| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Currently CI builds can fail spuriously during the LLVM build (#39003). I
believe this is due to sccache, and I believe that in turn was due to the fact
that the sccache server used to just be a raw mio server. Historically raw mio
servers are quite complicated to get right, but this is why we built Tokio! The
sccache server has been migrated to Tokio which I suspect would fix any latent
issues.
I have no confirmation of this (never been able to reproduce the deadlock
locally), but my hunch is that updating sccache to the master branch will fix
the timeouts during the LLVM build.
The binaries previously came from Gecko's infrastructure, but I've built new
ones by hand for Win/Mac/Linux and uploaded them to our CI bucket.
|
|
This doesn't belong in rustbuild itself, and now that we have only rustbuild we
can move this out of the build system.
|
|
The mitigations for #34978 involve passing `-Wa,-mrelax-relocations=no` to all C
code we compile, and we just forgot to pass it when compiling musl itself.
Closes #39979
|
|
travis: Disable source tarballs on most builders
Currently we create a source tarball on almost all of the `DEPLOY=1` builders
but this has the adverse side effect of all source tarballs overriding
themselves in the S3 bucket. Normally this is ok but unfortunately a source
tarball created on Windows is not buildable on Unix.
On Windows the vendored sources contain paths with `\` characters in them which
when interpreted on Unix end up in "file not found" errors.
Instead of this overwriting behavior, whitelist just one linux builder for
producing tarballs and avoid producing tarballs on all other hosts.
|
|
Currently we create a source tarball on almost all of the `DEPLOY=1` builders
but this has the adverse side effect of all source tarballs overriding
themselves in the S3 bucket. Normally this is ok but unfortunately a source
tarball created on Windows is not buildable on Unix.
On Windows the vendored sources contain paths with `\` characters in them which
when interpreted on Unix end up in "file not found" errors.
Instead of this overwriting behavior, whitelist just one linux builder for
producing tarballs and avoid producing tarballs on all other hosts.
|
|
travis: Add builders without assertions
This commit adds three new builders, one OSX, one Linux, and one MSVC, which
will produce "nightlies" with LLVM assertions disabled. Currently all nightly
releases have LLVM assertions enabled to catch bugs before they reach the
beta/stable channels. The beta/stable channels, however, do not have LLVM
assertions enabled.
Unfortunately though projects like Servo are stuck on nightlies for the near
future at least and are also suffering very long compile times. The purpose of
this commit is to provide artifacts to these projects which are not distributed
through normal channels (e.g. rustup) but are provided for developers to use
locally if need be.
Logistically these builds will all be uploaded to `rustc-builds-alt` instead of
the `rustc-builds` folder of the `rust-lang-ci` bucket. These builds will stay
there forever (until cleaned out if necessary) and there are no plans to
integrate this with rustup and/or the official release process.
|
|
|
|
This commit adds three new builders, one OSX, one Linux, and one MSVC, which
will produce "nightlies" with LLVM assertions disabled. Currently all nightly
releases have LLVM assertions enabled to catch bugs before they reach the
beta/stable channels. The beta/stable channels, however, do not have LLVM
assertions enabled.
Unfortunately though projects like Servo are stuck on nightlies for the near
future at least and are also suffering very long compile times. The purpose of
this commit is to provide artifacts to these projects which are not distributed
through normal channels (e.g. rustup) but are provided for developers to use
locally if need be.
Logistically these builds will all be uploaded to `rustc-builds-alt` instead of
the `rustc-builds` folder of the `rust-lang-ci` bucket. These builds will stay
there forever (until cleaned out if necessary) and there are no plans to
integrate this with rustup and/or the official release process.
|
|
build std for sparc64-unknown-linux-gnu
r? @alexcrichton
panicking / unwinding is broken (#39646) but with std available at least people
will be able to debug that issue on real hardware
|
|
travis: Fix build order of dist-x86-linux
I just tried to build this container locally but it looks like connecting to
ftp.gnu.org requires SNI, so let's build curl/OpenSSL first to ensure that we've
got an SNI-capable client to download gcc/binutils with.
|
|
LeakSanitizer, ThreadSanitizer, AddressSanitizer and MemorySanitizer support
```
$ cargo new --bin leak && cd $_
$ edit Cargo.toml && tail -n3 $_
```
``` toml
[profile.dev]
opt-level = 1
```
```
$ edit src/main.rs && cat $_
```
``` rust
use std::mem;
fn main() {
let xs = vec![0, 1, 2, 3];
mem::forget(xs);
}
```
```
$ RUSTFLAGS="-Z sanitizer=leak" cargo run --target x86_64-unknown-linux-gnu; echo $?
