| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Each recursive call was creating an `OsString` for a `&Path`, only for
it to be turned into a `CString` right away. Instead we can directly
pass `.name_cstr()`, saving two allocations each time.
|
|
|
|
fs: Don't dereference a pointer to a too-small allocation
ptr::addr_of!((*ptr).field) still requires ptr to point to an
appropriate allocation for its type. Since the pointer returned by
readdir() can be smaller than sizeof(struct dirent), we need to entirely
avoid dereferencing it as that type.
Link: https://github.com/rust-lang/miri/pull/1981#issuecomment-1048278492
Link: https://github.com/rust-lang/rust/pull/93459#discussion_r795089971
|
|
Unix path::absolute: Fix leading "." component
Testing leading `.` and `..` components were missing from the unix tests.
This PR adds them and fixes the leading `.` case. It also fixes the test cases so that they do an exact comparison.
This problem reported by ``@axetroy``
|
|
Testing leading `.` and `..` components were missing from the unix tests.
|
|
|
|
UNIX `remove_dir_all()`: Try recursing first on the slow path
This only affects the _slow_ code path - if there is no `dirent.d_type` or if it is `DT_UNKNOWN`.
POSIX specifies that calling `unlink()` or `unlinkat(..., 0)` on a directory is allowed to succeed:
> The _path_ argument shall not name a directory unless the process has appropriate privileges and the implementation supports using _unlink()_ on directories.
This however can cause dangling inodes requiring an fsck e.g. on Illumos UFS, so we have to avoid that in the common case. We now just try to recurse into it first and unlink() if we can't open it as a directory.
The other two commits integrate the Macos x86-64 implementation reducing redundancy. Split into two commits for better reviewing.
Fixes #94335.
|
|
Don't round stack size up for created threads in Windows
Fixes #94454
Windows does the rounding itself, so there isn't a need to explicity do the rounding beforehand, as mentioned by ```@ChrisDenton``` in #94454
> The operating system rounds up the specified size to the nearest multiple of the system's allocation granularity (typically 64 KB). To retrieve the allocation granularity of the current system, use the [GetSystemInfo](https://docs.microsoft.com/en-us/windows/win32/api/sysinfoapi/nf-sysinfoapi-getsysteminfo) function.
https://docs.microsoft.com/en-us/windows/win32/procthread/thread-stack-size
|
|
|
|
|
|
|
|
This only affects the `slow` code path, if there is no `dirent.d_type` or if
the type is `DT_UNKNOWN`.
POSIX specifies that calling `unlink()` or `unlinkat(..., 0)` on a directory can
succeed:
> "The _path_ argument shall not name a directory unless the process has
> appropriate privileges and the implementation supports using _unlink()_ on
> directories."
This however can cause orphaned directories requiring an fsck e.g. on Illumos
UFS, so we have to avoid that in the common case. We now just try to recurse
into it first and unlink() if we can't open it as a directory.
|
|
Use `HandleOrNull` and `HandleOrInvalid` in the Windows FFI bindings.
Use the new `HandleOrNull` and `HandleOrInvalid` types that were introduced
as part of [I/O safety] in a few functions in the Windows FFI bindings.
This factors out an `unsafe` block and two `unsafe` function calls in the
Windows implementation code.
And, it helps test `HandleOrNull` and `HandleOrInvalid`, and indeed, it
turned up a bug: `OwnedHandle` also needs to be `#[repr(transparent)]`,
as it's used inside of `HandleOrNull` and `HandleOrInvalid` which are also
`#[repr(transparent)]`.
r? ```@joshtriplett```
[I/O safety]: https://github.com/rust-lang/rust/issues/87074
|
|
Use the new `HandleOrNull` and `HandleOrInvalid` types that were introduced
as part of [I/O safety] in a few functions in the Windows FFI bindings.
This factors out an `unsafe` block and two `unsafe` function calls in the
Windows implementation code.
And, it helps test `HandleOrNull` and `HandleOrInvalid`, which indeed turned
up a bug: `OwnedHandle` also needs to be `#[repr(transparent)]`, as it's
used inside of `HandleOrNull` and `HandleOrInvalid` which are also
`#[repr(transparent)]`.
