a type.
- For a few types of interest (`Ty`, `Region`, etc.) `fold_with` instead
calls into a `TypeFolder`, which can then call back into
`super_fold_with`.
With the new approach, `TypeFoldable` has `fold_with` and
`TypeSuperFoldable` has `super_fold_with`.
- `fold_with` is still the standard entry point, *and* it does the
actual work of traversing a type, for all types except types of
interest.
- `super_fold_with` is only implemented for the types of interest.
Benefits of the new model.
- I find it easier to understand. The distinction between types of
interest and other types is clearer, and `super_fold_with` doesn't
exist for most types.
- With the current model is easy to get confused and implement a
`super_fold_with` method that should be left defaulted. (Some of the
precursor commits fixed such cases.)
- With the current model it's easy to call `super_fold_with` within
`TypeFolder` impls where `fold_with` should be called. The new
approach makes this mistake impossible, and this commit fixes a number
of such cases.
- It's potentially faster, because it avoids the `fold_with` ->
`super_fold_with` call in all cases except types of interest. A lot of
the time the compile would inline those away, but not necessarily
always.
|
|
We already have `visit_unevaluated`, so this improves consistency.
Also, define `TypeFoldable for Unevaluated<'tcx, ()>` in terms of
`TypeFoldable for Unevaluated<'tcx>`, which is neater.
|
|
Because `TypeFoldable::try_fold_mir_const` exists, and even though
`visit_mir_const` isn't needed right now, the consistency makes the code
easier to understand.
|
|
For most types the default impls of these methods are good enough, and
`EarlyBinder` is one such type.
|
|
Because it's equivalent but simpler to what's currently there.
|
|
To match the corresponding type name.
|
|
There are two impls of the `Encoder` trait: `opaque::Encoder` and
`opaque::FileEncoder`. The former encodes into memory and is infallible, the
latter writes to file and is fallible.
Currently, standard `Result`/`?`/`unwrap` error handling is used, but this is a
bit verbose and has non-trivial cost, which is annoying given how rare failures
are (especially in the infallible `opaque::Encoder` case).
This commit changes how `Encoder` fallibility is handled. All the `emit_*`
methods are now infallible. `opaque::Encoder` requires no great changes for
this. `opaque::FileEncoder` now implements a delayed error handling strategy.
If a failure occurs, it records this via the `res` field, and all subsequent
encoding operations are skipped if `res` indicates an error has occurred. Once
encoding is complete, the new `finish` method is called, which returns a
`Result`. In other words, there is now a single `Result`-producing method
instead of many of them.
This has very little effect on how any file errors are reported if
`opaque::FileEncoder` has any failures.
Much of this commit is boring mechanical changes, removing `Result` return
values and `?` or `unwrap` from expressions. The more interesting parts are as
follows.
- serialize.rs: The `Encoder` trait gains an `Ok` associated type. The
`into_inner` method is changed into `finish`, which returns
`Result<Vec<u8>, !>`.
- opaque.rs: The `FileEncoder` adopts the delayed error handling
strategy. Its `Ok` type is a `usize`, returning the number of bytes
written, replacing previous uses of `FileEncoder::position`.
- Various methods that take an encoder now consume it, rather than being
passed a mutable reference, e.g. `serialize_query_result_cache`.
|
|
|
|
Fix precise field capture of univariant enums
When constructing a MIR from a THIR field expression, introduce an
additional downcast projection before accessing a field of an enum.
When rebasing a place builder on top of a captured place, account for
the fact that a single HIR enum field projection corresponds to two MIR
projection elements: a downcast element and a field element.
Fixes #95271.
Fixes #96299.
Fixes #96512.
Fixes #97378.
r? ``@nikomatsakis`` ``@arora-aman``
|
|
Rollup of 5 pull requests
Successful merges:
- #97058 (Various refactors to the incr comp workproduct handling)
- #97301 (Allow unstable items to be re-exported unstably without requiring the feature be enabled)
- #97738 (Fix ICEs from zsts within unsized types with non-zero offsets)
- #97771 (Remove SIGIO reference on Haiku)
- #97808 (Add some unstable target features for the wasm target codegen)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Allow unstable items to be re-exported unstably without requiring the feature be enabled
Closes #94972
The diagnostic may need some work still, and I haven't added a test yet
|
|
Various refactors to the incr comp workproduct handling
This is the result of me looking into adding support for having multiple object files for a single codegen unit to incr comp. This is necessary to support inline assembly in cg_clif without requiring partial linking which is not supported on Windows and seems to fail on macOS for some reason. Cg_clif uses an external assembler to handle inline asm and thus produces one object file with regular functions and one object file containing compiled inline asm for each codegen unit which uses inline asm. Current incr comp can't handle this. This PR doesn't yet add support for this, but it makes it easier to do so.
