| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
1000 tasks * 2MiB stack size -> 2GiB of virtual memory
On a 64-bit OS, a 32-bit executable has 4GiB available, but the kernel
gets half of the available address space so the limit is 2GiB on 32-bit.
Closes #17044
|
|
This cleans up blatant lies in the concurrency guide, and modernizes it
a bit. There's a lot more to do, but until I get to it, let's make it a
little bit better.
|
|
|
|
[breaking-change]
|
|
* channel() - #[unstable]. This will likely remain forever
* sync_channel(n: int) - #[unstable with comment]. Concerns have ben raised
about the usage of the term "synchronous channel" because that generally only
applies to the case where n == 0. If n > 0 then these channels are often
referred to as buffered channels.
* Sender::send(), SyncSender::send(), Receiver::recv() - #[experimental]. These
functions directly violate the general guideline of not providing a failing
and non-failing variant. These functions were explicitly selected for being
excused from this guideline, but recent discussions have cast doubt on that
decision. These functions are #[experimental] for now until a decision is made
as they are candidates for removal.
* Sender::send_opt(), SyncSender::send_opt(), Receiver::recv_opt() - #[unstable
with a comment]. If the above no-`_opt` functions are removed, these functions
will be renamed to the non-`_opt` variants.
* SyncSender::try_send(), Receiver::try_recv() - #[unstable with a comment].
These return types of these functions to not follow general conventions. They
are consistent with the rest of the api, but not with the rest of the
libraries. Until their return types are nailed down, these functions are
#[unstable].
* Receiver::iter() - #[unstable]. This will likely remain forever.
* std::com::select - #[experimental]. The functionality is likely to remain in
some form forever, but it is highly unlikely to remain in its current form. It
is unknown how much breakage this will cause if and when the api is
redesigned, so the entire module and its components are all experimental.
* DuplexStream - #[deprecated]. This type is not composable with other channels
in terms of selection or other expected locations. It can also not be used
with ChanWriter and ChanReader, for example. Due to it being only lightly
used, and easily replaced with two channels, this type is being deprecated and
slated for removal.
* Clone for {,Sync}Sender - #[unstable]. This will likely remain forever.
|
|
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
|
|
|
|
This commit shuffles around some of the `rand` code, along with some
reorganization. The new state of the world is as follows:
* The librand crate now only depends on libcore. This interface is experimental.
* The standard library has a new module, `std::rand`. This interface will
eventually become stable.
Unfortunately, this entailed more of a breaking change than just shuffling some
names around. The following breaking changes were made to the rand library:
* Rng::gen_vec() was removed. This has been replaced with Rng::gen_iter() which
will return an infinite stream of random values. Previous behavior can be
regained with `rng.gen_iter().take(n).collect()`
* Rng::gen_ascii_str() was removed. This has been replaced with
Rng::gen_ascii_chars() which will return an infinite stream of random ascii
characters. Similarly to gen_iter(), previous behavior can be emulated with
`rng.gen_ascii_chars().take(n).collect()`
* {IsaacRng, Isaac64Rng, XorShiftRng}::new() have all been removed. These all
relied on being able to use an OSRng for seeding, but this is no longer
available in librand (where these types are defined). To retain the same
functionality, these types now implement the `Rand` trait so they can be
generated with a random seed from another random number generator. This allows
the stdlib to use an OSRng to create seeded instances of these RNGs.
* Rand implementations for `Box<T>` and `@T` were removed. These seemed to be
pretty rare in the codebase, and it allows for librand to not depend on
liballoc. Additionally, other pointer types like Rc<T> and Arc<T> were not
supported. If this is undesirable, librand can depend on liballoc and regain
these implementations.
* The WeightedChoice structure is no longer built with a `Vec<Weighted<T>>`,
but rather a `&mut [Weighted<T>]`. This means that the WeightedChoice
structure now has a lifetime associated with it.
* The `sample` method on `Rng` has been moved to a top-level function in the
`rand` module due to its dependence on `Vec`.
cc #13851
[breaking-change]
|
|
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes #12019
[breaking-change]
|
|
[breaking-change]
|
|
[breaking-change]
|
|
|
|
|
|
Lots of assorted things here and there, all the details are in the commits.
Closes #11712
|
|
|
|
Most of the links I've removed are for types that don't exist anymore with the exception of `SendReceiver` though I'm not sure how useful it is to link to that without the accompanying `Receiver` and `Sender` and I don't know how useful those links are when they're discussed below and `channel`/`sync_channel` is on the `std::comm` page already linked.
|
|
Improve tutorial discussion of closures, e.g. with respect to type inference and variable capture.
