| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Conflicts:
src/test/compile-fail/borrowck-move-out-of-overloaded-auto-deref.rs
src/test/compile-fail/issue-2590.rs
src/test/compile-fail/lint-stability.rs
src/test/compile-fail/slice-mut-2.rs
src/test/compile-fail/std-uncopyable-atomics.rs
|
|
This adds the int_uint feature to *every* library, whether or not it
needs it.
|
|
This gets rid of the 'experimental' level, removes the non-staged_api
case (i.e. stability levels for out-of-tree crates), and lets the
staged_api attributes use 'unstable' and 'deprecated' lints.
This makes the transition period to the full feature staging design
a bit nicer.
|
|
Conflicts:
src/compiletest/compiletest.rs
src/libcollections/lib.rs
src/libserialize/lib.rs
src/libsyntax/feature_gate.rs
|
|
To avoid using the feauture, change uses of `box <expr>` to
`Box::new(<expr>)` alternative, as noted by the feature gate message.
(Note that box patterns have no analogous trivial replacement, at
least not in general; you need to revise the code to do a partial
match, deref, and then the rest of the match.)
[breaking-change]
|
|
This partially implements the feature staging described in the
[release channel RFC][rc]. It does not yet fully conform to the RFC as
written, but does accomplish its goals sufficiently for the 1.0 alpha
release.
It has three primary user-visible effects:
* On the nightly channel, use of unstable APIs generates a warning.
* On the beta channel, use of unstable APIs generates a warning.
* On the beta channel, use of feature gates generates a warning.
Code that does not trigger these warnings is considered 'stable',
modulo pre-1.0 bugs.
Disabling the warnings for unstable APIs continues to be done in the
existing (i.e. old) style, via `#[allow(...)]`, not that specified in
the RFC. I deem this marginally acceptable since any code that must do
this is not using the stable dialect of Rust.
Use of feature gates is itself gated with the new 'unstable_features'
lint, on nightly set to 'allow', and on beta 'warn'.
The attribute scheme used here corresponds to an older version of the
RFC, with the `#[staged_api]` crate attribute toggling the staging
behavior of the stability attributes, but the user impact is only
in-tree so I'm not concerned about having to make design changes later
(and I may ultimately prefer the scheme here after all, with the
`#[staged_api]` crate attribute).
Since the Rust codebase itself makes use of unstable features the
compiler and build system to a midly elaborate dance to allow it to
bootstrap while disobeying these lints (which would otherwise be
errors because Rust builds with `-D warnings`).
This patch includes one significant hack that causes a
regression. Because the `format_args!` macro emits calls to unstable
APIs it would trigger the lint. I added a hack to the lint to make it
not trigger, but this in turn causes arguments to `println!` not to be
checked for feature gates. I don't presently understand macro
expansion well enough to fix. This is bug #20661.
Closes #16678
[rc]: https://github.com/rust-lang/rfcs/blob/master/text/0507-release-channels.md
|
|
This commit takes a first pass at stabilizing `std::thread`:
* It removes the `detach` method in favor of two constructors -- `spawn`
for detached threads, `scoped` for "scoped" (i.e., must-join)
threads. This addresses some of the surprise/frustrating debug
sessions with the previous API, in which `spawn` produced a guard that
on destruction joined the thread (unless `detach` was called).
The reason to have the division in part is that `Send` will soon not
imply `'static`, which means that `scoped` thread creation can take a
closure over *shared stack data* of the parent thread. On the other
hand, this means that the parent must not pop the relevant stack
frames while the child thread is running. The `JoinGuard` is used to
prevent this from happening by joining on drop (if you have not
already explicitly `join`ed.) The APIs around `scoped` are
future-proofed for the `Send` changes by taking an additional lifetime
parameter. With the current definition of `Send`, this is forced to be
`'static`, but when `Send` changes these APIs will gain their full
flexibility immediately.
Threads that are `spawn`ed, on the other hand, are detached from the
start and do not yield an RAII guard.
The hope is that, by making `scoped` an explicit opt-in with a very
suggestive name, it will be drastically less likely to be caught by a
surprising deadlock due to an implicit join at the end of a scope.
* The module itself is marked stable.
* Existing methods other than `spawn` and `scoped` are marked stable.
