| Age | Commit message (Collapse) | Author | Lines |
|---|
|
These timeouts all follow the same pattern as established by the timeouts on
acceptors. There are three methods: set_timeout, set_read_timeout, and
set_write_timeout. Each of these sets a point in the future after which
operations will time out.
Timeouts with cloned objects are a little trickier. Each object is viewed as
having its own timeout, unaffected by other objects' timeouts. Additionally,
timeouts do not propagate when a stream is cloned or when a cloned stream has
its timeouts modified.
This commit is just the public interface which will be exposed for timeouts, the
implementation will come in later commits.
|
|
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
|
|
Two new methods were added to TcpStream and UnixStream:
fn close_read(&mut self) -> IoResult<()>;
fn close_write(&mut self) -> IoResult<()>;
These two methods map to shutdown()'s behavior (the system call on unix),
closing the reading or writing half of a duplex stream. These methods are
primarily added to allow waking up a pending read in another task. By closing
the reading half of a connection, all pending readers will be woken up and will
return with EndOfFile. The close_write() method was added for symmetry with
close_read(), and I imagine that it will be quite useful at some point.
Implementation-wise, librustuv got the short end of the stick this time. The
native versions just delegate to the shutdown() syscall (easy). The uv versions
can leverage uv_shutdown() for tcp/unix streams, but only for closing the
writing half. Closing the reading half is done through some careful dancing to
wake up a pending reader.
As usual, windows likes to be different from unix. The windows implementation
uses shutdown() for sockets, but shutdown() is not available for named pipes.
Instead, CancelIoEx was used with same fancy synchronization to make sure
everyone knows what's up.
cc #11165
|
|
See #14008 for more details
|
|
These implementations must live in libstd right now because the fmt module has
not been migrated yet. This will occur in a later PR.
Just to be clear, there are new extension traits, but they are not necessary
once the std::fmt module has migrated to libcore, which is a planned migration
in the future.
|
|
This adds an small of failure to libcore, hamstrung by the fact that std::fmt
hasn't been migrated yet. A few asserts were re-worked to not use std::fmt
features, but these asserts can go back to their original form once std::fmt has
migrated.
The current failure implementation is to just have some symbols exposed by
std::rt::unwind that are linked against by libcore. This is an explicit circular
dependency, unfortunately. This will be officially supported in the future
through compiler support with much nicer failure messages. Additionally, there
are two depended-upon symbols today, but in the future there will only be one
(once std::fmt has migrated).
|
|
This moves as much allocation as possible from teh std::str module into
core::str. This includes essentially all non-allocating functionality, mostly
iterators and slicing and such.
This primarily splits the Str trait into only having the as_slice() method,
adding a new StrAllocating trait to std::str which contains the relevant new
allocation methods. This is a breaking change if any of the methods of "trait
Str" were overriden. The old functionality can be restored by implementing both
the Str and StrAllocating traits.
[breaking-change]
|
|
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
|
|
|
|
See #11273 and #13318
|
|
|
|
This adds support for connecting to a unix socket with a timeout (a named pipe
on windows), and accepting a connection with a timeout. The goal is to bring
unix pipes/named sockets back in line with TCP support for timeouts.
Similarly to the TCP sockets, all methods are marked #[experimental] due to
uncertainty about the type of the timeout argument.
This internally involved a good bit of refactoring to share as much code as
possible between TCP servers and pipe servers, but the core implementation did
not change drastically as part of this commit.
cc #13523
|
|
This update brings a few months of changes, but primarily a fix for the
following situation.
When creating a handle to stdin, libuv used to set the stdin handle to
nonblocking mode. This would end up affect this stdin handle across all
processes that shared it, which mean that stdin become nonblocking for everyone
using the same stdin. On linux, this also affected *stdout* because stdin/stdout
roughly point at the same thing.
This problem became apparent when running the test suite manually on a local
computer. The stdtest suite (running with libgreen) would set stdout to
nonblocking mode (as described above), and then the next test suite would always
fail for a printing failure (because stdout was returning EAGAIN).
