| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
Most of the comments are available on the Task structure itself, but this commit
is aimed at making FFI-style usage of Rust tasks a little nicer.
Primarily, this commit enables re-use of tasks across multiple invocations. The
method `run` will no longer unconditionally destroy the task itself. Rather, the
task will be internally re-usable if the closure specified did not fail. Once a
task has failed once it is considered poisoned and it can never be used again.
Along the way I tried to document shortcomings of the current method of tearing
down a task, opening a few issues as well. For now none of the behavior is a
showstopper, but it's useful to acknowledge it. Also along the way I attempted
to remove as much `unsafe` code as possible, opting for safer abstractions.
|
|
Most of the comments are available on the Task structure itself, but this commit
is aimed at making FFI-style usage of Rust tasks a little nicer.
Primarily, this commit enables re-use of tasks across multiple invocations. The
method `run` will no longer unconditionally destroy the task itself. Rather, the
task will be internally re-usable if the closure specified did not fail. Once a
task has failed once it is considered poisoned and it can never be used again.
Along the way I tried to document shortcomings of the current method of tearing
down a task, opening a few issues as well. For now none of the behavior is a
showstopper, but it's useful to acknowledge it. Also along the way I attempted
to remove as much `unsafe` code as possible, opting for safer abstractions.
|
|
This will break code like:
fn f(x: &mut int) {}
let mut a = box 1i;
f(a);
Change it to:
fn f(x: &mut int) {}
let mut a = box 1i;
f(&mut *a);
RFC 33; issue #10504.
[breaking-change]
|
|
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes #6023.
[breaking-change]
|
|
The aim of these changes is not working out a generic bi-endianness architectures support but to allow people develop for little endian MIPS machines (issue #7190).
|
|
|
|
This creates a stability baseline for all crates that we distribute that are not `std`. In general, all library code must start as experimental and progress in stages to become stable.
|
|
This patch consolidates and cleans up the task spawning APIs:
* Removes the problematic `future_result` method from `std::task::TaskBuilder`,
and adds a `try_future` that both spawns the task and returns a future
representing its eventual result (or failure).
* Removes the public `opts` field from `TaskBuilder`, instead adding appropriate
builder methods to configure the task.
* Adds extension traits to libgreen and libnative that add methods to
`TaskBuilder` for spawning the task as a green or native thread.
Previously, there was no way to benefit from the `TaskBuilder` functionality and
also set the scheduler to spawn within.
With this change, all task spawning scenarios are supported through the
`TaskBuilder` interface.
Closes #3725.
[breaking-change]
|
|
|
|
|
|
|
|
The following features have been removed
* box [a, b, c]
* ~[a, b, c]
* box [a, ..N]
* ~[a, ..N]
* ~[T] (as a type)
* deprecated_owned_vector lint
All users of ~[T] should move to using Vec<T> instead.
|
|
|
|
This uncovered some dead code, most notably in middle/liveness.rs, which I think suggests there must be something fishy with that part of the code.
The #[allow(dead_code)] annotations on some of the fields I am not super happy about but as I understand, marker type may disappear at some point.
|
|
|
|
|
|
|
|
|
|
This grows a new option inside of rustdoc to add the ability to submit examples
to an external website. If the `--markdown-playground-url` command line option
or crate doc attribute `html_playground_url` is present, then examples will have
a button on hover to submit the code to the playground specified.
This commit enables submission of example code to play.rust-lang.org. The code
submitted is that which is tested by rustdoc, not necessarily the exact code
shown in the example.
Closes #14654
|
|
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
|
|
According to Rust's style guide acronyms in type names should be
CamelCase.
[breaking-change]
|
|
This commit shuffles around some of the `rand` code, along with some
reorganization. The new state of the world is as follows:
* The librand crate now only depends on libcore. This interface is experimental.
* The standard library has a new module, `std::rand`. This interface will
eventually become stable.
Unfortunately, this entailed more of a breaking change than just shuffling some
names around. The following breaking changes were made to the rand library:
* Rng::gen_vec() was removed. This has been replaced with Rng::gen_iter() which
will return an infinite stream of random values. Previous behavior can be
regained with `rng.gen_iter().take(n).collect()`
* Rng::gen_ascii_str() was removed. This has been replaced with
Rng::gen_ascii_chars() which will return an infinite stream of random ascii
characters. Similarly to gen_iter(), previous behavior can be emulated with
`rng.gen_ascii_chars().take(n).collect()`
* {IsaacRng, Isaac64Rng, XorShiftRng}::new() have all been removed. These all
relied on being able to use an OSRng for seeding, but this is no longer
available in librand (where these types are defined). To retain the same
functionality, these types now implement the `Rand` trait so they can be
generated with a random seed from another random number generator. This allows
the stdlib to use an OSRng to create seeded instances of these RNGs.
