| Age | Commit message (Collapse) | Author | Lines |
|---|
|
[breaking-change]
|
|
|
|
[breaking-change]
|
|
These have all been deprecated for awhile now, so it's likely time to start removing them.
|
|
|
|
|
|
This is now only used internally by the compiler.
|
|
Excluding the functions inherited from the cast module last week (with marked
stability levels), these functions received the following treatment.
* size_of - this method has become #[stable]
* nonzero_size_of/nonzero_size_of_val - these methods have been removed
* min_align_of - this method is now #[stable]
* pref_align_of - this method has been renamed without the
`pref_` prefix, and it is the "default alignment" now. This decision is in line
with what clang does (see url linked in comment on function). This function
is now #[stable].
* init - renamed to zeroed and marked #[stable]
* uninit - marked #[stable]
* move_val_init - renamed to overwrite and marked #[stable]
* {from,to}_{be,le}{16,32,64} - all functions marked #[stable]
* swap/replace/drop - marked #[stable]
* size_of_val/min_align_of_val/align_of_val - these functions are marked
#[unstable], but will continue to exist in some form. Concerns have been
raised about their `_val` prefix.
[breaking-change]
|
|
|
|
The `std::rt::heap` API is Rust's global allocator, so there's no need
to have this as a separate API.
|
|
This commit revisits the `cast` module in libcore and libstd, and scrutinizes
all functions inside of it. The result was to remove the `cast` module entirely,
folding all functionality into the `mem` module. Specifically, this is the fate
of each function in the `cast` module.
* transmute - This function was moved to `mem`, but it is now marked as
#[unstable]. This is due to planned changes to the `transmute`
function and how it can be invoked (see the #[unstable] comment).
For more information, see RFC 5 and #12898
* transmute_copy - This function was moved to `mem`, with clarification that is
is not an error to invoke it with T/U that are different
sizes, but rather that it is strongly discouraged. This
function is now #[stable]
* forget - This function was moved to `mem` and marked #[stable]
* bump_box_refcount - This function was removed due to the deprecation of
managed boxes as well as its questionable utility.
* transmute_mut - This function was previously deprecated, and removed as part
of this commit.
* transmute_mut_unsafe - This function doesn't serve much of a purpose when it
can be achieved with an `as` in safe code, so it was
removed.
* transmute_lifetime - This function was removed because it is likely a strong
indication that code is incorrect in the first place.
* transmute_mut_lifetime - This function was removed for the same reasons as
`transmute_lifetime`
* copy_lifetime - This function was moved to `mem`, but it is marked
`#[unstable]` now due to the likelihood of being removed in
the future if it is found to not be very useful.
* copy_mut_lifetime - This function was also moved to `mem`, but had the same
treatment as `copy_lifetime`.
* copy_lifetime_vec - This function was removed because it is not used today,
and its existence is not necessary with DST
(copy_lifetime will suffice).
In summary, the cast module was stripped down to these functions, and then the
functions were moved to the `mem` module.
transmute - #[unstable]
transmute_copy - #[stable]
forget - #[stable]
copy_lifetime - #[unstable]
copy_mut_lifetime - #[unstable]
[breaking-change]
|
|
In stage0, all allocations are 8-byte aligned. Passing a size and
alignment to free is not yet implemented everywhere (0 size and 8 align
are used as placeholders). Fixing this is part of #13994.
Closes #13616
|
|
There was no reason to remove them from slice. They're testing methods
defined in slice, so that's where they belong.
Leave vec with copies of the partition/partitioned tests because it has
its own implementation of those methods.
|
|
API Changes:
- &[T] and ~[T] no longer support the addition operator (+)
|
|
|
|
Adding two vectors now results in a Vec<T> instead of a ~[T].
Implement Add on Vec<T>.
|
|
|
|
Change from_buf_raw() to return a Vec<T> instead of a ~[T]. As such, it
belongs in vec, in the newly-created vec::raw module.
|
|
unzip() has nothing to do with slices, so it belongs in vec.
|
|
A few methods in slice that used to return ~[T] now return Vec<T>:
- VectorVector.concat/connect_vec() returns Vec<T>
- slice::unzip() returns (Vec<T>, Vec<U>)
- ImmutableCloneableVector.partitioned() returns (Vec<T>, Vec<T>)
- OwnedVector.partition() returns (Vec<T>, Vec<T>)
|
|
This used to create a Vec<T> and then call .move_iter().collect() to
convert to a ~[T]. We can't do that anymore, so construct the ~[T] in
place instead. This has the added benefit of avoiding an unnecessary
memory copy (from the Vec<T> to the ~[T]).
|
|
|
|
This commit adds a new trait, MutableVectorAllocating, which represents
functions on vectors which can allocate.