Finished dev [optimized + debuginfo] target(s) in 0.0 secs
Running `target/debug/leak`
=================================================================
==10848==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x557c3488db1f in __interceptor_malloc /shared/rust/checkouts/lsan/src/compiler-rt/lib/lsan/lsan_interceptors.cc:55
#1 0x557c34888aaa in alloc::heap::exchange_malloc::h68f3f8b376a0da42 /shared/rust/checkouts/lsan/src/liballoc/heap.rs:138
#2 0x557c34888afc in leak::main::hc56ab767de6d653a $PWD/src/main.rs:4
#3 0x557c348c0806 in __rust_maybe_catch_panic ($PWD/target/debug/leak+0x3d806)
SUMMARY: LeakSanitizer: 16 byte(s) leaked in 1 allocation(s).
23
```
```
$ cargo new --bin racy && cd $_
$ edit src/main.rs && cat $_
```
``` rust
use std::thread;
static mut ANSWER: i32 = 0;
fn main() {
let t1 = thread::spawn(|| unsafe { ANSWER = 42 });
unsafe {
ANSWER = 24;
}
t1.join().ok();
}
```
```
$ RUSTFLAGS="-Z sanitizer=thread" cargo run --target x86_64-unknown-linux-gnu; echo $?
==================
WARNING: ThreadSanitizer: data race (pid=12019)
Write of size 4 at 0x562105989bb4 by thread T1:
#0 racy::main::_$u7b$$u7b$closure$u7d$$u7d$::hbe13ea9e8ac73f7e $PWD/src/main.rs:6 (racy+0x000000010e3f)
#1 _$LT$std..panic..AssertUnwindSafe$LT$F$GT$$u20$as$u20$core..ops..FnOnce$LT$$LP$$RP$$GT$$GT$::call_once::h2e466a92accacc78 /shared/rust/checkouts/lsan/src/libstd/panic.rs:296 (racy+0x000000010cc5)
#2 std::panicking::try::do_call::h7f4d2b38069e4042 /shared/rust/checkouts/lsan/src/libstd/panicking.rs:460 (racy+0x00000000c8f2)
#3 __rust_maybe_catch_panic <null> (racy+0x0000000b4e56)
#4 std::panic::catch_unwind::h31ca45621ad66d5a /shared/rust/checkouts/lsan/src/libstd/panic.rs:361 (racy+0x00000000b517)
#5 std::thread::Builder::spawn::_$u7b$$u7b$closure$u7d$$u7d$::hccfc37175dea0b01 /shared/rust/checkouts/lsan/src/libstd/thread/mod.rs:357 (racy+0x00000000c226)
#6 _$LT$F$u20$as$u20$alloc..boxed..FnBox$LT$A$GT$$GT$::call_box::hd880bbf91561e033 /shared/rust/checkouts/lsan/src/liballoc/boxed.rs:605 (racy+0x00000000f27e)
#7 std::sys::imp::thread::Thread::new::thread_start::hebdfc4b3d17afc85 <null> (racy+0x0000000abd40)
Previous write of size 4 at 0x562105989bb4 by main thread:
#0 racy::main::h23e6e5ca46d085c3 $PWD/src/main.rs:8 (racy+0x000000010d7c)
#1 __rust_maybe_catch_panic <null> (racy+0x0000000b4e56)
#2 __libc_start_main <null> (libc.so.6+0x000000020290)
Location is global 'racy::ANSWER::h543d2b139f819b19' of size 4 at 0x562105989bb4 (racy+0x0000002f8bb4)
Thread T1 (tid=12028, running) created by main thread at:
#0 pthread_create /shared/rust/checkouts/lsan/src/compiler-rt/lib/tsan/rtl/tsan_interceptors.cc:902 (racy+0x00000001aedb)
#1 std::sys::imp::thread::Thread::new::hce44187bf4a36222 <null> (racy+0x0000000ab9ae)
#2 std::thread::spawn::he382608373eb667e /shared/rust/checkouts/lsan/src/libstd/thread/mod.rs:412 (racy+0x00000000b5aa)
#3 racy::main::h23e6e5ca46d085c3 $PWD/src/main.rs:6 (racy+0x000000010d5c)
#4 __rust_maybe_catch_panic <null> (racy+0x0000000b4e56)