This has been fixed upstream, joyent/libuv@342e8c, and this update pulls in this
fix. This also brings us in line with a recently upstreamed libuv patch.
Closes #13336
Closes #13355
|
|
This adds experimental support for timeouts when accepting sockets through
`TcpAcceptor::accept`. This does not add a separate `accept_timeout` function,
but rather it adds a `set_timeout` function instead. This second function is
intended to be used as a hard deadline after which all accepts will never block
and fail immediately.
This idea was derived from Go's SetDeadline() methods. We do not currently have
a robust time abstraction in the standard library, so I opted to have the
argument be a relative time in millseconds into the future. I believe a more
appropriate argument type is an absolute time, but this concept does not exist
yet (this is also why the function is marked #[experimental]).
The native support is built on select(), similarly to connect_timeout(), and the
green support is based on channel select and a timer.
cc #13523
|
|
This adds experimental support for timeouts when accepting sockets through
`TcpAcceptor::accept`. This does not add a separate `accept_timeout` function,
but rather it adds a `set_timeout` function instead. This second function is
intended to be used as a hard deadline after which all accepts will never block
and fail immediately.
This idea was derived from Go's SetDeadline() methods. We do not currently have
a robust time abstraction in the standard library, so I opted to have the
argument be a relative time in millseconds into the future. I believe a more
appropriate argument type is an absolute time, but this concept does not exist
yet (this is also why the function is marked #[experimental]).
The native support is built on select(), similarly to connect_timeout(), and the
green support is based on channel select and a timer.
cc #13523
|
|
This alters the borrow checker's requirements on invoking closures from
requiring an immutable borrow to requiring a unique immutable borrow. This means
that it is illegal to invoke a closure through a `&` pointer because there is no
guarantee that is not aliased. This does not mean that a closure is required to
be in a mutable location, but rather a location which can be proven to be
unique (often through a mutable pointer).
For example, the following code is unsound and is no longer allowed:
type Fn<'a> = ||:'a;
fn call(f: |Fn|) {
f(|| {
f(|| {})
});
}
fn main() {
call(|a| {
a();
});
}
There is no replacement for this pattern. For all closures which are stored in
structures, it was previously allowed to invoke the closure through `&self` but
it now requires invocation through `&mut self`.
The standard library has a good number of violations of this new rule, but the
fixes will be separated into multiple breaking change commits.
Closes #12224
|
|
As with the previous commits, the Finally trait is primarily implemented for
closures, so the trait was modified from `&self` to `&mut self`. This will
require that any closure variable invoked with `finally` to be stored in a
mutable slot.
[breaking-change]
|
|
|
|
|
|
Previously, symbols with rust escape sequences (denoted with dollar signs)
weren't demangled if the escape sequence showed up in the middle. This alters
the printing loop to look through the entire string for dollar characters.
|
|
This adds a `TcpStream::connect_timeout` function in order to assist opening
connections with a timeout (cc #13523). There isn't really much design space for
this specific operation (unlike timing out normal blocking reads/writes), so I
am fairly confident that this is the correct interface for this function.
The function is marked #[experimental] because it takes a u64 timeout argument,
and the u64 type is likely to change in the future.
|
|
On windows, correctly check for errors when spawning threads, and on both
windows and unix handle the error more gracefully rather than printing an opaque
assertion failure.
Closes #13589
|
|
Previously, symbols with rust escape sequences (denoted with dollar signs)
weren't demangled if the escape sequence showed up in the middle. This alters
the printing loop to look through the entire string for dollar characters.
|
|
|
|
On windows, correctly check for errors when spawning threads, and on both
windows and unix handle the error more gracefully rather than printing an opaque
assertion failure.
Closes #13589
|
|
This removes all resizability support for ~[T] vectors in preparation of DST.
The only growable vector remaining is Vec<T>. In summary, the following methods
from ~[T] and various functions were removed. Each method/function has an
equivalent on the Vec type in std::vec unless otherwise stated.
