| Age | Commit message (Collapse) | Author | Lines |
|---|
|
This avoids the need for a bespoke `tcx.analysis()` call.
|
|
It's simpler to distinguish the two AST modes directly in `PpMode`.
|
|
Compute NLL loan scopes using the polonius model
For a *location-insensitive* analysis (that is, without expressiveness improvements for users yet), this PR implements loans going out of scope using reachability and liveness, rather than checking if the issuing region's values contain a given CFG point. This is equivalent to NLL scopes and computes the same data.
r? `@matthewjasper`
A couple of notes:
- there are some assumptions about SCC representatives, placeholders, free regions, and member constraints that I believe hold, and they're documented in the code
- this passes all the UI tests with `-Zpolonius=next` -- the perf is [not terrible](https://github.com/rust-lang/rust/pull/112432#issuecomment-1749685862) and there are a bunch of ways to improve it in the future.
- there's a fixme left, hopefully Matthew you know a clean way to get the information it mentions.
|
|
Implement `-Clink-self-contained=-linker` opt out
This implements the `-Clink-self-contained` opt out necessary to switch to lld by changing rustc's defaults instead of cargo's.
Components that are enabled and disabled on the CLI are recorded, for the purpose of being merged with the ones which the target spec will declare (I'll open another PR for that tomorrow, for easier review).
For MCP510, we now check whether using the self-contained linker is disabled on the CLI. Right now it would only be sensible to with `-Zgcc-ld=lld` (and I'll add some checks that we don't both enable and disable a component on the CLI in a future PR), but the goal is to simplify adding the check of the target's enabled components here in the follow-up PRs.
r? `@petrochenkov`
|
|
-Zmir-enable-passes: document that this may enable unsound passes
also add some comments explaining why MIR opts are marked as unsound
|
|
|
|
This removes a bit of global mutable state
|
|
|
|
emit an error if components are both enabled and disabled on the CLI
|
|
record both enabled and disabled components so that they can be merged
with the ones that the target spec will define
|
|
this will prevent parsing when expecting more than a single component
to be parsed, and prepare for the symetric variant-to-name function to
be added
|
|
|
|
fix a few comments
|
|
|
|
It is subsumed by `-Clinker-flavor=*-lld-cc -Clink-self-contained=+linker` options now
|
|
|
|
|
|
this allows to opt into using the legacy version or the in-tree
prototype
|
|
|
|
[breaking change] Validate crate name in `--extern` [MCP 650]
Reject non-ASCII-identifier crate names passed to the CLI option `--extern` (`rustc`, `rustdoc`).
Implements [MCP 650](https://github.com/rust-lang/compiler-team/issues/650) (except that we only allow ASCII identifiers not arbitrary Rust identifiers).
Fixes #113035.
[As mentioned on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/233931-t-compiler.2Fmajor-changes/topic/Disallow.20non-identifier-valid.20--extern.20cr.E2.80.A6.20compiler-team.23650/near/376826988), doing a crater run probably doesn't make sense since it wouldn't yield anything. Most users don't interact with `rustc` directly but only ever through Cargo which always passes a valid crate name to `--extern` when it invokes `rustc` and `rustdoc`. In any case, the user wouldn't be able to use such a crate name in the source code anyway.
Note that I'm not using [`rustc_session::output::validate_crate_name`](https://doc.rust-lang.org/nightly/nightly-rustc/rustc_session/output/fn.validate_crate_name.html) (used for `--crate-name` and `#![crate_name]`) since the latter doesn't reject non-ASCII crate names and ones that start with a digit.
As an aside, I've also thought about getting rid of `validate_crate_name` entirely in a separate PR (with another MCP) in favor of `is_ascii_ident` to reject more weird `--crate-name`s, `#![crate_name]`s and file names but I think that would lead to a lot of actual breakage, namely because of file names starting with a digit. In `tests/ui` 9 tests would be impacted for example.
CC `@estebank`
r? `@est31`
|
|
Co-authored-by: Vadim Petrochenkov <vadim.petrochenkov@gmail.com>
|
|
|
|
|
|
Avoid blessing cargo deps's source code in ui tests
Before this PR, the source code of dependencies was included in UI test error messages whenever possible. Unfortunately, "whenever possible" means in some cases the source code wouldn't be injected, resulting in a test failure.
