| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Make `.rmeta` file in `dep-info` have correct name (`lib` prefix)
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for the name of the metadata file, the `.d` file contained a file name different from the actual name used. Share the logic to fix the out-of-sync name.
Without this fix, the `.d` file contained
dash-separated_something-extra.rmeta: dash-separated.rs
instead of
libdash_separated_something-extra.rmeta: dash-separated.rs
which is the name of the file that is actually written by the compiler.
Worth noting: It took me several iterations to get all tests to pass, so I am relatively confident that this PR does not break anything.
Closes #68839
|
|
Extend rustc -Zls
This makes it show a lot more things and thus a lot more useful.
|
|
Enable incremental-relative-spans by default.
This was enabled on nightly in https://github.com/rust-lang/rust/pull/84762.
It has been a while, without obvious bugs. It's time to enable it by default for incremental runs.
|
|
|
|
r=compiler-errors
Abort if check nightly options failed on stable
Fixes #115680
Also, if there are multiple unstable options passing on stable compiler, printing multiple same `note` and `help` seems noisy.
|
|
|
|
LLVM already supports emitting compressed debuginfo. In debuginfo=full
builds, the debug section is often a large amount of data, and it
typically compresses very well (3x is not unreasonable.) We add a new
knob to allow debuginfo to be compressed when the matching LLVM
functionality is present. Like clang, if a known-but-disabled
compression mechanism is requested, we disable compression and emit
uncompressed debuginfo sections.
The API is different enough on older LLVMs we just pretend the support
is missing on LLVM older than 16.
|
|
|
|
Description of the `PATH` option:
> A filepath may optionally be specified for each requested information
> kind, in the format `--print KIND=PATH`, just like for `--emit`. When
> a path is specified, information will be written there instead of to
> stdout.
|
|
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for
the name of the metadata file, the `.d` file contained a file name
different from the actual name used. Share the logic to fix the
out-of-sync name.
Closes 68839.
|
|
This way is possible to write inline assembly code aware of it.
|
|
|
|
Make `--print` with path unstable
https://github.com/rust-lang/rust/pull/113780 should have gone through an MCP+FCP but wasn't, but instead of reverting the original PR, this PR just make that new option unstable.
[Zulip discussion](https://rust-lang.zulipchat.com/#narrow/stream/238009-t-compiler.2Fmeetings/topic/.5Bweekly.5D.202023-07-27/near/379199738)
cc `@dtolnay`
|
|
https://github.com/rust-lang/rust/pull/113780 should have gone through
an MCP+FCP but wasn't, but instead of reverting the original PR, this PR
just make that new option unstable.
|
|
|
|
|
|
This reverts commit 557359f92512ca88b62a602ebda291f17a953002, reversing
changes made to 1e6c09a803fd543a98bfbe1624d697a55300a786.
|
|
Prototype: Add unstable `-Z reference-niches` option
MCP: rust-lang/compiler-team#641
Relevant RFC: rust-lang/rfcs#3204
This prototype adds a new `-Z reference-niches` option, controlling the range of valid bit-patterns for reference types (`&T` and `&mut T`), thereby enabling new enum niching opportunities. Like `-Z randomize-layout`, this setting is crate-local; as such, references to built-in types (primitives, tuples, ...) are not affected.
The possible settings are (here, `MAX` denotes the all-1 bit-pattern):
| `-Z reference-niches=` | Valid range |
|:---:|:---:|
| `null` (the default) | `1..=MAX` |
| `size` | `1..=(MAX- size)` |
| `align` | `align..=MAX.align_down_to(align)` |
| `size,align` | `align..=(MAX-size).align_down_to(align)` |
------
This is very WIP, and I'm not sure the approach I've taken here is the best one, but stage 1 tests pass locally; I believe this is in a good enough state to unleash this upon unsuspecting 3rd-party code, and see what breaks.
|
|
|
|
|
|
|
|
|
|
|
|
Set error handler output format as soon as possible
Should fix https://github.com/rust-lang/rust/pull/112692#issuecomment-1611585904.
|
|
Add simple markdown formatting to `rustc --explain` output
This is a second attempt at #104540, which is #63128 without dependencies.
