| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Do not use `?`-induced skewing of type inference in the compiler
This prevents breakage from #122412 and is generally a good idea.
r? `@estebank`
|
|
There are a bunch of small helper conditionals we use.
Inline them to get slightly better perf in a few cases,
especially when rustc is compiled without PGO.
|
|
workingjubilee:handle-call-call-call-call-calling-me-maybe, r=compiler-errors
Ensure stack before parsing dot-or-call
There are many cases where, due to codegen or a massively unruly codebase, a deeply nested `call(call(call(call(call(call(call(call(call(f())))))))))` can happen. This is a spot where it would be good to grow our stack, so that we can survive to tell the programmer their code is dubiously written.
Closes https://github.com/rust-lang/rust/issues/122715
|
|
There are many cases where, due to codegen or a massively unruly codebase,
a deeply nested call(call(call(call(call(call(call(call(call(f())))))))))
can happen. This is a spot where it would be good to grow our stack, so that
we can survive to tell the programmer their code is dubiously written.
|
|
Stabilize associated type bounds (RFC 2289)
This PR stabilizes associated type bounds, which were laid out in [RFC 2289]. This gives us a shorthand to express nested type bounds that would otherwise need to be expressed with nested `impl Trait` or broken into several `where` clauses.
### What are we stabilizing?
We're stabilizing the associated item bounds syntax, which allows us to put bounds in associated type position within other bounds, i.e. `T: Trait<Assoc: Bounds...>`. See [RFC 2289] for motivation.
In all position, the associated type bound syntax expands into a set of two (or more) bounds, and never anything else (see "How does this differ[...]" section for more info).
Associated type bounds are stabilized in four positions:
* **`where` clauses (and APIT)** - This is equivalent to breaking up the bound into two (or more) `where` clauses. For example, `where T: Trait<Assoc: Bound>` is equivalent to `where T: Trait, <T as Trait>::Assoc: Bound`.
* **Supertraits** - Similar to above, `trait CopyIterator: Iterator<Item: Copy> {}`. This is almost equivalent to breaking up the bound into two (or more) `where` clauses; however, the bound on the associated item is implied whenever the trait is used. See #112573/#112629.
* **Associated type item bounds** - This allows constraining the *nested* rigid projections that are associated with a trait's associated types. e.g. `trait Trait { type Assoc: Trait2<Assoc2: Copy>; }`.
* **opaque item bounds (RPIT, TAIT)** - This allows constraining associated types that are associated with the opaque without having to *name* the opaque. For example, `impl Iterator<Item: Copy>` defines an iterator whose item is `Copy` without having to actually name that item bound.
The latter three are not expressible in surface Rust (though for associated type item bounds, this will change in #120752, which I don't believe should block this PR), so this does represent a slight expansion of what can be expressed in trait bounds.
### How does this differ from the RFC?
Compared to the RFC, the current implementation *always* desugars associated type bounds to sets of `ty::Clause`s internally. Specifically, it does *not* introduce a position-dependent desugaring as laid out in [RFC 2289], and in particular:
* It does *not* desugar to anonymous associated items in associated type item bounds.
* It does *not* desugar to nested RPITs in RPIT bounds, nor nested TAITs in TAIT bounds.
This position-dependent desugaring laid out in the RFC existed simply to side-step limitations of the trait solver, which have mostly been fixed in #120584. The desugaring laid out in the RFC also added unnecessary complication to the design of the feature, and introduces its own limitations to, for example:
* Conditionally lowering to nested `impl Trait` in certain positions such as RPIT and TAIT means that we inherit the limitations of RPIT/TAIT, namely lack of support for higher-ranked opaque inference. See this code example: https://github.com/rust-lang/rust/pull/120752#issuecomment-1979412531.
* Introducing anonymous associated types makes traits no longer object safe, since anonymous associated types are not nameable, and all associated types must be named in `dyn` types.
