| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Rollup of 9 pull requests
Successful merges:
- #134531 ([rustdoc] Add `--extract-doctests` command-line flag)
- #135860 (Compiler: Finalize dyn compatibility renaming)
- #135992 (Improve documentation when adding a new target)
- #136194 (Support clobber_abi in BPF inline assembly)
- #136325 (Delay a bug when indexing unsized slices)
- #136326 (Replace our `LLVMRustDIBuilderRef` with LLVM-C's `LLVMDIBuilderRef`)
- #136330 (Remove unnecessary hooks)
- #136336 (Overhaul `rustc_middle::util`)
- #136341 (Remove myself from vacation)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
|
|
|
|
Improve documentation when adding a new target
https://github.com/rust-lang/rust/pull/133631#issuecomment-2607877936 shows that it can be a bit difficult process-wise to add a new target.
I've added a bit of text to the docs, suggesting that users add the target defintion/spec first, and later work on `std` support.
I also found that we have two places where we document how to add a new target. I've linked these for now, but they should probably be merged somehow in the future.
`@rustbot` label A-docs
r? compiler
CC `@workingjubilee` who's worked a lot on target specs IIRC.
|
|
r=notriddle,aDotInTheVoid
[rustdoc] Add `--extract-doctests` command-line flag
Part of https://github.com/rust-lang/rust/issues/134529.
It was discussed with the Rust-for-Linux project recently that they needed a way to extract doctests so they can modify them and then run them more easily (look for "a way to extract doctests" [here](https://github.com/Rust-for-Linux/linux/issues/2)).
For now, I output most of `ScrapedDoctest` fields in JSON format with `serde_json`. So it outputs the following information:
* filename
* line
* langstr
* text
cc `@ojeda`
r? `@notriddle`
|
|
Rollup of 9 pull requests
Successful merges:
- #132156 (When encountering unexpected closure return type, point at return type/expression)
- #133429 (Autodiff Upstreaming - rustc_codegen_ssa, rustc_middle)
- #136281 (`rustc_hir_analysis` cleanups)
- #136297 (Fix a typo in profile-guided-optimization.md)
- #136300 (atomic: extend compare_and_swap migration docs)
- #136310 (normalize `*.long-type.txt` paths for compare-mode tests)
- #136312 (Disable `overflow_delimited_expr` in edition 2024)
- #136313 (Filter out RPITITs when suggesting unconstrained assoc type on too many generics)
- #136323 (Fix a typo in conventions.md)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
Add target and compile the amdgpu llvm backend.
|
|
Co-Authored-By: Jieyou Xu <jieyouxu@outlook.com>
|
|
Fix a typo in conventions.md
Introduced in #135950
|
|
Disable `overflow_delimited_expr` in edition 2024
This reverts the style guide changes and sets the default to "false" in rustfmt for style edition 2024.
r? `@ytmimi`
cc `@rust-lang/style` `@rust-lang/rustfmt`
|
|
Fix a typo in profile-guided-optimization.md
It's either "profile-guided" or "profiled-guided" and I think it'sw the former. :)
|
|
Autodiff Upstreaming - rustc_codegen_ssa, rustc_middle
This PR should not be merged until the rustc_codegen_llvm part is merged.
I will also alter it a little based on what get's shaved off from the cg_llvm PR,
and address some of the feedback I received in the other PR (including cleanups).
I am putting it already up to
1) Discuss with `@jieyouxu` if there is more work needed to add tests to this and
2) Pray that there is someone reviewing who can tell me why some of my autodiff invocations get lost.
Re 1: My test require fat-lto. I also modify the compilation pipeline. So if there are any other llvm-ir tests in the same compilation unit then I will likely break them. Luckily there are two groups who currently have the same fat-lto requirement for their GPU code which I have for my autodiff code and both groups have some plans to enable support for thin-lto. Once either that work pans out, I'll copy it over for this feature. I will also work on not changing the optimization pipeline for functions not differentiated, but that will require some thoughts and engineering, so I think it would be good to be able to run the autodiff tests isolated from the rest for now. Can you guide me here please?
