| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
|
|
The rtio interface is a thin low-level interface over the I/O subsystems, and
the `Path` type is a little too high-level for this interface.
|
|
|
|
|
|
A number of functions/methods have been moved or renamed to align
better with rust standard conventions.
std::reflect::MovePtrAdaptor => MovePtrAdaptor::new
debug::reflect::MovePtrAdaptor => MovePtrAdaptor::new
std::repr::ReprVisitor => ReprVisitor::new
debug::repr::ReprVisitor => ReprVisitor::new
rustuv::homing::HomingIO.go_to_IO_home => go_to_io_home
[breaking-change]
|
|
Fix issue #13933 in a few files. A more complete fix would require core::raw::MutSlice.
|
|
When spawning a process, stdio file descriptors can be configured to be ignored,
which basically means that they'll be closed. Currently this is done by
literally closing the file descriptors in the child, but this can have adverse
side effects if the child process then opens a new file descriptor, assigning it
to a stdio number.
To work around the problems of the child, this commit alters the process
spawning code to map stdio fds to /dev/null on unix (and a similar equivalent on
windows) when they are specified as being ignored. This should allow spawned
programs to have more expected behavior when opening new files.
Closes #14456
|
|
The IO libraries casted self to mut so they can pass it to seek(SEEK_CUR, 0).
Fix this by introducing a private seek function that takes &self
- of course one should be careful with it if he lacks an
exclusive reference to self.
|
|
Because IPv4 address conversion doesn't consider big-endian target, I add functions to handle that.
These function names may need to be changed, but I can't come up with a good one.
|
|
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes #12019
[breaking-change]
|
|
When spawning a process, stdio file descriptors can be configured to be ignored,
which basically means that they'll be closed. Currently this is done by
literally closing the file descriptors in the child, but this can have adverse
side effects if the child process then opens a new file descriptor, assigning it
to a stdio number.
To work around the problems of the child, this commit alters the process
spawning code to map stdio fds to /dev/null on unix (and a similar equivalent on
windows) when they are specified as being ignored. This should allow spawned
programs to have more expected behavior when opening new files.
Closes #14456
|
|
[breaking-change]
|
|
|
|
|
|
[breaking-change]
|
|
* All of the *_val functions have gone from #[unstable] to #[stable]
* The overwrite and zeroed functions have gone from #[unstable] to #[stable]
* The uninit function is now deprecated, replaced by its stable counterpart,
uninitialized
[breaking-change]
|
|
The span on a inner doc-comment would point to the next token, e.g. the span for the `a` line points to the `b` line, and the span of `b` points to the `fn`.
```rust
//! a
//! b
fn bar() {}
```
|
|
|
|
[breaking-change]
|
|
|
|
|
|
The new documentation site has shorter urls, gzip'd content, and index.html
redirecting functionality.
|
|
This type can be built with `Arc<Unsafe<T>>` now that liballoc exists.
|
|
|
|
Excluding the functions inherited from the cast module last week (with marked
stability levels), these functions received the following treatment.
* size_of - this method has become #[stable]
* nonzero_size_of/nonzero_size_of_val - these methods have been removed
* min_align_of - this method is now #[stable]
* pref_align_of - this method has been renamed without the
`pref_` prefix, and it is the "default alignment" now. This decision is in line
with what clang does (see url linked in comment on function). This function
is now #[stable].
* init - renamed to zeroed and marked #[stable]
* uninit - marked #[stable]
* move_val_init - renamed to overwrite and marked #[stable]
* {from,to}_{be,le}{16,32,64} - all functions marked #[stable]
* swap/replace/drop - marked #[stable]
* size_of_val/min_align_of_val/align_of_val - these functions are marked
#[unstable], but will continue to exist in some form. Concerns have been
raised about their `_val` prefix.
[breaking-change]
|
|
|
|
Previously, the `from_bits` function in the `std::bitflags::bitflags`
macro was marked as unsafe, as it did not check that the bits being
converted actually corresponded to flags.
