| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
This does not yet change the compiler and libraries from `*T` to `*const T` as
it will require a snapshot to do so.
cc #7362
---
Note that the corresponding RFC, https://github.com/rust-lang/rfcs/pull/68, has not yet been accepted. It was [discussed at the last meeting](https://github.com/rust-lang/rust/wiki/Meeting-weekly-2014-06-10#rfc-pr-68-unsafe-pointers-rename-t-to-const-t) and decided to be accepted, however. I figured I'd get started on the preliminary work for the RFC that will be required regardless.
|
|
/usr/bin/env appears to be more portable.
|
|
|
|
There were still Total{Ord,Eq} in docs and src/etc
|
|
Replace its usage with byte string literals, except in `bytes!()` tests.
Also add a new snapshot, to be able to use the new b"foo" syntax.
The src/etc/2014-06-rewrite-bytes-macros.py script automatically
rewrites `bytes!()` invocations into byte string literals.
Pass it filenames as arguments to generate a diff that you can inspect,
or `--apply` followed by filenames to apply the changes in place.
Diffs can be piped into `tip` or `pygmentize -l diff` for coloring.
|
|
|
|
|
|
|
|
|
|
|
|
Define a command :Run to compile and run the current file. This supports
unnamed buffers (by writing to a temporary file). See the comment above
the command definition for notes on usage.
Define <D-r> and <D-R> mappings for :Run to make it easier to invoke in
MacVim.
Define a command :Expand to display the --pretty expanded output for the
current file. This can be configured to use different pretty types. See
the comment above the command definition for notes on usage.
Create an autoload file and put function definitions there to speed up
load time.
|
|
|
|
|
|
This addresses the font lock regression introduced by the earlier pull
request #14818 - attributes are no longer be highligted inside of comments
and strings.
Also add some font lock test infrastructure and some tests for attribute
font locking.
|
|
This addresses two problems noted in #14347: the highlight of `#foo]` as an attribute, and the non-highlight of `#[foo = "bar"]`.
|
|
|
|
|
|
|
|
Everyone agreed.
Related to #14248, close #14720
@brson OK?
|
|
This does not yet change the compiler and libraries from `*T` to `*const T` as
it will require a snapshot to do so.
cc #7362
|
|
Everyone agreed.
Related to #14248, close #14718
@brson OK?
|
|
Everyone agreed.
Related to #14248, close #14720
|
|
Everyone agreed.
Related to #14248, close #14718
|
|
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
|
|
Setting `OVERRIDE` to `t` overrides the conflicting highlight Emacs
places on string literals.
Fix #14347
|
|
part of #14347
|
|
Part of #14248
Main contributors are @pcwalton, @alexcrichton and me. Only
@dguenther appear in git blame as a minor contribution, but it is
only adding the rust license, so removed by this relicensing.
|
|
Part of #14248
The authors are @pcwalton and @BurntSushi, and we have their agreement.
|
|
part of #14248, fix #14420
Removed @richo's contribution (outdated comment)
Quoting @brson: let's move forward with this one. The only
statement I'm missing is @richo's and it sounds like his was a
minor patch.
|
|
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
|
|
[breaking-change]
|
|
Attempt to highlight the placement expression in a `box (expr) foo`
expression. Also treat GC as a keyword within the placement expression.
This doesn't work correctly for arbitrary expressions. Notably, this
makes no attempt at balancing delimiters. I believe handling that will
require rewriting the syntax rules to add a region for every pair of
delimiters. That may be a desirable thing to do in the end, because we
can then rewrite our indent rules based on the syntax and get rid of
cindent(), but for the time being, we'll just live with the limitation.
|
|
|
|
Two line summary: Distinguish HOST_RPATH and TARGET_RPATH; added
RPATH_LINK_SEARCH; skip tests broken in stage1; general cleanup.
`HOST_RPATH_VAR$(1)_T_$(2)_H_$(3)` and `TARGET_RPATH_VAR$(1)_T_$(2)_H_$(3)`
both match the format of the old `RPATH_VAR$(1)_T_$(2)_H_$(3)` (which
is still being set the same way that it was before, to one of either
HOST/TARGET depending on what stage we are building). Namely, the format
is <XXX>_RPATH_VAR = "<LD_LIB_PATH_ENVVAR>=<COLON_SEP_PATH_ENTRIES>"
What this commit does:
* Pass both of the (newly introduced) HOST and TARGET rpath setup vars
to `maketest.py`
* Update `maketest.py` to no longer update the LD_LIBRARY_PATH itself
Instead, it passes along the HOST and TARGET rpath setup vars in
environment variables `HOST_RPATH_ENV` and `TARGET_RPATH_ENV`
* Also, pass the current stage number to maketest.py; it in turn
passes it (via an env var) to run-make tests.
This allows the run-make tests to selectively change behavior
(e.g. turn themselves off) to deal with incompatibilities with
e.g. stage1.
* Cleanup: Distinguish in tools.mk between the command to run (`RUN`)
and the file to generate to drive that command (`RUN_BINFILE`). The
main thing this enables is that `RUN` can now setup the
`TARGET_RPATH_ENV` without having to dirty up the runner code in
each of the `run-make` Makefiles.
* Cleanup: Factored out commands to delete dylib/rlib into
REMOVE_DYLIBS/REMOVE_RLIBS.
