| Age | Commit message (Collapse) | Author | Lines |
|---|
|
|
|
This commit removes superfluous to_string calls from various places
|
|
|
|
We're going to have more modules under lint, and the paths get unwieldy. We
also plan to have lints run at multiple points in the compilation pipeline.
|
|
The aim of these changes is not working out a generic bi-endianness architectures support but to allow people develop for little endian MIPS machines (issue #7190).
|
|
|
|
|
|
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes #13540.
|
|
Closes #8142.
This is not the semantics we want long-term. You can continue to use
`#[unsafe_destructor]`, but you'll need to add
`#![feature(unsafe_destructor)]` to the crate attributes.
[breaking-change]
|
|
This commit makes several changes to the stability index infrastructure:
* Stability levels are now inherited lexically, i.e., each item's
stability level becomes the default for any nested items.
* The computed stability level for an item is stored as part of the
metadata. When using an item from an external crate, this data is
looked up and cached.
* The stability lint works from the computed stability level, rather
than manual stability attribute annotations. However, the lint still
checks only a limited set of item uses (e.g., it does not check every
component of a path on import). This will be addressed in a later PR,
as part of issue #8962.
* The stability lint only applies to items originating from external
crates, since the stability index is intended as a promise to
downstream crates.
* The "experimental" lint is now _allow_ by default. This is because
almost all existing crates have been marked "experimental", pending
library stabilization. With inheritance in place, this would generate
a massive explosion of warnings for every Rust program.
The lint should be changed back to deny-by-default after library
stabilization is complete.
* The "deprecated" lint still warns by default.
The net result: we can begin tracking stability index for the standard
libraries as we stabilize, without impacting most clients.
Closes #13540.
|
|
|
|
|
|
only known post-monomorphization, and report `transmute` errors before
the code is generated for that `transmute`.
This can break code that looked like:
unsafe fn f<T>(x: T) {
let y: int = transmute(x);
}
Change such code to take a type parameter that has the same size as the
type being transmuted to.
Closes #12898.
[breaking-change]
|
|
Adds the option -Zsave-analysis which will dump the results of syntax and type checking into CSV files. These can be interpreted by tools such as DXR to provide semantic information about Rust programs for code search, cross-reference, etc.
Authored by Nick Cameron and Peter Elmers (@pelmers; including enums, type parameters/generics).
|
|
This commit is the final step in the libstd facade, #13851. The purpose of this
commit is to move libsync underneath the standard library, behind the facade.
This will allow core primitives like channels, queues, and atomics to all live
in the same location.
There were a few notable changes and a few breaking changes as part of this
movement:
* The `Vec` and `String` types are reexported at the top level of libcollections
* The `unreachable!()` macro was copied to libcore
* The `std::rt::thread` module was moved to librustrt, but it is still
reexported at the same location.
* The `std::comm` module was moved to libsync
* The `sync::comm` module was moved under `sync::comm`, and renamed to `duplex`.
It is now a private module with types/functions being reexported under
`sync::comm`. This is a breaking change for any existing users of duplex
streams.
* All concurrent queues/deques were moved directly under libsync. They are also
all marked with #![experimental] for now if they are public.
* The `task_pool` and `future` modules no longer live in libsync, but rather
live under `std::sync`. They will forever live at this location, but they may
move to libsync if the `std::task` module moves as well.
[breaking-change]
|
|
|
|
Do this to avoid warnings on post-stage0 builds.
|
|
See RFC 22.
[breaking-change]
|
|
|
|
|
|
This commit moves reflection (as well as the {:?} format modifier) to a new
libdebug crate, all of which is marked experimental.
This is a breaking change because it now requires the debug crate to be
explicitly linked if the :? format qualifier is used. This means that any code
using this feature will have to add `extern crate debug;` to the top of the
crate. Any code relying on reflection will also need to do this.
Closes #12019
[breaking-change]
|
|
[breaking-change]
|
|
The new documentation site has shorter urls, gzip'd content, and index.html
redirecting functionality.
|
|
This commit is part of the ongoing libstd facade efforts (cc #13851). The
compiler now recognizes some language items as "extern { fn foo(...); }" and
will automatically perform the following actions:
1. The foreign function has a pre-defined name.
2. The crate and downstream crates can only be built as rlibs until a crate
defines the lang item itself.
3. The actual lang item has a pre-defined name.
This is essentially nicer compiler support for the hokey
core-depends-on-std-failure scheme today, but it is implemented the same way.
The details are a little more hidden under the covers.
