| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Make `ReentrantMutex` movable and `const`
As `MovableMutex` is now `const`, it can be used to simplify the implementation and interface of the internal reentrant mutex type. Consequently, the standard error stream does not need to be wrapped in `OnceLock` and `OnceLock::get_or_init_pin()` can be removed.
|
|
|
|
This makes it possible to instruct libstd to never touch the signal
handler for `SIGPIPE`, which makes programs pipeable by default (e.g.
with `./your-program | head -n 1`) without `ErrorKind::BrokenPipe`
errors.
|
|
std::io: migrate ReadBuf to BorrowBuf/BorrowCursor
This PR replaces `ReadBuf` (used by the `Read::read_buf` family of methods) with `BorrowBuf` and `BorrowCursor`.
The general idea is to split `ReadBuf` because its API is large and confusing. `BorrowBuf` represents a borrowed buffer which is mostly read-only and (other than for construction) deals only with filled vs unfilled segments. a `BorrowCursor` is a mostly write-only view of the unfilled part of a `BorrowBuf` which distinguishes between initialized and uninitialized segments. For `Read::read_buf`, the caller would create a `BorrowBuf`, then pass a `BorrowCursor` to `read_buf`.
In addition to the major API split, I've made the following smaller changes:
* Removed some methods entirely from the API (mostly the functionality can be replicated with two calls rather than a single one)
* Unified naming, e.g., by replacing initialized with init and assume_init with set_init
* Added an easy way to get the number of bytes written to a cursor (`written` method)
As well as simplifying the API (IMO), this approach has the following advantages:
* Since we pass the cursor by value, we remove the 'unsoundness footgun' where a malicious `read_buf` could swap out the `ReadBuf`.
* Since `read_buf` cannot write into the filled part of the buffer, we prevent the filled part shrinking or changing which could cause underflow for the caller or unexpected behaviour.
## Outline
```rust
pub struct BorrowBuf<'a>
impl Debug for BorrowBuf<'_>
impl<'a> From<&'a mut [u8]> for BorrowBuf<'a>
impl<'a> From<&'a mut [MaybeUninit<u8>]> for BorrowBuf<'a>
impl<'a> BorrowBuf<'a> {
pub fn capacity(&self) -> usize
pub fn len(&self) -> usize
pub fn init_len(&self) -> usize
pub fn filled(&self) -> &[u8]
pub fn unfilled<'this>(&'this mut self) -> BorrowCursor<'this, 'a>
pub fn clear(&mut self) -> &mut Self
pub unsafe fn set_init(&mut self, n: usize) -> &mut Self
}
pub struct BorrowCursor<'buf, 'data>
impl<'buf, 'data> BorrowCursor<'buf, 'data> {
pub fn clone<'this>(&'this mut self) -> BorrowCursor<'this, 'data>
pub fn capacity(&self) -> usize
pub fn written(&self) -> usize
pub fn init_ref(&self) -> &[u8]
pub fn init_mut(&mut self) -> &mut [u8]
pub fn uninit_mut(&mut self) -> &mut [MaybeUninit<u8>]
pub unsafe fn as_mut(&mut self) -> &mut [MaybeUninit<u8>]
pub unsafe fn advance(&mut self, n: usize) -> &mut Self
pub fn ensure_init(&mut self) -> &mut Self
pub unsafe fn set_init(&mut self, n: usize) -> &mut Self
pub fn append(&mut self, buf: &[u8])
}
```
## TODO
* ~~Migrate non-unix libs and tests~~
* ~~Naming~~
* ~~`BorrowBuf` or `BorrowedBuf` or `SliceBuf`? (We might want an owned equivalent for the async IO traits)~~
* ~~Should we rename the `readbuf` module? We might keep the name indicate it includes both the buf and cursor variations and someday the owned version too. Or we could change it. It is not publicly exposed, so it is not that important~~.
* ~~`read_buf` method: we read into the cursor now, so the `_buf` suffix is a bit weird.~~
* ~~Documentation~~
* Tests are incomplete (I adjusted existing tests, but did not add new ones).
cc https://github.com/rust-lang/rust/issues/78485, https://github.com/rust-lang/rust/issues/94741
supersedes: https://github.com/rust-lang/rust/pull/95770, https://github.com/rust-lang/rust/pull/93359
fixes #93305
|
|
Signed-off-by: Nick Cameron <nrc@ncameron.org>
|
|
cleanup code w/ pointers in std a little
Use pointer methods (`byte_add`, `null_mut`, etc) to make code in std a little nicer.
|
|
|
|
Signed-off-by: Nick Cameron <nrc@ncameron.org>
|
|
|
|
Support setting file accessed/modified timestamps
Add `struct FileTimes` to contain the relevant file timestamps, since
most platforms require setting all of them at once. (This also allows
for future platform-specific extensions such as setting creation time.)
Add `File::set_file_time` to set the timestamps for a `File`.
Implement the `sys` backends for UNIX, macOS (which needs to fall back
to `futimes` before macOS 10.13 because it lacks `futimens`), Windows,
and WASI.
|
|
|
|
Add `struct FileTimes` to contain the relevant file timestamps, since
most platforms require setting all of them at once. (This also allows
for future platform-specific extensions such as setting creation time.)
Add `File::set_file_time` to set the timestamps for a `File`.
Implement the `sys` backends for UNIX, macOS (which needs to fall back
to `futimes` before macOS 10.13 because it lacks `futimens`), Windows,
and WASI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This removes all mutex/atomics based workarounds for non-monotonic clocks and makes the previously panicking methods saturating instead.
Effectively this moves the monotonization from `Instant` construction to the comparisons.