For context, here are some of my tests in the samples folder: https://github.com/EnzymeAD/rustbook
Re 2: This is a pretty serious issue, since it effectively prevents publishing libraries making use of autodiff: https://github.com/EnzymeAD/rust/issues/173. For some reason my dummy code persists till the end, so the code which calls autodiff, deletes the dummy, and inserts the code to compute the derivative never gets executed. To me it looks like the rustc_autodiff attribute just get's dropped, but I don't know WHY? Any help would be super appreciated, as rustc queries look a bit voodoo to me.
Tracking:
- https://github.com/rust-lang/rust/issues/124509
r? `@jieyouxu`
|
|
for RFC 3550, tracking issue #123741
|
|
Fix deduplication mismatches in vtables leading to upcasting unsoundness
We currently have two cases where subtleties in supertraits can trigger disagreements in the vtable layout, e.g. leading to a different vtable layout being accessed at a callsite compared to what was prepared during unsizing. Namely:
### #135315
In this example, we were not normalizing supertraits when preparing vtables. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Identity {
type Selff;
}
impl<Selff> Identity for Selff {
type Selff = Selff;
}
trait Middle<T>: Supertrait<()> + Supertrait<T> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T> Middle<T> for () {}
trait Trait: Middle<<() as Identity>::Selff> {}
impl Trait for () {}
fn main() {
(&() as &dyn Trait as &dyn Middle<()>).say_hello(&0);
}
```
When we prepare `dyn Trait`, we see a supertrait of `Middle<<() as Identity>::Selff>`, which itself has two supertraits `Supertrait<()>` and `Supertrait<<() as Identity>::Selff>`. These two supertraits are identical, but they are not duplicated because we were using structural equality and *not* considering normalization. This leads to a vtable layout with two trait pointers.
When we upcast to `dyn Middle<()>`, those two supertraits are now the same, leading to a vtable layout with only one trait pointer. This leads to an offset error, and we call the wrong method.
### #135316
This one is a bit more interesting, and is the bulk of the changes in this PR. It's a bit similar, except it uses binder equality instead of normalization to make the compiler get confused about two vtable layouts. In the example,
```
trait Supertrait<T> {
fn _print_numbers(&self, mem: &[usize; 100]) {
println!("{mem:?}");
}
}
impl<T> Supertrait<T> for () {}
trait Trait<T, U>: Supertrait<T> + Supertrait<U> {
fn say_hello(&self, _: &usize) {
println!("Hello!");
}
}
impl<T, U> Trait<T, U> for () {}
fn main() {
(&() as &'static dyn for<'a> Trait<&'static (), &'a ()>
as &'static dyn Trait<&'static (), &'static ()>)
.say_hello(&0);
}
```
When we prepare the vtable for `dyn for<'a> Trait<&'static (), &'a ()>`, we currently consider the PolyTraitRef of the vtable as the key for a supertrait. This leads two two supertraits -- `Supertrait<&'static ()>` and `for<'a> Supertrait<&'a ()>`.
However, we can upcast[^up] without offsetting the vtable from `dyn for<'a> Trait<&'static (), &'a ()>` to `dyn Trait<&'static (), &'static ()>`. This is just instantiating the principal trait ref for a specific `'a = 'static`. However, when considering those supertraits, we now have only one distinct supertrait -- `Supertrait<&'static ()>` (which is deduplicated since there are two supertraits with the same substitutions). This leads to similar offsetting issues, leading to the wrong method being called.
[^up]: I say upcast but this is a cast that is allowed on stable, since it's not changing the vtable at all, just instantiating the binder of the principal trait ref for some lifetime.