* Rand implementations for `Box<T>` and `@T` were removed. These seemed to be
pretty rare in the codebase, and it allows for librand to not depend on
liballoc. Additionally, other pointer types like Rc<T> and Arc<T> were not
supported. If this is undesirable, librand can depend on liballoc and regain
these implementations.
* The WeightedChoice structure is no longer built with a `Vec<Weighted<T>>`,
but rather a `&mut [Weighted<T>]`. This means that the WeightedChoice
structure now has a lifetime associated with it.
* The `sample` method on `Rng` has been moved to a top-level function in the
`rand` module due to its dependence on `Vec`.
cc #13851
[breaking-change]
|
|
Because IPv4 address conversion doesn't consider big-endian target, I add functions to handle that.
These function names may need to be changed, but I can't come up with a good one.
|
|
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes #12019
[breaking-change]
|
|
|
|
The span on a inner doc-comment would point to the next token, e.g. the span for the `a` line points to the `b` line, and the span of `b` points to the `fn`.
```rust
//! a
//! b
fn bar() {}
```
|
|
|
|
|
|
|
|
The new documentation site has shorter urls, gzip'd content, and index.html
redirecting functionality.
|
|
|
|
|
|
|
|
This plugs a leak where resolve was treating enums defined in parent modules as
in-scope for all children modules when resolving a pattern identifier. This
eliminates the code path in resolve entirely.
If this breaks any existing code, then it indicates that the variants need to be
explicitly imported into the module.
Closes #14221
[breaking-change]
|
|
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
|
|
Closes #14231 (mk: Don't run benchmarks with `make check`)
Closes #14215 (std: Modify TempDir to not fail on drop. Closes #12628)
Closes #14211 (rustdoc: functions in ffi blocks are unsafe)
Closes #14210 (Make Vec.truncate() resilient against failure in Drop)
Closes #14208 (Make `from_bits` in `bitflags!` safe; add `from_bits_truncate`)
Closes #14206 (Register new snapshots)
Closes #14205 (use sched_yield on linux and freebsd)
Closes #14204 (Add a crate for missing stubs from libcore)
Closes #14203 (shootout-mandelbrot: Either 10-20% or 80-100% improvement.)
Closes #14202 (Add flow-graph visualization (via graphviz) to rustc)
Closes #14201 (Render not_found with an absolute path to the rust stylesheet)
Closes #14200 (std cleanup)
Closes #14189 (Implement cell::clone_ref)
|
|
|
|
|
|
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
|
|
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
|
|
|
|
|
|
These were mistakenly not updated as part of the removal of the Send bound by
default on procedures.
cc #13629
|
|
|
|
Closes #13546 (workcache: Don't assume gcc exists on all platforms)
Closes #13545 (std: Remove pub use globs)
Closes #13530 (test: Un-ignore smallest-hello-world.rs)
Closes #13529 (std: Un-ignore some float tests on windows)
Closes #13528 (green: Add a helper macro for booting libgreen)
Closes #13526 (Remove RUST_LOG="::help" from the docs)
Closes #13524 (dist: Make Windows installer uninstall first. Closes #9563)
Closes #13521 (Change AUTHORS section in the man pages)
Closes #13519 (Update GitHub's Rust projects page.)
Closes #13518 (mk: Change windows to install from stage2)
Closes #13516 (liburl doc: insert missing hyphen)
Closes #13514 (rustdoc: Better sorting criteria for searching.)
Closes #13512 (native: Fix a race in select())
Closes #13506 (Use the unsigned integer types for bitwise intrinsics.)
Closes #13502 (Add a default impl for Set::is_superset)
|
|
This one-liner should help booting libgreen with librustuv without having to
worry about all the fiddly bits of argc/argv and whatnot.
|
|
|
|
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
Sender::try_send(t: T) -> bool
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
SyncSender::try_send(t: T) -> TrySendResult<T>
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
SyncSender::send_opt(t: T) -> Option<T>
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
Receiver::try_recv(t: T) -> TryRecvResult<T>
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes #11527
|
|
|