The migration path is:
```rust
Thread::spawn(f).detached()
```
becomes
```rust
Thread::spawn(f)
```
while
```rust
let res = Thread::spawn(f);
res.join()
```
becomes
```rust
let res = Thread::scoped(f);
res.join()
```
[breaking-change]
|
|
There's been some debate over the precise form that these APIs should take, and
they've undergone some changes recently, so these APIs are going to be left
unstable for now to be fleshed out during the next release cycle.
|
|
Conflicts:
src/librbml/lib.rs
src/libserialize/json_stage0.rs
src/libserialize/serialize_stage0.rs
src/libsyntax/ast.rs
src/libsyntax/ext/deriving/generic/mod.rs
src/libsyntax/parse/token.rs
|
|
|
|
fmt::Show is for debugging, and can and should be implemented for
all public types. This trait is used with `{:?}` syntax. There still
exists #[derive(Show)].
fmt::String is for types that faithfully be represented as a String.
Because of this, there is no way to derive fmt::String, all
implementations must be purposeful. It is used by the default format
syntax, `{}`.
This will break most instances of `{}`, since that now requires the type
to impl fmt::String. In most cases, replacing `{}` with `{:?}` is the
correct fix. Types that were being printed specifically for users should
receive a fmt::String implementation to fix this.
Part of #20013
[breaking-change]
|
|
|
|
|
|
In the future we want to support
#[macro_use(foo, bar)]
mod macros;
but it's not an essential part of macro reform. Reserve the syntax for now.
|
|
In preparation for the rename.
|
|
|
|
|
|
|
|
Conflicts:
src/test/run-pass/issue-15734.rs
src/test/run-pass/issue-3743.rs
|
|
because of the backwards compatibility feature gate.)
This is a [breaking-change]. The new rules require that, for an impl of a trait defined
in some other crate, two conditions must hold:
1. Some type must be local.
2. Every type parameter must appear "under" some local type.
Here are some examples that are legal:
```rust
struct MyStruct<T> { ... }
// Here `T` appears "under' `MyStruct`.
impl<T> Clone for MyStruct<T> { }
// Here `T` appears "under' `MyStruct` as well. Note that it also appears
// elsewhere.
impl<T> Iterator<T> for MyStruct<T> { }
```
Here is an illegal example:
```rust
// Here `U` does not appear "under" `MyStruct` or any other local type.
// We call `U` "uncovered".
impl<T,U> Iterator<U> for MyStruct<T> { }
```
There are a couple of ways to rewrite this last example so that it is
legal:
1. In some cases, the uncovered type parameter (here, `U`) should be converted
into an associated type. This is however a non-local change that requires access
to the original trait. Also, associated types are not fully baked.
2. Add `U` as a type parameter of `MyStruct`:
```rust
struct MyStruct<T,U> { ... }
impl<T,U> Iterator<U> for MyStruct<T,U> { }
```
3. Create a newtype wrapper for `U`
```rust
impl<T,U> Iterator<Wrapper<U>> for MyStruct<T,U> { }
```
Because associated types are not fully baked, which in the case of the
`Hash` trait makes adhering to this rule impossible, you can
temporarily disable this rule in your crate by using
`#![feature(old_orphan_check)]`. Note that the `old_orphan_check`
feature will be removed before 1.0 is released.
|
|
This commit is an implementation of [RFC 526][rfc] which is a change to alter
the definition of the old `fmt::FormatWriter`. The new trait, renamed to
`Writer`, now only exposes one method `write_str` in order to guarantee that all
implementations of the formatting traits can only produce valid Unicode.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0526-fmt-text-writer.md
One of the primary improvements of this patch is the performance of the
`.to_string()` method by avoiding an almost-always redundant UTF-8 check. This
is a breaking change due to the renaming of the trait as well as the loss of the
`write` method, but migration paths should be relatively easy:
* All usage of `write` should move to `write_str`. If truly binary data was
being written in an implementation of `Show`, then it will need to use a
different trait or an altogether different code path.
* All usage of `write!` should continue to work as-is with no modifications.
* All usage of `Show` where implementations just delegate to another should
continue to work as-is.
[breaking-change]
Closes #20352
|
|
closes #20340
|
|
This commit adds support for the compiler to distinguish between different forms
of lookup paths in the compiler itself. Issue #19767 has some background on this
topic, as well as some sample bugs which can occur if these lookup paths are not
separated.
This commits extends the existing command line flag `-L` with the same trailing
syntax as the `-l` flag. Each argument to `-L` can now have a trailing `:all`,
`:native`, `:crate`, or `:dependency`. This suffix indicates what form of lookup
path the compiler should add the argument to. The `dependency` lookup path is
used when looking up crate dependencies, the `crate` lookup path is used when
looking for immediate dependencies (`extern crate` statements), and the `native`
lookup path is used for probing for native libraries to insert into rlibs. Paths
with `all` are used for all of these purposes (the default).