The solution here is to recognize that a vtable isn't really meaningfully higher ranked, and to just treat a vtable as corresponding to a `TraitRef` so we can do this deduplication more faithfully. That is to say, the vtable for `dyn for<'a> Tr<'a>` and `dyn Tr<'x>` are always identical, since they both would correspond to a set of free regions on an impl... Do note that `Tr<for<'a> fn(&'a ())>` and `Tr<fn(&'static ())>` are still distinct.
----
There's a bit more that can be cleaned up. In codegen, we can stop using `PolyExistentialTraitRef` basically everywhere. We can also fix SMIR to stop storing `PolyExistentialTraitRef` in its vtable allocations.
As for testing, it's difficult to actually turn this into something that can be tested with `rustc_dump_vtable`, since having multiple supertraits that are identical is a recipe for ambiguity errors. Maybe someone else is more creative with getting that attr to work, since the tests I added being run-pass tests is a bit unsatisfying. Miri also doesn't help here, since it doesn't really generate vtables that are offset by an index in the same way as codegen.
r? `@lcnr` for the vibe check? Or reassign, idk. Maybe let's talk about whether this makes sense.
<sup>(I guess an alternative would also be to not do any deduplication of vtable supertraits (or only a really conservative subset) rather than trying to normalize and deduplicate more faithfully here. Not sure if that works and is sufficient tho.)</sup>
cc `@steffahn` -- ty for the minimizations
cc `@WaffleLapkin` -- since you're overseeing the feature stabilization :3
Fixes #135315
Fixes #135316
|
|
Introduced in #135950
|
|
|
|
This reverts commit bed0c9d97f098b71f4968808ab16d9ba40bce49c.
|
|
|
|
Rollup of 7 pull requests
Successful merges:
- #133636 ([rustdoc] Add sans-serif font setting)
- #135434 (Match Ergonomics 2024: update edition 2024 behavior of feature gates)
- #135739 (Clean up uses of the unstable `dwarf_version` option)
- #135882 (simplify `similar_tokens` from `Option<Vec<_>>` to `&[_]`)
- #136179 (Allow transmuting generic pattern types to and from their base)
- #136199 (Fix a couple Emscripten tests)
- #136251 (use impl Into<String> instead of explicit type args with bounds)
r? `@ghost`
`@rustbot` modify labels: rollup
|
|
|
|
|
|
It's either "profile-guided" or "profiled-guided" and I think it'sw the former. :)
|
|
Clean up uses of the unstable `dwarf_version` option
- Consolidate calculation of the effective value.
- Check the target `DebuginfoKind` instead of using `is_like_msvc`.
- Add the tracking issue to the unstable book page for this feature.
cc #103057
|
|
Match Ergonomics 2024: update edition 2024 behavior of feature gates
This updates the edition 2024 behavior of the feature gates `ref_pat_eat_one_layer_2024_structural` and `ref_pat_eat_one_layer_2024` to correspond to the left and right typing rules compared [here](https://nadrieril.github.io/typing-rust-patterns/?compare=true&opts2=AQEBAAABAQABAgIAAQEBAAEBAAABAAA%3D&opts1=AQEBAgEBAQEBAgIAAAAAAAAAAAAAAAA%3D&mode=rules&do_cmp=true&ty_d=3&style=SequentBindingMode), respectively. I'll implement the proposed new behavior for editions ≤ 2021 in another PR.
The tests are split up a bit awkwardly for practical reasons, but I've added new tests from 3 places:
- I got tests for where the typing rules differ from the "Compare" tab of the page linked above. These had to be split up based on where the errors are emitted and how rustfixable they are, so they've ended up in different files to keep tidy. Within each file, though, the order of the tests matches the order the typing differences appear in that comparison (as of when this was written).
