| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
|
|
|
|
|
|
Fix `std::collections::HashSet::drain` documentation
Hi!
`std::collections::HashSet::drain` contains small typo in the docstring.
I didn't read too much about the model of contributing to Rust, so merge this PR or close and fix the typo the right way :)
Thanks for Rust!
|
|
Windows RNG: Use `BCRYPT_RNG_ALG_HANDLE` by default
This only changes a small amount of actual code, the rest is documentation outlining the history of this module as I feel it will be relevant to any future issues that might crop up.
The code change is to use the `BCRYPT_RNG_ALG_HANDLE` [pseudo-handle](https://docs.microsoft.com/en-us/windows/win32/seccng/cng-algorithm-pseudo-handles) by default, which simply uses the default RNG. Previously we used `BCRYPT_USE_SYSTEM_PREFERRED_RNG` which has to load the system configuration and then find and load that RNG. I suspect this was the cause of failures on some systems (e.g. due to corrupted config). However, this is admittedly speculation as I can't reproduce the issue myself (and it does seem quite rare even in the wild). Still, removing a possible point of failure is likely worthwhile in any case.
r? libs
|
|
|
|
Support `#[unix_sigpipe = "inherit|sig_dfl"]` on `fn main()` to prevent ignoring `SIGPIPE`
When enabled, programs don't have to explicitly handle `ErrorKind::BrokenPipe` any longer. Currently, the program
```rust
fn main() { loop { println!("hello world"); } }
```
will print an error if used with a short-lived pipe, e.g.
% ./main | head -n 1
hello world
thread 'main' panicked at 'failed printing to stdout: Broken pipe (os error 32)', library/std/src/io/stdio.rs:1016:9
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
by enabling `#[unix_sigpipe = "sig_dfl"]` like this
```rust
#![feature(unix_sigpipe)]
#[unix_sigpipe = "sig_dfl"]
fn main() { loop { println!("hello world"); } }
```
there is no error, because `SIGPIPE` will not be ignored and thus the program will be killed appropriately:
% ./main | head -n 1
hello world
The current libstd behaviour of ignoring `SIGPIPE` before `fn main()` can be explicitly requested by using `#[unix_sigpipe = "sig_ign"]`.
With `#[unix_sigpipe = "inherit"]`, no change at all is made to `SIGPIPE`, which typically means the behaviour will be the same as `#[unix_sigpipe = "sig_dfl"]`.
See https://github.com/rust-lang/rust/issues/62569 and referenced issues for discussions regarding the `SIGPIPE` problem itself
See the [this](https://rust-lang.zulipchat.com/#narrow/stream/219381-t-libs/topic/Proposal.3A.20First.20step.20towards.20solving.20the.20SIGPIPE.20problem) Zulip topic for more discussions, including about this PR.
Tracking issue: https://github.com/rust-lang/rust/issues/97889
|
|
Use `FILE_ATTRIBUTE_TAG_INFO` to get reparse tag
I've been looking at this code recently and it just occurred to me we don't actually use the full reparse data at this point, only the tag. [`GetFileInformationByHandleEx`](https://docs.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-getfileinformationbyhandleex) can do exactly that by filling a [`FILE_ATTRIBUTE_TAG_INFO`](https://docs.microsoft.com/en-us/windows/win32/api/winbase/ns-winbase-file_attribute_tag_info) struct.
r? ```````@thomcc``````` since you've made changes here recently (which is why I have this code on my mind atm)
|
|
|
|
Also briefly document the history of `sys/windows/rand.rs` as they may be relevant to any future changes.
|
|
Uplift the `let_underscore` lints from clippy into rustc.
This PR resolves #97241.
This PR adds three lints from clippy--`let_underscore_drop`, `let_underscore_lock`, and `let_underscore_must_use`, which are meant to capture likely-incorrect uses of `let _ = ...` bindings (in particular, doing this on a type with a non-trivial `Drop` causes the `Drop` to occur immediately, instead of at the end of the scope. For a type like `MutexGuard`, this effectively releases the lock immediately, which is almost certainly the wrong behavior)
In porting the lints from clippy I had to copy over a bunch of utility functions from `clippy_util` that these lints also relied upon. Is that the right approach?
Note that I've set the `must_use` and `drop` lints to Allow by default and set `lock` to Deny by default (this matches the same settings that clippy has). In talking with `@estebank` he informed me to do a Crater run (I am not sure what type of Crater run to request here--I think it's just "check only"?)
On the linked issue, there's some discussion about using `must_use` and `Drop` together as a heuristic for when to warn--I did not implement this yet.
r? `@estebank`
|
|
|
|
Fix a bunch of typo
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
|
|
|
|
This avoid unnecessarily getting the full reparse data when all we need is the tag.
|
|
|
|
|
|
|
|
|
|
This PR will fix some typos detected by [typos].
