| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
The previous commit updated `rustfmt.toml` appropriately. This commit is
the outcome of running `x fmt --all` with the new formatting options.
|
|
Gate the type length limit check behind a nightly flag
Effectively disables the type length limit by introducing a `-Zenforce-type-length-limit` which defaults to **`false`**, since making the length limit actually be enforced ended up having a worse fallout than expected. We still keep the code around, but the type length limit attr is now a noop (except for its usage in some diagnostics code?).
r? `@lcnr` -- up to you to decide what team consensus we need here since this reverses an FCP decision.
Reopens #125460 (if we decide to reopen it or keep it closed)
Effectively reverses the decision FCP'd in #125507
Closes #127346
|
|
r=Mark-Simulacrum
use "bootstrap" instead of "rustbuild" in comments and docs
Let's stick with the single name "bootstrap" to refer to the bootstrap project to avoid confusion. This should make it clearer, especially for new contributors.
|
|
|
|
Ignore allocation bytes in some mir-opt tests
This adds `rustc -Zdump-mir-exclude-alloc-bytes` to skip writing allocation bytes in MIR dumps, and applies it to tests that were failing on s390x due to its big-endian byte order.
Fixes #126261
|
|
Signed-off-by: onur-ozkan <work@onurozkan.dev>
|
|
Since this codegen flag now only controls LLVM-generated comments rather than
all assembly comments, make the name more accurate (and also match Clang).
|
|
In 126578 we ended up with more binary size increases than expected.
This change attempts to avoid inlining large things into small things, to avoid that kind of increase, in cases when top-down inlining will still be able to do that inlining later.
|
|
r=estebank,workingjubilee
patchable-function-entry: Add unstable compiler flag and attribute
Tracking issue: #123115
Add the -Z patchable-function-entry compiler flag and the #[patchable_function_entry(prefix_nops = m, entry_nops = n)] attribute.
Rebased and adjusted the canditate implementation to match changes in the RFC.
|
|
|
|
tests
|
|
`-Z patchable-function-entry` works like `-fpatchable-function-entry`
on clang/gcc. The arguments are total nop count and function offset.
See MCP rust-lang/compiler-team#704
|
|
Un-unsafe the `StableOrd` trait
Whilst incorrect implementations of this trait can cause miscompilation, they cannot cause memory unsafety in rustc.
[Discussed on Zulip](https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Policy.20of.20.60unsafe.60.20within.20the.20compiler).
cc [MCP 533](https://github.com/rust-lang/compiler-team/issues/533), #105175, `@michaelwoerister`
r? `@Nilstrieb`
|
|
Deprecate no-op codegen option `-Cinline-threshold=...`
This deprecates `-Cinline-threshold` since using it has no effect. This has been the case since the new LLVM pass manager started being used, more than 2 years ago.
Recommend using `-Cllvm-args=--inline-threshold=...` instead.
Closes #89742 which is E-help-wanted.
|
|
|
|
Also lands behind -Zunstable-options, for now.
Take the opportunity to do some mild cleanup.
|
|
Requires -Zunstable-options as this is a -C flag already.
|
|
|
|
Added an associated `const THIS_IMPLEMENTATION_HAS_BEEN_TRIPLE_CHECKED`
to the `StableOrd` trait to ensure that implementors carefully consider
whether the trait's contract is upheld, as incorrect implementations can
cause miscompilations.
|
|
Most modules have such a blank line, but some don't. Inserting the blank
line makes it clearer that the `//!` comments are describing the entire
module, rather than the `use` declaration(s) that immediately follows.
|
|
This commit is a continuation of the work originally proposed in
rust-lang/compiler-team#607 and later amended in
rust-lang/compiler-team#695. The end goal is to rename `wasm32-wasi` to
`wasm32-wasip1` to reflect WASI's development and distinguish the
preexisting target from the `wasm32-wasip2` target that WASI is now
developing. Work for this transition began in #120468 which landed in
Rust 1.78 which became stable on 2024-05-02.
This implements the next phase of the transition plan to warn on usage
of `wasm32-wasi`. This is intended to help alert users that a removal is
pending and all release channels have the replacement available as well.
This will reach stable on 2024-09-05. The next stage of the plan is to
remove the `wasm32-wasi` target some time in October 2024 which means
that the removal will reach stable on 2025-01-09. For reference a full
schedule of this transition is listed [here].