#5 __libc_start_main <null> (libc.so.6+0x000000020290)
SUMMARY: ThreadSanitizer: data race $PWD/src/main.rs:6 in racy::main::_$u7b$$u7b$closure$u7d$$u7d$::hbe13ea9e8ac73f7e
==================
ThreadSanitizer: reported 1 warnings
66
```
```
$ cargo new --bin oob && cd $_
$ edit src/main.rs && cat $_
```
``` rust
fn main() {
let xs = [0, 1, 2, 3];
let y = unsafe { *xs.as_ptr().offset(4) };
}
```
```
$ RUSTFLAGS="-Z sanitizer=address" cargo run --target x86_64-unknown-linux-gnu; echo $?
=================================================================
==13328==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff29f3ecd0 at pc 0x55802dc6bf7e bp 0x7fff29f3ec90 sp 0x7fff29f3ec88
READ of size 4 at 0x7fff29f3ecd0 thread T0
#0 0x55802dc6bf7d in oob::main::h0adc7b67e5feb2e7 $PWD/src/main.rs:3
#1 0x55802dd60426 in __rust_maybe_catch_panic ($PWD/target/debug/oob+0xfe426)
#2 0x55802dd58dd9 in std::rt::lang_start::hb2951fc8a59d62a7 ($PWD/target/debug/oob+0xf6dd9)
#3 0x55802dc6c002 in main ($PWD/target/debug/oob+0xa002)
#4 0x7fad8c3b3290 in __libc_start_main (/usr/lib/libc.so.6+0x20290)
#5 0x55802dc6b719 in _start ($PWD/target/debug/oob+0x9719)
Address 0x7fff29f3ecd0 is located in stack of thread T0 at offset 48 in frame
#0 0x55802dc6bd5f in oob::main::h0adc7b67e5feb2e7 $PWD/src/main.rs:1
This frame has 1 object(s):
[32, 48) 'xs' <== Memory access at offset 48 overflows this variable
HINT: this may be a false positive if your program uses some custom stack unwind mechanism or swapcontext
(longjmp and C++ exceptions *are* supported)
SUMMARY: AddressSanitizer: stack-buffer-overflow $PWD/src/main.rs:3 in oob::main::h0adc7b67e5feb2e7
Shadow bytes around the buggy address:
0x1000653dfd40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfd50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfd60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfd70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x1000653dfd90: 00 00 00 00 f1 f1 f1 f1 00 00[f3]f3 00 00 00 00
0x1000653dfda0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfdb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfdc0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfdd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x1000653dfde0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
Addressable: 00
Partially addressable: 01 02 03 04 05 06 07
Heap left redzone: fa
Heap right redzone: fb
Freed heap region: fd
Stack left redzone: f1
Stack mid redzone: f2
Stack right redzone: f3
Stack partial redzone: f4
Stack after return: f5
Stack use after scope: f8
Global redzone: f9
Global init order: f6
Poisoned by user: f7
Container overflow: fc
Array cookie: ac
Intra object redzone: bb
ASan internal: fe
Left alloca redzone: ca
Right alloca redzone: cb
==13328==ABORTING
1
```
```
$ cargo new --bin uninit && cd $_
$ edit src/main.rs && cat $_
```
``` rust
use std::mem;
fn main() {
let xs: [u8; 4] = unsafe { mem::uninitialized() };
let y = xs[0] + xs[1];
}
```
```
$ RUSTFLAGS="-Z sanitizer=memory" cargo run; echo $?