[I/O safety]: https://github.com/rust-lang/rust/issues/87074
|
|
Use cgroup quotas for calculating `available_parallelism`
Automated tests for this are possible but would require a bunch of assumptions. It requires root + a recent kernel, systemd and maybe docker. And even then it would need a helper binary since the test has to run in a separate process.
Limitations
* only supports cgroup v2 and assumes it's mounted under `/sys/fs/cgroup`
* procfs must be available
* the quota gets mixed into `sched_getaffinity`, so if the latter doesn't work then quota information gets ignored too
Manually tested via
```
// spawn a new cgroup scope for the current user
$ sudo systemd-run -p CPUQuota="300%" --uid=$(id -u) -tdS
// quota.rs
#![feature(available_parallelism)]
fn main() {
println!("{:?}", std::thread::available_parallelism()); // prints Ok(3)
}
```
strace:
```
sched_getaffinity(3041643, 32, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47]) = 32
openat(AT_FDCWD, "/proc/self/cgroup", O_RDONLY|O_CLOEXEC) = 3
statx(0, NULL, AT_STATX_SYNC_AS_STAT, STATX_ALL, NULL) = -1 EFAULT (Bad address)
statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_BASIC_STATS|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0444, stx_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 0
read(3, "0::/system.slice/run-u31477.serv"..., 128) = 36
read(3, "", 92) = 0
close(3) = 0
statx(AT_FDCWD, "/sys/fs/cgroup/system.slice/run-u31477.service/cgroup.controllers", AT_STATX_SYNC_AS_STAT, STATX_ALL, {stx_mask=STATX_BASIC_STATS|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0444, stx_size=0, ...}) = 0
openat(AT_FDCWD, "/sys/fs/cgroup/system.slice/run-u31477.service/cpu.max", O_RDONLY|O_CLOEXEC) = 3
statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_BASIC_STATS|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0644, stx_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 0
read(3, "300000 100000\n", 20) = 14
read(3, "", 6) = 0
close(3) = 0
openat(AT_FDCWD, "/sys/fs/cgroup/system.slice/cpu.max", O_RDONLY|O_CLOEXEC) = 3
statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_BASIC_STATS|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0644, stx_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 0
read(3, "max 100000\n", 20) = 11
read(3, "", 9) = 0
close(3) = 0
openat(AT_FDCWD, "/sys/fs/cgroup/cpu.max", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
sched_getaffinity(0, 128, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47]) = 40
```
r? ```````@joshtriplett```````
cc ```````@yoshuawuyts```````
Tracking issue and previous discussion: #74479
|
|
Rename `BorrowedFd::borrow_raw_fd` to `BorrowedFd::borrow_raw`.
Also, rename `BorrowedHandle::borrow_raw_handle` and
`BorrowedSocket::borrow_raw_socket` to `BorrowedHandle::borrow_raw` and
`BorrowedSocket::borrow_raw`.
This is just a minor rename to reduce redundancy in the user code calling
these functions, and to eliminate an inessential difference between
`BorrowedFd` code and `BorrowedHandle`/`BorrowedSocket` code.
While here, add a simple test exercising `BorrowedFd::borrow_raw_fd`.
r? ``````@joshtriplett``````
|
|
this avoids parsing mountinfo which can be huge on some systems and
something might be emulating cgroup fs for sandboxing reasons which means
it wouldn't show up as mountpoint
additionally the new implementation operates on a single pathbuffer, reducing allocations
|
|
Manually tested via
```
// spawn a new cgroup scope for the current user
$ sudo systemd-run -p CPUQuota="300%" --uid=$(id -u) -tdS
// quota.rs
#![feature(available_parallelism)]
fn main() {
println!("{:?}", std::thread::available_parallelism()); // prints Ok(3)
}
```
Caveats
* cgroup v1 is ignored
* funky mountpoints (containing spaces, newlines or control chars) for cgroupfs will not be handled correctly since that would require unescaping /proc/self/mountinfo
The escaping behavior of procfs seems to be undocumented. systemd and docker default to `/sys/fs/cgroup` so it should be fine for most systems.
