| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
add `Vec::extend_from_within` method under `vec_extend_from_within` feature gate
Implement <https://github.com/rust-lang/rfcs/pull/2714>
### tl;dr
This PR adds a `extend_from_within` method to `Vec` which allows copying elements from a range to the end:
```rust
#![feature(vec_extend_from_within)]
let mut vec = vec![0, 1, 2, 3, 4];
vec.extend_from_within(2..);
assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4]);
vec.extend_from_within(..2);
assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4, 0, 1]);
vec.extend_from_within(4..8);
assert_eq!(vec, [0, 1, 2, 3, 4, 2, 3, 4, 0, 1, 4, 2, 3, 4]);
```
### Implementation notes
Originally I've copied `@Shnatsel's` [implementation](https://github.com/WanzenBug/rle-decode-helper/blob/690742a0de158d391b7bde1a0c71cccfdad33ab3/src/lib.rs#L74) with some minor changes to support other ranges:
```rust
pub fn append_from_within<R>(&mut self, src: R)
where
T: Copy,
R: RangeBounds<usize>,
{
let len = self.len();
let Range { start, end } = src.assert_len(len);;
let count = end - start;
self.reserve(count);
unsafe {
// This is safe because `reserve()` above succeeded,
// so `self.len() + count` did not overflow usize
ptr::copy_nonoverlapping(
self.get_unchecked(src.start),
self.as_mut_ptr().add(len),
count,
);
self.set_len(len + count);
}
}
```
But then I've realized that this duplicates most of the code from (private) `Vec::append_elements`, so I've used it instead.
Then I've applied `@KodrAus` suggestions from https://github.com/rust-lang/rust/pull/79015#issuecomment-727200852.
|
|
Implement <https://github.com/rust-lang/rfcs/pull/2714>, changes from the RFC:
- Rename the method `append_from_within` => `extend_from_within`
- Loose :Copy bound => :Clone
- Specialize in case of :Copy
This commit also adds `Vec::split_at_spare` private method and use it to implement
`Vec::spare_capacity_mut` and `Vec::extend_from_within`. This method returns 2
slices - initialized elements (same as `&mut vec[..]`) and uninitialized but
allocated space (same as `vec.spare_capacity_mut()`).
|
|
|
|
|
|
Closes #72360.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
|
|
The return of the GroupBy and GroupByMut iterators on slice
According to https://github.com/rust-lang/rfcs/pull/2477#issuecomment-742034372, I am opening this PR again, this time I implemented it in safe Rust only, it is therefore much easier to read and is completely safe.
This PR proposes to add two new methods to the slice, the `group_by` and `group_by_mut`. These two methods provide a way to iterate over non-overlapping sub-slices of a base slice that are separated by the predicate given by the user (e.g. `Partial::eq`, `|a, b| a.abs() < b.abs()`).
```rust
let slice = &[1, 1, 1, 3, 3, 2, 2, 2];
let mut iter = slice.group_by(|a, b| a == b);
assert_eq!(iter.next(), Some(&[1, 1, 1][..]));
assert_eq!(iter.next(), Some(&[3, 3][..]));
assert_eq!(iter.next(), Some(&[2, 2, 2][..]));
assert_eq!(iter.next(), None);
```
[An RFC](https://github.com/rust-lang/rfcs/pull/2477) was open 2 years ago but wasn't necessary.
|
|
stabilize deque_range
Make #74217 stable, stabilizing `VecDeque::range` and `VecDeque::range_mut`.
Pr: #74099
r? `@m-ou-se`
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Move Vec UI tests to unit tests when possible
Helps with #76268.
I'm moving the tests using `Vec` or `VecDeque`.
````@rustbot```` modify labels: A-testsuite C-cleanup T-libs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add PartialEq impls for Vec <-> slice
This is a follow-up to #71660 and rust-lang/rfcs#2917 to add two more missing vec/slice PartialEq impls:
```
impl<A, B> PartialEq<[B]> for Vec<A> where A: PartialEq<B> { .. }
impl<A, B> PartialEq<Vec<B>> for [A] where A: PartialEq<B> { .. }
```
Since this is insta-stable, it should go through the `@rust-lang/libs` FCP process. Note that I used version 1.47.0 for the `stable` attribute because I assume this will not merge before the 1.46.0 branch is cut next week.
|
|
UI to unit test for those using Cell/RefCell/UnsafeCell
Helps with #76268.
I'm working on all files using `Cell` and moving them to unit tests when possible.
r? @matklad
|
|
|
|
Changing the alloc() to accept &self instead of &mut self
Fixes: [#55](https://github.com/rust-lang/wg-allocators/issues/55)
This is the first cut. It only makes the change for `alloc` method.
|
|
This may not be strictly minimal, but all unstable functions also need a
`rustc_const_unstable` attribute.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fix liballoc test suite for Miri
Mostly, fix the regression introduced by https://github.com/rust-lang/rust/pull/75207 that caused slices (i.e., references) to be created to invalid memory or memory that has aliasing pointers that we want to keep valid. @dylni this changes the type of `check_range` to only require the length, not the full reference to the slice, which indeed is all the information this function requires.