==30198==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x563f4b6867da in uninit::main::hc2731cd4f2ed48f8 $PWD/src/main.rs:5
#1 0x563f4b7033b6 in __rust_maybe_catch_panic ($PWD/target/debug/uninit+0x873b6)
#2 0x563f4b6fbd69 in std::rt::lang_start::hb2951fc8a59d62a7 ($PWD/target/debug/uninit+0x7fd69)
#3 0x563f4b6868a9 in main ($PWD/target/debug/uninit+0xa8a9)
#4 0x7fe844354290 in __libc_start_main (/usr/lib/libc.so.6+0x20290)
#5 0x563f4b6864f9 in _start ($PWD/target/debug/uninit+0xa4f9)
SUMMARY: MemorySanitizer: use-of-uninitialized-value $PWD/src/main.rs:5 in uninit::main::hc2731cd4f2ed48f8
Exiting
77
```
|
|
I just tried to build this container locally but it looks like connecting to
ftp.gnu.org requires SNI, so let's build curl/OpenSSL first to ensure that we've
got an SNI-capable client to download gcc/binutils with.
|
|
|
|
|
|
|
|
|
|
Delete the makefile build system
This PR deletes the makefile build system in favor of the rustbuild build system. The beta has now been branched so 1.16 will continue to be buildable from the makefiles, but going forward 1.17 will only be buildable with rustbuild.
Rustbuild has been the default build system [since 1.15.0](https://github.com/rust-lang/rust/pull/37817) and the makefiles were [proposed for deletion](https://internals.rust-lang.org/t/proposal-for-promoting-rustbuild-to-official-status/4368) at this time back in November of last year.
And now with the deletion of these makefiles we can start getting those sweet sweet improvements of using crates.io crates in the compiler!
|
|
Add support for test suites emulated in QEMU
This commit adds support to the build system to execute test suites that cannot
run natively but can instead run inside of a QEMU emulator. A proof-of-concept
builder was added for the `arm-unknown-linux-gnueabihf` target to show off how
this might work.
In general the architecture is to have a server running inside of the emulator
which a local client connects to. The protocol between the server/client
supports compiling tests on the host and running them on the target inside the
emulator.
Closes #33114
|
|
We no longer need these builders as we're no longer testing the old build
system.
|
|
travis: Gate on some minimal support for incremental compilation.
This commit adds a travis job that
1. builds a stage2 compiler in incremental mode (but with empty incremental compilation cache), and
2. builds and runs the run-pass test suite also in incremental mode.
Building incrementally with an empty cache makes sure that the compiler doesn't crash in dependency tracking during bootstrapping. Executing the incrementally built test suite gives some measure of confidence that we generate valid code.
Note, however, that the above does not give strong guarantees about the validity of incremental compilation, it just provides a basis for being able to rely on from-scratch incr. comp. builds as reference values in further tests (which then do actual incremental compilation).
r? @alexcrichton
|
|
This commit adds support to the build system to execute test suites that cannot
run natively but can instead run inside of a QEMU emulator. A proof-of-concept
builder was added for the `arm-unknown-linux-gnueabihf` target to show off how
this might work.
In general the architecture is to have a server running inside of the emulator
which a local client connects to. The protocol between the server/client
supports compiling tests on the host and running them on the target inside the
emulator.
Closes #33114
|
|
|
|
|
|
Using Ubuntu's cross-toolchains for powerpc* and s390x meant they were
depending on glibc symbols from Ubuntu 16.04. And if that host is ever
updated to a new release, the toolchains would raise the bar too.
This switches powerpc, powerpc64, and s390x to use crosstool-ng
toolchains, configured approximately like RHEL6 with kernel 2.6.32 and
glibc 2.12. This ABI level should also be compatible with Debian 7
(wheezy) and Ubuntu 12.04 (precise).
For powerpc64le, the challenge was that only glibc-2.19 officially added
support, but RHEL7 backported those changes to glibc-2.17. The backport
patches are complex and numerous, so instead of trying to push those
into crosstool-ng, this just uses glibc binaries directly from CentOS 7
and builds the toolchain manually.