* slice::OwnedCloneableVector
* slice::OwnedEqVector
* slice::append
* slice::append_one
* slice::build (no replacement)
* slice::bytes::push_bytes
* slice::from_elem
* slice::from_fn
* slice::with_capacity
* ~[T].capacity()
* ~[T].clear()
* ~[T].dedup()
* ~[T].extend()
* ~[T].grow()
* ~[T].grow_fn()
* ~[T].grow_set()
* ~[T].insert()
* ~[T].pop()
* ~[T].push()
* ~[T].push_all()
* ~[T].push_all_move()
* ~[T].remove()
* ~[T].reserve()
* ~[T].reserve_additional()
* ~[T].reserve_exect()
* ~[T].retain()
* ~[T].set_len()
* ~[T].shift()
* ~[T].shrink_to_fit()
* ~[T].swap_remove()
* ~[T].truncate()
* ~[T].unshift()
* ~str.clear()
* ~str.set_len()
* ~str.truncate()
Note that no other API changes were made. Existing apis that took or returned
~[T] continue to do so.
[breaking-change]
|
|
|
|
|
|
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
* `Sender::try_send(t: T) -> bool`
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
* `SyncSender::try_send(t: T) -> TrySendResult<T>`
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
* `SyncSender::send_opt(t: T) -> Option<T>`
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
* `Receiver::try_recv(t: T) -> TryRecvResult<T>`
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes #11527
|
|
Closes #12640
based on PR #13030, rebased, and passed all tests.
|
|
Closes #12640
|
|
On some OSes (such as freebsd), pthread_attr_init allocates memory, so this is
necessary to deallocate that memory.
Closes #13420
|
|
There are currently a number of return values from the std::comm methods, not
all of which are necessarily completely expressive:
Sender::try_send(t: T) -> bool
This method currently doesn't transmit back the data `t` if the send fails
due to the other end having disconnected. Additionally, this shares the name
of the synchronous try_send method, but it differs in semantics in that it
only has one failure case, not two (the buffer can never be full).
SyncSender::try_send(t: T) -> TrySendResult<T>
This method accurately conveys all possible information, but it uses a
custom type to the std::comm module with no convenience methods on it.
Additionally, if you want to inspect the result you're forced to import
something from `std::comm`.
SyncSender::send_opt(t: T) -> Option<T>
This method uses Some(T) as an "error value" and None as a "success value",
but almost all other uses of Option<T> have Some/None the other way
Receiver::try_recv(t: T) -> TryRecvResult<T>
Similarly to the synchronous try_send, this custom return type is lacking in
terms of usability (no convenience methods).
With this number of drawbacks in mind, I believed it was time to re-work the
return types of these methods. The new API for the comm module is:
Sender::send(t: T) -> ()
Sender::send_opt(t: T) -> Result<(), T>
SyncSender::send(t: T) -> ()
SyncSender::send_opt(t: T) -> Result<(), T>
SyncSender::try_send(t: T) -> Result<(), TrySendError<T>>
Receiver::recv() -> T
Receiver::recv_opt() -> Result<T, ()>
Receiver::try_recv() -> Result<T, TryRecvError>
The notable changes made are:
* Sender::try_send => Sender::send_opt. This renaming brings the semantics in
line with the SyncSender::send_opt method. An asychronous send only has one
failure case, unlike the synchronous try_send method which has two failure
cases (full/disconnected).
* Sender::send_opt returns the data back to the caller if the send is guaranteed
to fail. This method previously returned `bool`, but then it was unable to
retrieve the data if the data was guaranteed to fail to send. There is still a
race such that when `Ok(())` is returned the data could still fail to be
received, but that's inherent to an asynchronous channel.
* Result is now the basis of all return values. This not only adds lots of
convenience methods to all return values for free, but it also means that you
can inspect the return values with no extra imports (Ok/Err are in the
prelude). Additionally, it's now self documenting when something failed or not
because the return value has "Err" in the name.
Things I'm a little uneasy about:
* The methods send_opt and recv_opt are not returning options, but rather
results. I felt more strongly that Option was the wrong return type than the
_opt prefix was wrong, and I coudn't think of a much better name for these
methods. One possible way to think about them is to read the _opt suffix as
"optionally".
