| Age | Commit message (Collapse) | Author | Lines |
|---|
|
We use re-exported pathes (e.g. std::io::Command) and original ones
(e.g. std::io::process::Command) together in examples now. Using
re-exported ones consistently avoids confusion.
Signed-off-by: OGINO Masanori <masanori.ogino@gmail.com>
|
|
This breaks a fair amount of code. The typical patterns are:
* `for _ in range(0, 10)`: change to `for _ in range(0u, 10)`;
* `println!("{}", 3)`: change to `println!("{}", 3i)`;
* `[1, 2, 3].len()`: change to `[1i, 2, 3].len()`.
RFC #30. Closes #6023.
[breaking-change]
|
|
|
|
Also renames the `Container` trait to `Collection`.
[breaking-change]
|
|
|
|
|
|
This completes the last stage of the renaming of the comparison hierarchy of
traits. This change renames TotalEq to Eq and TotalOrd to Ord.
In the future the new Eq/Ord will be filled out with their appropriate methods,
but for now this change is purely a renaming change.
[breaking-change]
|
|
This is part of the ongoing renaming of the equality traits. See #12517 for more
details. All code using Eq/Ord will temporarily need to move to Partial{Eq,Ord}
or the Total{Eq,Ord} traits. The Total traits will soon be renamed to {Eq,Ord}.
cc #12517
[breaking-change]
|
|
[breaking-change]
|
|
|
|
1. Wherever the `buf` field of a `Formatter` was used, the `Formatter` is used
instead.
2. The usage of `write_fmt` is minimized as much as possible, the `write!` macro
is preferred wherever possible.
3. Usage of `fmt::write` is minimized, favoring the `write!` macro instead.
|
|
Signed-off-by: OGINO Masanori <masanori.ogino@gmail.com>
|
|
|
|
Fall back to get_host_addresses to try a DNS lookup if we can't
parse it as an IP address.
|
|
Prior to this commit, TcpStream::connect and TcpListener::bind took a
single SocketAddr argument. This worked well enough, but the API felt a
little too "low level" for most simple use cases.
A great example is connecting to rust-lang.org on port 80. Rust users would
need to:
1. resolve the IP address of rust-lang.org using
io::net::addrinfo::get_host_addresses.
2. check for errors
3. if all went well, use the returned IP address and the port number
to construct a SocketAddr
4. pass this SocketAddr to TcpStream::connect.
I'm modifying the type signature of TcpStream::connect and
TcpListener::bind so that the API is a little easier to use.
TcpStream::connect now accepts two arguments: a string describing the
host/IP of the host we wish to connect to, and a u16 representing the
remote port number.
Similarly, TcpListener::bind has been modified to take two arguments:
a string describing the local interface address (e.g. "0.0.0.0" or
"127.0.0.1") and a u16 port number.
Here's how to port your Rust code to use the new TcpStream::connect API:
// old ::connect API
let addr = SocketAddr{ip: Ipv4Addr{127, 0, 0, 1}, port: 8080};
let stream = TcpStream::connect(addr).unwrap()
// new ::connect API (minimal change)
let addr = SocketAddr{ip: Ipv4Addr{127, 0, 0, 1}, port: 8080};
let stream = TcpStream::connect(addr.ip.to_str(), addr.port()).unwrap()
// new ::connect API (more compact)
let stream = TcpStream::connect("127.0.0.1", 8080).unwrap()
// new ::connect API (hostname)
let stream = TcpStream::connect("rust-lang.org", 80)
Similarly, for TcpListener::bind:
// old ::bind API
let addr = SocketAddr{ip: Ipv4Addr{0, 0, 0, 0}, port: 8080};
let mut acceptor = TcpListener::bind(addr).listen();
// new ::bind API (minimal change)
let addr = SocketAddr{ip: Ipv4Addr{0, 0, 0, 0}, port: 8080};
let mut acceptor = TcpListener::bind(addr.ip.to_str(), addr.port()).listen()
// new ::bind API (more compact)
let mut acceptor = TcpListener::bind("0.0.0.0", 8080).listen()
[breaking-change]
|
|
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
|
|
This test runs successfully manually, but the bots are having trouble getting
this test to pass. Ignore it on freebsd for now.
|
|
This was intended as part of the I/O timeouts commit, but it was mistakenly
forgotten. The type of the timeout argument is not guaranteed to remain constant
into the future.
|
|
API Changes:
- get_host_addresses() returns IoResult<Vec<IpAddr>>
- Process.extra_io is Vec<Option<io::PipeStream>>
|
|
This test runs successfully manually, but the bots are having trouble getting
this test to pass. Ignore it on freebsd for now.
|
|
This was intended as part of the I/O timeouts commit, but it was mistakenly
forgotten. The type of the timeout argument is not guaranteed to remain constant
into the future.
|
|
This is the last remaining networkig object to implement timeouts for. This
takes advantage of the CancelIo function and the already existing asynchronous
I/O functionality of pipes.
|
|
These timeouts all follow the same pattern as established by the timeouts on
acceptors. There are three methods: set_timeout, set_read_timeout, and
set_write_timeout. Each of these sets a point in the future after which
operations will time out.
Timeouts with cloned objects are a little trickier. Each object is viewed as
having its own timeout, unaffected by other objects' timeouts. Additionally,
timeouts do not propagate when a stream is cloned or when a cloned stream has
its timeouts modified.