This is ported from rust-lang/rust-buildbot#149.
r? @alexcrichton
|
|
rustbuild: Start building --enable-extended
This commit adds a new flag to the configure script,
`--enable-extended`, which is intended for specifying a desire to
compile the full suite of Rust tools such as Cargo, the RLS, etc. This
is also an indication that the build system should create combined
installers such as the pkg/exe/msi artifacts.
Currently the `--enable-extended` flag just indicates that combined
installers should be built, and Cargo is itself not compiled just yet
but rather only downloaded from its location. The intention here is to
quickly get to feature parity with the current release process and then
we can start improving it afterwards.
All new files in this PR inside `src/etc/installer` are copied from the
rust-packaging repository.
cc #38531
|
|
This commit adds a new flag to the configure script,
`--enable-extended`, which is intended for specifying a desire to
compile the full suite of Rust tools such as Cargo, the RLS, etc. This
is also an indication that the build system should create combined
installers such as the pkg/exe/msi artifacts.
Currently the `--enable-extended` flag just indicates that combined
installers should be built, and Cargo is itself not compiled just yet
but rather only downloaded from its location. The intention here is to
quickly get to feature parity with the current release process and then
we can start improving it afterwards.
All new files in this PR inside `src/etc/installer` are copied from the
rust-packaging repository.
|
|
This fixes the final issues with the target related to unwinding by disabling
removal of frame pointers.
|
|
|
|
|
|
travis: Pass --enable-llvm-static-stdcpp
All our releases are compiled with this, so let's be sure to do so whenever
`DEPLOY` is set. This'll ensure that we don't have dynamic dependencies on
libstdc++ which LLVM depends on, but instead we link it all statically to have
more portable binaries.
|
|
travis: Get an emscripten builder online
This commit adds a new entry to the Travis matrix which will execute emscripten
test suites. Along the way it updates a few bits of the test suite to continue
passing on emscripten, such as:
* Ignoring i128/u128 tests as they're presumably just not working (didn't
investigate as to why)
* Disabling a few process tests (not working on emscripten)
* Ignore some num tests in libstd (#39119)
* Fix some warnings when compiling
|
|
travis: Expand the `cross` linux image
This expands the `cross` travis matrix entry with a few more targets that our
nightlies are building:
* x86_64-rumprun-netbsd
* arm-unknown-linux-musleabi
* arm-unknown-linux-musleabihf
* armv7-unknown-linux-musleabihf
* mips-unknown-linux-musl
* mipsel-unknown-linux-musl
This commit doesn't compile custom toolchains like our current cross-image does,
but instead compiles musl manually and then compiles libunwind manually (like
x86_64) for use for the ARM targets and just uses openwrt toolchains for the
mips targets.
cc #38531
|
|
travis: Add i586 linux and i686 musl
This commit expands the existing x86_64-musl entry in the Travis matrix to also
build/test i586-unknown-linux-gnu and i686-unknown-linux-musl.
cc #38531
Closes #35599
Closes #39053
|
|
This commit updates the compilers for many of the artifacts that we're producing
on Travis. These compilers are all compiled by crosstool-ng as they're currently
done for the images in which we're building all our cross compiled compilers.
The purpose of this commit is that when we ship binaries the artifacts won't
require a newer glibc, but rather be as compatible as possible with Linux
distributions by working with a very old version of glibc.
This commit always allocates a new matrix entry for the i686/x86_64 builder.
This builder is dedicated to just producing artifacts and eventually we'll
expand it to building other tools like Cargo and the RLS. The other builders
testing i686 and x86_64 won't use these historical toolchains.
|
|
This commit adds a new entry to the Travis matrix which will execute emscripten
test suites. Along the way it updates a few bits of the test suite to continue
passing on emscripten, such as:
* Ignoring i128/u128 tests as they're presumably just not working (didn't
investigate as to why)
* Disabling a few process tests (not working on emscripten)
* Ignore some num tests in libstd (#39119)
* Fix some warnings when compiling
|
|
This commit adds a travis job that builds a stage2 compiler in
incremental mode (but with empty incremental compilation cache).
