| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
Suggest quoting unquoted idents in attrs
Closes #58462
|
|
|
|
|
|
By making it an `EscapeError` instead of a `LitError`. This makes it
like the other errors produced when checking string literals contents,
e.g. for invalid escape sequences or bare CR chars.
NOTE: this means these errors are issued earlier, before expansion,
which changes behaviour. It will be possible to move the check back to
the later point if desired. If that happens, it's likely that all the
string literal contents checks will be delayed together.
One nice thing about this: the old approach had some code in
`report_lit_error` to calculate the span of the nul char from a range.
This code used a hardwired `+2` to account for the `c"` at the start of
a C string literal, but this should have changed to a `+3` for raw C
string literals to account for the `cr"`, which meant that the caret in
`cr"` nul error messages was one short of where it should have been. The
new approach doesn't need any of this and avoids the off-by-one error.
|
|
One consequence is that errors returned by
`maybe_new_parser_from_source_str` now must be consumed, so a bunch of
places that previously ignored those errors now cancel them. (Most of
them explicitly dropped the errors before. I guess that was to indicate
"we are explicitly ignoring these", though I'm not 100% sure.)
|
|
Two different lifetimes are conflated. This doesn't matter right now,
but needs to be fixed for the next commit to work. And the more
descriptive lifetime names make the code easier to read.
|
|
It's a little more concise, and the standard way to do it.
|
|
Each of these has a single call site: `source_file_to_parser`,
`try_file_to_source_file`, `file_to_source_file`. Having them separate
just makes the code longer and harder to read.
Also, `maybe_file_to_stream` doesn't need to be `pub`.
|
|
In #119606 I added them and used a `_mv` suffix, but that wasn't great.
A `with_` prefix has three different existing uses.
- Constructors, e.g. `Vec::with_capacity`.
- Wrappers that provide an environment to execute some code, e.g.
`with_session_globals`.
- Consuming chaining methods, e.g. `Span::with_{lo,hi,ctxt}`.
The third case is exactly what we want, so this commit changes
`DiagnosticBuilder::foo_mv` to `DiagnosticBuilder::with_foo`.
Thanks to @compiler-errors for the suggestion.
|
|
For consistency with `warn`/`struct_warn`, and also `{create,emit}_err`,
all of which use an abbreviated form.
|
|
Because it takes an error code after the span. This avoids the confusing
overlap with the `DiagCtxt::struct_span_err` method, which doesn't take
an error code.
|
|
|
|
The existing uses are replaced in one of three ways.
- In a function that also has calls to `emit`, just rearrange the code
so that exactly one of `delay_as_bug` or `emit` is called on every
path.
- In a function returning a `DiagnosticBuilder`, use
`downgrade_to_delayed_bug`. That's good enough because it will get
emitted later anyway.
- In `unclosed_delim_err`, one set of errors is being replaced with
another set, so just cancel the original errors.
|
|
The old code was very hard to understand, involving an
`emit_without_consuming` call *and* a `delay_as_bug_without_consuming`
call.
With slight changes both calls can be avoided. Not creating the error
until later is crucial, as is the early return in the `if recovered`
block.
It took me some time to come up with this reworking -- it went through
intermediate states much further from the original code than this final
version -- and it's isn't obvious at a glance that it is equivalent. But
I think it is, and the unchanged test behaviour is good supporting
evidence.
The commit also changes `check_trailing_angle_brackets` to return
`Option<ErrorGuaranteed>`. This provides a stricter proof that it
emitted an error message than asserting `dcx.has_errors().is_some()`,
which would succeed if any error had previously been emitted anywhere.
|
|
It's not clear why this was here, because the created error is returned
as a normal error anyway.
Nor is it clear why removing the call works. The change doesn't affect
any tests; `tests/ui/parser/issues/issue-102182-impl-trait-recover.rs`
looks like the only test that could have been affected.
|
|
Instead of taking `seq` as a mutable reference,
`maybe_recover_struct_lit_bad_delims` now consumes `seq` on the recovery
path, and returns `seq` unchanged on the non-recovery path. The commit
also combines an `if` and a `match` to merge two identical paths.