There were places where we were only calling `rm $(call DYLIB,foo)`
even though we really needed to get rid of the whole glob (at least
based on alex's findings on #13753 that removing the symlink does not
suffice).
Therefore rather than peppering the code with the awkward
`rm $(TMPDIR)/$(call DYLIB_GLOB,foo)`, I instead introduced a common
`REMOVE_DYLIBS` user function that expands into that when called.
After I adding an analogous `REMOVE_RLIBS`, I changed all of the
existing calls that rm dylibs or rlibs to use these routines
instead.
Note that the latter is not a true refactoring since I may have
changed cases where it was our intent to only remove the sym-link.
(But if that is the case, then we need to more deeply investigate
alex's findings on #13753 where the system was still dynamically
loading up the non-symlinked libraries that it finds on the load
path.)
* Added RPATH_LINK_SEARCH command and use it on Linux.
On some platforms, namely Linux, when you have libboot.so that has
its internal rpath set (to e.g. $(ORIGIN)/path/to/HOSTDIR), the
linker still complains when you do the link step and it does not
know where to find libraries that libboot.so depends upon that live
in HOSTDIR (think e.g. librustuv.so).
As far as I can tell, the GNU linker will consult the
LD_LIBRARY_PATH as part of the linking process to find such
libraries. But if you want to be more careful and not override
LD_LIBRARY_PATH for the `gcc` invocation, then you need some other
way to tell the linker where it can find the libraries that
libboot.so needs. The solution to this on Linux is the
`-Wl,-rpath-link` command line option.
However, this command line option does not exist on Mac OS X, (which
appears to be figuring out how to resolve the libboot.dylib
dependency by some other means, perhaps by consulting the rpath
setting within libboot.dylib).
So, in order to abstract over this distinction, I added the
RPATH_LINK_SEARCH macro to the run-make infrastructure and added
calls to it where necessary to get Linux working. On architectures
other than Linux, the macro expands to nothing.
* Disable miscellaneous tests atop stage1.
* An especially interesting instance of the previous bullet point:
Excuse regex from doing rustdoc tests atop stage1.
This was a (nearly-) final step to get `make check-stage1` working
again.
The use of a special-case check for regex here is ugly but is
analogous other similar checks for regex such as the one that landed
in PR #13844.
The way this is written, the user will get a reminder that
doc-crate-regex is being skipped whenever their rules attempt to do
the crate documentation tests. This is deliberate: I want people
running `make check-stage1` to be reminded about which cases are
being skipped. (But if such echo noise is considered offensive, it
can obviously be removed.)
* Got windows working with the above changes.
This portion of the commit is a cleanup revision of the (previously
mentioned on try builds) re-architecting of how the LD_LIBRARY_PATH
setup and extension is handled in order to accommodate Windows' (1.)
use of `$PATH` for that purpose and (2.) use of spaces in `$PATH`
entries (problematic for make and for interoperation with tools at
the shell).
* In addition, since the code has been rearchitected to pass the
HOST_RPATH_DIR/TARGET_RPATH_DIR rather than a whole sh
environment-variable setting command, there is no need to for the
convert_path_spec calls in maketest.py, which in fact were put in
place to placate Windows but were now causing the Windows builds to
fail. Instead we just convert the paths to absolute paths just like
all of the other path arguments.
Also, note for makefile hackers: apparently you cannot quote operands
to `ifeq` in Makefile (or at least, you need to be careful about
adding them, e.g. to only one side).
|
|
There's no need to include this specific flag just for android. We can
already deal with what it tries to solve by using -C linker=/path/to/cc
and -C ar=/path/to/ar. The Makefiles for rustc already set this up when
we're crosscompiling.
I did add the flag to compiletest though so it can find gdb. Though, I'm
pretty sure we don't run debuginfo tests on android anyways right now.
[breaking-change]
|
|
The Normalizations iterator has been renamed to Decompositions.
It does not currently include all forms of Unicode normalization,
but only encompasses decompositions.
If implemented recomposition would likely be a separate iterator
which works on the result of this one.
[breaking-change]
|
|
|
|
|
|
|
|
|
|
|
|
Since rust-top-item-beg-re hasn't been defined yet, using defvar instead of
setq is more appropriate here (and also silences compilation warnings).
|
|
cindent handles the following case incorrectly:
impl X {
b: int,
//
c: int,
}
if you try and insert a new line after the `c` declaration.
To fix this, fix the get_line_trimmed() function to work properly, and
then extend GetRustIndent to keep searching backwards until it finds a
non-blank line after trimming. This lets it handle the trailing comma
case properly, as if the comment were never there.
Fixes #14041.
|
|
This keyword is about to be used much more often than it was a few weeks ago,
it's time to tell editors about the new keyword.
|
|
|
|
This keyword is about to be used much more often than it was a few weeks ago,
it's time to tell editors about the new keyword.
|
|
If an unbalanced [ exists in a string or comment, this should not be
considered when calculating the indent at the top level.
Similarly, when testing for ({/}) to see if we're at the top level to
begin with, strings and comments should be skipped.
|
|
If an unbalanced [ exists in a string or comment, this should not be
considered when calculating the indent at the top level.
Similarly, when testing for ({/}) to see if we're at the top level to
begin with, strings and comments should be skipped.
|
|
Lazy loading with autoload will result in faster startup time for Emacs
users and is generally the recommended approach for major modes.
|