* Result<T, ()> is often better expressed as Option<T>. This is only applicable
to the recv_opt() method, but I thought it would be more consistent for
everything to return Result rather than one method returning an Option.
Despite my two reasons to feel uneasy, I feel much better about the consistency
in return values at this point, and I think the only real open question is if
there's a better suffix for {send,recv}_opt.
Closes #11527
|
|
Replacing `~[]`. This also makes the `walk_dir` iterator use a `Vec`
internally.
|
|
These are all private uses of ~[], so can easily & non-controversially
be replaced with Vec.
|
|
Few places where previous version of tidy script cannot find XXX:
* inside one-line comment preceding by a few spaces;
* inside multiline comments (now it finds it if multiline comment starts
on the same line with XXX).
Change occurences of XXX found by new tidy script.
|
|
|
|
|
|
This is the final commit need to implement [RFC #4](https://github.com/rust-lang/rfcs/blob/master/active/0004-private-fields.md), it makes all tuple struct fields private by default, overridable with the `pub` keyword.
I'll note one divergence from the original RFC which is outlined in the first commit.
|
|
|
|
1778b6361627c5894bf75ffecf427573af02d390 provided the guarantee of no
`exchange_free` calls for ~ZeroSizeType, so a sentinel can now be used
without overhead.
Closes #11998
|
|
move errno -> IoError converter into std, bubble up OSRng errors
Also adds a general errno -> `~str` converter to `std::os`, and makes the failure messages for the things using `OSRng` (e.g. (transitively) the task-local RNG, meaning hashmap initialisation failures aren't such a black box).
|
|
The various ...Rng::new() methods can hit IO errors from the OSRng they use,
and it seems sensible to expose them at a higher level. Unfortunately, writing
e.g. `StdRng::new().unwrap()` gives a much poorer error message than if it
failed internally, but this is a problem with all `IoResult`s.
|
|
This commit deals with the fallout of the previous change by making tuples
structs have public fields where necessary (now that the fields are private by
default).
|
|
|
|
Closes #2569
|
|
This is all purely fallout of getting the previous commit to compile.
|
|
This can be done now that logging has been moved out and libnative is the default (not libgreen)
|
|
This commit contains an implementation of synchronous, bounded channels for
Rust. This is an implementation of the proposal made last January [1]. These
channels are built on mutexes, and currently focus on a working implementation
rather than speed. Receivers for sync channels have select() implemented for
them, but there is currently no implementation of select() for sync senders.
Rust will continue to provide both synchronous and asynchronous channels as part
of the standard distribution, there is no intent to remove asynchronous
channels. This flavor of channels is meant to provide an alternative to
asynchronous channels because like green tasks, asynchronous channels are not
appropriate for all situations.
[1] - https://mail.mozilla.org/pipermail/rust-dev/2014-January/007924.html
|
|
* Remove clone-ability from all primitives. All shared state will now come
from the usage of the primitives being shared, not the primitives being
inherently shareable. This allows for fewer allocations for stack-allocated
primitives.
* Add `Mutex<T>` and `RWLock<T>` which are stack-allocated primitives for purely
wrapping a piece of data
* Remove `RWArc<T>` in favor of `Arc<RWLock<T>>`
* Remove `MutexArc<T>` in favor of `Arc<Mutex<T>>`
* Shuffle around where things are located
* The `arc` module now only contains `Arc`
* A new `lock` module contains `Mutex`, `RWLock`, and `Barrier`
* A new `raw` module contains the primitive implementations of `Semaphore`,
`Mutex`, and `RWLock`
* The Deref/DerefMut trait was implemented where appropriate
* `CowArc` was removed, the functionality is now part of `Arc` and is tagged
with `#[experimental]`.
* The crate now has #[deny(missing_doc)]
* `Arc` now supports weak pointers
This is not a large-scale rewrite of the functionality contained within the
`sync` crate, but rather a shuffling of who does what an a thinner hierarchy of
ownership to allow for better composability.
|