In addition to failure, this commit promotes the eh_personality and
rust_stack_exhausted functions to official lang items. The compiler can generate
calls to these functions, causing linkage errors if they are left undefined. The
checking for these items is not as precise as it could be. Crates compiling with
`-Z no-landing-pads` will not need the eh_personality lang item, and crates
compiling with no split stacks won't need the stack exhausted lang item. For
ease, however, these items are checked for presence in all final outputs of the
compiler.
It is quite easy to define dummy versions of the functions necessary:
#[lang = "stack_exhausted"]
extern fn stack_exhausted() { /* ... */ }
#[lang = "eh_personality"]
extern fn eh_personality() { /* ... */ }
cc #11922, rust_stack_exhausted is now a lang item
cc #13851, libcollections is blocked on eh_personality becoming weak
|
|
|
|
Passing `--pretty flowgraph=<NODEID>` makes rustc print a control flow graph.
In pratice, you will also need to pass the additional option:
`-o <FILE>` to emit output to a `.dot` file for graphviz.
(You can only print the flow-graph for a particular block in the AST.)
----
An interesting implementation detail is the way the code puts both the
node index (`cfg::CFGIndex`) and a reference to the payload
(`cfg::CFGNode`) into the single `Node` type that is used for
labelling and walking the graph. I had once mistakenly thought that I
only wanted the `cfg::CFGNode`, but for labelling, you really want the
cfg index too, rather than e.g. trying to use the `ast::NodeId` as the
label (which breaks down e.g. due to `ast::DUMMY_NODE_ID`).
----
As a drive-by fix, I had to fix `rustc::middle::cfg::construct`
interface to reflect changes that have happened on the master branch
while I was getting this integrated into the compiler. (The next
commit actually adds tests of the `--pretty flowgraph` functionality,
so that should ensure that the `rustc::middle::cfg` code does not go
stale again.)
|
|
|
|
|
|
The goal of this refactoring is to make the rustc driver code easier to understand and use. Since this is as close to an API as we have, I think it is important that it is nice. On getting stuck in, I found that there wasn't as much to change as I'd hoped to make the stage... fns easier to use by tools.
This patch only moves code around - mostly just moving code to different files, but a few extracted method refactorings too. To summarise the changes: I added driver::config which handles everything about configuring the compiler. driver::session now just defines and builds session objects. I moved driver code from librustc/lib.rs to librustc/driver/mod.rs so all the code is one place. I extracted methods to make emulating the compiler without being the compiler a little easier. Within the driver directory, I moved code around to more logically fit in the modules.
|
|
|
|
|
|
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
|
|
|
|
Currently, rustc requires that a linkage be a product of 100% rlibs or 100%
dylibs. This is to satisfy the requirement that each object appear at most once
in the final output products. This is a bit limiting, and the upcoming libcore
library cannot exist as a dylib, so these rules must change.
The goal of this commit is to enable *some* use cases for mixing rlibs and
dylibs, primarily libcore's use case. It is not targeted at allowing an
exhaustive number of linkage flavors.
There is a new dependency_format module in rustc which calculates what format
each upstream library should be linked as in each output type of the current
unit of compilation. The module itself contains many gory details about what's
going on here.
cc #10729
|
|
|
|
|
|
moves computation. ExprUseVisitor is a visitor that walks the AST for a
function and calls a delegate to inform it where borrows, copies, and moves
occur.
In this patch, I rewrite the gather_loans visitor to use ExprUseVisitor, but in
future patches, I think we could rewrite regionck, check_loans, and possibly
other passes to use it as well. This would refactor the repeated code between
those places that tries to determine where copies/moves/etc occur.
|
|
The constructor for `TaskBuilder` is being changed to an associated
function called `new` for consistency with the rest of the standard
library.
Closes #13666
[breaking-change]
|
|
|
|
|
|
Closes #13549
|
|
This is required in rustc to resolve symlinks for utilities such as the sysroot
and the rpath values which are encoded into binaries.
|
|
|
|
|
|
`Reader`, `Writer`, `MemReader`, `MemWriter`, and `MultiWriter` now work with `Vec<u8>` instead of `~[u8]`. This does introduce some extra copies since `from_utf8_owned` isn't usable anymore, but I think that can't be helped until `~str`'s representation changes.
|
|
There's a little more allocation here and there now since
from_utf8_owned can't be used with Vec.
|
|
Rebasing of #12526 with a very obscure bug fixed on windows.
|
|
|
|
|
|
This also changes some of the download links in the documentation
to 'nightly'.
|
