| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Previously `level` was named `opt` and `option_name` was named `val`,
then extra names of `payload` or `slot` were used for the option value.
This change aligns the wrapper parameters with their names in POSIX.
Winsock uses similar but more abbreviated names: `level`, `optname`,
`optval`, `optlen`.
|
|
|
|
Fix miniz_oxide types showing up in std docs
Fixes #90526.
Thanks to ```````@camelid,``````` I rediscovered `doc(masked)`, allowing us to prevent `miniz_oxide` type to show up in std docs.
r? ```````@notriddle```````
|
|
removing architecture requirements for RustyHermit
RustHermit and HermitCore is able to run on aarch64 and x86_64. In the future these operating systems will also support RISC-V. Consequently, the dependency to a specific target should be removed.
The build process of `hermit-abi` fails if the architecture isn't supported.
|
|
Stabilize pin_static_ref.
FCP finished here: https://github.com/rust-lang/rust/issues/78186#issuecomment-1024987221
Closes #78186
|
|
|
|
Rollup of 7 pull requests
Successful merges:
- #92902 (Improve the documentation of drain members)
- #93658 (Stabilize `#[cfg(panic = "...")]`)
- #93954 (rustdoc-json: buffer output)
- #93979 (Add debug assertions to validate NUL terminator in c strings)
- #93990 (pre #89862 cleanup)
- #94006 (Use a `Field` in `ConstraintCategory::ClosureUpvar`)
- #94086 (Fix ScalarInt to char conversion)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Add debug assertions to validate NUL terminator in c strings
The `unchecked` variants from the stdlib usually perform the check anyway if debug assertions are on (for example, `unwrap_unchecked`). This PR does the same thing for `CStr` and `CString`, validating the correctness for the NUL byte in debug mode.
|
|
Improve the documentation of drain members
hopefully fixes #92765
|
|
Destabilise entry_insert
See: https://github.com/rust-lang/rust/pull/90345
I didn't revert the rename that was done in that PR, I left it as `entry_insert`.
Additionally, before that PR, `VacantEntry::insert_entry` seemingly had no stability attribute on it? I kept the attribute, just made it an unstable one, same as the one on `Entry`.
There didn't seem to be any mention of this in the RELEASES.md, so I don't think there's anything for me to do other than this?
|
|
|
|
kmc-solid: Use the filesystem thread-safety wrapper
Fixes the thread unsafety of the `std::fs` implementation used by the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets.
Neither the SOLID filesystem API nor built-in filesystem drivers guarantee thread safety by default. Although this may suffice in general embedded-system use cases, and in fact the API can be used from multiple threads without any problems in many cases, this has been a source of unsoundness in `std::sys::solid::fs`.
This commit updates the implementation to leverage the filesystem thread-safety wrapper (which uses a pluggable synchronization mechanism) to enforce thread safety. This is done by prefixing all paths passed to the filesystem API with `\TS`. (Note that relative paths aren't supported in this platform.)
|
|
|
|
Move `{core,std}::stream::Stream` to `{core,std}::async_iter::AsyncIterator`
Following amendments in https://github.com/rust-lang/rfcs/pull/3208/.
cc #79024
cc ``@yoshuawuyts`` ``@joshtriplett``
|
|
|
|
Add MAIN_SEPARATOR_STR
Currently, if someone needs access to the path separator as a str, they need to go through this mess:
```rust
unsafe {
std::str::from_utf8_unchecked(slice::from_ref(&(MAIN_SEPARATOR as u8)))
}
```
This PR just re-exports an existing path separator str API.
|
|
|
|
|
|
Add documentation to more `From::from` implementations.
For users looking at documentation through IDE popups, this gives them relevant information rather than the generic trait documentation wording “Performs the conversion”. For users reading the documentation for a specific type for any reason, this informs them when the conversion may allocate or copy significant memory versus when it is always a move or cheap copy.
Notes on specific cases:
* The new documentation for `From<T> for T` explains that it is not a conversion at all.
* Also documented `impl<T, U> Into<U> for T where U: From<T>`, the other central blanket implementation of conversion.
* The new documentation for construction of maps and sets from arrays of keys mentions the handling of duplicates. Future work could be to do this for *all* code paths that convert an iterable to a map or set.
* I did not add documentation to conversions of a specific error type to a more general error type.
* I did not add documentation to unstable code.
