| Age | Commit message (Collapse) | Author | Lines |
|---|
|
r=davidtwco
Rework `untranslatable_diagnostic` lint
Currently it only checks calls to functions marked with `#[rustc_lint_diagnostics]`. This PR changes it to check calls to any function with an `impl Into<{D,Subd}iagnosticMessage>` parameter. This greatly improves its coverage and doesn't rely on people remembering to add `#[rustc_lint_diagnostics]`. It also lets us add `#[rustc_lint_diagnostics]` to a number of functions that don't have an `impl Into<{D,Subd}iagnosticMessage>`, such as `Diag::span`.
r? ``@davidtwco``
|
|
Prior to the previous commit, `#[rust_lint_diagnostics]` attributes
could only be used on methods with an `impl Into<{D,Subd}iagMessage>`
parameter. But there are many other nearby diagnostic methods (e.g.
`Diag::span`) that don't take such a parameter and should have the
attribute.
This commit adds the missing attribute to these `Diag` methods. This
requires adding some missing
`#[allow(rustc::diagnostic_outside_of_impl)]` markers at call sites to
these methods.
|
|
Signed-off-by: David Wood <david@davidtw.co>
|
|
Not the dropping of the trailing `s` -- this type describes a single
diagnostic and its name should be singular.
|
|
|
|
Existing names for values of this type are `sess`, `parse_sess`,
`parse_session`, and `ps`. `sess` is particularly annoying because
that's also used for `Session` values, which are often co-located, and
it can be difficult to know which type a value named `sess` refers to.
(That annoyance is the main motivation for this change.) `psess` is nice
and short, which is good for a name used this much.
The commit also renames some `parse_sess_created` values as
`psess_created`.
|
|
It's always empty.
|
|
Emitter cleanups
Some cleanups I made when reading emitter code. In particular, `HumanEmitter` and `JsonEmitter` have gone from three constructors to one.
r? `@oli-obk`
|
|
Because `HumanEmitter::new` is enough, in conjunction with the (renamed)
`stderr_destination` function.
|
|
Because it's now the only constructor.
|
|
It only has two call sites, and one of those doesn't set the source map.
|
|
Stashed errors used to be counted as errors, but could then be
cancelled, leading to `ErrorGuaranteed` soundness holes. #120828 changed
that, closing the soundness hole. But it introduced other difficulties
because you sometimes have to account for pending stashed errors when
making decisions about whether errors have occured/will occur and it's
easy to overlook these.
This commit aims for a middle ground.
- Stashed errors (not warnings) are counted immediately as emitted
errors, avoiding the possibility of forgetting to consider them.
- The ability to cancel (or downgrade) stashed errors is eliminated, by
disallowing the use of `steal_diagnostic` with errors, and introducing
the more restrictive methods `try_steal_{modify,replace}_and_emit_err`
that can be used instead.
Other things:
- `DiagnosticBuilder::stash` and `DiagCtxt::stash_diagnostic` now both
return `Option<ErrorGuaranteed>`, which enables the removal of two
`delayed_bug` calls and one `Ty::new_error_with_message` call. This is
possible because we store error guarantees in
`DiagCtxt::stashed_diagnostics`.
- Storing the guarantees also saves us having to maintain a counter.
- Calls to the `stashed_err_count` method are no longer necessary
alongside calls to `has_errors`, which is a nice simplification, and
eliminates two more `span_delayed_bug` calls and one FIXME comment.
- Tests are added for three of the four fixed PRs mentioned below.
- `issue-121108.rs`'s output improved slightly, omitting a non-useful
error message.
Fixes #121451.
Fixes #121477.
Fixes #121504.
Fixes #121508.
|
|
Much better!
Note that this involves renaming (and updating the value of)
`DIAGNOSTIC_BUILDER` in clippy.
|
|
There are lots of functions that modify a diagnostic. This can be via a
`&mut Diagnostic` or a `&mut DiagnosticBuilder`, because the latter type
wraps the former and impls `DerefMut`.
This commit converts all the `&mut Diagnostic` occurrences to `&mut
DiagnosticBuilder`. This is a step towards greatly simplifying
`Diagnostic`. Some of the relevant function are made generic, because
they deal with both errors and warnings. No function bodies are changed,
because all the modifier methods are available on both `Diagnostic` and
`DiagnosticBuilder`.
|
|
errors: only eagerly translate subdiagnostics
Subdiagnostics don't need to be lazily translated, they can always be eagerly translated. Eager translation is slightly more complex as we need to have a `DiagCtxt` available to perform the translation, which involves slightly more threading of that context.