|
|
Add support for emitting functions with `coldcc` to LLVM
The eventual goal is to try using this for things like the internal panicking stuff, to see whether it helps.
|
|
Remove migrate borrowck mode
Closes #58781
Closes #43234
# Stabilization proposal
This PR proposes the stabilization of `#![feature(nll)]` and the removal of `-Z borrowck`. Current borrow checking behavior of item bodies is currently done by first infering regions *lexically* and reporting any errors during HIR type checking. If there *are* any errors, then MIR borrowck (NLL) never occurs. If there *aren't* any errors, then MIR borrowck happens and any errors there would be reported. This PR removes the lexical region check of item bodies entirely and only uses MIR borrowck. Because MIR borrowck could never *not* be run for a compiled program, this should not break any programs. It does, however, change diagnostics significantly and allows a slightly larger set of programs to compile.
Tracking issue: #43234
RFC: https://github.com/rust-lang/rfcs/blob/master/text/2094-nll.md
Version: 1.63 (2022-06-30 => beta, 2022-08-11 => stable).
## Motivation
Over time, the Rust borrow checker has become "smarter" and thus allowed more programs to compile. There have been three different implementations: AST borrowck, MIR borrowck, and polonius (well, in progress). Additionally, there is the "lexical region resolver", which (roughly) solves the constraints generated through HIR typeck. It is not a full borrow checker, but does emit some errors.
The AST borrowck was the original implementation of the borrow checker and was part of the initially stabilized Rust 1.0. In mid 2017, work began to implement the current MIR borrow checker and that effort ompleted by the end of 2017, for the most part. During 2018, efforts were made to migrate away from the AST borrow checker to the MIR borrow checker - eventually culminating into "migrate" mode - where HIR typeck with lexical region resolving following by MIR borrow checking - being active by default in the 2018 edition.
In early 2019, migrate mode was turned on by default in the 2015 edition as well, but with MIR borrowck errors emitted as warnings. By late 2019, these warnings were upgraded to full errors. This was followed by the complete removal of the AST borrow checker.
In the period since, various errors emitted by the MIR borrow checker have been improved to the point that they are mostly the same or better than those emitted by the lexical region resolver.
While there do remain some degradations in errors (tracked under the [NLL-diagnostics tag](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-diagnostics), those are sufficiently small and rare enough that increased flexibility of MIR borrow check-only is now a worthwhile tradeoff.
## What is stabilized
As said previously, this does not fundamentally change the landscape of accepted programs. However, there are a [few](https://github.com/rust-lang/rust/issues?q=is%3Aopen+is%3Aissue+label%3ANLL-fixed-by-NLL) cases where programs can compile under `feature(nll)`, but not otherwise.
There are two notable patterns that are "fixed" by this stabilization. First, the `scoped_threads` feature, which is a continutation of a pre-1.0 API, can sometimes emit a [weird lifetime error](https://github.com/rust-lang/rust/issues/95527) without NLL. Second, actually seen in the standard library. In the `Extend` impl for `HashMap`, there is an implied bound of `K: 'a` that is available with NLL on but not without - this is utilized in the impl.
As mentioned before, there are a large number of diagnostic differences. Most of them are better, but some are worse. None are serious or happen often enough to need to block this PR. The biggest change is the loss of error code for a number of lifetime errors in favor of more general "lifetime may not live long enough" error. While this may *seem* bad, the former error codes were just attempts to somewhat-arbitrarily bin together lifetime errors of the same type; however, on paper, they end up being roughly the same with roughly the same kinds of solutions.
## What isn't stabilized
This PR does not completely remove the lexical region resolver. In the future, it may be possible to remove that (while still keeping HIR typeck) or to remove it together with HIR typeck.