Building incrementally with an empty cache makes sure that the
compiler doesn't crash in dependency tracking during bootstrapping.
|
|
All our releases are compiled with this, so let's be sure to do so whenever
`DEPLOY` is set. This'll ensure that we don't have dynamic dependencies on
libstdc++ which LLVM depends on, but instead we link it all statically to have
more portable binaries.
|
|
This commit passes the `--release-channel=nightly` flag to all images which have
the `DEPLOY` flag set. This means that we'll name artifacts and the compiler
appropriately.
This reworks a bit how arguments are passed, but for now doesn't change what's
already being passed. Eventually we'll want to avoid enabling debug assertions
and llvm assertions for *all* releases, but I figure we can tackle that a little
bit more down the road.
|
|
This expands the `cross` travis matrix entry with a few more targets that our
nightlies are building:
* x86_64-rumprun-netbsd
* arm-unknown-linux-musleabi
* arm-unknown-linux-musleabihf
* armv7-unknown-linux-musleabihf
* mips-unknown-linux-musl
* mipsel-unknown-linux-musl
This commit doesn't compile custom toolchains like our current cross-image does,
but instead compiles musl manually and then compiles libunwind manually (like
x86_64) for use for the ARM targets and just uses openwrt toolchains for the
mips targets.
|
|
This mirrors a few artifacts that have been flaky to download recently
on our own S3 bucket, which has historically been more reliable.
Closes #39097
|
|
This commit expands the existing x86_64-musl entry in the Travis matrix to also
build/test i586-unknown-linux-gnu and i686-unknown-linux-musl.
cc #38531
Closes #39053
|
|
travis: Expand dist builder coverage
This commit adds six new travis matrix entires for doing cross-compiled
distribution builds of the compiler. The support added in #38731 allows us to
quickly compile a complete suite of distribution artifacts for cross-compiled
platforms, and currently each matrix entry (when fully cached) clocks in around
an hour to finish. Note that a full test run typically takes about two hours
right now.
With further optimizations coming down the pike in #39026 this commit also
starts doubling up cross-compiled distribution builders on each matrix entry. We
initially planned to do one build per entry, but it's looking like we may be
able to get by with more than one in each entry. Depending on how long these
builds take we may even be able to up it to three, but we'll start with two
first.
This commit then completes the suite of cross-compiled compilers that we're
going to compile, adding it for a whole litany of platforms detailed in the
changes to the docker files here. The existing `cross` image is also trimmed
down quite a bit to avoid duplicate work, and we'll eventually provision it for
far more cross compilation as well.
Note that the gcc toolchains installed to compile most of these compilers are
inappropriate for actualy distribution. The glibc they pull in is much newer
than we'd like, so before we turn nightlies off we'll need to tweak these docker
files to custom build toolchains like the current `linux-cross` docker image
does.
|
|
This commit adds six new travis matrix entires for doing cross-compiled
distribution builds of the compiler. The support added in #38731 allows us to
quickly compile a complete suite of distribution artifacts for cross-compiled
platforms, and currently each matrix entry (when fully cached) clocks in around
an hour to finish. Note that a full test run typically takes about two hours
right now.
With further optimizations coming down the pike in #39026 this commit also
starts doubling up cross-compiled distribution builders on each matrix entry. We
initially planned to do one build per entry, but it's looking like we may be
able to get by with more than one in each entry. Depending on how long these
builds take we may even be able to up it to three, but we'll start with two
first.
This commit then completes the suite of cross-compiled compilers that we're
going to compile, adding it for a whole litany of platforms detailed in the
changes to the docker files here. The existing `cross` image is also trimmed
down quite a bit to avoid duplicate work, and we'll eventually provision it for
far more cross compilation as well.
Note that the gcc toolchains installed to compile most of these compilers are
inappropriate for actualy distribution. The glibc they pull in is much newer
than we'd like, so before we turn nightlies off we'll need to tweak these docker
files to custom build toolchains like the current `linux-cross` docker image
does.
|
|
|
|
This commit starts adding the infrastructure for uploading release artifacts
from AppVeyor/Travis on each commit. The idea is that eventually we'll upload a
full release to AppVeyor/Travis in accordance with plans [outlined earlier].