I only picked the ones I was sure were spelling errors to fix, mostly in
the comments.
[typos]: https://github.com/crate-ci/typos
|
|
Fix UB from misalignment and provenance widening in `std::sys::windows`
This fixes two types of UB:
1. Reading past the end of a reference in types like `&c::REPARSE_DATA_BUFFER` (see https://github.com/rust-lang/unsafe-code-guidelines/issues/256). This is fixed by using `addr_of!`. I think there are probably a couple more cases where we do this for other structures, and will look into it in a bit.
2. Failing to ensure that a `[u8; N]` on the stack is sufficiently aligned to convert to a `REPARSE_DATA_BUFFER`. ~~This was done by introducing a new `AlignedAs` struct that allows aligning one type to the alignment of another type. I expect there are other places where we have this issue too, or I wouldn't introduce this type, but will get to them after this lands.~~
~~Worth noting, it *is* implemented in a way that can cause problems depending on how we fix #81996, but this would be caught by the test I added (and presumably if we decide to fix that in a way that would break this code, we'd also introduce a `#[repr(simple)]` or `#[repr(linear)]` as a replacement for this usage of `#[repr(C)]`).~~
Edit: None of that is still in the code, I just went with a `Align8` since that's all we'll need for almost everything we want to call.
These are more or less "potential UB" since it's likely at the moment everything works fine, although the alignment not causing issues might just be down to luck (and x86 being forgiving).
~~NB: I've only ensured this check builds, but will run tests soon.~~ All tests pass, including stage2 compiler tests.
r? ``@ChrisDenton``
|
|
Use getentropy when possible on all Apple platforms
As the current code comments say, `SecRandomCopyBytes` is very heavyweight (regardless of purpose) compared to just asking the kernel directly for bytes from its own CSPRNG. We were not previously making an attempt to use the more efficient `getentropy` call on other Apple targets, instead solely using it on macOS. As the function is available on newer versions of Apple's different OSes, this changes the random filling to always attempt it first everywhere, only falling back to the less ideal alternatives after. This also cleans up the multiple Apple `imp` blocks into one.
It also should give a perf improvement, even if its likely unnoticeably small.
Refed XCode header for `getentropy` in the SDK:
```h
int getentropy(void* buffer, size_t size) __OSX_AVAILABLE(10.12) __IOS_AVAILABLE(10.0) __TVOS_AVAILABLE(10.0) __WATCHOS_AVAILABLE(3.0);
```
r? ``@thomcc``
|
|
Reinstate preloading of some dll imports
I've now come around to the conclusion that there is a justification for pre-loading the synchronization functions `WaitOnAddress` and `WakeByAddressSingle`. I've found this to have a particularly impact in testing frameworks that may have short lived processes which immediately spawn lots of threads.
Also, because pre-main initializers imply a single-threaded environment, we can switch back to using relaxed atomics which might be a minor perf improvement on some platforms (though I doubt it's particularly notable).
r? ``@Mark-Simulacrum`` and sorry for the churn here.
For convenience I'll summarise previous issues with preloading and the solutions that are included in this PR (if any):
**Issue:** User pre-main initializers may be run before std's
**Solution:** The std now uses initializers that are guaranteed to run earlier than the old initializers. A note is also added that users should not copy std's behaviour if they want to ensure they run their initializers after std.
**Issue:** Miri does not understand pre-main initializers.
**Solution:** For miri only, run the function loading lazily instead.
**Issue:** We should ideally use `LoadLibrary` to get "api-ms-win-core-synch-l1-2-0". Only "ntdll" and "kernel32" are guaranteed to always be loaded.
**Solution:** None. We can't use `LoadLibrary` pre-main. However, in the past `GetModuleHandle` has always worked in practice so this should hopefully not be a problem.
If/when Windows 7 support is dropped, we can finally remove all this for good and just use normal imports.
|
|
Avoid zeroing large stack buffers in stdio on Windows
Does what it says on the tin, using `[MaybeUninit<u16>; N]` instead of `[0u16; N]`. These buffers seem to be around 8kb, which is big enough that this is likely to be a very nice perf boost to stdio-heavy windows code.
r? ``@ChrisDenton``
*(Note: this PR also has a commit that adds windows to CI, but as it mentions I'll revert that after it comes out green -- I can only do a check build on the machine I'm typing this on)*
|
|
Add `AsFd` implementations for stdio types on WASI.
This mirrors the implementations on Unix platforms, and also mirrors the
existing `AsRawFd` impls.
|
|
|
|
|
|
|
|
|
|
|
|
Revert let_chains stabilization
This is the revert against master, the beta revert was already done in #100538.
Bumps the stage0 compiler which already has it reverted.
|
|
|
|
Rollup of 7 pull requests
Successful merges:
- #100898 (Do not report too many expr field candidates)
- #101056 (Add the syntax of references to their documentation summary.)