* quota will be ignored when `sched_getaffinity` doesn't work
* assumes procfs is mounted under `/proc` and cgroupfs mounted and readable somewhere in the directory tree
|
|
The ability to interoperate with C code via FFI is not limited to crates
using std; this allows using these types without std.
The existing types in `std::os::raw` become type aliases for the ones in
`core::ffi`. This uses type aliases rather than re-exports, to allow the
std types to remain stable while the core types are unstable.
This also moves the currently unstable `NonZero_` variants and
`c_size_t`/`c_ssize_t`/`c_ptrdiff_t` types to `core::ffi`, while leaving
them unstable.
|
|
use BOOL for TCP_NODELAY setsockopt value on Windows
This issue was found by the Wine project and mitigated there [^1].
Windows' setsockopt expects a BOOL (a typedef for int) for TCP_NODELAY
[^2]. Windows itself is forgiving and will accept any positive optlen and
interpret the first byte of *optval as the value, so this bug does not
affect Windows itself, but does affect systems implementing Windows'
interface more strictly, such as Wine. Wine was previously passing this
through to the host's setsockopt, where, e.g., Linux requires that
optlen be correct for the chosen option, and TCP_NODELAY expects an int.
[^1]: https://source.winehq.org/git/wine.git/commit/d6ea38f32dfd3edbe107a255c37e9f7f3da06ae7
[^2]: https://docs.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-setsockopt
|
|
ptr::addr_of!((*ptr).field) still requires ptr to point to an
appropriate allocation for its type. Since the pointer returned by
readdir() can be smaller than sizeof(struct dirent), we need to entirely
avoid dereferencing it as that type.
Link: https://github.com/rust-lang/miri/pull/1981#issuecomment-1048278492
Link: https://github.com/rust-lang/rust/pull/93459#discussion_r795089971
|
|
This issue was found by the Wine project and mitigated there [1].
Windows' documented interface for `setsockopt` expects a `BOOL` (a
`typedef` for `int`) for `TCP_NODELAY` [2]. Windows is forgiving and
will accept any positive length and interpret the first byte of
`*option_value` as the value, so this bug does not affect Windows
itself, but does affect systems implementing Windows' interface more
strictly, such as Wine. Wine was previously passing this through to the
host's `setsockopt`, where, e.g., Linux requires that `option_len` be
correct for the chosen option, and `TCP_NODELAY` expects an `int`.
[1]: https://source.winehq.org/git/wine.git/commit/d6ea38f32dfd3edbe107a255c37e9f7f3da06ae7
[2]: https://docs.microsoft.com/en-us/windows/win32/api/winsock/nf-winsock-setsockopt
|
|
|
|
removing architecture requirements for RustyHermit
RustHermit and HermitCore is able to run on aarch64 and x86_64. In the future these operating systems will also support RISC-V. Consequently, the dependency to a specific target should be removed.
The build process of `hermit-abi` fails if the architecture isn't supported.
|
|
kmc-solid: Use the filesystem thread-safety wrapper
Fixes the thread unsafety of the `std::fs` implementation used by the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets.
Neither the SOLID filesystem API nor built-in filesystem drivers guarantee thread safety by default. Although this may suffice in general embedded-system use cases, and in fact the API can be used from multiple threads without any problems in many cases, this has been a source of unsoundness in `std::sys::solid::fs`.
This commit updates the implementation to leverage the filesystem thread-safety wrapper (which uses a pluggable synchronization mechanism) to enforce thread safety. This is done by prefixing all paths passed to the filesystem API with `\TS`. (Note that relative paths aren't supported in this platform.)
|
|
|
|
|
|
|
|
|
|
`std::path::absolute`
Implements #59117 by adding a `std::path::absolute` function that creates an absolute path without reading the filesystem. This is intended to be a drop-in replacement for [`std::fs::canonicalize`](https://doc.rust-lang.org/std/fs/fn.canonicalize.html) in cases where it isn't necessary to resolve symlinks. It can be used on paths that don't exist or where resolving symlinks is unwanted. It can also be used to avoid circumstances where `canonicalize` might otherwise fail.
