| Age | Commit message (Collapse) | Author | Lines |
|---|
|
When an integral value is expected by the user but a fractional value is
found, the current implementation uses std::num::cast() to coerce to an
integer type, losing the fractional part. This behavior is not desirable
because the number loses precision without notice.
This commit makes it raise ExpectedError when such a situation arises.
[breaking-change]
|
|
serialize::json::Encoder currently uses f64 to emit any integral type.
This is possibly due to the behavior of JavaScript, which uses f64 to
represent any numeric value.
This leads to a problem that only the integers in the range of [-2^53+1,
2^53-1] can be encoded. Therefore, i64 and u64 cannot be used reliably
in the current implementation.
RFC 7159 suggests that good interoperability can be achieved if the
range is respected by implementations. However, it also says that
implementations are allowed to set the range of number accepted. And it
seems that the JSON encoders outside of the JavaScript world usually
make use of i64 values.
This commit removes the float preprocessing done in the emit_* methods.
It also increases performance, because transforming f64 into String
costs more than that of an integral type.
Fixes #18319
[breaking-change]
|
|
|
|
|
|
Descriptions and licenses are handled by Cargo now, so there's no reason
to keep these attributes around.
|
|
|
|
Sister pull request of https://github.com/rust-lang/rust/pull/19288, but
for the other style of block doc comment.
|
|
|
|
Implements RFC 438.
Fixes #19092.
This is a [breaking-change]: change types like `&Foo+Send` or `&'a mut Foo+'a` to `&(Foo+Send)` and `&'a mut (Foo+'a)`, respectively.
r? @brson
|
|
This is considered good convention.
This is about half of them in total, I just don't want an impossible to land patch. :smile:
|
|
Descriptions and licenses are handled by Cargo now, so there's no reason
to keep these attributes around.
|
|
|
|
The type aliases json::JsonString and json::JsonObject were originally
prefixed with 'json' to prevent collisions with (at the time) the enums
json::String and json::Object respectively. Now that enum namespacing
has landed, this 'json' prefix is redundant and can be removed:
json::JsonArray -> json::Array
json::JsonObject -> json::Object
In addition, this commit also unpublicizes all of the re-exports in this
JSON module, as a part of #19253
[breaking-change]
|
|
This is considered good convention.
|
|
|
|
This commit is an implementation of [RFC 240][rfc] when applied to the standard
library. It primarily deprecates the entirety of `string::raw`, `vec::raw`,
`slice::raw`, and `str::raw` in favor of associated functions, methods, and
other free functions. The detailed renaming is:
* slice::raw::buf_as_slice => slice::from_raw_buf
* slice::raw::mut_buf_as_slice => slice::from_raw_mut_buf
* slice::shift_ptr => deprecated with no replacement
* slice::pop_ptr => deprecated with no replacement
* str::raw::from_utf8 => str::from_utf8_unchecked
* str::raw::c_str_to_static_slice => str::from_c_str
* str::raw::slice_bytes => deprecated for slice_unchecked (slight semantic diff)
* str::raw::slice_unchecked => str.slice_unchecked
* string::raw::from_parts => String::from_raw_parts
* string::raw::from_buf_len => String::from_raw_buf_len
* string::raw::from_buf => String::from_raw_buf
* string::raw::from_utf8 => String::from_utf8_unchecked
* vec::raw::from_buf => Vec::from_raw_buf
All previous functions exist in their `#[deprecated]` form, and the deprecation
messages indicate how to migrate to the newer variants.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0240-unsafe-api-location.md
[breaking-change]
Closes #17863
|
|
This commit is an implementation of [RFC 240][rfc] when applied to the standard
library. It primarily deprecates the entirety of `string::raw`, `vec::raw`,
`slice::raw`, and `str::raw` in favor of associated functions, methods, and
other free functions. The detailed renaming is:
* slice::raw::buf_as_slice => slice::with_raw_buf
* slice::raw::mut_buf_as_slice => slice::with_raw_mut_buf
* slice::shift_ptr => deprecated with no replacement
* slice::pop_ptr => deprecated with no replacement
* str::raw::from_utf8 => str::from_utf8_unchecked
* str::raw::c_str_to_static_slice => str::from_c_str
* str::raw::slice_bytes => deprecated for slice_unchecked (slight semantic diff)
* str::raw::slice_unchecked => str.slice_unchecked
* string::raw::from_parts => String::from_raw_parts
* string::raw::from_buf_len => String::from_raw_buf_len
* string::raw::from_buf => String::from_raw_buf
* string::raw::from_utf8 => String::from_utf8_unchecked
* vec::raw::from_buf => Vec::from_raw_buf
All previous functions exist in their `#[deprecated]` form, and the deprecation
messages indicate how to migrate to the newer variants.