One such case is when `$CARGO_HOME` is remapped to something that is not present on disk [^1]. As the remapped path doesn't exist on disk, the source code wouldn't be showed in `tests/ui/issues/issue-21763.rs`:
```diff
= note: required for `hashbrown::raw::RawTable<(Rc<()>, Rc<()>)>` to implement `Send`
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>, RandomState>`
--> $HASHBROWN_SRC_LOCATION
- |
-LL | pub struct HashMap<K, V, S = DefaultHashBuilder, A: Allocator + Clone = Global> {
- | ^^^^^^^
note: required because it appears within the type `HashMap<Rc<()>, Rc<()>>`
--> $SRC_DIR/std/src/collections/hash/map.rs:LL:COL
note: required by a bound in `foo`
```
This PR fixes the problem by always hiding dependencies source code in the error messages generated during UI tests. This is implemented with a new internal flag, `-Z ignore-directory-in-diagnostics-source-blocks=$path`, which compiletest passes during UI tests. Once this is merged, remapping the Cargo home will be supported.
This PR is best reviewed commit-by-commit.
[^1]: After being puzzled for a bit, I discovered why this never impacted `rust-lang/rust`: we don't remap `$CARGO_HOME` :sweat_smile:. Instead, we set `$CARGO_HOME` to `/cargo` in CI, which sort-of-but-not-really achieves the same effect.
|
|
Make `.rmeta` file in `dep-info` have correct name (`lib` prefix)
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for the name of the metadata file, the `.d` file contained a file name different from the actual name used. Share the logic to fix the out-of-sync name.
Without this fix, the `.d` file contained
dash-separated_something-extra.rmeta: dash-separated.rs
instead of
libdash_separated_something-extra.rmeta: dash-separated.rs
which is the name of the file that is actually written by the compiler.
Worth noting: It took me several iterations to get all tests to pass, so I am relatively confident that this PR does not break anything.
Closes #68839
|
|
|
|
Extend rustc -Zls
This makes it show a lot more things and thus a lot more useful.
|
|
|
|
Enable incremental-relative-spans by default.
This was enabled on nightly in https://github.com/rust-lang/rust/pull/84762.
It has been a while, without obvious bugs. It's time to enable it by default for incremental runs.
|
|
|
|
Use `FreezeLock` for `CStore`
This uses `FreezeLock` to protect the `CStore`. `FreezeReadGuard` and `FreezeWriteGuard` are changed to support a `map` operation.
r? `@oli-obk`
|
|
r=compiler-errors
Abort if check nightly options failed on stable
Fixes #115680
Also, if there are multiple unstable options passing on stable compiler, printing multiple same `note` and `help` seems noisy.
|
|
|
|
|
|
|
|
rustfmt didn't save me here, sigh
|
|
LLVM already supports emitting compressed debuginfo. In debuginfo=full
builds, the debug section is often a large amount of data, and it
typically compresses very well (3x is not unreasonable.) We add a new
knob to allow debuginfo to be compressed when the matching LLVM
functionality is present. Like clang, if a known-but-disabled
compression mechanism is requested, we disable compression and emit
uncompressed debuginfo sections.
The API is different enough on older LLVMs we just pretend the support
is missing on LLVM older than 16.
|
|
Add CL and CMD into to pdb debug info
Partial fix for https://github.com/rust-lang/rust/issues/96475
The Arg0 and CommandLineArgs of the MCTargetOptions cpp class are not set within https://github.com/rust-lang/rust/blob/bb548f964572f7fe652716f5897d9050a31c936e/compiler/rustc_llvm/llvm-wrapper/PassWrapper.cpp#L378
This causes LLVM to not neither output any compiler path (cl) nor the arguments that were used when invoking it (cmd) in the PDB file.
This fix adds the missing information to the target machine so LLVM can use it.
|
|
Set Arg0 and CommandLineArgs in MCTargetoptions so LLVM outputs correct CL and CMD in LF_DEBUGINFO instead of empty/invalid values.
|
|
|
|
Stabilize `PATH` option for `--print KIND=PATH`
This PR propose stabilizing the `PATH` option for `--print KIND=PATH`. This option was previously added in https://github.com/rust-lang/rust/pull/113780 (as insta-stable before being un-stablized in https://github.com/rust-lang/rust/pull/114139).