This has some observable effects, especially on platforms without monotonic clocks:
* Incorrectly ordered Instant comparisons no longer panic. This may hide some programming errors until someone actually looks at the resulting `Duration`
* `checked_duration_since` will now return `None` in more cases. Previously it only happened when one compared instants obtained in the wrong order or
manually created ones. Now it also does on backslides.
The upside is reduced complexity and lower overhead of `Instant::now`.
|
|
Add From<u8> for ExitCode
This should cover a mostly cross-platform subset of supported exit codes.
We decided to stick with `u8` initially since its the common subset between all platforms that we support (excluding wasm which I think only works with `true` or `false`). Posix is supposed to take i32s, but in practice many unix platforms mask out all but the low 8 bits or in some cases the 8-15th bits. Windows takes a u32 instead of an i32. Bourne-compatible shells also report signals as exitcode 128 + `signal_no`, so there's some ambiguity there when returning exit codes > 127, but it is possible to disambiguate them on the other side so we decided against restricting the possible codes further than to `u8`.
## Related
- Detailed analysis of exit code support on various platforms: https://internals.rust-lang.org/t/mini-pre-rfc-redesigning-process-exitstatus/5426
- https://github.com/rust-lang/rust/issues/48711
- https://github.com/rust-lang/rust/issues/43301
- https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Termination.2FExit.20Status.20Stabilization
|
|
|
|
This should cover a mostly cross-platform subset of supported exit codes.
|
|
|
|
Co-authored-by: Josh Triplett <josh@joshtriplett.org>
|
|
|
|
`std::thread::available_parallelism`
|
|
|
|
Move `os_str_bytes` to `sys::unix`
Followup to #84967, with `OsStrExt` and `OsStringExt` moved out of `sys_common`, there is no reason anymore for `os_str_bytes` to live in `sys_common` and not in sys. This pr moves it to the location `sys::unix::os_str` and reuses the code on other platforms via `#[path]` (as is common in `sys`) instead of importing.
|
|
|
|
|
|
Redefine `ErrorKind::Other` and stop using it in std.
This implements the idea I shared yesterday in the libs meeting when we were discussing how to handle adding new `ErrorKind`s to the standard library: This redefines `Other` to be for *user defined errors only*, and changes all uses of `Other` in the standard library to a `#[doc(hidden)]` and permanently `#[unstable]` `ErrorKind` that users can not match on. This ensures that adding `ErrorKind`s at a later point in time is not a breaking change, since the user couldn't match on these errors anyway. This way, we use the `#[non_exhaustive]` property of the enum in a more effective way.
Open questions:
- How do we check this change doesn't cause too much breakage? Will a crate run help and be enough?
- How do we ensure we don't accidentally start using `Other` again in the standard library? We don't have a `pub(not crate)` or `#[deprecated(in this crate only)]`.
cc https://github.com/rust-lang/rust/pull/79965
cc `@rust-lang/libs` `@ijackson`
r? `@dtolnay`
|
|
|
|
|
|
|
|
|
|
- Split `sys_common::RWLock` between `StaticRWLock` and `MovableRWLock`
- Unbox `RwLock` on some platforms (Windows, Wasm and unsupported)
- Simplify `RwLock::into_inner`
|
|
can specialize it
Windows implementation of `fs::try_exists`
|
|
Closes #73125
This is in pursuance of
Issue #73127 Consider adding #[must_use] to std::process::ExitStatus
In
MR #81452 Add #[must_use] to [...] process::ExitStatus
we concluded that the existing arrangements in are too awkward
so adding that #[must_use] is blocked on improving the ergonomics.
I wrote a mini-RFC-style discusion of the approach in
https://github.com/rust-lang/rust/issues/73125#issuecomment-771092741
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
|
|
Cleanup of `wasm`
Some more cleanup of `sys`, this time `wasm`
- Reuse `unsupported::args` (functionally equivalent implementation, just an empty iterator).
- Split out `atomics` implementation of `wasm::thread`, the non-`atomics` implementation is reused from `unsupported`.
- Move all of the `atomics` code to a separate directory `wasm/atomics`.
````@rustbot```` label: +T-libs-impl
r? ````@m-ou-se````
|
|
Reuse `sys::unix::cmath` on other platforms
Reuse `sys::unix::cmath` on all non-`windows` platforms.
`unix` is chosen as the canonical location instead of `unsupported` or `common` because `unsupported` doesn't make sense semantically and `common` is reserved for code that is supported on all platforms. Also `unix` is already the home of some non-`windows` code that is technically not exclusive to `unix` like `unix::path`.
|
|
|
|
|
|
Rework `init` and `cleanup`
This PR reworks the code in `std` that runs before and after `main` and centralizes this code respectively in the functions `init` and `cleanup` in both `sys_common` and `sys`. This makes is easy to see what code is executed during initialization and cleanup on each platform just by looking at e.g. `sys::windows::init`.
Full list of changes:
- new module `rt` in `sys_common` to contain `init` and `cleanup` and the runtime macros.
- `at_exit` and the mechanism to register exit handlers has been completely removed. In practice this was only used for closing sockets on windows and flushing stdout, which have been moved to `cleanup`.
- <s>On windows `alloc` and `net` initialization is now done in `init`, this saves a runtime check in every allocation and network use.</s>
|
|
Remove `sys::args::Args::inner_debug` and use `Debug` instead
This removes the method `sys::args::Args::inner_debug` on all platforms and implements `Debug` for `Args` instead.
I believe this creates a more natural API for the different platforms under `sys`: export a type `Args: Debug + Iterator + ...` vs. `Args: Iterator + ...` and with a method `inner_debug`.
|
|
|
|
|
|
|