Also reduce the size of a test introduced in https://github.com/rust-lang/rust/pull/70793 to make it not take 3 minutes in Miri.
This makes https://github.com/RalfJung/miri-test-libstd work again.
|
|
r=jyn514
Move Various str tests in library
Moved various string ui tests in library as a part of #76268
r? @matklad
|
|
Use translated variable for test string
Test should be educative, added english translation and pronounciation.
|
|
Detect overflow in proc_macro_server subspan
* Detect overflow in proc_macro_server subspan
* Add tests for overflow in Vec::drain
* Add tests for overflow in String / VecDeque operations using ranges
|
|
|
|
|
|
Optimize behavior of vec.split_off(0) (take all)
Optimization improvement to `split_off()` so the performance meets the
intuitively expected behavior when `at == 0`, avoiding the current behavior
of copying the entire vector.
The change honors documented behavior that the original vector's
"previous capacity unchanged".
This improvement better supports the pattern for building and flushing a
buffer of elements, such as the following:
```rust
let mut vec = Vec::new();
loop {
vec.push(something);
if condition_is_met {
process(vec.split_off(0));
}
}
```
`Option` wrapping is the first alternative I thought of, but is much
less obvious and more verbose:
```rust
let mut capacity = 1;
let mut vec: Option<Vec<Stuff>> = None;
loop {
vec.get_or_insert_with(|| Vec::with_capacity(capacity)).push(something);
if condition_is_met {
capacity = vec.capacity();
process(vec.take().unwrap());
}
}
```
Directly using `mem::replace()` (instead of calling`split_off()`) could work,
but `mem::replace()` is a more advanced tool for Rust developers, and in
this case, I believe developers would assume the standard library should
be sufficient for the purpose described here.
The benefit of the approach to this change is it does not change the
existing API contract, but improves the peformance of `split_off(0)` for
`Vec`, `String` (which delegates `split_off()` to `Vec`), and any other
existing use cases.
This change adds tests to validate the behavior of `split_off()` with
regard to capacity, as originally documented, and confirm that behavior
still holds, when `at == 0`.
The change is an implementation detail, and does not require a
documentation change, but documenting the new behavior as part of its
API contract may benefit future users.
(Let me know if I should make that documentation update.)
Note, for future consideration:
I think it would be helpful to introduce an additional method to `Vec`
(if not also to `String`):
```
pub fn take_all(&mut self) -> Self {
self.split_off(0)
}
```
This would make it more clear how `Vec` supports the pattern, and make
it easier to find, since the behavior is similar to other `take()`
methods in the Rust standard library.
r? `@wesleywiser`
FYI: `@tmandry`
|
|
Optimization improvement to `split_off()` so the performance meets the
intuitively expected behavior when `at == 0`, avoiding the current
behavior of copying the entire vector.
The change honors documented behavior that the method leaves the
original vector's "previous capacity unchanged".
This improvement better supports the pattern for building and flushing a
buffer of elements, such as the following:
```rust
let mut vec = Vec::new();
loop {
vec.push(something);
if condition_is_met {
process(vec.split_off(0));
}
}
```
`Option` wrapping is the first alternative I thought of, but is much
less obvious and more verbose:
```rust
let mut capacity = 1;
let mut vec: Option<Vec<Stuff>> = None;
loop {
vec.get_or_insert_with(|| Vec::with_capacity(capacity)).push(something);
if condition_is_met {
capacity = vec.capacity();
process(vec.take().unwrap());
}
}
```
Directly applying `mem::replace()` could work, but `mem::` functions are
typically a last resort, when a developer is actively seeking better
performance than the standard library provides, for example.
The benefit of the approach to this change is it does not change the
existing API contract, but improves the peformance of `split_off(0)` for
`Vec`, `String` (which delegates `split_off()` to `Vec`), and any other
existing use cases.
This change adds tests to validate the behavior of `split_off()` with
regard to capacity, as originally documented, and confirm that behavior
still holds, when `at == 0`.
The change is an implementation detail, and does not require a
documentation change, but documenting the new behavior as part of its
API contract may benefit future users.
(Let me know if I should make that documentation update.)
Note, for future consideration:
I think it would be helpful to introduce an additional method to `Vec`
(if not also to `String`):
```
pub fn take_all(&mut self) -> Self {
self.split_off(0)
}
```
This would make it more clear how `Vec` supports the pattern, and make
it easier to find, since the behavior is similar to other `take()`
methods in the Rust standard library.
|
|
|
|
Added str tests in library
Added str tests in library as a part of #76268
r? @matklad
|
|
Move Vec slice UI tests in library
Moved some of Vec slice UI tests in Library as a part of #76268
r? @matklad
|