This change was prepared by searching for the text "From<... for" and so may have missed some cases that for whatever reason did not match. I also looked for `Into` impls but did not find any worth documenting by the above criteria.
|
|
Signed-off-by: Alex Saveau <saveau.alexandre@gmail.com>
|
|
Signed-off-by: Alex Saveau <saveau.alexandre@gmail.com>
|
|
|
|
RustHermit and HermitCore is able to run on aarch64 and x86_64.
In the future these operating systems will also support RISC-V.
Consequently, the dependency to a specific target should be removed.
Building hermit-abi fails if the architecture isn't supported.
|
|
|
|
This also deletes the unstable API surface area previously added to expose this
functionality on new methods rather than built into the current set.
|
|
`std::path::absolute`
Implements #59117 by adding a `std::path::absolute` function that creates an absolute path without reading the filesystem. This is intended to be a drop-in replacement for [`std::fs::canonicalize`](https://doc.rust-lang.org/std/fs/fn.canonicalize.html) in cases where it isn't necessary to resolve symlinks. It can be used on paths that don't exist or where resolving symlinks is unwanted. It can also be used to avoid circumstances where `canonicalize` might otherwise fail.
On Windows this is a wrapper around [`GetFullPathNameW`](https://docs.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-getfullpathnamew). On Unix it partially implements the POSIX [pathname resolution](https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_13) specification, stopping just short of actually resolving symlinks.
|
|
make `Instant::{duration_since, elapsed, sub}` saturating and remove workarounds
This removes all mutex/atomic-based workarounds for non-monotonic clocks and makes the previously panicking methods saturating instead. Additionally `saturating_duration_since` becomes deprecated since `duration_since` now fills that role.
Effectively this moves the fixup from `Instant` construction to the comparisons.
This has some observable effects, especially on platforms without monotonic clocks:
* Incorrectly ordered Instant comparisons no longer panic in release mode. This could hide some programming errors, but since debug mode still panics tests can still catch them.
* `checked_duration_since` will now return `None` in more cases. Previously it only happened when one compared instants obtained in the wrong order or manually created ones. Now it also does on backslides.
* non-monotonic intervals will not be transitive, i.e. `b.duration_since(a) + c.duration_since(b) != c.duration_since(a)`
The upsides are reduced complexity and lower overhead of `Instant::now`.
## Motivation
Currently we must choose between two poisons. One is high worst-case latency and jitter of `Instant::now()` due to explicit synchronization; see #83093 for benchmarks, the worst-case overhead is > 100x. The other is sporadic panics on specific, rare combinations of CPU/hypervisor/operating system due to platform bugs.
Use-cases where low-overhead, fine-grained timestamps are needed - such as syscall tracing, performance profiles or sensor data acquisition (drone flight controllers were mentioned in a libs meeting) in multi-threaded programs - are negatively impacted by the synchronization.
The panics are user-visible (program crashes), hard to reproduce and can be triggered by any dependency that might be using Instants for any reason.
A solution that is fast _and_ doesn't panic is desirable.
----
closes #84448
closes #86470
|
|
Bump compiler-builtins to 0.1.69
This includes https://github.com/rust-lang/compiler-builtins/pull/452 which should fix some issues with duplicate symbol defintions of some intrinsics.
|
|
Co-authored-by: Mark Rousskov <mark.simulacrum@gmail.com>
|
|
|
|
|
|
This removes all mutex/atomics based workarounds for non-monotonic clocks and makes the previously panicking methods saturating instead.
Effectively this moves the monotonization from `Instant` construction to the comparisons.
This has some observable effects, especially on platforms without monotonic clocks:
* Incorrectly ordered Instant comparisons no longer panic. This may hide some programming errors until someone actually looks at the resulting `Duration`
* `checked_duration_since` will now return `None` in more cases. Previously it only happened when one compared instants obtained in the wrong order or
manually created ones. Now it also does on backslides.