This is another extension trait to slices which should be removed once a lang
item exists for the ~ allocation.
|
|
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
r? @brson or @alexcrichton or whoever
|
|
Lots of assorted things here and there, all the details are in the commits.
Closes #11712
|
|
for `~str`/`~[]`.
Note that `~self` still remains, since I forgot to add support for
`Box<self>` before the snapshot.
How to update your code:
* Instead of `~EXPR`, you should write `box EXPR`.
* Instead of `~TYPE`, you should write `Box<Type>`.
* Instead of `~PATTERN`, you should write `box PATTERN`.
[breaking-change]
|
|
Turning a `&T` into an `&mut T` carries a large risk of undefined
behaviour, and needs to be done very very carefully. Providing a
convenience function for exactly this task is a bad idea, just tempting
people into doing the wrong thing.
The right thing is to use types like `Cell`, `RefCell` or `Unsafe`.
For memory safety, Rust has that guarantee that `&mut` pointers do not
alias with any other pointer, that is, if you have a `&mut T` then that
is the only usable pointer to that `T`. This allows Rust to assume that
writes through a `&mut T` do not affect the values of any other `&` or
`&mut` references. `&` pointers have no guarantees about aliasing or
not, so it's entirely possible for the same pointer to be passed into
both arguments of a function like
fn foo(x: &int, y: &int) { ... }
Converting either of `x` or `y` to a `&mut` pointer and modifying it
would affect the other value: invalid behaviour.
(Similarly, it's undefined behaviour to modify the value of an immutable
local, like `let x = 1;`.)
At a low-level, the *only* safe way to obtain an `&mut` out of a `&` is
using the `Unsafe` type (there are higher level wrappers around it, like
`Cell`, `RefCell`, `Mutex` etc.). The `Unsafe` type is registered with
the compiler so that it can reason a little about these `&` to `&mut`
casts, but it is still up to the user to ensure that the `&mut`s
obtained out of an `Unsafe` never alias.
(Note that *any* conversion from `&` to `&mut` can be invalid, including
a plain `transmute`, or casting `&T` -> `*T` -> `*mut T` -> `&mut T`.)
[breaking-change]
|
|
This primary fix brought on by this upgrade is the proper matching of the ```
and ~~~ doc blocks. This also moves hoedown to a git submodule rather than a
bundled repository.
Additionally, hoedown is stricter about code blocks, so this ended up fixing a
lot of invalid code blocks (ending with " ```" instead of "```", or ending with
"~~~~" instead of "~~~").
Closes #12776
|
|
|
|
provided (everywhere but treemap)
This commit deprecates rev_iter, mut_rev_iter, move_rev_iter everywhere (except treemap) and also
deprecates related functions like rsplit, rev_components, and rev_str_components. In every case,
these functions can be replaced with the non-reversed form followed by a call to .rev(). To make this
more concrete, a translation table for all functional changes necessary follows:
* container.rev_iter() -> container.iter().rev()
* container.mut_rev_iter() -> container.mut_iter().rev()
* container.move_rev_iter() -> container.move_iter().rev()
* sliceorstr.rsplit(sep) -> sliceorstr.split(sep).rev()
* path.rev_components() -> path.components().rev()
* path.rev_str_components() -> path.str_components().rev()
In terms of the type system, this change also deprecates any specialized reversed iterator types (except
in treemap), opting instead to use Rev directly if any type annotations are needed. However, since
methods directly returning reversed iterators are now discouraged, the need for such annotations should
be small. However, in those cases, the general pattern for conversion is to take whatever follows Rev in
the original reversed name and surround it with Rev<>:
* RevComponents<'a> -> Rev<Components<'a>>
* RevStrComponents<'a> -> Rev<StrComponents<'a>>
* RevItems<'a, T> -> Rev<Items<'a, T>>
* etc.
The reasoning behind this change is that it makes the standard API much simpler without reducing readability,
performance, or power. The presence of functions such as rev_iter adds more boilerplate code to libraries
(all of which simply call .iter().rev()), clutters up the documentation, and only helps code by saving two
characters. Additionally, the numerous type synonyms that were used to make the type signatures look nice
like RevItems add even more boilerplate and clutter up the docs even more. With this change, all that cruft
goes away.
