| Age | Commit message (Collapse) | Author | Lines |
|---|
|
Replace its usage with byte string literals, except in `bytes!()` tests.
Also add a new snapshot, to be able to use the new b"foo" syntax.
The src/etc/2014-06-rewrite-bytes-macros.py script automatically
rewrites `bytes!()` invocations into byte string literals.
Pass it filenames as arguments to generate a diff that you can inspect,
or `--apply` followed by filenames to apply the changes in place.
Diffs can be piped into `tip` or `pygmentize -l diff` for coloring.
|
|
Also renames the `Container` trait to `Collection`.
[breaking-change]
|
|
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
|
|
[breaking-change]
|
|
|
|
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
|
|
After discussion with Alex, we think the proper policy is for dtors
to not fail. This is consistent with C++. BufferedWriter already
does this, so this patch modifies TempDir to not fail in the dtor,
adding a `close` method for handling errors on destruction.
|
|
These implementations must live in libstd right now because the fmt module has
not been migrated yet. This will occur in a later PR.
Just to be clear, there are new extension traits, but they are not necessary
once the std::fmt module has migrated to libcore, which is a planned migration
in the future.
|
|
|
|
This removes all resizability support for ~[T] vectors in preparation of DST.
The only growable vector remaining is Vec<T>. In summary, the following methods
from ~[T] and various functions were removed. Each method/function has an
equivalent on the Vec type in std::vec unless otherwise stated.
* slice::OwnedCloneableVector
* slice::OwnedEqVector
* slice::append
* slice::append_one
* slice::build (no replacement)
* slice::bytes::push_bytes
* slice::from_elem
* slice::from_fn
* slice::with_capacity
* ~[T].capacity()
* ~[T].clear()
* ~[T].dedup()
* ~[T].extend()
* ~[T].grow()
* ~[T].grow_fn()
* ~[T].grow_set()
* ~[T].insert()
* ~[T].pop()
* ~[T].push()
* ~[T].push_all()
* ~[T].push_all_move()
* ~[T].remove()
* ~[T].reserve()
* ~[T].reserve_additional()
* ~[T].reserve_exect()
* ~[T].retain()
* ~[T].set_len()
* ~[T].shift()
* ~[T].shrink_to_fit()
* ~[T].swap_remove()
* ~[T].truncate()
* ~[T].unshift()
* ~str.clear()
* ~str.set_len()
* ~str.truncate()
Note that no other API changes were made. Existing apis that took or returned
~[T] continue to do so.
[breaking-change]
|
|
|
|
Closes #12640
|
|
|
|
There's a little more allocation here and there now since
from_utf8_owned can't be used with Vec.
|
|
|
|
This method can be used to fill a byte slice of data entirely, and it's considered an error if any error happens before its entirely filled.
|
|
`Vec` is now used for the internal buffer instead of `~[]`. Some module
level documentation somehow ended up attached to `BufferedReader` so I
fixed that as well.
|
|
I've found a common use case being to fill a slice (not an owned vector)
completely with bytes. It's posible for short reads to happen, and if you're
trying to get an exact number of bytes then this helper will be useful.
|
|
Closes #12702
|
|
Most IO related functions return an IoResult so that the caller can handle failure
in whatever way is appropriate. However, the `lines`, `bytes`, and `chars` iterators all
supress errors. This means that code that needs to handle errors can't use any of these
iterators. All three of these iterators were updated to produce IoResults.
Fixes #12368
|
|
|
|
It's still not entirely clear what should happen if there was an error when
flushing, but I'm deferring that decision to #12628. I believe that it's crucial
for the usefulness of buffered writers to be able to flush on drop. It's just
too easy to forget to flush them in small one-off use cases.
cc #12628
|
|
Formatting via reflection has been a little questionable for some time now, and
it's a little unfortunate that one of the standard macros will silently use
reflection when you weren't expecting it. This adds small bits of code bloat to
libraries, as well as not always being necessary. In light of this information,
this commit switches assert_eq!() to using {} in the error message instead of
{:?}.