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0240-unsafe-api-location.md
[breaking-change]
Closes #17863
|
|
Fixes #19010
|
|
|
|
Fixes #19010
|
|
This commit applies the stabilization of std::fmt as outlined in [RFC 380][rfc].
There are a number of breaking changes as a part of this commit which will need
to be handled to migrated old code:
* A number of formatting traits have been removed: String, Bool, Char, Unsigned,
Signed, and Float. It is recommended to instead use Show wherever possible or
to use adaptor structs to implement other methods of formatting.
* The format specifier for Boolean has changed from `t` to `b`.
* The enum `FormatError` has been renamed to `Error` as well as becoming a unit
struct instead of an enum. The `WriteError` variant no longer exists.
* The `format_args_method!` macro has been removed with no replacement. Alter
code to use the `format_args!` macro instead.
* The public fields of a `Formatter` have become read-only with no replacement.
Use a new formatting string to alter the formatting flags in combination with
the `write!` macro. The fields can be accessed through accessor methods on the
`Formatter` structure.
Other than these breaking changes, the contents of std::fmt should now also all
contain stability markers. Most of them are still #[unstable] or #[experimental]
[rfc]: https://github.com/rust-lang/rfcs/blob/master/text/0380-stabilize-std-fmt.md
[breaking-change]
Closes #18904
|
|
The trait has an obvious, sensible implementation directly on vectors so
the MemWriter wrapper is unnecessary. This will halt the trend towards
providing all of the vector methods on MemWriter along with eliminating
the noise caused by conversions between the two types. It also provides
the useful default Writer methods on Vec<u8>.
After the type is removed and code has been migrated, it would make
sense to add a new implementation of MemWriter with seeking support. The
simple use cases can be covered with vectors alone, and ones with the
need for seeks can use a new MemWriter implementation.
|
|
This commit handles the fallout from deprecating `_with` and `_equiv` methods.
|
|
This breaks code that referred to variant names in the same namespace as
their enum. Reexport the variants in the old location or alter code to
refer to the new locations:
```
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
=>
```
pub use self::Foo::{A, B};
pub enum Foo {
A,
B
}
fn main() {
let a = A;
}
```
or
```
pub enum Foo {
A,
B
}
fn main() {
let a = Foo::A;
}
```
[breaking-change]
|
|
|
|
|
|
|
|
|
|
This implements a considerable portion of rust-lang/rfcs#369 (tracked in #18640). Some interpretations had to be made in order to get this to work. The breaking changes are listed below:
[breaking-change]
- `core::num::{Num, Unsigned, Primitive}` have been deprecated and their re-exports removed from the `{std, core}::prelude`.
- `core::num::{Zero, One, Bounded}` have been deprecated. Use the static methods on `core::num::{Float, Int}` instead. There is no equivalent to `Zero::is_zero`. Use `(==)` with `{Float, Int}::zero` instead.
- `Signed::abs_sub` has been moved to `std::num::FloatMath`, and is no longer implemented for signed integers.
- `core::num::Signed` has been removed, and its methods have been moved to `core::num::Float` and a new trait, `core::num::SignedInt`. The methods now take the `self` parameter by value.
- `core::num::{Saturating, CheckedAdd, CheckedSub, CheckedMul, CheckedDiv}` have been removed, and their methods moved to `core::num::Int`. Their parameters are now taken by value. This means that
- `std::time::Duration` no longer implements `core::num::{Zero, CheckedAdd, CheckedSub}` instead defining the required methods non-polymorphically.