## Tests
Many test outputs get updated by this PR. However, there are number of tests specifically geared towards NLL under `src/test/ui/nll`
## History
* On 2017-07-14, [tracking issue opened](https://github.com/rust-lang/rust/issues/43234)
* On 2017-07-20, [initial empty MIR pass added](https://github.com/rust-lang/rust/pull/43271)
* On 2017-08-29, [RFC opened](https://github.com/rust-lang/rfcs/pull/2094)
* On 2017-11-16, [Integrate MIR type-checker with NLL](https://github.com/rust-lang/rust/pull/45825)
* On 2017-12-20, [NLL feature complete](https://github.com/rust-lang/rust/pull/46862)
* On 2018-07-07, [Don't run AST borrowck on mir mode](https://github.com/rust-lang/rust/pull/52083)
* On 2018-07-27, [Add migrate mode](https://github.com/rust-lang/rust/pull/52681)
* On 2019-04-22, [Enable migrate mode on 2015 edition](https://github.com/rust-lang/rust/pull/59114)
* On 2019-08-26, [Don't downgrade errors on 2015 edition](https://github.com/rust-lang/rust/pull/64221)
* On 2019-08-27, [Remove AST borrowck](https://github.com/rust-lang/rust/pull/64790)
|
|
Rollup of 5 pull requests
Successful merges:
- #97312 (Compute lifetimes in scope at diagnostic time)
- #97495 (Add E0788 for improper #[no_coverage] usage)
- #97579 (Avoid creating `SmallVec`s in `global_llvm_features`)
- #97767 (interpret: do not claim UB until we looked more into variadic functions)
- #97787 (E0432: rust 2018 -> rust 2018 or later in --explain message)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
interpret: better control over whether we read data with provenance
The resolution in https://github.com/rust-lang/unsafe-code-guidelines/issues/286 seems to be that when we load data at integer type, we implicitly strip provenance. So let's implement that in Miri at least for scalar loads. This makes use of the fact that `Scalar` layouts distinguish pointer-sized integers and pointers -- so I was expecting some wild bugs where layouts set this incorrectly, but so far that does not seem to happen.
This does not entirely implement the solution to https://github.com/rust-lang/unsafe-code-guidelines/issues/286; we still do the wrong thing for integers in larger types: we will `copy_op` them and then do validation, and validation will complain about the provenance. To fix that we need mutating validation; validation needs to strip the provenance rather than complaining about it. This is a larger undertaking (but will also help resolve https://github.com/rust-lang/miri/issues/845 since we can reset padding to `Uninit`).
The reason this is useful is that we can now implement `addr` as a `transmute` from a pointer to an integer, and actually get the desired behavior of stripping provenance without exposing it!
|
|
Compute lifetimes in scope at diagnostic time
The set of available lifetimes is currently computed during lifetime resolution on HIR. It is only used for one diagnostic.
In this PR, HIR lifetime resolution just reports whether elided lifetimes are well-defined at the place of use. The diagnostic code is responsible for building a list of lifetime names if elision is not allowed.
This will allow to remove lifetime resolution on HIR eventually.
|
|
It returns the previous work product or panics if there is none. This rename
makes the purpose of this method clearer.
|
|
|
|
implicit provenance stripping where possible
|
|
Replace `&Vec<_>`s with `&[_]`s
It's generally preferable to use `&[_]` since it's one less indirection and it can be created from types other that `Vec`.
I've left `&Vec` in some locals where it doesn't really matter, in cases where `TypeFoldable` is expected (`TypeFoldable: Clone` so slice can't implement it) and in cases where it's `&TypeAliasThatIsActiallyVec`. Nothing important, really, I was just a little annoyed by `visit_generic_param_vec` :D
r? `@compiler-errors`
|
|
feature be enabled
|
|
Fix pretty printing named bound regions under -Zverbose
Fixed regression introduced in #97023
r? `@compiler-errors`
cc `@cjgillot`
|
|
Iterate over `maybe_unused_trait_imports` when checking dead trait imports
Closes #96873
r? `@cjgillot`
Some questions, if you have time:
- Is there a way to shorten the `rustc_data_structures::fx::FxIndexSet` path in the query declaration? I wasn't sure where to put a `use`.
- Was returning by reference from the query the right choice here?
- How would I go about evaluating the importance of the `is_dummy()` call in `check_crate`? I don't see failing tests when I comment it out. Should I just try to determine whether dummy spans can ever be put into `maybe_unused_trait_imports`?
- Am I doing anything silly with the various ID types?
- Is that `let-else` with `unreachable!()` bad? (i.e is there a better idiom? Would `panic!("<explanation>")` be better?)
- If I want to evaluate the perf of using a `Vec` as mentioned in #96873, is the best way to use the CI or is it feasible locally?
Thanks :)
|
|
|
|
|
|
|
|
|