This patch changes the function to check against the full set of
possible flags and return an `Option` which is `None` if a non-flag bit
is set. It also adds a `from_bits_truncate` function which simply zeros
any bits not corresponding to a flag.
This addresses the concern raised in https://github.com/mozilla/rust/pull/13897
|
|
The existing APIs for spawning processes took strings for the command
and arguments, but the underlying system may not impose utf8 encoding,
so this is overly limiting.
The assumption we actually want to make is just that the command and
arguments are viewable as [u8] slices with no interior NULLs, i.e., as
CStrings. The ToCStr trait is a handy bound for types that meet this
requirement (such as &str and Path).
However, since the commands and arguments are often a mixture of
strings and paths, it would be inconvenient to take a slice with a
single T: ToCStr bound. So this patch revamps the process creation API
to instead use a builder-style interface, called `Command`, allowing
arguments to be added one at a time with differing ToCStr
implementations for each.
The initial cut of the builder API has some drawbacks that can be
addressed once issue #13851 (libstd as a facade) is closed. These are
detailed as FIXMEs.
Closes #11650.
[breaking-change]
|
|
This implements set_timeout() for std::io::Process which will affect wait()
operations on the process. This follows the same pattern as the rest of the
timeouts emerging in std::io::net.
The implementation was super easy for everything except libnative on unix
(backwards from usual!), which required a good bit of signal handling. There's a
doc comment explaining the strategy in libnative. Internally, this also required
refactoring the "helper thread" implementation used by libnative to allow for an
extra helper thread (not just the timer).
This is a breaking change in terms of the io::Process API. It is now possible
for wait() to fail, and subsequently wait_with_output(). These two functions now
return IoResult<T> due to the fact that they can time out.
Additionally, the wait_with_output() function has moved from taking `&mut self`
to taking `self`. If a timeout occurs while waiting with output, the semantics
are undesirable in almost all cases if attempting to re-wait on the process.
Equivalent functionality can still be achieved by dealing with the output
handles manually.
[breaking-change]
cc #13523
|
|
Added a run-pass test to ensure that processes can be correctly spawned
using non-ASCII arguments, working directory, and environment variables.
It also tests Unicode support of os::env_as_bytes.
An additional assertion was added to the test for make_command_line to
verify it handles Unicode correctly.
|
|
Previously, make_command_line iterates over each u8 in the string and
then appends them as chars, so any non-ASCII string will get horribly
mangled by this function. This fix should allow Unicode arguments to
work correctly in native::io::process::spawn.
|
|
Changed libnative to use CreateProcessW instead of CreateProcessA. In
addition, the lpEnvironment parameter now uses Unicode.
Added a helper function os::win32::as_mut_utf16_p, which does basically
the same thing as os::win32::as_utf16_p except the pointer is mutable.
|
|
The `FileStat` struct contained a `path` field, which was filled by the
`stat` and `lstat` function. Since this field isn't in fact returned by
the operating system (it was copied from the paths passed to the
functions) it was removed, as in the `fstat` case we aren't working with
a `Path`, but directly with a fd.
If your code used the `path` field of `FileStat` you will now have to
manually store the path passed to `stat` along with the returned struct.
[breaking-change]
|
|
|
|
This addresses #12842 by offering fallback implementations for functions that aren't available.
In this case, as Windows XP simply doesn't support symbolic links at all, the fallbacks simply return an error code indicating that the function hasn't been implemented. This should allow programs written in Rust to run under XP while still offering full support for symbolic links under newer versions of Windows with the same binary, but due to LLVM using stderror_s(), which isn't available in msvcrt.dll in XP, rustc itself will not.