The default compiler lookup path (the rustlib libdir) is by default added to all
of these paths. Additionally, the `RUST_PATH` lookup path is added to all of
these paths.
Closes #19767
|
|
This commit completes the deprecation story for the in-tree serialization
library. The compiler will now emit a warning whenever it encounters
`deriving(Encodable)` or `deriving(Decodable)`, and the library itself is now
marked `#[unstable]` for when feature staging is enabled.
All users of serialization can migrate to the `rustc-serialize` crate on
crates.io which provides the exact same interface as the libserialize library
in-tree. The new deriving modes are named `RustcEncodable` and `RustcDecodable`
and require `extern crate "rustc-serialize" as rustc_serialize` at the crate
root in order to expand correctly.
To migrate all crates, add the following to your `Cargo.toml`:
[dependencies]
rustc-serialize = "0.1.1"
And then add the following to your crate root:
extern crate "rustc-serialize" as rustc_serialize;
Finally, rename `Encodable` and `Decodable` deriving modes to `RustcEncodable`
and `RustcDecodable`.
[breaking-change]
|
|
Remove most of the public reexports mentioned in #19253
These are all leftovers from the enum namespacing transition
In particular:
* src/libstd/num/strconv.rs
* ExponentFormat
* SignificantDigits
* SignFormat
* src/libstd/path/windows.rs
* PathPrefix
* src/libstd/sys/windows/timer.rs
* Req
* src/libcollections/str.rs
* MaybeOwned
* src/libstd/collections/hash/map.rs
* Entry
* src/libstd/collections/hash/table.rs
* BucketState
* src/libstd/dynamic_lib.rs
* Rtld
* src/libstd/io/net/ip.rs
* IpAddr
* src/libstd/os.rs
* MemoryMapKind
* MapOption
* MapError
* src/libstd/sys/common/net.rs
* SocketStatus
* InAddr
* src/libstd/sys/unix/timer.rs
* Req
[breaking-change]
|
|
This commit shuffles around some CLI flags of the compiler to some more stable
locations with some renamings. The changes made were:
* The `-v` flag has been repurposes as the "verbose" flag. The version flag has
been renamed to `-V`.
* The `-h` screen has been split into two parts. Most top-level options (not
all) show with `-h`, and the remaining options (generally obscure) can be
shown with `--help -v` which is a "verbose help screen"
* The `-V` flag (version flag now) has lost its argument as it is now requested
with `rustc -vV` "verbose version".
* The `--emit` option has had its `ir` and `bc` variants renamed to `llvm-ir`
and `llvm-bc` to emphasize that they are LLVM's IR/bytecode.
* The `--emit` option has grown a new variant, `dep-info`, which subsumes the
`--dep-info` CLI argument. The `--dep-info` flag is now deprecated.
* The `--parse-only`, `--no-trans`, `--no-analysis`, and `--pretty` flags have
moved behind the `-Z` family of flags.
* The `--debuginfo` and `--opt-level` flags were moved behind the top-level `-C`
flag.
* The `--print-file-name` and `--print-crate-name` flags were moved behind one
global `--print` flag which now accepts one of `crate-name`, `file-names`, or
`sysroot`. This global `--print` flag is intended to serve as a mechanism for
learning various metadata about the compiler itself.
* The top-level `--pretty` flag was moved to a number of `-Z` options.
No warnings are currently enabled to allow tools like Cargo to have time to
migrate to the new flags before spraying warnings to all users.
cc https://github.com/rust-lang/rust/issues/19051
|
|
This commit shuffles around some CLI flags of the compiler to some more stable
locations with some renamings. The changes made were:
* The `-v` flag has been repurposes as the "verbose" flag. The version flag has
been renamed to `-V`.
* The `-h` screen has been split into two parts. Most top-level options (not
all) show with `-h`, and the remaining options (generally obscure) can be
shown with `--help -v` which is a "verbose help screen"
* The `-V` flag (version flag now) has lost its argument as it is now requested
with `rustc -vV` "verbose version".
* The `--emit` option has had its `ir` and `bc` variants renamed to `llvm-ir`
and `llvm-bc` to emphasize that they are LLVM's IR/bytecode.
* The `--emit` option has grown a new variant, `dep-info`, which subsumes the
`--dep-info` CLI argument. The `--dep-info` flag is now deprecated.
* The `--parse-only`, `--no-trans`, and `--no-analysis` flags have
moved behind the `-Z` family of flags.
* The `--debuginfo` and `--opt-level` flags were moved behind the top-level `-C`
flag.
