| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Stabilize ptr::slice_from_raw_parts[_mut]
Closes #36925, the tracking issue.
Initial impl: #60667
r? @rust-lang/libs
In addition to stabilizing, I've adjusted the example of `ptr::slice_from_raw_parts` to use `slice_from_raw_parts` instead of `slice_from_raw_parts_mut`, which was unnecessary for the example as written.
|
|
|
|
Add leading_ones and trailing_ones methods to the primitive integer types
I was surprised these were missing (given that `leading_zeros` and `trailing_zeros` exist), and they seem trivial and hopefully not controversial.
Note that there's some precedent in that `count_ones` and `count_zeros` are both supported even though only one of these has an intrinsic.
I'm not sure if these need a `rustc_const_unstable` flag (the tests don't seem to mind that it's missing). I just made them const, since there's not really any reason for these to be non-const when the `_zeros` variants are const.
Note: My understanding is trivial stuff like (hopefully) this can land without an RFC, but I'm not fully sure about the process though. Questions like "when does the tracking issue get filed?", are a total mystery to me. So, any guidance is appreciated, and sorry in advance if I should have gone through some more involved process for this.
|
|
|
|
Implement `DebugStruct::non_exhaustive`.
This patch adds a function (finish_non_exhaustive) to add ellipsis before the closing brace when formatting using `DebugStruct`.
## Example
```rust
#![feature(debug_non_exhaustive)]
use std::fmt;
struct Bar {
bar: i32,
hidden: f32,
}
impl fmt::Debug for Bar {
fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result {
fmt.debug_struct("Bar")
.field("bar", &self.bar)
.non_exhaustive(true) // Show that some other field(s) exist.
.finish()
}
}
assert_eq!(
format!("{:?}", Bar { bar: 10, hidden: 1.0 }),
"Bar { bar: 10, .. }",
);
```
|
|
|
|
Reset Formatter flags on exit from pad_integral
This fixes a bug where after calling pad_integral with appropriate flags, the
fill and alignment flags would be set to '0' and 'Right' and left as such even
after exiting pad_integral, which meant that future calls on the same Formatter
would get incorrect flags reported.
This is quite difficult to observe in practice, as almost all formatting
implementations in practice don't call `Display::fmt` directly, but rather use
`write!` or a similar macro, which means that they cannot observe the effects of
the wrong flags (as `write!` creates a fresh Formatter instance). However, we
include a test case.
A manual check leads me to believe this is the only case where we failed to reset the flags appropriately, but I could have missed something.
|
|
|
|
|
|
|
|
Don't require `allow_internal_unstable` unless `staged_api` is enabled.
#63770 changed `qualify_min_const_fn` to require `allow_internal_unstable` for *all* crates that used an unstable feature, regardless of whether `staged_api` was enabled or the `fn` that used that feature was stably const. In practice, this meant that every crate in the ecosystem that wanted to use nightly features added `#![feature(const_fn)]`, which skips `qualify_min_const_fn` entirely.
After this PR, crates that do not have `#![feature(staged_api)]` will only need to enable the feature they are interested in. For example, `#![feature(const_if_match)]` will be enough to enable `if` and `match` in constants. Crates with `staged_api` (e.g., `libstd`) require `#[allow_internal_unstable]` to be added to a function if it uses nightly features unless that function is also marked `#[rustc_const_unstable]`. This prevents proliferation of `#[allow_internal_unstable]` into functions that are not callable in a `const` context on stable.
r? @oli-obk (author of #63770)
cc @Centril
|
|
|
|
This flag opts out of the min-const-fn checks entirely, which is usually
not what we want. The few cases where the flag is still necessary have
been annotated.
|
|
Add method Result::into_ok
Implementation of https://github.com/rust-lang/rfcs/pull/2799
Tracking issue #61695
|
|
|
|
This fixes a bug where after calling pad_integral with appropriate flags, the
fill and alignment flags would be set to '0' and 'Right' and left as such even
after exiting pad_integral, which meant that future calls on the same Formatter
would get incorrect flags reported.