- #101106 (Rustdoc-Json: Retain Stripped Modules when they are imported, not when they have items)
- #101131 (CTFE: exposing pointers and calling extern fn is just impossible)
- #101141 (Simplify `get_trait_ref` fn used for `virtual_function_elimination`)
- #101146 (Various changes to logging of borrowck-related code)
- #101156 (Remove `Sync` requirement from lint pass objects)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Add the syntax of references to their documentation summary.
Without this change, in <https://doc.rust-lang.org/1.63.0/std/#primitives>, `reference` is the only entry in that list which does not contain the syntax by which the type is named in source code. With this change, it contains them, in roughly the same way as the `pointer` entry does.
|
|
This reverts commit 326646074940222d602f3683d0559088690830f4.
This is the revert against master, the beta revert was already done in #100538.
|
|
Add `#[unstable(feature = "os_fd", issue = "98699")]` to the new
`pub use` declarations.
|
|
|
|
`std::os::fd` defines types like `OwnedFd` and `RawFd` and is common
between Unix and non-Unix platforms that share a basic file-descriptor
concept. Rust currently uses this internally to simplify its own code,
but it would be useful for external users in the same way, so make it
public.
This means that `OwnedFd` etc. will all appear in three places, for
example on unix platforms:
- `std::os::fd::OwnedFd`
- `std::os::unix::io::OwnedFd`
- `std::os::unix::prelude::OwnedFd`
|
|
Make use of `[wrapping_]byte_{add,sub}`
These new methods trivially replace old `.cast().wrapping_offset().cast()` & similar code.
Note that [`arith_offset`](https://doc.rust-lang.org/std/intrinsics/fn.arith_offset.html) and `wrapping_offset` are the same thing.
r? ``@scottmcm``
_split off from #100746_
|
|
Stabilize `std::io::read_to_string`
Closes #80218. :tada:
This PR stabilizes the `std::io::read_to_string` function, with the following public API:
```rust
pub fn read_to_string<R: Read>(reader: R) -> Result<String>;
```
It's analogous to `std::fs::read_to_string` for files, but it works on anything that implements `io::Read`, including `io::stdin()`.
See the tracking issue (#80218) or documentation for details.
|
|
Add a `File::create_new` constructor
We have `File::create` for creating a file or opening an existing file,
but the secure way to guarantee creating a new file requires a longhand
invocation via `OpenOptions`.
Add `File::create_new` to handle this case, to make it easier for people
to do secure file creation.
|
|
Use posix_spawn for absolute paths on macOS
Currently, on macOS, Rust never uses the fast posix_spawn path if a
directory change is requested, due to a bug in Apple's libc. However, the
bug is only triggered if the program is a relative path.
This PR makes it so that the fast path continues to work if the program
is an absolute path or a lone filename.
This was an alternative proposed in https://github.com/rust-lang/rust/pull/80537#issue-776674009, and it makes a measurable performance difference in some of my code that spawns thousands of processes.
|
|
socket `set_mark` addition.
to be able to set a marker/id on the socket for network filtering
(iptables/ipfw here) purpose.
|
|
Support parsing IP addresses from a byte string
Fixes #94821
The goal is to be able to parse addresses from a byte string without requiring to do any utf8 validation. Since internally the parser already works on byte strings, this should be possible and I personally already needed this in the past too.
~~I used the proposed approach from the issue by implementing `TryFrom<&'a [u8]>` for all 6 address types (3 ip address types and 3 socket address types). I believe implementing stable traits for stable types is insta-stable so this will probably need an FCP?~~
Switched to an unstable inherent method approach called `parse_ascii` as requested.
cc ``````@jyn514``````
|
|
Currently, on macOS, Rust never uses the fast posix_spawn path if a
directory change is requested due to a bug in Apple's libc. However, the
bug is only triggered if the program is a relative path.
This PR makes it so that the fast path continues to work if the program
is an absolute path or a lone filename.
This was an alternative proposed in
https://github.com/rust-lang/rust/pull/80537#issue-776674009, and it
makes a measurable performance difference in some of my code that spawns
thousands of processes.
|
|
Add next_up and next_down for f32/f64 - take 2
This is a revival of https://github.com/rust-lang/rust/pull/88728 which staled due to inactivity of the original author. I've address the last review comment.
---
This is a pull request implementing the features described at https://github.com/rust-lang/rfcs/pull/3173.
`@rustbot` label +T-libs-api -T-libs
r? `@scottmcm`
cc `@orlp`
|
|
|
|
This makes it possible to instruct libstd to never touch the signal
handler for `SIGPIPE`, which makes programs pipeable by default (e.g.
with `./your-program | head -n 1`) without `ErrorKind::BrokenPipe`
errors.
|