* The `--print-file-name` and `--print-crate-name` flags were moved behind one
global `--print` flag which now accepts one of `crate-name`, `file-names`, or
`sysroot`. This global `--print` flag is intended to serve as a mechanism for
learning various metadata about the compiler itself.
No warnings are currently enabled to allow tools like Cargo to have time to
migrate to the new flags before spraying warnings to all users.
|
|
This commit is part of a series that introduces a `std::thread` API to
replace `std::task`.
In the new API, `spawn` returns a `JoinGuard`, which by default will
join the spawned thread when dropped. It can also be used to join
explicitly at any time, returning the thread's result. Alternatively,
the spawned thread can be explicitly detached (so no join takes place).
As part of this change, Rust processes now terminate when the main
thread exits, even if other detached threads are still running, moving
Rust closer to standard threading models. This new behavior may break code
that was relying on the previously implicit join-all.
In addition to the above, the new thread API also offers some built-in
support for building blocking abstractions in user space; see the module
doc for details.
Closes #18000
[breaking-change]
|
|
|
|
|
|
followed by a semicolon.
This allows code like `vec![1i, 2, 3].len();` to work.
This breaks code that uses macros as statements without putting
semicolons after them, such as:
fn main() {
...
assert!(a == b)
assert!(c == d)
println(...);
}
It also breaks code that uses macros as items without semicolons:
local_data_key!(foo)
fn main() {
println("hello world")
}
Add semicolons to fix this code. Those two examples can be fixed as
follows:
fn main() {
...
assert!(a == b);
assert!(c == d);
println(...);
}
local_data_key!(foo);
fn main() {
println("hello world")
}
RFC #378.
Closes #18635.
[breaking-change]
|
|
|
|
|
|
|
|
|
|
|
|
these are missing standard #![doc(...)]. add them
|
|
|
|
|
|
|
|
Descriptions and licenses are handled by Cargo now, so there's no reason
to keep these attributes around.
|
|
|
|
Descriptions and licenses are handled by Cargo now, so there's no reason
to keep these attributes around.
|
|
|
|
This commit removes the `std::local_data` module in favor of a new
`std::thread_local` module providing thread local storage. The module provides
two variants of TLS: one which owns its contents and one which is based on
scoped references. Each implementation has pros and cons listed in the
documentation.
Both flavors have accessors through a function called `with` which yield a
reference to a closure provided. Both flavors also panic if a reference cannot
be yielded and provide a function to test whether an access would panic or not.
This is an implementation of [RFC 461][rfc] and full details can be found in
that RFC.
This is a breaking change due to the removal of the `std::local_data` module.
All users can migrate to the new thread local system like so:
thread_local!(static FOO: Rc<RefCell<Option<T>>> = Rc::new(RefCell::new(None)))
The old `local_data` module inherently contained the `Rc<RefCell<Option<T>>>` as
an implementation detail which must now be explicitly stated by users.
[rfc]: https://github.com/rust-lang/rfcs/pull/461
[breaking-change]
|
|
The struct_variant is not gated anymore. This commit just removes it and the resulting warnings when compiling rust. Now compiles with the snapshot from 11/18 (as opposed to PR #19014)
|
|
Made it so that what passes are used is passed onto the renderer so it
can intelligently deal with private modules.
|
|
|
|
This commit applies the stabilization of std::fmt as outlined in [RFC 380][rfc].
There are a number of breaking changes as a part of this commit which will need
to be handled to migrated old code:
* A number of formatting traits have been removed: String, Bool, Char, Unsigned,
Signed, and Float. It is recommended to instead use Show wherever possible or
to use adaptor structs to implement other methods of formatting.
* The format specifier for Boolean has changed from `t` to `b`.
* The enum `FormatError` has been renamed to `Error` as well as becoming a unit
struct instead of an enum. The `WriteError` variant no longer exists.
* The `format_args_method!` macro has been removed with no replacement. Alter
code to use the `format_args!` macro instead.
* The public fields of a `Formatter` have become read-only with no replacement.
Use a new formatting string to alter the formatting flags in combination with
the `write!` macro. The fields can be accessed through accessor methods on the
`Formatter` structure.
Other than these breaking changes, the contents of std::fmt should now also all
contain stability markers. Most of them are still #[unstable] or #[experimental]
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0380-stabilize-std-fmt.md
[breaking-change]
Closes #18904
|
|
Reduces memory usage significantly and opens opportunities for more parallel compilation.
This PR was previously #19002 but I closed it because bors didn't seem to recognize the `r+` annotations there.
|