This is quite difficult to observe in practice, as almost all formatting
implementations in practice don't call `Display::fmt` directly, but rather use
`write!` or a similar macro, which means that they cannot observe the effects of
the wrong flags (as `write!` creates a fresh Formatter instance). However, we
include a test case.
|
|
|
|
|
|
|
|
|
|
|
|
krishna-veerareddy:issue-66780-bool-ord-optimization, r=sfackler
Optimize Ord trait implementation for bool
Casting the booleans to `i8`s and converting their difference into `Ordering` generates better assembly than casting them to `u8`s and comparing them.
Fixes #66780
#### Comparison([Godbolt link](https://rust.godbolt.org/z/PjBpvF))
##### Old assembly:
```asm
example::boolean_cmp:
mov ecx, edi
xor ecx, esi
test esi, esi
mov eax, 255
cmove eax, ecx
test edi, edi
cmovne eax, ecx
ret
```
##### New assembly:
```asm
example::boolean_cmp:
mov eax, edi
sub al, sil
ret
```
##### Old LLVM-MCA statistics:
```
Iterations: 100
Instructions: 800
Total Cycles: 234
Total uOps: 1000
Dispatch Width: 6
uOps Per Cycle: 4.27
IPC: 3.42
Block RThroughput: 1.7
```
##### New LLVM-MCA statistics:
```
Iterations: 100
Instructions: 300
Total Cycles: 110
Total uOps: 500
Dispatch Width: 6
uOps Per Cycle: 4.55
IPC: 2.73
Block RThroughput: 1.0
```
|
|
libstd miri tests: avoid warnings
Ignore tests in a way that all the code still gets compiled, to get rid of all the "unused" warnings that otherwise show up when running the test suite in Miri.
|
|
|
|
|
|
|
|
|
|
|
|
These three lines are from c82da7a54b9efb1a0ccbe11de66c71f547bf7db9 in
2015.
They cause problems when applying rustfmt to the codebase, because
reordering wildcard imports can trigger new unused import warnings.
As a minimized example, the following program compiles successfully:
#![deny(unused_imports)]
use std::fmt::Debug;
use std::marker::Send;
pub mod repro {
use std::prelude::v1::*;
use super::*;
pub type D = dyn Debug;
pub type S = dyn Send;
}
pub type S = dyn Send;
but putting it through rustfmt produces a program that fails to compile:
#![deny(unused_imports)]
use std::fmt::Debug;
use std::marker::Send;
pub mod repro {
use super::*;
use std::prelude::v1::*;
pub type D = dyn Debug;
pub type S = dyn Send;
}
pub type S = dyn Send;
The error is:
error: unused import: `std::prelude::v1::*`
--> src/main.rs:8:9
|
8 | use std::prelude::v1::*;
| ^^^^^^^^^^^^^^^^^^^
|
|
Casting the booleans to `i8`s and converting their difference
into `Ordering` generates better assembly than casting them to
`u8`s and comparing them.
|
|
|
|
Many tests are based on tests by Josh Stone <cuviper@gmail.com>
|
|
|
|
Add `cmp::{min_by, min_by_key, max_by, max_by_key}`
This adds the following functions to `core::cmp`:
- `min_by`
- `min_by_key`
- `max_by`
- `max_by_key`
`min_by` and `max_by` are somewhat trivial to implement, but not entirely because `min_by` returns the first value in case the two are equal (and `max_by` the second). `min` and `max` can be implemented in terms of `min_by` and `max_by`, but not as easily the other way around.
To give an example of why I think these functions could be useful: the `Iterator::{min_by, min_by_key, max_by, max_by_key}` methods all currently hard-code the behavior mentioned above which is an ever so small duplication of logic. If we delegate them to `cmp::{min_by, max_by}` methods instead, we get the correct behavior for free. (edit: this is now included in the PR)
I added `min_by_key` / `max_by_key` for consistency's sake but I wouldn't mind removing them. I don't have a particular use case in mind for them, and `min_by` / `max_by` seem to be more useful.
