| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
Clarify that SyncOnceCell::set blocks.
Reading the discussion of this feature, I gained the mistaken impression that neither `set` nor `get` blocked, and thus calling `get` immediately after `set` was not guaranteed to succeed. It turns out that `set` *does* block, guaranteeing that the cell contains a value once `set` returns. This change updates the documentation to state that explicitly.
Happy to adjust the wording as desired.
|
|
Add some diagnostic items for Clippy
|
|
|
|
Reading the discussion of this feature, I gained the mistaken impression that neither `set` nor `get` blocked, and thus calling `get` immediately after `set` was not guaranteed to succeed. It turns out that `set` *does* block, guaranteeing that the cell contains a value once `set` returns. This change updates the documentation to state that explicitly.
|
|
Change the arguments of `send_vectored_with_ancillary` and
`send_vectored_with_ancillary_to` to take an non-mutable bufs.
|
|
Remove the x86_64-rumprun-netbsd target
Herein we remove the target from the compiler and the code from libstd intended to support the now-defunct rumprun project.
Closes #81514
|
|
clarify RW lock's priority gotcha
In particular, the following program works on Linux, but deadlocks on
mac:
```rust
use std::{
sync::{Arc, RwLock},
thread,
time::Duration,
};
fn main() {
let lock = Arc::new(RwLock::new(()));
let r1 = thread::spawn({
let lock = Arc::clone(&lock);
move || {
let _rg = lock.read();
eprintln!("r1/1");
sleep(1000);
let _rg = lock.read();
eprintln!("r1/2");
sleep(5000);
}
});
sleep(100);
let w = thread::spawn({
let lock = Arc::clone(&lock);
move || {
let _wg = lock.write();
eprintln!("w");
}
});
sleep(100);
let r2 = thread::spawn({
let lock = Arc::clone(&lock);
move || {
let _rg = lock.read();
eprintln!("r2");
sleep(2000);
}
});
r1.join().unwrap();
r2.join().unwrap();
w.join().unwrap();
}
fn sleep(ms: u64) {
std::thread::sleep(Duration::from_millis(ms))
}
```
Context: I was completely mystified by a my CI deadlocking on mac ([here](https://github.com/matklad/xshell/pull/7)), until ``@azdavis`` debugged the issue. See a stand-alone reproduciton here: https://github.com/matklad/xshell/pull/15
|
|
doc: cube root, not cubic root
Like we say square root, not quadratic root.
|
|
Add missing "see its documentation for more" stdio
StdoutLock and StderrLock does not have example, it would be better
to leave "see its documentation for more" like iter docs.
|
|
Co-authored-by: Steven Fackler <sfackler@gmail.com>
|
|
In particular, the following program works on Linux, but deadlocks on
mac:
use std::{
sync::{Arc, RwLock},
thread,
time::Duration,
};
fn main() {
let lock = Arc::new(RwLock::new(()));
let r1 = thread::spawn({
let lock = Arc::clone(&lock);
move || {
let _rg = lock.read();
eprintln!("r1/1");
sleep(1000);
let _rg = lock.read();
eprintln!("r1/2");
sleep(5000);
}
});
sleep(100);
let w = thread::spawn({
let lock = Arc::clone(&lock);
move || {
let _wg = lock.write();
eprintln!("w");
}
});
sleep(100);
let r2 = thread::spawn({
let lock = Arc::clone(&lock);
move || {
let _rg = lock.read();
eprintln!("r2");
sleep(2000);
}
});
r1.join().unwrap();
r2.join().unwrap();
w.join().unwrap();
}
fn sleep(ms: u64) {
std::thread::sleep(Duration::from_millis(ms))
}
|
|
Closes #81514
|
|
Use libc::accept4 on Android instead of raw syscall.
This PR replaces the use of a raw `accept4` syscall with `libc::accept4`. This was originally added (by me) because `std` couldn't update to the latest `libc` with `accept4` support for android. By now, libc is already on 0.2.85, so the workaround can be removed.
`@rustbot` label +O-android +T-libs-impl
|
|
Add a `size()` function to WASI's `MetadataExt`.
WASI's `filestat` type includes a size field, so expose it in
`MetadataExt` via a `size()` function, similar to the corresponding Unix
function.
r? ``````@alexcrichton``````
|
|
Enable API documentation for `std::os::wasi`.
This adds API documentation support for `std::os::wasi` modeled after
how `std::os::unix` works, so that WASI can be documented [here] along
with the other platforms.
[here]: https://doc.rust-lang.org/stable/std/os/index.html
Two changes of particular interest:
- This changes the `AsRawFd` for `io::Stdin` for WASI to return
`libc::STDIN_FILENO` instead of `sys::stdio::Stdin.as_raw_fd()` (and
similar for `Stdout` and `Stderr`), which matches how the `unix`
version works. `STDIN_FILENO` etc. may not always be explicitly
reserved at the WASI level, but as long as we have Rust's `std` and
`libc`, I think it's reasonable to guarantee that we'll always use
`libc::STDIN_FILENO` for stdin.
- This duplicates the `osstr2str` utility function, rather than
trying to share it across all the configurations that need it.
r? ```@alexcrichton```
|
|
Like we say square root, not quadratic root.
|
|
Stabilize str_split_once
Closes #74773
|
|
|
|
library: Normalize safety-for-unsafe-block comments
Almost all safety comments are of the form `// SAFETY:`,
so normalize the rest and fix a few of them that should
have been a `/// # Safety` section instead.
Furthermore, make `tidy` only allow the uppercase form. While
currently `tidy` only checks `core`, it is a good idea to prevent
`core` from drifting to non-uppercase comments, so that later
we can start checking `alloc` etc. too.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Update outdated comment in unix Command.