Currently this implementation is a simple unconditional warning whenever
`rustc --target wasm32-wasi` is invoked. As-implemented there's no way
to turn off the warning other than to switch to the `wasm32-wasip1`
target.
[here]: https://github.com/rust-lang/rust/pull/120468#issuecomment-1977878747
|
|
Replace all `&DiagCtxt` with a `DiagCtxtHandle<'_>` wrapper type
r? `@davidtwco`
This paves the way for tracking more state (e.g. error tainting) in the diagnostic context handle
Basically I will add a field to the `DiagCtxtHandle` that refers back to the `InferCtxt`'s (and others) `Option<ErrorHandled>`, allowing us to immediately taint these contexts when emitting an error and not needing manual tainting anymore (which is easy to forget and we don't do in general anyway)
|
|
|
|
This paves the way for tracking more state (e.g. error tainting) in the diagnostic context handle
|
|
|
|
When set, this flag skips the code that normally extracts coverage spans from
MIR statements and terminators. That sometimes makes it easier to debug branch
coverage and MC/DC coverage, because the coverage output is less noisy.
For internal debugging only. If other code changes would make it hard to keep
supporting this flag, remove it.
|
|
This deprecates `-Cinline-threshold` since using it has no effect. This
has been the case since the new LLVM pass manager started being used,
more than 2 years ago.
|
|
Whilst incorrect implementations of this trait can cause miscompilation,
they cannot cause memory unsafety in rustc.
|
|
We already do this for a number of crates, e.g. `rustc_middle`,
`rustc_span`, `rustc_metadata`, `rustc_span`, `rustc_errors`.
For the ones we don't, in many cases the attributes are a mess.
- There is no consistency about order of attribute kinds (e.g.
`allow`/`deny`/`feature`).
- Within attribute kind groups (e.g. the `feature` attributes),
sometimes the order is alphabetical, and sometimes there is no
particular order.
- Sometimes the attributes of a particular kind aren't even grouped
all together, e.g. there might be a `feature`, then an `allow`, then
another `feature`.
This commit extends the existing sorting to all compiler crates,
increasing consistency. If any new attribute line is added there is now
only one place it can go -- no need for arbitrary decisions.
Exceptions:
- `rustc_log`, `rustc_next_trait_solver` and `rustc_type_ir_macros`,
because they have no crate attributes.
- `rustc_codegen_gcc`, because it's quasi-external to rustc (e.g. it's
ignored in `rustfmt.toml`).
|
|
Simplify the path operation with `join`, clarify some of the names.
|
|
|
|
Add `-Zfixed-x18`
This PR is a follow-up to #124323 that proposes a different implementation. Please read the description of that PR for motivation.
See the equivalent flag in [the clang docs](https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-ffixed-x18).
MCP: https://github.com/rust-lang/compiler-team/issues/748
Fixes https://github.com/rust-lang/rust/issues/121970
r? rust-lang/compiler
|
|
Add `--print=check-cfg` to get the expected configs
This PR adds a new `--print` variant `check-cfg` to get the expected configs.
Details and rational can be found on the MCP: https://github.com/rust-lang/compiler-team/issues/743
``@rustbot`` label +F-check-cfg +S-waiting-on-MCP
r? ``@petrochenkov``
|
|
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
|
|
Remove many `#[macro_use] extern crate foo` items
This requires the addition of more `use` items, which often make the code more verbose. But they also make the code easier to read, because `#[macro_use]` obscures where macros are defined.
r? `@fee1-dead`
|
|
|
|
|
|
|
|
`#[collapse_debuginfo]`
`-Z debug-macros` is "stabilized" by enabling it by default and removing.
`-Z collapse-macro-debuginfo` is stabilized as `-C collapse-macro-debuginfo`.
It now supports all typical boolean values (`parse_opt_bool`) in addition to just yes/no.
Default value of `collapse_debuginfo` was changed from `false` to `external` (i.e. collapsed if external, not collapsed if local).
`#[collapse_debuginfo]` attribute without a value is no longer supported to avoid guessing the default.
|
|
|
|
Minor AST cleanups
r? ``@estebank``
|
|
Improve diagnostic for unknown `--print` request
This PR improves the diagnostic when encountering a unknown `--print` request.
It also moves the run-make test to a simple UI test.
|
|
|
|
|