This slight increase in complexity should enable later simplifications - like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages into the diagnostic structs rather than having them in separate files (working on that was what led to this change).
r? ```@nnethercote```
|
|
Subdiagnostics don't need to be lazily translated, they can always be
eagerly translated. Eager translation is slightly more complex as we need
to have a `DiagCtxt` available to perform the translation, which involves
slightly more threading of that context.
This slight increase in complexity should enable later simplifications -
like passing `DiagCtxt` into `AddToDiagnostic` and moving Fluent messages
into the diagnostic structs rather than having them in separate files
(working on that was what led to this change).
Signed-off-by: David Wood <david@davidtw.co>
|
|
|
|
|
|
|
|
`Diagnostic::code` has the type `DiagnosticId`, which has `Error` and
`Lint` variants. Plus `Diagnostic::is_lint` is a bool, which should be
redundant w.r.t. `Diagnostic::code`.
Seems simple. Except it's possible for a lint to have an error code, in
which case its `code` field is recorded as `Error`, and `is_lint` is
required to indicate that it's a lint. This is what happens with
`derive(LintDiagnostic)` lints. Which means those lints don't have a
lint name or a `has_future_breakage` field because those are stored in
the `DiagnosticId::Lint`.
It's all a bit messy and confused and seems unintentional.
This commit:
- removes `DiagnosticId`;
- changes `Diagnostic::code` to `Option<String>`, which means both
errors and lints can straightforwardly have an error code;
- changes `Diagnostic::is_lint` to `Option<IsLint>`, where `IsLint` is a
new type containing a lint name and a `has_future_breakage` bool, so
all lints can have those, error code or not.
|
|
|
|
|
|
|
|
`is_force_warn` is only possible for diagnostics with `Level::Warning`,
but it is currently stored in `Diagnostic::code`, which every diagnostic
has.
This commit:
- removes the boolean `DiagnosticId::Lint::is_force_warn` field;
- adds a `ForceWarning` variant to `Level`.
Benefits:
- The common `Level::Warning` case now has no arguments, replacing
lots of `Warning(None)` occurrences.
- `rustc_session::lint::Level` and `rustc_errors::Level` are more
similar, both having `ForceWarning` and `Warning`.
|
|
Also add missing `#[track_caller]` attributes to `DiagCtxt` methods as
necessary to keep tests working.
|
|
`IntoDiagnostic` defaults to `ErrorGuaranteed`, because errors are the
most common diagnostic level. It makes sense to do likewise for the
closely-related (and much more widely used) `DiagnosticBuilder` type,
letting us write `DiagnosticBuilder<'a, ErrorGuaranteed>` as just
`DiagnosticBuilder<'a>`. This cuts over 200 lines of code due to many
multi-line things becoming single line things.
|
|
This lets different error levels share the same return type from
`emit_*`.
- A lot of inconsistencies in the `DiagCtxt` API are removed.
- `Noted` is removed.
- `FatalAbort` is introduced for fatal errors (abort via `raise`),
replacing the `EmissionGuarantee` impl for `!`.
- `Bug` is renamed `BugAbort` (to avoid clashing with `Level::Bug` and
to mirror `FatalAbort`), and modified to work in the new way with bug
errors (abort via panic).
- Various diagnostic creators and emitters updated to the new, better
signatures. Note that `DiagCtxt::bug` no longer needs to call
`panic_any`, because `emit` handles that.
Also shorten the obnoxiously long
`diagnostic_builder_emit_producing_guarantee` name.
|
|
And make all hand-written `IntoDiagnostic` impls generic, by using
`DiagnosticBuilder::new(dcx, level, ...)` instead of e.g.
`dcx.struct_err(...)`.
This means the `create_*` functions are the source of the error level.
This change will let us remove `struct_diagnostic`.
Note: `#[rustc_lint_diagnostics]` is added to `DiagnosticBuilder::new`,
it's necessary to pass diagnostics tests now that it's used in
`into_diagnostic` functions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It's necessary for `derive(Diagnostic)`, but is best avoided elsewhere
because there are clearer alternatives.
This required adding `Handler::struct_almost_fatal`.
|
|
Instead of allowing `rustc::potential_query_instability` on the whole
crate we go over each lint and allow it individually if it is safe to
do. Turns out all instances were safe to allow in this crate.
|
|
|
|
They now only ever contains symbols.
|
|
`parse_cfgspecs` and `parse_check_cfg` run very early, before the main
interner is running. They each use a short-lived interner and convert
all interned symbols to strings in their output data structures. Once
the main interner starts up, these data structures get converted into
new data structures that are identical except with the strings converted
to symbols.
All is not obvious from the current code, which is a mess, particularly
with inconsistent naming that obscures the parallel string/symbol data
structures. This commit clean things up a lot.