In updating existing code, there were a few error cases that I encountered:
* It's impossible to define Show for [T, ..N]. I think DST will alleviate this
because we can define Show for [T].
* A few types here and there just needed a #[deriving(Show)]
* Type parameters needed a Show bound, I often moved this to `assert!(a == b)`
* `Path` doesn't implement `Show`, so assert_eq!() cannot be used on two paths.
I don't think this is much of a regression though because {:?} on paths looks
awful (it's a byte array).
Concretely speaking, this shaved 10K off a 656K binary. Not a lot, but sometime
significant for smaller binaries.
|
|
This "bubble up an error" macro was originally named if_ok! in order to get it
landed, but after the fact it was discovered that this name is not exactly
desirable.
The name `if_ok!` isn't immediately clear that is has much to do with error
handling, and it doesn't look fantastic in all contexts (if if_ok!(...) {}). In
general, the agreed opinion about `if_ok!` is that is came in as subpar.
The name `try!` is more invocative of error handling, it's shorter by 2 letters,
and it looks fitting in almost all circumstances. One concern about the word
`try!` is that it's too invocative of exceptions, but the belief is that this
will be overcome with documentation and examples.
Close #12037
|
|
|
|
|
|
|
|
Add `std::io::Chars` iterator and `Buffer#chars()` method
|
|
* Stop referencing io_error
* Start changing "Failure" sections to "Error" sections
* Update all doc examples to work.
|
|
|
|
* All I/O now returns IoResult<T> = Result<T, IoError>
* All formatting traits now return fmt::Result = IoResult<()>
* The if_ok!() macro was added to libstd
|
|
Fixes #10667 and closes #10259.
|
|
|
|
* Reexport io::mem and io::buffered structs directly under io, make mem/buffered
private modules
* Remove with_mem_writer
* Remove DEFAULT_CAPACITY and use DEFAULT_BUF_SIZE (in io::buffered)
|
|
|
|
This is just an unnecessary trait that no one's ever going to parameterize over
and it's more useful to just define the methods directly on the types
themselves. The implementors of this type almost always don't want
inner_mut_ref() but they're forced to define it as well.
|
|
Closes #11372
|
|
|
|
|
|
The two `Some(0)' used to be `None' before the patch, a zero-byte long
read exhausting a reader (and thereafter) still produce a `None'.
|
|
Could prevent callers from catching the situation and lead to e.g early
iterator terminations (cf. `Reader::read_byte') since `None' is only to
be returned only on EOF.
|
|
See commits for details.
|
|
|
|
raw}::copy_memory.
Slices carry their length with them, so we can just use that
information.
|
|
|
|
- `Buffer.lines()` returns `LineIterator` which yields line using
`.read_line()`.
- `Reader.bytes()` now takes `&mut self` instead of `self`.
- `Reader.read_until()` swallows `EndOfFile`. This also affects
`.read_line()`.
|
|
BufferedWriter::inner flushes before returning the underlying writer.
BufferedWriter::write no longer flushes the underlying writer.
LineBufferedWriter::write flushes up to the *last* newline in the input
string, not the first.
|
|
compile-fail tests, run-fail tests, and run-pass tests.
|
|
This implements a fair amount of the unimpl() functionality in io::native
relating to filesystem operations. I've also modified all io::fs tests to run in
both a native and uv environment (so everything is actually tested).
There are a two bits of remaining functionality which I was unable to get
working:
* change_file_times on windows
* lstat on windows
I think that change_file_times may just need a better interface, but lstat has a
large implementation in libuv which I didn't want to tackle trying to copy.
|
|
This trait is meant to abstract whether a reader is actually implemented with an
underlying buffer. For all readers which are implemented as such, we can
efficiently implement things like read_char, read_line, read_until, etc. There
are two required methods for managing the internal buffer, and otherwise
read_line and friends can all become default methods.
Closes #10334
|