On Windows this is a wrapper around [`GetFullPathNameW`](https://docs.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-getfullpathnamew). On Unix it partially implements the POSIX [pathname resolution](https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_13) specification, stopping just short of actually resolving symlinks.
|
|
This removes all mutex/atomics based workarounds for non-monotonic clocks and makes the previously panicking methods saturating instead.
Effectively this moves the monotonization from `Instant` construction to the comparisons.
This has some observable effects, especially on platforms without monotonic clocks:
* Incorrectly ordered Instant comparisons no longer panic. This may hide some programming errors until someone actually looks at the resulting `Duration`
* `checked_duration_since` will now return `None` in more cases. Previously it only happened when one compared instants obtained in the wrong order or
manually created ones. Now it also does on backslides.
The upside is reduced complexity and lower overhead of `Instant::now`.
|
|
Rename `FilenameTooLong` to `InvalidFilename` and also use it for Windows' `ERROR_INVALID_NAME`
Address https://github.com/rust-lang/rust/issues/90940#issuecomment-970157931
`ERROR_INVALID_NAME` (i.e. "The filename, directory name, or volume label syntax is incorrect") happens if we pass an invalid filename, directory name, or label syntax, so mapping as `InvalidInput` is reasonable to me.
|
|
|
|
|
|
|
|
|
|
kmc-solid: Fix wait queue manipulation errors in the `Condvar` implementation
This PR fixes a number of bugs in the `Condvar` wait queue implementation used by the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets. These bugs can occur when there are multiple threads waiting on the same `Condvar` and sometimes manifest as an `unwrap` failure.
|
|
Neither the SOLID filesystem API nor built-in filesystems guarantee
thread safety by default. Although this may suffice in general embedded-
system use cases, and in fact the API can be used from multiple threads
without any problems in many cases, this has been a source of
unsoundness in `std::sys::solid::fs`.
This commit updates the `std` code to leverage the filesystem thread-
safety wrapper to enforce thread safety. This is done by prefixing all
paths passed to the filesystem API with `\TS`. (Note that relative paths
aren't supported in this platform.)
|
|
priorities
In ITRON, lower priority values mean higher priorities.
|
|
|
|
Add From<u8> for ExitCode
This should cover a mostly cross-platform subset of supported exit codes.
We decided to stick with `u8` initially since its the common subset between all platforms that we support (excluding wasm which I think only works with `true` or `false`). Posix is supposed to take i32s, but in practice many unix platforms mask out all but the low 8 bits or in some cases the 8-15th bits. Windows takes a u32 instead of an i32. Bourne-compatible shells also report signals as exitcode 128 + `signal_no`, so there's some ambiguity there when returning exit codes > 127, but it is possible to disambiguate them on the other side so we decided against restricting the possible codes further than to `u8`.
## Related
- Detailed analysis of exit code support on various platforms: https://internals.rust-lang.org/t/mini-pre-rfc-redesigning-process-exitstatus/5426
- https://github.com/rust-lang/rust/issues/48711
- https://github.com/rust-lang/rust/issues/43301
- https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Termination.2FExit.20Status.20Stabilization
|
|
Use `NtCreateFile` instead of `NtOpenFile` to open a file
Generally the internal `Nt*` functions should be avoided but when we do need to use one we should stick to the most commonly used for the job. To that end, this PR replaces `NtOpenFile` with `NtCreateFile`.
NOTE: The initial version of this comment hypothesised that this may help with some recent false positives from malware scanners. This hypothesis proved wrong. Sorry for the distraction.
|
|
|
|
|
|
|
|
Make io::Error use 64 bits on targets with 64 bit pointers.
I've wanted this for a long time, but didn't see a good way to do it without having extra allocation. When looking at it yesterday, it was more clear what to do for some reason.