- The existing `CheckCfg` type is generic, allowing both
`CheckCfg<String>` and `CheckCfg<Symbol>` forms. This is really
useful, but it defaults to `String`. The commit removes the default so
we have to use `CheckCfg<String>` and `CheckCfg<Symbol>` explicitly,
which makes things clearer.
- Introduces `Cfg`, which is generic over `String` and `Symbol`, similar
to `CheckCfg`.
- Renames some things.
- `parse_cfgspecs` -> `parse_cfg`
- `CfgSpecs` -> `Cfg<String>`, plus it's used in more places, rather
than the underlying `FxHashSet` type.
- `CrateConfig` -> `Cfg<Symbol>`.
- `CrateCheckConfig` -> `CheckCfg<Symbol>`
- Adds some comments explaining the string-to-symbol conversions.
- `to_crate_check_config`, which converts `CheckCfg<String>` to
`CheckCfg<Symbol>`, is inlined and removed and combined with the
overly-general `CheckCfg::map_data` to produce
`CheckCfg::<String>::intern`.
- `build_configuration` now does the `Cfg<String>`-to-`Cfg<Symbol>`
conversion, so callers don't need to, which removes the need for
`to_crate_config`.
The diff for two of the fields in `Config` is a good example of the
improved clarity:
```
- pub crate_cfg: FxHashSet<(String, Option<String>)>,
- pub crate_check_cfg: CheckCfg,
+ pub crate_cfg: Cfg<String>,
+ pub crate_check_cfg: CheckCfg<String>,
```
Compare that with the diff for the corresponding fields in `ParseSess`,
and the relationship to `Config` is much clearer than before:
```
- pub config: CrateConfig,
- pub check_config: CrateCheckConfig,
+ pub config: Cfg<Symbol>,
+ pub check_config: CheckCfg<Symbol>,
```
|
|
Because its order doesn't matter. This is well demonstrated by
`to_crate_config`, which creates a `CrateConfig` from an `FxHashSet`.
|
|
It's a better name, and lets "active features" refer to the features
that are active in a particular program, due to being declared or
enabled by the edition.
The commit also renames `Features::enabled` as `Features::active` to
match this; I changed my mind and have decided that "active" is a little
better thatn "enabled" for this, particularly because a number of
pre-existing comments use "active" in this way.
Finally, the commit renames `Status::Stable` as `Status::Accepted`, to
match `ACCEPTED_FEATURES`.
|
|
fix ##113702
fix #113702
unknown unstable lint command lint
improve impelementation
|
|
It was only ever set in a function which isn't called anywhere.
|
|
|
|
|
|
Implement rust-lang/compiler-team#578.
When an ICE is encountered on nightly releases, the new rustc panic
handler will also write the contents of the backtrace to disk. If any
`delay_span_bug`s are encountered, their backtrace is also added to the
file. The platform and rustc version will also be collected.
|
|
|
|
|
|
Stop normalizing so many different prefixes
Previously, we would normalize *all* of
- the absolute path to the repository checkout
- the /rustc/$sha for stage1 (if `remap-debuginfo` was enabled)
- the /rustc/$sha for download-rustc
- the sysroot for download-rustc
Now, we consistently only normalize /rustc/FAKE_PREFIX. Not only is this much simpler, but it also avoids ongoing maintenance for download-rustc and makes it much less likely that tests break by accident.
- Change `tests/ui/track-diagnostics/track6.rs` to use a relative path instead of an absolute one. I am not actually sure why `track_caller` works here, but it does seem to work :shrug:
- Pass `-Zsimulate-remapped-rust-src-base=/rustc/FAKE_PREFIX` to all suites, not just UI. In particular, mir-opt tests emit /rustc/ paths in their output.
r? ```@cjgillot``` since you reviewed https://github.com/rust-lang/rust/pull/110699 - this is the test that it doesn't regress :)
|
|
Each of `{D,Subd}iagnosticMessage::{Str,Eager}` has a comment:
```
// FIXME(davidtwco): can a `Cow<'static, str>` be used here?
```
This commit answers that question in the affirmative. It's not the most
compelling change ever, but it might be worth merging.
This requires changing the `impl<'a> From<&'a str>` impls to `impl
From<&'static str>`, which involves a bunch of knock-on changes that
require/result in call sites being a little more precise about exactly
what kind of string they use to create errors, and not just `&str`. This
will result in fewer unnecessary allocations, though this will not have
any notable perf effects given that these are error paths.
Note that I was lazy within Clippy, using `to_string` in a few places to
preserve the existing string imprecision. I could have used `impl
Into<{D,Subd}iagnosticMessage>` in various places as is done in the
compiler, but that would have required changes to *many* call sites
(mostly changing `&format("...")` to `format!("...")`) which didn't seem
worthwhile.
|