The upside is reduced complexity and lower overhead of `Instant::now`.
|
|
Fix hashing for windows paths containing a CurDir component
* the logic only checked for / but not for \
* verbatim paths shouldn't skip items at all since they don't get normalized
* the extra branches get optimized out on unix since is_sep_byte is a trivial comparison and is_verbatim is always-false
* tests lacked windows coverage for these cases
That lead to equal paths not having equal hashes and to unnecessary collisions.
|
|
Rollup of 10 pull requests
Successful merges:
- #90955 (Rename `FilenameTooLong` to `InvalidFilename` and also use it for Windows' `ERROR_INVALID_NAME`)
- #91607 (Make `span_extend_to_prev_str()` more robust)
- #92895 (Remove some unused functionality)
- #93635 (Add missing platform-specific information on current_dir and set_current_dir)
- #93660 (rustdoc-json: Add some tests for typealias item)
- #93782 (Split `pauth` target feature)
- #93868 (Fix incorrect register conflict detection in asm!)
- #93888 (Implement `AsFd` for `&T` and `&mut T`.)
- #93909 (Fix typo: explicitely -> explicitly)
- #93910 (fix mention of moved function in `rustc_hir` docs)
Failed merges:
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
r=joshtriplett
Implement `AsFd` for `&T` and `&mut T`.
Add implementations of `AsFd` for `&T` and `&mut T`, so that users can
write code like this:
```rust
pub fn fchown<F: AsFd>(fd: F, uid: Option<u32>, gid: Option<u32>) -> io::Result<()> {
```
with `fd: F` rather than `fd: &F`.
And similar for `AsHandle` and `AsSocket` on Windows.
Also, adjust the `fchown` example to pass the file by reference. The
code can work either way now, but passing by reference is more likely
to be what users will want to do.
This is an alternative to #93869, and is a simpler way to achieve the
same goals: users don't need to pass borrowed-`BorrowedFd` arguments,
and it prevents a pitfall in the case where users write `fd: F` instead
of `fd: &F`.
r? ```@joshtriplett```
|
|
Add missing platform-specific information on current_dir and set_current_dir
Fixes #93598.
|
|
Rename `FilenameTooLong` to `InvalidFilename` and also use it for Windows' `ERROR_INVALID_NAME`
Address https://github.com/rust-lang/rust/issues/90940#issuecomment-970157931
`ERROR_INVALID_NAME` (i.e. "The filename, directory name, or volume label syntax is incorrect") happens if we pass an invalid filename, directory name, or label syntax, so mapping as `InvalidInput` is reasonable to me.
|
|
Stabilise `is_aarch64_feature_detected!` under `simd_aarch64` feature
Initial implementation, looking for feedback on the approach here. https://github.com/rust-lang/rust/issues/86941
One point I noticed was that I haven't seen different "since" versions for the same feature - does this mean that other features can't be added to to the `simd_aarch64` feature once this is in stable? If so it might need a more specific name.
r? `@Amanieu`
|
|
|
|
Add implementations of `AsFd` for `&T` and `&mut T`, so that users can
write code like this:
```rust
pub fn fchown<F: AsFd>(fd: F, uid: Option<u32>, gid: Option<u32>) -> io::Result<()> {
```
with `fd: F` rather than `fd: &F`.
And similar for `AsHandle` and `AsSocket` on Windows.
Also, adjust the `fchown` example to pass the file by reference. The
code can work either way now, but passing by reference is more likely
to be what users will want to do.
This is an alternative to #93869, and is a simpler way to achieve the
same goals: users don't need to pass borrowed-`BorrowedFd` arguments,
and it prevents a pitfall in the case where users write `fd: F` instead
of `fd: &F`.
|
|
|
|
|
|
Co-authored-by: Mara Bos <m-ou.se@m-ou.se>
|
|
|
|
|
|
|
|
kmc-solid: Fix wait queue manipulation errors in the `Condvar` implementation
This PR fixes a number of bugs in the `Condvar` wait queue implementation used by the [`*-kmc-solid_*`](https://doc.rust-lang.org/nightly/rustc/platform-support/kmc-solid.html) Tier 3 targets. These bugs can occur when there are multiple threads waiting on the same `Condvar` and sometimes manifest as an `unwrap` failure.
|
|
Neither the SOLID filesystem API nor built-in filesystems guarantee
thread safety by default. Although this may suffice in general embedded-
system use cases, and in fact the API can be used from multiple threads
without any problems in many cases, this has been a source of
unsoundness in `std::sys::solid::fs`.
This commit updates the `std` code to leverage the filesystem thread-
safety wrapper to enforce thread safety. This is done by prefixing all
paths passed to the filesystem API with `\TS`. (Note that relative paths
aren't supported in this platform.)
|
|
priorities
In ITRON, lower priority values mean higher priorities.
|
|
|