This approach avoids any additional allocations, and reduces the size by half (8 bytes, down from 16). AFAICT it doesn't come additional runtime cost, and the compiler seems to do a better job with code using it.
Additionally, this `io::Error` has a niche (still), so `io::Result<()>` is *also* 64 bits (8 bytes, down from 16), and `io::Result<usize>` (used for lots of io trait functions) is 2x64 bits (16 bytes, down from 24 — this means on x86_64 it can use the nice rax/rdx 2-reg struct return). More generally, it shaves a whole 64 bit integer register off of the size of basically any `io::Result<()>`.
(For clarity: Improving `io::Result` (rather than io::Error) was most of the motivation for this)
On 32 bit (or other non-64bit) targets we still use something equivalent the old repr — I don't think think there's improving it, since one of the fields it stores is a `i32`, so we can't get below that, and it's already about as close as we can get to it.
---
### Isn't Pointer Tagging Dodgy?
The details of the layout, and why its implemented the way it is, are explained in the header comment of library/std/src/io/error/repr_bitpacked.rs. There's probably more details than there need to be, but I didn't trim it down that much, since there's a lot of stuff I did deliberately, that might have not seemed that way.
There's actually only one variant holding a pointer which gets tagged. This one is the (holder for the) user-provided error.
I believe the scheme used to tag it is not UB, and that it preserves pointer provenance (even though often pointer tagging does not) because the tagging operation is just `core::ptr::add`, and untagging is `core::ptr::sub`. The result of both operations lands inside the original allocation, so it would follow the safety contract of `core::ptr::{add,sub}`.
The other pointer this had to encode is not tagged — or rather, the tagged repr is equivalent to untagged (it's tagged with 0b00, and has >=4b alignment, so we can reuse the bottom bits). And the other variants we encode are just integers, which (which can be untagged using bitwise operations without worry — they're integers).
CC `@RalfJung` for the stuff in repr_bitpacked.rs, as my comments are informed by a lot of the UCG work, but it's possible I missed something or got it wrong (even if the implementation is okay, there are parts of the header comment that says things like "We can't do $x" which could be false).
---
### Why So Many Changes?
The repr change was mostly internal, but changed one widely used API: I had to switch how `io::Error::new_const` works.
This required switching `io::Error::new_const` to take the full message data (including the kind) as a `&'static`, rather than just the string. This would have been really tedious, but I made a macro that made it much simpler, but it was a wide change since `io::Error::new_const` is used everywhere.
This included changing files for a lot of targets I don't have easy access to (SGX? Haiku? Windows? Who has heard of these things), so I expect there to be spottiness in CI initially, unless luck is on my side.
Anyway this large only tangentially-related change is all in the first commit (although that commit also pulls the previous repr out into its own file), whereas the packing stuff is all in commit 2.
---
P.S. I haven't looked at all of this since writing it, and will do a pass over it again later, sorry for any obvious typos or w/e. I also definitely repeat myself in comments and such.
(It probably could use more tests too. I did some basic testing, and made it so we `debug_assert!` in cases the decode isn't what we encoded, but I don't know the degree which I can assume libstd's testing of IO would exercise this. That is: it wouldn't be surprising to me if libstds IO testing were minimal, especially around error cases, although I have no idea).
|
|
This should cover a mostly cross-platform subset of supported exit codes.
|
|
|
|
Also, rename `BorrowedHandle::borrow_raw_handle` and
`BorrowedSocket::borrow_raw_socket` to `BorrowedHandle::borrow_raw` and
`BorrowedSocket::borrow_raw`.
This is just a minor rename to reduce redundancy in the user code calling
these functions, and to eliminate an inessential difference between
`BorrowedFd` code and `BorrowedHandle`/`BorrowedSocket` code.
While here, add a simple test exercising `BorrowedFd::borrow_raw_fd`.
|
|
kmc-solid: Fix off-by-one error in `SystemTime::now`
Fixes a miscalculation of `SystemTime` on the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets.
Unlike the identically-named libc counterpart `tm::tm_mon`, `SOLID_RTC_TIME::tm_mon` contains a 1-based month number.
|