Fix #13621
---- original description follows
I'd like this pulled to master if possible but if not I'd appreciate comments on what I need to change. I found the closures difficult to understand as they were so I tried to explain it so I would've had an easier time understanding it. I think it's better at least, somewhat.
I don't know that everyone liked the `-> ()` I included but I thought explicit is best to aid understanding. I thought it was much harder to understand than it should have been.
[EDIT] - Clicked too early.
This doesn't `make check` without errors on my Xubuntu on Virtualbox machine. Not sure why. I don't think I changed anything problematic. I'll try `make check` on master tomorrow.
Opened https://github.com/mozilla/rust/issues/13621 regarding this.
|
|
|
|
This primary fix brought on by this upgrade is the proper matching of the ```
and ~~~ doc blocks. This also moves hoedown to a git submodule rather than a
bundled repository.
Additionally, hoedown is stricter about code blocks, so this ended up fixing a
lot of invalid code blocks (ending with " ```" instead of "```", or ending with
"~~~~" instead of "~~~").
Closes #12776
|
|
This pull request:
- Merges the `Round` trait into the `Float` trait, continuing issue #10387.
- Has floating point functions take their parameters by value.
- Cleans up the formatting and organisation in the definition and implementations of the `Float` trait.
More information on the breaking changes can be found in the commit messages.
|
|
- Use Fira Sans for headlines, Heuristica for the body (Adobe Utopia derivative). Both are licensed under the SIL OFL license. (I didn't include BoldItalic because it is sparingly used.)
- Split TOC into 2 columns for the docs except manual (too tall, too wide to be readable).
- Some fixes to rustdoc, bring styles in coherency with eachother
- A few tweaks
Two examples: [modified tutorial](http://adrientetar.legtux.org/cached/rust-docs/tutorial.htm) and [modified manual](http://adrientetar.legtux.org/cached/rust-docs/manual.htm).
Rustdoc got some fixes, here is [modified `enum.FileType`](http://adrientetar.legtux.org/cached/rust-docs/enum.FileType.htm), [modified `std`](http://adrientetar.legtux.org/cached/rust-docs/std.htm) and [modified `std::io`](http://adrientetar.legtux.org/cached/rust-docs/io.htm).
#13484, #13485 follow-up.
cc @brson
|
|
|
|
|
|
Make all of the methods in `std::num::Float` take `self` and their other parameters by value.
Some of the `Float` methods took their parameters by value, and others took them by reference. This standardises them to one convention. The `Float` trait is intended for the built in IEEE 754 numbers only so we don't have to worry about the trait serving types of larger sizes.
[breaking-change]
|
|
|
|
|
|
|
|
|
|
Closes #12702
|
|
The `Float` trait provides correct `min` and `max` methods on floating
point types, providing a consistent result regardless of the order the
parameters are passed.
These generic functions do not take the necessary performance hit to
correctly support a partial order, so the true requirement should be
given as a type bound.
Closes #12712
|
|
The `Float` trait provides correct `min` and `max` methods on floating
point types, providing a consistent result regardless of the order the
parameters are passed.
These generic functions do not take the necessary performance hit to
correctly support a partial order, so the true requirement should be
given as a type bound.
Closes #12712
|
|
* Chan<T> => Sender<T>
* Port<T> => Receiver<T>
* Chan::new() => channel()
* constructor returns (Sender, Receiver) instead of (Receiver, Sender)
* local variables named `port` renamed to `rx`
* local variables named `chan` renamed to `tx`
Closes #11765
|
|
|
|
The code examples are up to date, but the surrounding explanations are not.
|
|
This was previously implemented, and it just needed a snapshot to go through
|
|
This, the Nth rewrite of channels, is not a rewrite of the core logic behind
channels, but rather their API usage. In the past, we had the distinction
between oneshot, stream, and shared channels, but the most recent rewrite
dropped oneshots in favor of streams and shared channels.
This distinction of stream vs shared has shown that it's not quite what we'd
like either, and this moves the `std::comm` module in the direction of "one
channel to rule them all". There now remains only one Chan and one Port.
This new channel is actually a hybrid oneshot/stream/shared channel under the
hood in order to optimize for the use cases in question. Additionally, this also
reduces the cognitive burden of having to choose between a Chan or a SharedChan
in an API.
My simple benchmarks show no reduction in efficiency over the existing channels
today, and a 3x improvement in the oneshot case. I sadly don't have a
pre-last-rewrite compiler to test out the old old oneshots, but I would imagine
that the performance is comparable, but slightly slower (due to atomic reference
counting).
This commit also brings the bonus bugfix to channels that the pending queue of
messages are all dropped when a Port disappears rather then when both the Port
and the Chan disappear.
|
|
|
|
We generate documentation into the doc/ directory, so we shouldn't be
intermingling source files with generated files
|