Also change `recover_seq_parse_error` so it receives a `PErr` instead of
a `PResult`, because all the call sites now handle the `Ok`/`Err`
distinction themselves.
|
|
In this parsing recovery function, we only need to emit the previously
obtained error message and mark `expr` as erroneous in the case where we
actually recover.
|
|
These all have relatively low use, and can be perfectly emulated with
a simpler construction method combined with `code` or `code_mv`.
|
|
To avoid the use of a mutable local variable, and because it reads more
nicely.
|
|
To avoid the use of a mutable local variable, and because it reads more
nicely.
|
|
This works for most of its call sites. This is nice, because `emit` very
much makes sense as a consuming operation -- indeed,
`DiagnosticBuilderState` exists to ensure no diagnostic is emitted
twice, but it uses runtime checks.
For the small number of call sites where a consuming emit doesn't work,
the commit adds `DiagnosticBuilder::emit_without_consuming`. (This will
be removed in subsequent commits.)
Likewise, `emit_unless` becomes consuming. And `delay_as_bug` becomes
consuming, while `delay_as_bug_without_consuming` is added (which will
also be removed in subsequent commits.)
All this requires significant changes to `DiagnosticBuilder`'s chaining
methods. Currently `DiagnosticBuilder` method chaining uses a
non-consuming `&mut self -> &mut Self` style, which allows chaining to
be used when the chain ends in `emit()`, like so:
```
struct_err(msg).span(span).emit();
```
But it doesn't work when producing a `DiagnosticBuilder` value,
requiring this:
```
let mut err = self.struct_err(msg);
err.span(span);
err
```
This style of chaining won't work with consuming `emit` though. For
that, we need to use to a `self -> Self` style. That also would allow
`DiagnosticBuilder` production to be chained, e.g.:
```
self.struct_err(msg).span(span)
```
However, removing the `&mut self -> &mut Self` style would require that
individual modifications of a `DiagnosticBuilder` go from this:
```
err.span(span);
```
to this:
```
err = err.span(span);
```
There are *many* such places. I have a high tolerance for tedious
refactorings, but even I gave up after a long time trying to convert
them all.
Instead, this commit has it both ways: the existing `&mut self -> Self`
chaining methods are kept, and new `self -> Self` chaining methods are
added, all of which have a `_mv` suffix (short for "move"). Changes to
the existing `forward!` macro lets this happen with very little
additional boilerplate code. I chose to add the suffix to the new
chaining methods rather than the existing ones, because the number of
changes required is much smaller that way.
This doubled chainging is a bit clumsy, but I think it is worthwhile
because it allows a *lot* of good things to subsequently happen. In this
commit, there are many `mut` qualifiers removed in places where
diagnostics are emitted without being modified. In subsequent commits:
- chaining can be used more, making the code more concise;
- more use of chaining also permits the removal of redundant diagnostic
APIs like `struct_err_with_code`, which can be replaced easily with
`struct_err` + `code_mv`;
- `emit_without_diagnostic` can be removed, which simplifies a lot of
machinery, removing the need for `DiagnosticBuilderState`.
|
|
rustc_span: More consistent span combination operations
Also add more tests for using `tt` in addition to `ident`, and some other minor tweaks, see individual commits.
This is a part of https://github.com/rust-lang/rust/pull/119412 that doesn't yet add side tables for metavariable spans.
|
|
|
|
|
|
Cleanup error handlers: round 5
More rustc_errors cleanups. A sequel to https://github.com/rust-lang/rust/pull/119171.
r? ````@compiler-errors````
|
|
Rollup of 10 pull requests
Successful merges:
- #118521 (Enable address sanitizer for MSVC targets using INFERASANLIBS linker flag)
- #119026 (std::net::bind using -1 for openbsd which in turn sets it to somaxconn.)