- I used [this other comparison](https://nadrieril.github.io/typing-rust-patterns/?q=%5B%26mut+%26%28mut+x%29%5D%3A+%26mut+%5B%26CT%5D&compare=true&opts2=AQEBAgABAQEBAgIAAQEBAAEBAAABAAA%3D&opts1=AQEBAgEBAQEBAgIAAAAAAAAAAAAAAAA%3D&mode=compare&do_cmp=true&ty_d=3&style=SequentBindingMode) to test the `Deref(EatInner, FallbackToOuter)` rule of the left/"structural"/eat-inner ruleset. These are all in `well-typed-edition-2024.rs`.
- I added some select tests for cases where the new typing rules differ from current stable Rust. I had to be pickier about what I included here, but I tried to make sure each typing rule got some coverage. That said, my approach for these tests was a bit ad-hoc, so I may have missed something.
Relevant tracking issue: #123076
r? ````@ghost````
|
|
Simplify and consolidate the way we handle construct `OutlivesEnvironment` for lexical region resolution
This is best reviewed commit-by-commit. I tried to consolidate the API for lexical region resolution *first*, then change the API when it was finally behind a single surface.
r? lcnr or reassign
|
|
|
|
|
|
|
|
Rustc dev guide subtree update
r? `@Kobzol`
|
|
|
|
|
|
Make crate AST mutation accessible for driver callback
Following #134130, this brings back the ability to mutate AST before lowering.
|
|
|
|
|
|
|
|
|
|
Add a link to declare_lint! macro doc in diagnostics.md
|
|
|
|
|
|
Update books
## rust-lang/book
3 commits in 82a4a49789bc96db1a1b2a210b4c5ed7c9ef0c0d..fa312a343fbff01bc6cef393e326817f70719813
2025-01-22 17:14:29 UTC to 2025-01-22 15:09:26 UTC
- chore: reformat src with dprint (rust-lang/book#4211)
- Redirects: get rid of the weird gap in Ch. 20 sections! (rust-lang/book#4209)
- Document that `use` is also for `precise capturing` (rust-lang/book#4210)
## rust-lang/edition-guide
1 commits in d56e0f3a0656b7702ca466d4b191e16c28262b82..4ed5a1a4a2a7ecc2e529a5baaef04f7bc7917eda
2025-01-21 21:39:56 UTC to 2025-01-21 21:39:56 UTC
- Add alternatives for static-mut-refs (rust-lang/edition-guide#354)
## rust-lang/nomicon
3 commits in 625b200e5b33a5af35589db0bc454203a3d46d20..bc2298865544695c63454fc1f9f98a3dc22e9948
2025-01-23 19:01:24 UTC to 2025-01-20 14:37:52 UTC
- corrected grammatical error. (rust-lang/nomicon#477)
- Remove `#![start]` attribute (rust-lang/nomicon#478)
- Update guidance on uninitialized fields to use &raw mut instead of addr_of_mut! (rust-lang/nomicon#476)
## rust-lang/reference
10 commits in 293af991003772bdccf2d6b980182d84dd055942..93b921c7d3213d38d920f7f905a3bec093d2217d
2025-01-25 21:59:01 UTC to 2025-01-14 17:28:04 UTC
- distinct 'static' items never overlap (rust-lang/reference#1657)
- Change `'_static` to `'static` as an invalid lifetime parameter name (rust-lang/reference#1721)
- reword reference about inert attributes (rust-lang/reference#1719)
- Provide a better error message for broken links in mdbook-spec (rust-lang/reference#1716)
- Remove unstable vectorcall (rust-lang/reference#1717)
- Move the function pointer example (rust-lang/reference#1718)
- references and Box must be non-null (rust-lang/reference#1715)
- Fix filename for theme customization (rust-lang/reference#1711)
- Add Identifier Syntax to Several Chapters (rust-lang/reference#1597)
- move r[rules] to the left of the main body, using a grid (rust-lang/reference#1710)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These are very bare-bones, only intended to provide some documentation
of what these feature gates are and aren't yet implementing.
|
|
|
|
|