Right now this configures Travis/Appveyor to upload all tarballs in the `dist`
directory, and various images are updated to actually produce tarballs in these
directories. These are nowhere near ready to be actual release artifacts, but
this should allow us to play around with it and test it out. Once this commit
lands we should start seeing artifacts uploaded on each commit.
[outlined earlier]: https://internals.rust-lang.org/t/rust-ci-release-infrastructure-changes/4489
|
|
This commit optimizes the compile time for creating tarballs of cross-host
compilers and as a proof of concept adds two to the standard Travis matrix. Much
of this commit is further refactoring and refining of the `step.rs` definitions
along with the interpretation of `--target` and `--host` flags. This has gotten
confusing enough that I've also added a small test suite to
`src/bootstrap/step.rs` to ensure what we're doing works and doesn't regress.
After this commit when you execute:
./x.py dist --host $MY_HOST --target $MY_HOST
the build system will compile two compilers. The first is for the build platform
and the second is for the host platform. This second compiler is then packaged
up and placed into `build/dist` and is ready to go. With a fully cached LLVM and
docker image I was able to create a cross-host compiler in around 20 minutes
locally.
Eventually we plan to add a whole litany of cross-host entries to the Travis
matrix, but for now we're just adding a few before we eat up all the extra
capacity.
cc #38531
|
|
This commit adds a new entry to the Travis matrix which performs a "distcheck",
which basically means that we create a tarball, extract that tarball, and then
build/test inside there. This ensures that the tarballs we produce are actually
able to be built/tested!
Along the way this also updates the rustbuild distcheck definition to propagate
the configure args from the top-level invocation.
Closes #38691
|
|
|
|
Trim down Travis docker images slightly
Two things we no longer need:
* ccache, we now use sccache
* A `/tmp/obj` dir no longer used
|
|
rustbuild: Compile rustc twice, not thrice
This commit switches the rustbuild build system to compiling the
compiler twice for a normal bootstrap rather than the historical three
times.
Rust is a bootstrapped language which means that a previous version of
the compiler is used to build the next version of the compiler. Over
time, however, we change many parts of compiler artifacts such as the
metadata format, symbol names, etc. These changes make artifacts from
one compiler incompatible from another compiler. Consequently if a
compiler wants to be able to use some artifacts then it itself must have
compiled the artifacts.
Historically the rustc build system has achieved this by compiling the
compiler three times:
* An older compiler (stage0) is downloaded to kick off the chain.
* This compiler now compiles a new compiler (stage1)
* The stage1 compiler then compiles another compiler (stage2)
* Finally, the stage2 compiler needs libraries to link against, so it
compiles all the libraries again.
This entire process amounts in compiling the compiler three times.
Additionally, this process always guarantees that the Rust source tree
can compile itself because the stage2 compiler (created by a freshly
created compiler) would successfully compile itself again. This
property, ensuring Rust can compile itself, is quite important!
In general, though, this third compilation is not required for general
purpose development on the compiler. The third compiler (stage2) can
reuse the libraries that were created during the second compile. In
other words, the second compilation can produce both a compiler and the
libraries that compiler will use. These artifacts *must* be compatible
due to the way plugins work today anyway, and they were created by the
same source code so they *should* be compatible as well.
So given all that, this commit switches the default build process to
only compile the compiler two times, avoiding this third compilation
by copying artifacts from the previous one. Along the way a new entry in
the Travis matrix was also added to ensure that our full bootstrap can
succeed. This entry does not run tests, though, as it should not be
necessary.
To restore the old behavior of a full bootstrap (three compiles) you can
either pass:
./configure --enable-full-bootstrap
or if you're using config.toml:
[build]
full-bootstrap = true
Overall this will hopefully be an easy 33% win in build times of the
compiler. If we do 33% less work we should be 33% faster! This in turn
should affect cycle times and such on Travis and AppVeyor positively as
well as making it easier to work on the compiler itself.
|