The fallback implementation is as follows:
Calling the function instead calls to a mutable function pointer. This in and of itself would not constitute a performance hit because DLL calls are implemented in a similar manner (see Import Address Table). The function pointer initially points to a thunk which tries to get the address of the associated function and write it back to the function pointer. If it fails to find the function, it instead writes the address to a fallback. As this operation is idempotent, reading and writing the pointer simply needs to be atomic. Subsequent calls to the function should be as fast as any other DLL call, as the pointer will then point directly to either the correct function or a fallback.
|
|
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
|
|
This module only contains wrappers for malloc and realloc with
out-of-memory checks.
|
|
|
|
API Changes:
- GetAddrInfoRequest::run() returns Result<Vec<..>, ..>
- Process::spawn() returns Result(.., Vec<..>), ..>
|
|
Change from_buf_raw() to return a Vec<T> instead of a ~[T]. As such, it
belongs in vec, in the newly-created vec::raw module.
|
|
|
|
This is the last remaining networkig object to implement timeouts for. This
takes advantage of the CancelIo function and the already existing asynchronous
I/O functionality of pipes.
|
|
This commit has an implementation of the previous commit's timeout interface for
I/O objects on unix platforms. For implementation details, see the large comment
at the end of libnative/io/net.rs which talks about the general strategy taken.
Thankfully, all of these implementations can share code because they're
performing all the same operations.
This commit does not implement timeouts for named pipes on windows, only tcp/udp
objects on windows (which are quite similar to their unix equivalents).
|
|
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
|
|
|
|
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
|
|
The `std::bitflags::bitflags!` macro did not provide support for
adding attributes to the generates structure, due to limitations in
the parser for macros. This patch works around the parser limitations
by requiring a `flags` keyword in the `bitflags!` invocations:
bitflags!(
#[deriving(Hash)]
#[doc="Three flags"]
flags Flags: u32 {
FlagA = 0x00000001,
FlagB = 0x00000010,
FlagC = 0x00000100
}
)
The intent of `std::bitflags` is to allow building type-safe wrappers
around C-style flags APIs. But in addition to construction these flags
from the Rust side, we need a way to convert them from the C
side. This patch adds a `from_bits` function, which is unsafe since
the bits in question may not represent a valid combination of flags.
Finally, this patch changes `std::io::FilePermissions` from an exposed
`u32` representation to a typesafe representation (that only allows valid
flag combinations) using the `std::bitflags`.
Closes #6085.
|
|
This patch changes `std::io::FilePermissions` from an exposed `u32`
representation to a typesafe representation (that only allows valid
flag combinations) using the `std::bitflags`, thus ensuring a greater
degree of safety on the Rust side.
Despite the change to the type, most code should continue to work
as-is, sincde the new type provides bit operations in the style of C
flags. To get at the underlying integer representation, use the `bits`
method; to (unsafely) convert to `FilePermissions`, use
`FilePermissions::from_bits`.
Closes #6085.
[breaking-change]
|
|
Turning a `&T` into an `&mut T` carries a large risk of undefined
behaviour, and needs to be done very very carefully. Providing a
convenience function for exactly this task is a bad idea, just tempting
people into doing the wrong thing.
The right thing is to use types like `Cell`, `RefCell` or `Unsafe`.
For memory safety, Rust has that guarantee that `&mut` pointers do not
alias with any other pointer, that is, if you have a `&mut T` then that
is the only usable pointer to that `T`. This allows Rust to assume that
writes through a `&mut T` do not affect the values of any other `&` or
`&mut` references. `&` pointers have no guarantees about aliasing or
not, so it's entirely possible for the same pointer to be passed into
both arguments of a function like
fn foo(x: &int, y: &int) { ... }
Converting either of `x` or `y` to a `&mut` pointer and modifying it
would affect the other value: invalid behaviour.
(Similarly, it's undefined behaviour to modify the value of an immutable
local, like `let x = 1;`.)
At a low-level, the *only* safe way to obtain an `&mut` out of a `&` is
using the `Unsafe` type (there are higher level wrappers around it, like
`Cell`, `RefCell`, `Mutex` etc.). The `Unsafe` type is registered with
the compiler so that it can reason a little about these `&` to `&mut`
casts, but it is still up to the user to ensure that the `&mut`s
obtained out of an `Unsafe` never alias.
(Note that *any* conversion from `&` to `&mut` can be invalid, including
a plain `transmute`, or casting `&T` -> `*T` -> `*mut T` -> `&mut T`.)
[breaking-change]
|