This PR adds basic markdown formatting to `rustc --explain` output when available. Currently, the output just displays raw markdown: this works of course, but it really doesn't look very elegant. (output is `rustc --explain E0038`)
<img width="583" alt="image" src="https://github.com/rust-lang/rust/assets/13724985/ea418117-47af-455b-83c0-6fc59276efee">
After this patch, sample output from the same file:
<img width="693" alt="image" src="https://github.com/rust-lang/rust/assets/13724985/12f7bf9b-a3fe-4104-b74b-c3e5227f3de9">
This also obeys the `--color always/auto/never` command option. Behavior:
- If pager is available and supports color, print with formatting to the pager
- If pager is not available or fails print with formatting to stdout - otherwise without formatting
- Follow `--color always/never` if suppied
- If everything fails, just print plain text to stdout
r? `@oli-obk`
cc `@estebank`
(since the two of you were involved in the previous discussion)
|
|
add flag for enabling global cache usage for proof trees and printing proof trees on error
This adds a few new things:
- `-Zdump-solver-proof-tree=always/never/on-error`
- `always`/`never` were previosuly specifiable by whether the flag exists or not, th new flag is `on_error` which reruns obligations of fulfillment and selection errors with proof tree generation enabled and prints them out
- `-Zdump-solver-proof-tree-uses-cache`
- allows forcing global cache to be used or unused for all generated proof trees, global cache is enabled by default for `always` so that it accurately represents what happend. This flag currently would affect misc uses of `GenerateProofTree::Yes` which will be added in the future for things like diagnostics logic and rustdoc's auto_trait file. We can fix this when we start using proof tree generation for those use cases if it's desirable.
I also changed the output to go straight to stdout instead of going through `debug!` so that `-Zdump-solver-proof-tree` can be adequately used on `nightly` not just a locally built toolchain.
The idea for `on-error` is that it should hopefully make it easier to quickly figure out "why doesnt this code compile"- you just pass in `-Zdump-solver-proof-tree=on-error` and you'll only get proof trees you care about.
---
r? `@lcnr` `@compiler-errors`
|
|
|
|
|
|
|
|
Currently, the output of `rustc --explain foo` displays the raw markdown in a
pager. This is acceptable, but using actual formatting makes it easier to
understand.
This patch consists of three major components:
1. A markdown parser. This is an extremely simple non-backtracking recursive
implementation that requires normalization of the final token stream
2. A utility to write the token stream to an output buffer
3. Configuration within rustc_driver_impl to invoke this combination for
`--explain`. Like the current implementation, it first attempts to print to
a pager with a fallback colorized terminal, and standard print as a last
resort.
If color is disabled, or if the output does not support it, or if printing
with color fails, it will write the raw markdown (which matches current
behavior).
Pagers known to support color are: `less` (with `-r`), `bat` (aka `catbat`),
and `delta`.
The markdown parser does not support the entire markdown specification, but
should support the following with reasonable accuracy:
- Headings, including formatting
- Comments
- Code, inline and fenced block (no indented block)
- Strong, emphasis, and strikethrough formatted text
- Links, anchor, inline, and reference-style
- Horizontal rules
- Unordered and ordered list items, including formatting
This parser and writer should be reusable by other systems if ever needed.
|
|
|
|
Add `-Zremark-dir` unstable flag to write LLVM optimization remarks to YAML
This PR adds an option for `rustc` to emit LLVM optimization remarks to a set of YAML files, which can then be digested by existing tools, like https://github.com/OfekShilon/optview2. When `-Cremark-dir` is passed, and remarks are enabled (`-Cremark=all`), the remarks will be now written to the specified directory, **instead** of being printed to standard error output. The files are named based on the CGU from which they are being generated.