This last point motivates why this PR is *not* stabilizing support for associated type bounds in `dyn` types, e.g, `dyn Assoc<Item: Bound>`. Why? Because `dyn` types need to have *concrete* types for all associated items, this would necessitate a distinct lowering for associated type bounds, which seems both complicated and unnecessary compared to just requiring the user to write `impl Trait` themselves. See #120719.
### Implementation history:
Limited to the significant behavioral changes and fixes and relevant PRs, ping me if I left something out--
* #57428
* #108063
* #110512
* #112629
* #120719
* #120584
Closes #52662
[RFC 2289]: https://rust-lang.github.io/rfcs/2289-associated-type-bounds.html
|
|
|
|
2021 edition
|
|
|
|
|
|
Given `'hello world'` and `'1 str', provide a structured suggestion for a valid string literal:
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-3.rs:2:26
|
LL | println!('hello world');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("hello world");
| ~ ~
```
```
error[E0762]: unterminated character literal
--> $DIR/lex-bad-str-literal-as-char-1.rs:2:20
|
LL | println!('1 + 1');
| ^^^^
|
help: if you meant to write a `str` literal, use double quotes
|
LL | println!("1 + 1");
| ~ ~
```
Fix #119685.
|
|
This prevents breakage when `?` no longer skews inference.
|
|
|
|
|
|
Improve diagnostics for parenthesized type arguments
Fixes #120892
r? fmease
|
|
To match `derive(Subdiagnostic)`.
Also rename `add_to_diagnostic{,_with}` as `add_to_diag{,_with}`.
|
|
To match `derive(Diagnostic)`.
Also rename `into_diagnostic` as `into_diag`.
|
|
Also rename `into_diagnostic_arg` as `into_diag_arg`, and
`NotIntoDiagnosticArg` as `NotInotDiagArg`.
|
|
|
|
r=cjgillot
Eagerly translate `HelpUseLatestEdition` in parser diagnostics
Fixes #122130.
This makes me suspicious of these other two usage of `add_to_diagnostic()`. Would they *also* crash? I haven't attempted to construct test cases for them.
```
compiler/rustc_parse/src/parser/expr.rs
3453: errors::HelpUseLatestEdition::new().add_to_diagnostic(e);
compiler/rustc_hir_typeck/src/expr.rs
2603: HelpUseLatestEdition::new().add_to_diagnostic(&mut err);
```
This also seems like a footgun?
|
|
|
|
Use `ControlFlow` in visitors.
Follow up to #121256
This does have a few small behaviour changes in some diagnostic output where the visitor will now find the first match rather than the last match. The change in `find_anon_types.rs` has the only affected test. I don't see this being an issue as the last occurrence isn't any better of a choice than the first.
|
|
Add asm goto support to `asm!`
Tracking issue: #119364
This PR implements asm-goto support, using the syntax described in "future possibilities" section of [RFC2873](https://rust-lang.github.io/rfcs/2873-inline-asm.html#asm-goto).
Currently I have only implemented the `label` part, not the `fallthrough` part (i.e. fallthrough is implicit). This doesn't reduce the expressive though, since you can use label-break to get arbitrary control flow or simply set a value and rely on jump threading optimisation to get the desired control flow. I can add that later if deemed necessary.
r? ``@Amanieu``
cc ``@ojeda``
|
|
|
|
|
|
|
|
Co-authored-by: Josh Stone <jistone@redhat.com>
|
|
|
|
Not the dropping of the trailing `s` -- this type describes a single
diagnostic and its name should be singular.
|
|
|
|
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
|
|
Detect more cases of `=` to `:` typo
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span arround and mention it. If the type could continue being parsed as an expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix #119665.
|
|
When a `Local` is fully parsed, but not followed by a `;`, keep the `:` span
arround and mention it. If the type could continue being parsed as an
expression, suggest replacing the `:` with a `=`.