- `core::num::{zero, one, abs, signum}` have been deprecated. Use their respective methods instead.
- The `core::num::{next_power_of_two, is_power_of_two, checked_next_power_of_two}` functions have been deprecated in favor of methods defined a new trait, `core::num::UnsignedInt`
- `core::iter::{AdditiveIterator, MultiplicativeIterator}` are now only implemented for the built-in numeric types.
- `core::iter::{range, range_inclusive, range_step, range_step_inclusive}` now require `core::num::Int` to be implemented for the type they a re parametrized over.
|
|
|
|
Num, NumCast, Unsigned, Float, Primitive and Int have been removed.
|
|
|
|
|
|
|
|
|
|
- ToBase64
- FromBase64
- ToHex
- FromHex
- ToJson
- Encodable
|
|
|
|
|
|
|
|
|
|
Json's find, find_path, and search methods now use &str rather
than &String.
Json can now be indexed with &str (for Objects) and uint
(for Lists).
Tests updated to reflect this change.
[breaking-change]
|
|
|
|
Currently `Decoder` implementations are not provided the tuple arity as
a parameter to `read_tuple`. This forces all encoder/decoder combos to
serialize the arity along with the elements. Tuple-arity is always known
statically at the decode site, because it is part of the type of the
tuple, so it could instead be provided as an argument to `read_tuple`,
as it is to `read_struct`.
The upside to this is that serialized tuples could become smaller in
encoder/decoder implementations which choose not to serialize type
(arity) information. For example, @TyOverby's
[binary-encode](https://github.com/TyOverby/binary-encode) format is
currently forced to serialize the tuple-arity along with every tuple,
despite the information being statically known at the decode site.
A downside to this change is that the tuple-arity of serialized tuples
can no longer be automatically checked during deserialization. However,
for formats which do serialize the tuple-arity, either explicitly (rbml)
or implicitly (json), this check can be added to the `read_tuple` method.
The signature of `Deserialize::read_tuple` and
`Deserialize::read_tuple_struct` are changed, and thus binary
backwards-compatibility is broken. This change does *not* force
serialization formats to change, and thus does not break decoding values
serialized prior to this change.
[breaking-change]
|
|
Conflicts:
src/libcollections/vec.rs
|
|
Conflicts:
src/libcollections/slice.rs
src/libcore/failure.rs
src/libsyntax/parse/token.rs
src/test/debuginfo/basic-types-mut-globals.rs
src/test/debuginfo/simple-struct.rs
src/test/debuginfo/trait-pointers.rs
|
|
This commit enables implementations of IndexMut for a number of collections,
including Vec, RingBuf, SmallIntMap, TrieMap, TreeMap, and HashMap. At the same
time this deprecates the `get_mut` methods on vectors in favor of using the
indexing notation.
cc #18424
|
|
https://github.com/rust-lang/rfcs/pull/221
The current terminology of "task failure" often causes problems when
writing or speaking about code. You often want to talk about the
possibility of an operation that returns a Result "failing", but cannot
because of the ambiguity with task failure. Instead, you have to speak
of "the failing case" or "when the operation does not succeed" or other
circumlocutions.
Likewise, we use a "Failure" header in rustdoc to describe when
operations may fail the task, but it would often be helpful to separate
out a section describing the "Err-producing" case.
We have been steadily moving away from task failure and toward Result as
an error-handling mechanism, so we should optimize our terminology
accordingly: Result-producing functions should be easy to describe.
To update your code, rename any call to `fail!` to `panic!` instead.
Assuming you have not created your own macro named `panic!`, this
will work on UNIX based systems:
grep -lZR 'fail!' . | xargs -0 -l sed -i -e 's/fail!/panic!/g'
You can of course also do this by hand.
[breaking-change]
|
|
|
|
This adds impls of Eq/Ord/PartialEq/PartialOrd/Show/Default to Arc<T>, and it
also removes the `Send + Sync` bound on the `Clone` impl of Arc to make it more
deriving-friendly. The `Send + Sync` requirement is still enforce on
construction, of course!
|
|
|