Description of the `PATH` option:
> A filepath may optionally be specified for each requested information kind, in the format `--print KIND=PATH`, just like for `--emit`. When a path is specified, information will be written there instead of to stdout.
------
Description of the original PR [\[link\]](https://github.com/rust-lang/rust/pull/113780#issue-1807080607):
> **Support --print KIND=PATH command line syntax**
>
> As is already done for `--emit KIND=PATH` and `-L KIND=PATH`.
>
> In the discussion of https://github.com/rust-lang/rust/pull/110785, it was pointed out that `--print KIND=PATH` is nicer than trying to apply the single global `-o path` to `--print`'s output, because in general there can be multiple print requests within a single rustc invocation, and anyway `-o` would already be used for a different meaning in the case of `link-args` and `native-static-libs`.
>
> I am interested in using `--print cfg=PATH` in Buck2. Currently Buck2 works around the lack of support for `--print KIND=PATH` by [indirecting through a Python wrapper script](https://github.com/facebook/buck2/blob/d43cf3a51a31f00be2c2248e78271b0fef0452b4/prelude/rust/tools/get_rustc_cfg.py) to redirect rustc's stdout into the location dictated by the build system.
>
> From skimming Cargo's usages of `--print`, it definitely seems like it would benefit from `--print KIND=PATH` too. Currently it is working around the lack of this by inserting `--crate-name=___ --print=crate-name` so that it can look for a line containing `___` as a delimiter between the 2 other `--print` informations it actually cares about. This is commented as a "HACK" and "abuse". https://github.com/rust-lang/cargo/blob/31eda6f7c360d9911f853b3014e057db61238f3e/src/cargo/core/compiler/build_context/target_info.rs#L242
-----
cc `@dtolnay`
r? `@jackh726`
|
|
Description of the `PATH` option:
> A filepath may optionally be specified for each requested information
> kind, in the format `--print KIND=PATH`, just like for `--emit`. When
> a path is specified, information will be written there instead of to
> stdout.
|
|
Since `filename_for_metadata()` and
`OutputFilenames::path(OutputType::Metadata)` had different logic for
the name of the metadata file, the `.d` file contained a file name
different from the actual name used. Share the logic to fix the
out-of-sync name.
Closes 68839.
|
|
|
|
|
|
|
|
Add an (perma-)unstable option to disable vtable vptr
This flag is intended for evaluation of trait upcasting space cost for embedded use cases.
Compared to the approach in #112355, this option provides a way to evaluate end-to-end cost of trait upcasting. Rationale: https://github.com/rust-lang/rust/issues/112355#issuecomment-1658207769
## How this flag should be used (after merge)
Build your project with and without `-Zno-trait-vptr` flag. If you are using cargo, set `RUSTFLAGS="-Zno-trait-vptr"` in the environment variable. You probably also want to use `-Zbuild-std` or the binary built may be broken. Save both binaries somewhere.
### Evaluate the space cost
The option has a direct and indirect impact on vtable space usage. Directly, it gets rid of the trait vptr entry needed to store a pointer to a vtable of a supertrait. (IMO) this is a small saving usually. The larger saving usually comes with the indirect saving by eliminating the vtable of the supertrait (and its parent).
Both impacts only affects vtables (notably the number of functions monomorphized should , however where vtable reside can depend on your relocation model. If the relocation model is static, then vtable is rodata (usually stored in Flash/ROM together with text in embedded scenario). If the binary is relocatable, however, the vtable will live in `.data` (more specifically, `.data.rel.ro`), and this will need to reside in RAM (which may be a more scarce resource in some cases), together with dynamic relocation info living in readonly segment.
For evaluation, you should run `size` on both binaries, with and without the flag. `size` would output three columns, `text`, `data`, `bss` and the sum `dec` (and it's hex version). As explained above, both `text` and `data` may change. `bss` shouldn't usually change. It'll be useful to see:
* Percentage change in text + data (indicating required flash/ROM size)
* Percentage change in data + bss (indicating required RAM size)
|
|
Include compiler flags when you `break rust;`
Closes #70661
r? `@RalfJung` who requested this feature :)
|
|
Update bootstrap compiler to 1.73.0 beta
|
|
To make it available to other parts of the compiler.
|