Tracking issue: #64460
|
|
|
|
Override `StepBy::{try_fold, try_rfold}`
Previous PR: https://github.com/rust-lang/rust/pull/51435
The previous PR was closed in favor of https://github.com/rust-lang/rust/pull/51601, which was later reverted. I don't think these implementations will make it harder to specialize `StepBy<Range<_>>` later, so we should be able to land this without any consequences.
This should fix https://github.com/rust-lang/rust/issues/57517 – in my benchmarks `iter` and `iter.step_by(1)` now perform equally well, provided internal iteration is used.
|
|
Add Iterator comparison methods that take a comparison function
This PR adds `Iterator::{cmp_by, partial_cmp_by, eq_by, ne_by, lt_by, le_by, gt_by, ge_by}`. We already have `Iterator::{cmp, partial_cmp, ...}` which are less general (but not any simpler) than the ones I'm proposing here.
I'm submitting this PR now because #61505 has been merged, so this change should not have a noticeable effect on the `Iterator` docs page size.
The diff is quite messy, here's what I changed:
- The logic of `cmp` / `partial_cmp` / `eq` is moved to `cmp_by` / `partial_cmp_by` / `eq_by` respectively, changing `x.cmp(&y)` to `cmp(&x, &y)` in the `cmp` method where `cmp` is the given comparison function (and similar for `partial_cmp_by` and `eq_by`).
- `ne_by` / `lt_by` / `le_by` / `gt_by` / `ge_by` are each implemented in terms of one of the three methods above.
- The existing comparison methods are each forwarded to their `_by` counterpart, passing one of `Ord::cmp` / `PartialOrd::partial_cmp` / `PartialEq::eq` as the comparison function.
The corresponding `_by_key` methods aren't included because they're not as fundamental as the `_by` methods and can easily be implemented in terms of them. Is that reasonable, or would adding the `_by_key` methods be desirable for the sake of completeness?
I didn't add any tests – I couldn't think of any that weren't already covered by our existing tests. Let me know if there's a particular test that would be useful to add.
|
|
|
|
|
|
|
|
Because of a compiler bug that adding `Self: ExactSizeIterator` makes
the compiler forget `Self::Item` is `<I as Iterator>::Item`, we remove
this specialization for now.
|
|
Fix bug in iter::Chain::size_hint
`Chain::size_hint` currently ignores `self.state`, which means that the size hints of the underlying iterators are always combined regardless of the iteration state. This, of course, should only happen when the state is `ChainState::Both`.
|
|
r=scottmcm
Implement `nth_back` for ChunksExactMut
This is a part of #54054.
r? @scottmcm
|
|
|
|
Override Cycle::try_fold
It's not very pretty, but I believe this is the simplest way to correctly implement `Cycle::try_fold`. The following may seem correct:
```rust
loop {
acc = self.iter.try_fold(acc, &mut f)?;
self.iter = self.orig.clone();
}
```
...but this loops infinitely in case `self.orig` is empty, as opposed to returning `acc`. So we first have to fully iterate `self.orig` to check whether it is empty or not, and before _that_, we have to iterate the remaining elements of `self.iter`.
This should always call `self.orig.clone()` the same amount of times as repeated `next()` calls would.
r? @scottmcm
|
|
Add custom nth_back for Chain
Implementation of nth_back for Chain.
Part of #54054
|
|
reduce some test sizes in Miri
|
|
enable flt2dec tests in Miri
With ldexp implemented (thanks to @christianpoveda), we can finally enable these tests in Miri. Well, most of them -- some are just too slow.
|
|
Improve test output
I'm continuing to improve the test output for liballoc and libcore
|
|
|