```
error: expected one of `!`, `+`, `->`, `::`, `;`, or `=`, found `.`
--> file.rs:2:32
|
2 | let _: std::env::temp_dir().join("foo");
| - ^ expected one of `!`, `+`, `->`, `::`, `;`, or `=`
| |
| while parsing the type for `_`
| help: use `=` if you meant to assign
```
Fix #119665.
|
|
fmease:detect-empty-leading-where-clauses-on-ty-aliases, r=compiler-errors
Detect empty leading where clauses on type aliases
1. commit: refactor the AST of type alias where clauses
* I could no longer bear the look of `.0.1` and `.1.0`
* Arguably moving `split` out of `TyAlias` into a substruct might not make that much sense from a semantic standpoint since it reprs an index into `TyAlias.predicates` but it's alright and it cleans up the usage sites of `TyAlias`
2. commit: fix an oversight: An empty leading where clause is still a leading where clause
* semantically reject empty leading where clauses on lazy type aliases
* e.g., on `#![feature(lazy_type_alias)] type X where = ();`
* make empty leading where clauses on assoc types trigger lint `deprecated_where_clause_location`
* e.g., `impl Trait for () { type X where = (); }`
|
|
|
|
Count stashed errors again
Stashed diagnostics are such a pain. Their "might be emitted, might not" semantics messes with lots of things.
#120828 and #121206 made some big changes to how they work, improving some things, but still leaving some problems, as seen by the issues caused by #121206. This PR aims to fix all of them by restricting them in a way that eliminates the "might be emitted, might not" semantics while still allowing 98% of their benefit. Details in the individual commit logs.
r? `@oli-obk`
|
|
|
|
Stashed errors used to be counted as errors, but could then be
cancelled, leading to `ErrorGuaranteed` soundness holes. #120828 changed
that, closing the soundness hole. But it introduced other difficulties
because you sometimes have to account for pending stashed errors when
making decisions about whether errors have occured/will occur and it's
easy to overlook these.
This commit aims for a middle ground.
- Stashed errors (not warnings) are counted immediately as emitted
errors, avoiding the possibility of forgetting to consider them.
- The ability to cancel (or downgrade) stashed errors is eliminated, by
disallowing the use of `steal_diagnostic` with errors, and introducing
the more restrictive methods `try_steal_{modify,replace}_and_emit_err`
that can be used instead.
Other things:
- `DiagnosticBuilder::stash` and `DiagCtxt::stash_diagnostic` now both
return `Option<ErrorGuaranteed>`, which enables the removal of two
`delayed_bug` calls and one `Ty::new_error_with_message` call. This is
possible because we store error guarantees in
`DiagCtxt::stashed_diagnostics`.
- Storing the guarantees also saves us having to maintain a counter.
- Calls to the `stashed_err_count` method are no longer necessary
alongside calls to `has_errors`, which is a nice simplification, and
eliminates two more `span_delayed_bug` calls and one FIXME comment.
- Tests are added for three of the four fixed PRs mentioned below.
- `issue-121108.rs`'s output improved slightly, omitting a non-useful
error message.
Fixes #121451.
Fixes #121477.
Fixes #121504.
Fixes #121508.
|
|
Use `LitKind::Err` for malformed floats
#121120 changed `StringReader::cook_lexer_literal` to return `LitKind::Err` for malformed integer literals. This commit does the same for float literals, for consistency.
r? ``@fmease``
|
|
This slightly changes error messages in `float-field.rs`, but nothing of
real importance.
|
|
This prevents a follow-up type error in a test, which seems fine.
|
|
Much better!
Note that this involves renaming (and updating the value of)
`DIAGNOSTIC_BUILDER` in clippy.
|
|
Delayed bug audit
I went through all the calls to `delayed_bug` and `span_delayed_bug` and found a few places where they could be avoided.
r? `@compiler-errors`
|
|
To make them more concise and similar to each other.
|
|
|
|
|
|
|
|
Add newtypes for bool fields/params/return types
Fixed all the cases of this found with some simple searches for `*/ bool` and `bool /*`; probably many more
|
|
|
|
|
|
PR #119097 made the decision to make all `IntoDiagnostic` impls generic,
because this allowed a bunch of nice cleanups. But four hand-written
impls were unintentionally overlooked. This commit makes them generic.
|