- #119195 (Make named_asm_labels lint not trigger on unicode and trigger on format args)
- #119204 (macro_rules: Less hacky heuristic for using `tt` metavariable spans)
- #119362 (Make `derive(Trait)` suggestion more accurate)
- #119397 (Recover parentheses in range patterns)
- #119417 (Uplift some miscellaneous coroutine-specific machinery into `check_closure`)
- #119539 (Fix typos)
- #119540 (Don't synthesize host effect args inside trait object types)
- #119555 (Add codegen test for RVO on MaybeUninit)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
It has a single call site.
|
|
Co-authored-by: León Orell Valerian Liehr <me@fmease.dev>
|
|
`Diagnostic` has 40 methods that return `&mut Self` and could be
considered setters. Four of them have a `set_` prefix. This doesn't seem
necessary for a type that implements the builder pattern. This commit
removes the `set_` prefixes on those four methods.
|
|
|
|
|
|
This involves lots of breaking changes. There are two big changes that
force changes. The first is that the bitflag types now don't
automatically implement normal derive traits, so we need to derive them
manually.
Additionally, bitflags now have a hidden inner type by default, which
breaks our custom derives. The bitflags docs recommend using the impl
form in these cases, which I did.
|
|
|
|
Don't suggest writing a bodyless arm if the pattern can never be a never pattern
#118527 enabled arms to be bodyless for never patterns ; this PR removes the `,` and `}` suggestions for patterns that could never be never patterns.
|
|
Update `parse_seq` doc
Some doc changes I made while working on an issue.
|
|
Simplify Parser::ident_or_error
Avoid a nested `Result<T, PResult<T>>`.
|
|
|
|
|
|
Avoid a nested `Result<T, PResult<T>>`.
|
|
Introduce `const Trait` (always-const trait bounds)
Feature `const_trait_impl` currently lacks a way to express “always const” trait bounds. This makes it impossible to define generic items like fns or structs which contain types that depend on const method calls (\*). While the final design and esp. the syntax of effects / keyword generics isn't set in stone, some version of “always const” trait bounds will very likely form a part of it. Further, their implementation is trivial thanks to the `effects` backbone.
Not sure if this needs t-lang sign-off though.
(\*):
```rs
#![feature(const_trait_impl, effects, generic_const_exprs)]
fn compute<T: const Trait>() -> Type<{ T::generate() }> { /*…*/ }
struct Store<T: const Trait>
where
Type<{ T::generate() }>:,
{
field: Type<{ T::generate() }>,
}
```
Lastly, “always const” trait bounds are a perfect fit for `generic_const_items`.
```rs
#![feature(const_trait_impl, effects, generic_const_items)]
const DEFAULT<T: const Default>: T = T::default();
```
Previously, we (oli, fee1-dead and I) wanted to reinterpret `~const Trait` as `const Trait` in generic const items which would've been quite surprising and not very generalizable.
Supersedes #117530.
---
cc `@oli-obk`
As discussed
r? fee1-dead (or compiler)
|
|
Suggest `=>` --> `>=` in comparisons
Fixes #117245
|
|
|
|
|
|
Also add some `dcx` methods to types that wrap `TyCtxt`, for easier
access.
|
|
Also add missing `#[track_caller]` attributes to `DiagCtxt` methods as
necessary to keep tests working.
|
|
|
|
r=compiler-errors
Clairify `ast::PatKind::Struct` presese of `..` by using an enum instead of a bool
The bool is mainly used for when a `..` is present, but it is also set on recovery to avoid errors. The doc comment not describes both of these cases.
See https://github.com/rust-lang/rust/blob/cee794ee98d49b45a55ba225680d98e0c4672736/compiler/rustc_parse/src/parser/pat.rs#L890-L897 for the only place this is constructed.
r? ``@compiler-errors``
|
|
See https://github.com/rust-lang/rust/blob/cee794ee98d49b45a55ba225680d98e0c4672736/compiler/rustc_parse/src/parser/pat.rs#L890-L897 for the only place this is constructed.
|
|
`IntoDiagnostic` defaults to `ErrorGuaranteed`, because errors are the
most common diagnostic level. It makes sense to do likewise for the
closely-related (and much more widely used) `DiagnosticBuilder` type,
letting us write `DiagnosticBuilder<'a, ErrorGuaranteed>` as just
`DiagnosticBuilder<'a>`. This cuts over 200 lines of code due to many
multi-line things becoming single line things.
|