This commit is just the public interface which will be exposed for timeouts, the
implementation will come in later commits.
|
|
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
|
|
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
|
|
These implementations must live in libstd right now because the fmt module has
not been migrated yet. This will occur in a later PR.
Just to be clear, there are new extension traits, but they are not necessary
once the std::fmt module has migrated to libcore, which is a planned migration
in the future.
|
|
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
r? @brson or @alexcrichton or whoever
|
|
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
|
|
The underlying I/O objects implement a good deal of various options here and
there for tuning network sockets and how they perform. Most of this is a relic
of "whatever libuv provides", but these options are genuinely useful.
It is unclear at this time whether these options should be well supported or
not, or whether they have correct names or not. For now, I believe it's better
to expose the functionality than to not, but all new methods are added with
an #[experimental] annotation.
|
|
|
|
The underlying I/O objects implement a good deal of various options here and
there for tuning network sockets and how they perform. Most of this is a relic
of "whatever libuv provides", but these options are genuinely useful.
It is unclear at this time whether these options should be well supported or
not, or whether they have correct names or not. For now, I believe it's better
to expose the functionality than to not, but all new methods are added with
an #[experimental] annotation.
|
|
This adds support for connecting to a unix socket with a timeout (a named pipe
on windows), and accepting a connection with a timeout. The goal is to bring
unix pipes/named sockets back in line with TCP support for timeouts.
Similarly to the TCP sockets, all methods are marked #[experimental] due to
uncertainty about the type of the timeout argument.
This internally involved a good bit of refactoring to share as much code as
possible between TCP servers and pipe servers, but the core implementation did
not change drastically as part of this commit.
cc #13523
|
|
This adds experimental support for timeouts when accepting sockets through
`TcpAcceptor::accept`. This does not add a separate `accept_timeout` function,
but rather it adds a `set_timeout` function instead. This second function is
intended to be used as a hard deadline after which all accepts will never block
and fail immediately.
This idea was derived from Go's SetDeadline() methods. We do not currently have
a robust time abstraction in the standard library, so I opted to have the
argument be a relative time in millseconds into the future. I believe a more
appropriate argument type is an absolute time, but this concept does not exist
yet (this is also why the function is marked #[experimental]).
The native support is built on select(), similarly to connect_timeout(), and the
green support is based on channel select and a timer.
cc #13523
|
|
This adds experimental support for timeouts when accepting sockets through
`TcpAcceptor::accept`. This does not add a separate `accept_timeout` function,
but rather it adds a `set_timeout` function instead. This second function is
intended to be used as a hard deadline after which all accepts will never block
and fail immediately.
This idea was derived from Go's SetDeadline() methods. We do not currently have
a robust time abstraction in the standard library, so I opted to have the
argument be a relative time in millseconds into the future. I believe a more
appropriate argument type is an absolute time, but this concept does not exist
yet (this is also why the function is marked #[experimental]).
The native support is built on select(), similarly to connect_timeout(), and the
green support is based on channel select and a timer.
cc #13523
|
|
This alters the borrow checker's requirements on invoking closures from
requiring an immutable borrow to requiring a unique immutable borrow. This means
that it is illegal to invoke a closure through a `&` pointer because there is no
guarantee that is not aliased. This does not mean that a closure is required to
be in a mutable location, but rather a location which can be proven to be
unique (often through a mutable pointer).
For example, the following code is unsound and is no longer allowed:
type Fn<'a> = ||:'a;
fn call(f: |Fn|) {
f(|| {
f(|| {})
});
}
fn main() {
call(|a| {
a();
});
}
There is no replacement for this pattern. For all closures which are stored in
structures, it was previously allowed to invoke the closure through `&self` but
it now requires invocation through `&mut self`.
The standard library has a good number of violations of this new rule, but the
fixes will be separated into multiple breaking change commits.
Closes #12224
|
|
This fixes various issues throughout the standard distribution and tests.
|
|
This prevents unix sockets from remaining on the system all over the place, and
more closely mirrors the behavior of libuv and windows pipes.
|
|
This adds a `TcpStream::connect_timeout` function in order to assist opening
connections with a timeout (cc #13523). There isn't really much design space for
this specific operation (unlike timing out normal blocking reads/writes), so I
am fairly confident that this is the correct interface for this function.
The function is marked #[experimental] because it takes a u64 timeout argument,
and the u64 type is likely to change in the future.
|
|
|
|
|
|
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
* `Sender::try_send(t: T) -> bool`
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
* `SyncSender::try_send(t: T) -> TrySendResult<T>`
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
* `SyncSender::send_opt(t: T) -> Option<T>`
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
* `Receiver::try_recv(t: T) -> TryRecvResult<T>`
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes #11527
|
|
Someone reading the docs won't know what the types of various things
are, so this adds them in a few meaningful places to help with
comprehension.
cc #13423.
|
|
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
Sender::try_send(t: T) -> bool
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
SyncSender::try_send(t: T) -> TrySendResult<T>
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
SyncSender::send_opt(t: T) -> Option<T>
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
Receiver::try_recv(t: T) -> TryRecvResult<T>
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes #11527
|
|
|
|
There's a little more allocation here and there now since
from_utf8_owned can't be used with Vec.
|
|
|
|
|
|
Closes #2569
|
|
This is all purely fallout of getting the previous commit to compile.
|
|
These are mostly touchups from the previous commit.
|