[breaking-change]
|
|
&[T]::split and &[T]::rsplit
This makes the splitting functions in std::slice return DoubleEndedIterators. Unfortunately,
splitn and rsplitn cannot provide such an interface and so must return different types. As a
result, the following changes were made:
* RevSplits was removed in favor of explicitly using Rev
* Splits can no longer bound the number of splits done
* Splits now implements DoubleEndedIterator
* SplitsN was added, taking the role of what both Splits and RevSplits used to be
* rsplit returns Rev<Splits<'a, T>> instead of RevSplits<'a, T>
* splitn returns SplitsN<'a, T> instead of Splits<'a, T>
* rsplitn returns SplitsN<'a, T> instead of RevSplits<'a, T>
All functions that were previously implemented on each return value still are, so outside of changing
of type annotations, existing code should work out of the box. In the rare case that code relied
on the return types of split and splitn or of rsplit and rsplitn being the same, the previous
behavior can be emulated by calling splitn or rsplitn with a bount of uint::MAX.
The value of this change comes in multiple parts:
* Consistency. The splitting code in std::str is structured similarly to the new slice splitting code,
having separate CharSplits and CharSplitsN types.
* Smaller API. Although this commit doesn't implement it, using a DoubleEndedIterator for splitting
means that rsplit, path::RevComponents, path::RevStrComponents, Path::rev_components, and
Path::rev_str_components are no longer needed - they can be emulated simply with .rev().
* Power. DoubleEndedIterators are able to traverse the list from both sides at once instead of only
forwards or backwards.
* Efficiency. For the common case of using split instead of splitn, the iterator is slightly smaller
and slightly faster.
[breaking-change]
|
|
updating size_hints.
Fixes #13734 and #13759.
|
|
This alters the borrow checker's requirements on invoking closures from
requiring an immutable borrow to requiring a unique immutable borrow. This means
that it is illegal to invoke a closure through a `&` pointer because there is no
guarantee that is not aliased. This does not mean that a closure is required to
be in a mutable location, but rather a location which can be proven to be
unique (often through a mutable pointer).
For example, the following code is unsound and is no longer allowed:
type Fn<'a> = ||:'a;
fn call(f: |Fn|) {
f(|| {
f(|| {})
});
}
fn main() {
call(|a| {
a();
});
}
There is no replacement for this pattern. For all closures which are stored in
structures, it was previously allowed to invoke the closure through `&self` but
it now requires invocation through `&mut self`.
The standard library has a good number of violations of this new rule, but the
fixes will be separated into multiple breaking change commits.
Closes #12224
|
|
This fixes various issues throughout the standard distribution and tests.
|
|
Many iterators go through a closure when dealing with the `idx` method, which
are invalid after the previous change (closures cannot be invoked through a `&`
pointer). This commit alters the `fn idx` method on the RandomAccessIterator
to take `&mut self` rather than `&self`.
[breaking-change]
|
|
|
|
|
|
This removes all resizability support for ~[T] vectors in preparation of DST.
The only growable vector remaining is Vec<T>. In summary, the following methods
from ~[T] and various functions were removed. Each method/function has an
equivalent on the Vec type in std::vec unless otherwise stated.
* slice::OwnedCloneableVector
* slice::OwnedEqVector
* slice::append
* slice::append_one
* slice::build (no replacement)
* slice::bytes::push_bytes
* slice::from_elem
* slice::from_fn
* slice::with_capacity
* ~[T].capacity()
* ~[T].clear()
* ~[T].dedup()
* ~[T].extend()
* ~[T].grow()
* ~[T].grow_fn()
* ~[T].grow_set()
* ~[T].insert()
* ~[T].pop()
* ~[T].push()
* ~[T].push_all()
* ~[T].push_all_move()
* ~[T].remove()
* ~[T].reserve()
* ~[T].reserve_additional()
* ~[T].reserve_exect()
* ~[T].retain()
* ~[T].set_len()
* ~[T].shift()
* ~[T].shrink_to_fit()
* ~[T].swap_remove()
* ~[T].truncate()
* ~[T].unshift()
* ~str.clear()
* ~str.set_len()
* ~str.truncate()
Note that no other API changes were made. Existing apis that took or returned
~[T] continue to do so.
[breaking-change]
|
|
|
|
|
|
Closures did not have their bounds printed at all, nor their lifetimes. Trait
bounds were also printed in angle brackets rather than after a colon with a '+'
inbetween them.
Note that on the current task::spawn [1] documentation page, there is no mention
of a `Send` bound even though it is crucially important!
[1] - http://static.rust-lang.org/doc/master/std/task/fn.task.html
|
|
Closes #12640
|
|
|
|
|
|
There are a few instances of them in tests which are using functions
from std etc. that still are using ~[].
|
|
|
|
|
|
|
|
Closes #2569
|
|
Summary:
So far, we've used the term POD "Plain Old Data" to refer to types that
can be safely copied. However, this term is not consistent with the
other built-in bounds that use verbs instead. This patch renames the Pod
kind into Copy.
RFC: 0003-opt-in-builtin-traits
Test Plan: make check
Reviewers: cmr
Differential Revision: http://phabricator.octayn.net/D3
|