The big comment in the `Command` struct has been incorrect for some time (at least since #46789 which removed `envp`). Rather than try to remove the allocations, this PR just updates the comment to reflect reality. There is an explanation for the reasoning at https://github.com/rust-lang/rust/pull/31409#issuecomment-182122895, discussing the potential of being able to call `Command::exec` after `libc::fork`. That can still be done in the future, but I think for now it would be good to just correct the comment.
|
|
Add an impl of Error on `Arc<impl Error>`.
`Display` already exists so this should be a non-controversial change (famous last words).
Would have to be insta-stable.
|
|
Co-authored-by: Joshua Nelson <joshua@yottadb.com>
|
|
rust_2015 and rust_2018 are just re-exports of v1.
rust_2021 is a module that for now just re-exports everything from v1,
such that we can add more things later.
|
|
|
|
|
|
|
|
|
|
This ensures that these names resolve to the right place even when
building the WASI support on other platforms for generating the
documentation.
|
|
WASI's `RawFd` is a `u32`, while `libc` uses `c_int`.
|
|
The following methods are made unstable const under the `const_socketaddr` feature:
`SocketAddr`
- `ip`
- `port`
- `is_ipv4`
- `is_ipv6`
`SocketAddrV4`
- `ip`
- `port`
`SocketAddrV6`
- `ip`
- `port`
- `flowinfo`
- `scope_id`
|
|
|
|
Almost all safety comments are of the form `// SAFETY:`,
so normalize the rest and fix a few of them that should
have been a `/// # Safety` section instead.
Furthermore, make `tidy` only allow the uppercase form. While
currently `tidy` only checks `core`, it is a good idea to prevent
`core` from drifting to non-uppercase comments, so that later
we can start checking `alloc` etc. too.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
|
|
|
|
This adds API documentation support for `std::os::wasi` modeled after
how `std::os::unix` works, so that WASI can be documented [here] along
with the other platforms.
[here]: https://doc.rust-lang.org/stable/std/os/index.html
Two changes of particular interest:
- This changes the `AsRawFd` for `io::Stdin` for WASI to return
`libc::STDIN_FILENO` instead of `sys::stdio::Stdin.as_raw_fd()` (and
similar for `Stdout` and `Stderr`), which matches how the `unix`
version works. `STDIN_FILENO` etc. may not always be explicitly
reserved at the WASI level, but as long as we have Rust's `std` and
`libc`, I think it's reasonable to guarantee that we'll always use
`libc::STDIN_FILENO` for stdin.
- This duplicates the `osstr2str` utility function, rather than
trying to share it across all the configurations that need it.
|
|
Update the bootstrap compiler
This updates the bootstrap compiler, notably leaving out a change to enable semicolon in macro expressions lint, because stdarch still depends on the old behavior.
|
|
- Link from `core::hash` to `HashMap` and `HashSet`
- Link from HashMap and HashSet to the module-level documentation on
when to use the collection
- Link from several collections to Wikipedia articles on the general
concept
|
|
add diagnostic items for OsString/PathBuf/Owned as well as to_vec on slice
This is adding diagnostic items to be used by rust-lang/rust-clippy#6730, but my understanding is the clippy-side change does need to be done over there since I am adding a new clippy feature.
Add diagnostic items to the following types:
OsString (os_string_type)
PathBuf (path_buf_type)
Owned (to_owned_trait)
As well as the to_vec method on slice/[T]
|
|
Make WASI's `hard_link` behavior match other platforms.
Following #78026, `std::fs::hard_link` on most platforms does not follow
symlinks. Change the WASI implementation to also not follow symlinks.
r? ```@alexcrichton```
|
|
The use of `ExitStatus` as the Rust type name for a Unix *wait
status*, not an *exit status*, is very confusing, but sadly probably
too late to change.
This area is confusing enough in Unix already (and many programmers
are already confuxed). We can at least document it.
I chose *not* to mention the way shells like to exit with signal
numbers, thus turning signal numbers into exit statuses. This is only
relevant for Rust programs using `std::process` if they run shells.
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
|
|
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
|
|
WASI's `filestat` type includes a size field, so expose it in
`MetadataExt` via a `size()` function, similar to the corresponding Unix
function.
|
|
|
|
|
|
|
|
Currently, on Nightly, this panics:
```
use std::process::ExitStatus;
use std::os::unix::process::ExitStatusExt;
fn main() {
let st = ExitStatus::from_raw(0x007f);
println!("st = {}", st);
}
```
This is because the impl of Display assumes that if .code() is None,
.signal() must be Some. That was a false assumption, although it was
true with buggy code before
5b1316f78152a9c066b357ea9addf803d48e114a
unix ExitStatus: Do not treat WIFSTOPPED as WIFSIGNALED
This is not likely to have affected many people in practice, because
`Command` will never produce such a wait status (`ExitStatus`).
Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
|
|
|
|
StdoutLock and StderrLock does not have example, it would be better
to leave "see its documentation for more" like iter docs.
|
|
Provide NonZero_c_* integers
I'm pretty sure I am going want this for #73125 and it seems like an
omission that would be in any case good to remedy.
<strike>Because the raw C types are in `std`, not `core`, to achieve this we
must export the relevant macros from `core` so that `std` can use
them. That's done with a new `num_internals` perma-unstable feature.
The macros need to take more parameters for the module to get the
types from and feature attributes to use.
I have eyeballed the docs output for core, to check that my changes to
these macros have made no difference to the core docs output.</strike>
|