Currently, the remarks are written using the LLVM streaming machinery, directly in the diagnostics handler. It seemed easier than going back to Rust and then form there back to C++ to use the streamer from the diagnostics handler. But there are many ways to implement this, of course, so I'm open to suggestions :)
I included some comments with questions into the code. Also, I'm not sure how to test this.
r? `@tmiasko`
|
|
|
|
linker flavors
- only the stable values for `-Clink-self-contained` can be used on stable until we
have more feedback on the interface
- `-Zunstable-options` is required to use unstable linker flavors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Write to stdout if `-` is given as output file
With this PR, if `-o -` or `--emit KIND=-` is provided, output will be written to stdout instead. Binary output (those of type `obj`, `llvm-bc`, `link` and `metadata`) being written this way will result in an error unless stdout is not a tty. Multiple output types going to stdout will trigger an error too, as they will all be mixded together.
This implements https://github.com/rust-lang/compiler-team/issues/431
The idea behind the changes is to introduce an `OutFileName` enum that represents the output - be it a real path or stdout - and to use this enum along the code paths that handle different output types.
|
|
Removed use of iteration through a HashMap/HashSet in rustc_incremental and replaced with IndexMap/IndexSet
This allows for the `#[allow(rustc::potential_query_instability)]` in rustc_incremental to be removed, moving towards fixing #84447 (although a LOT more modules have to be changed to fully resolve it). Only HashMaps/HashSets that are being iterated through have been modified (although many structs and traits outside of rustc_incremental had to be modified as well, as they had fields/methods that involved a HashMap/HashSet that would be iterated through)
I'm making a PR for just 1 module changed to test for performance regressions and such, for future changes I'll either edit this PR to reflect additional modules being converted, or batch multiple modules of changes together and make a PR for each group of modules.
|
|
misc issues, added collect to UnordItems
|
|
If `-o -` or `--emit KIND=-` is provided, output will be written
to stdout instead. Binary output (`obj`, `llvm-bc`, `link` and
`metadata`) being written this way will result in an error unless
stdout is not a tty. Multiple output types going to stdout will
trigger an error too, as they will all be mixded together.
|
|
|
|
|
|
|
|
fix(resolve): replace bindings to dummy for unresolved imports
close #109343
In #109343, `f` in `pub use f as g` points to:
|namespace| binding|
|-|-|
|type| `external crate f`|
|value| `None` |
|macro| `None` |
When resolve `value_ns` during `resolve_doc_links`, the value of the binding of single_import `pub use f as g` goes to `pub use inner::f`, and since it does not satisfy [!self.is_accessible_from(binding.vis, single_import.parent_scope.module)](https://github.com/rust-lang/rust/blob/master/compiler/rustc_resolve/src/ident.rs#L971) and returns `Err(Undetermined)`, which eventually goes to `PathResult::Indeterminate => unreachable!`.
This PR replace all namespace binding to `dummy_binding` for indeterminate import, so, the bindings of `pub use f as g` had been changed to followings after finalize:
|namespace| binding|
|-|-|
|type| `dummy`|
|value| `dummy` |
|macro| `dummy` |
r?`@petrochenkov`
|
|
|
|
Error message all end up passing into a function as an `impl
Into<{D,Subd}iagnosticMessage>`. If an error message is creatd as
`&format("...")` that means we allocate a string (in the `format!`
call), then take a reference, and then clone (allocating again) the
reference to produce the `{D,Subd}iagnosticMessage`, which is silly.
This commit removes the leading `&` from a lot of these cases. This
means the original `String` is moved into the
`{D,Subd}iagnosticMessage`, avoiding the double allocations. This
requires changing some function argument types from `&str` to `String`
(when all arguments are `String`) or `impl
Into<{D,Subd}iagnosticMessage>` (when some arguments are `String` and
some are `&str`).
|
